SCIENTIFIC PUBLICATIONS

You are researching:
Matching entries: 564 /564
All Groups
AUTHOR Barceló, Xavier and Eichholz, Kian F. and Gonçalves, Inês F. and Garcia, Orquidea and Kelly, Daniel J.
Title Bioprinting of structurally organized meniscal tissue within anisotropic melt electrowritten scaffolds [Abstract]
Year 2023
Journal/Proceedings Acta Biomaterialia
Reftype
DOI/URL URL DOI
Abstract
The meniscus is characterised by an anisotropic collagen fibre network which is integral to its biomechanical functionality. The engineering of structurally organized meniscal grafts that mimic the anisotropy of the native tissue remains a significant challenge. In this study, inkjet bioprinting was used to deposit a cell-laden bioink into additively manufactured scaffolds of differing architectures to engineer fibrocartilage grafts with user defined collagen architectures. Polymeric scaffolds consisting of guiding fibre networks with varying aspect ratios (1:1; 1:4; 1:16) were produced using either fused deposition modelling (FDM) or melt electrowriting (MEW), resulting in scaffolds with different internal architectures and fibre diameters. Scaffold architecture was found to influence the spatial organization of the collagen network laid down by the jetted cells, with higher aspect ratios (1:4 and 1:16) supporting the formation of structurally anisotropic tissues. The MEW scaffolds supported the development of a fibrocartilaginous tissue with compressive mechanical properties similar to that of native meniscus, while the anisotropic tensile properties of these constructs could be tuned by altering the fibre network aspect ratio. This MEW framework was then used to generate scaffolds with spatially distinct fibre patterns, which in turn supported the development of heterogenous tissues consisting of isotropic and anisotropic collagen networks. Such bioprinted tissues could potentially form the basis of new treatment options for damaged and diseased meniscal tissue. Statement of significance This study describes a multiple tool biofabrication strategy which enables the engineering of spatially organized fibrocartilage tissues. The architecture of MEW scaffolds can be tailored to not only modulate the directionality of the collagen fibres laid down by cells, but also to tune the anisotropic tensile mechanical properties of the resulting constructs, thereby enabling the engineering of biomimetic meniscal-like tissues. Furthermore, the inherent flexibility of MEW enables the development of zonally defined and potentially patient-specific implants.
AUTHOR Ainsworth, Madison Jade and Chirico, Nino and de Ruijter, Mylène and Hrynevich, Andrei and Dokter, Inge and Sluijter, Joost P. G. and Malda, Jos and van Mil, Alain and Castilho, Miguel
Title Convergence of melt electrowriting and extrusion-based bioprinting for vascular patterning of a myocardial construct [Abstract]
Year 2023
Journal/Proceedings Biofabrication
Reftype
DOI/URL DOI
Abstract
To progress cardiac tissue engineering strategies closer to the clinic, thicker constructs are required to meet the functional need following a cardiac event. Consequently, pre-vascularization of these constructs needs to be investigated to ensure survival and optimal performance of implantable engineered heart tissue. The aim of this research is to investigate the potential of combining extrusion-based bioprinting (EBB) and melt electrowriting for the fabrication of a myocardial construct with a precisely patterned pre-vascular pathway. Gelatin methacryloyl (GelMA) was investigated as a base hydrogel for the respective myocardial and vascular bioinks with collagen, Matrigel and fibrinogen as interpenetrating polymers to support myocardial functionality. Subsequently, extrusion-based printability and viability were investigated to determine the optimal processing parameters for printing into melt electrowritten meshes. Finally, an anatomically inspired vascular pathway was implemented in a dual EBB set-up into melt electrowritten meshes, creating a patterned pre-vascularized myocardial construct. It was determined that a blend of 5% GelMA and 0.8 mg·ml−1 collagen with a low crosslinked density was optimal for myocardial cellular arrangement and alignment within the constructs. For the vascular fraction, the optimized formulation consisted of 5% GelMA, 0.8 mg·ml−1 collagen and 1 mg·ml−1 fibrinogen with a higher crosslinked density, which led to enhanced vascular cell connectivity. Printability assessment confirmed that the optimized bioinks could effectively fill the microfiber mesh while supporting cell viability (∼70%). Finally, the two bioinks were applied using a dual EBB system for the fabrication of a pre-vascular pathway with the shape of a left anterior descending artery within a myocardial construct, whereby the distinct cell populations could be visualized in their respective patterns up to D14. This research investigated the first step towards developing a thick engineered cardiac tissue construct in which a pre-vascularization pathway is fabricated within a myocardial construct.
AUTHOR Ribezzi, Davide and Gueye, Marième and Florczak, Sammy and Dusi, Franziska and de Vos, Dieuwke and Manente, Francesca and Hierholzer, Andreas and Fussenegger, Martin and Caiazzo, Massimiliano and Blunk, Torsten and Malda, Jos and Levato, Riccardo
Title Shaping Synthetic Multicellular and Complex Multimaterial Tissues via Embedded Extrusion-Volumetric Printing of Microgels [Abstract]
Year 2023
Journal/Proceedings Advanced Materials
Reftype
DOI/URL URL DOI
Abstract
Abstract In living tissues, cells express their functions following complex signals from their surrounding microenvironment. Capturing both hierarchical architectures at the micro- and macroscale, and anisotropic cell patterning remains a major challenge in bioprinting, and a bottleneck towards creating physiologically-relevant models. Addressing this limitation, we introduced a novel technique, termed Embedded Extrusion-Volumetric Printing (EmVP), converging extrusion-bioprinting and layer-less, ultra-fast volumetric bioprinting, allowing to spatially pattern multiple inks/cell types. Light-responsive microgels were developed for the first time as bioresins (μResins) for light-based volumetric bioprinting, providing a microporous environment permissive for cell homing and self-organization. Tuning the mechanical and optical properties of gelatin-based microparticles enables their use as support bath for suspended extrusion printing, in which features containing high cell densities can be easily introduced. μResins can be sculpted within seconds with tomographic light projections into centimetre-scale, granular hydrogel-based, convoluted constructs. Interstitial microvoids enhanced differentiation of multiple stem/progenitor cells (vascular, mesenchymal, neural), otherwise not possible with conventional bulk hydrogels. As proof-of-concept, EmVP was applied to create complex synthetic biology-inspired intercellular communication models, where adipocyte differentiation is regulated by optogenetic-engineered pancreatic cells. Overall, EmVP offers new avenues for producing regenerative grafts with biological functionality, and for developing engineered living systems and (metabolic) disease models. This article is protected by copyright. All rights reserved
AUTHOR Daghrery, Arwa and Ferreira, Jessica A. and Xu, Jinping and Golafshan, Nasim and Kaigler, Darnell and Bhaduri, Sarit B. and Malda, Jos and Castilho, Miguel and Bottino, Marco C.
Title Tissue-specific melt electrowritten polymeric scaffolds for coordinated regeneration of soft and hard periodontal tissues [Abstract]
Year 2023
Journal/Proceedings Bioactive Materials
Reftype
DOI/URL URL DOI
Abstract
Periodontitis is a chronic inflammatory condition that often causes serious damage to tooth-supporting tissues. The limited successful outcomes of clinically available approaches underscore the need for therapeutics that cannot only provide structural guidance to cells but can also modulate the local immune response. Here, three-dimensional melt electrowritten (i.e., poly(ε-caprolactone)) scaffolds with tissue-specific attributes were engineered to guide differentiation of human-derived periodontal ligament stem cells (hPDLSCs) and mediate macrophage polarization. The investigated tissue-specific scaffold attributes comprised fiber morphology (aligned vs. random) and highly-ordered architectures with distinct strand spacings (small 250 μm and large 500 μm). Macrophages exhibited an elongated morphology in aligned and highly-ordered scaffolds, while maintaining their round-shape on randomly-oriented fibrous scaffolds. Expressions of periostin and IL-10 were more pronounced on the aligned and highly-ordered scaffolds. While hPDLSCs on the scaffolds with 500 μm strand spacing show higher expression of osteogenic marker (Runx2) over 21 days, cells on randomly-oriented fibrous scaffolds showed upregulation of M1 markers. In an orthotopic mandibular fenestration defect model, findings revealed that the tissue-specific scaffolds (i.e., aligned fibers for periodontal ligament and highly-ordered 500 μm strand spacing fluorinated calcium phosphate [F/CaP]-coated fibers for bone) could enhance the mimicking of regeneration of natural periodontal tissues.
AUTHOR Daghrery, Arwa and Ferreira, Jessica A. and Xu, Jinping and Golafshan, Nasim and Kaigler, Darnell and Bhaduri, Sarit B. and Malda, Jos and Castilho, Miguel and Bottino, Marco C.
Title Tissue-specific melt electrowritten polymeric scaffolds for coordinated regeneration of soft and hard periodontal tissues [Abstract]
Year 2023
Journal/Proceedings Bioactive Materials
Reftype
DOI/URL URL DOI
Abstract
Periodontitis is a chronic inflammatory condition that often causes serious damage to tooth-supporting tissues. The limited successful outcomes of clinically available approaches underscore the need for therapeutics that cannot only provide structural guidance to cells but can also modulate the local immune response. Here, three-dimensional melt electrowritten (i.e., poly(ε-caprolactone)) scaffolds with tissue-specific attributes were engineered to guide differentiation of human-derived periodontal ligament stem cells (hPDLSCs) and mediate macrophage polarization. The investigated tissue-specific scaffold attributes comprised fiber morphology (aligned vs. random) and highly-ordered architectures with distinct strand spacings (small 250 μm and large 500 μm). Macrophages exhibited an elongated morphology in aligned and highly-ordered scaffolds, while maintaining their round-shape on randomly-oriented fibrous scaffolds. Expressions of periostin and IL-10 were more pronounced on the aligned and highly-ordered scaffolds. While hPDLSCs on the scaffolds with 500 μm strand spacing show higher expression of osteogenic marker (Runx2) over 21 days, cells on randomly-oriented fibrous scaffolds showed upregulation of M1 markers. In an orthotopic mandibular fenestration defect model, findings revealed that the tissue-specific scaffolds (i.e., aligned fibers for periodontal ligament and highly-ordered 500 μm strand spacing fluorinated calcium phosphate [F/CaP]-coated fibers for bone) could enhance the mimicking of regeneration of natural periodontal tissues.
AUTHOR Daghrery, Arwa and Ferreira, Jessica A. and Xu, Jinping and Golafshan, Nasim and Kaigler, Darnell and Bhaduri, Sarit B. and Malda, Jos and Castilho, Miguel and Bottino, Marco C.
Title Tissue-specific melt electrowritten polymeric scaffolds for coordinated regeneration of soft and hard periodontal tissues [Abstract]
Year 2023
Journal/Proceedings Bioactive Materials
Reftype
DOI/URL URL DOI
Abstract
Periodontitis is a chronic inflammatory condition that often causes serious damage to tooth-supporting tissues. The limited successful outcomes of clinically available approaches underscore the need for therapeutics that cannot only provide structural guidance to cells but can also modulate the local immune response. Here, three-dimensional melt electrowritten (i.e., poly(ε-caprolactone)) scaffolds with tissue-specific attributes were engineered to guide differentiation of human-derived periodontal ligament stem cells (hPDLSCs) and mediate macrophage polarization. The investigated tissue-specific scaffold attributes comprised fiber morphology (aligned vs. random) and highly-ordered architectures with distinct strand spacings (small 250 μm and large 500 μm). Macrophages exhibited an elongated morphology in aligned and highly-ordered scaffolds, while maintaining their round-shape on randomly-oriented fibrous scaffolds. Expressions of periostin and IL-10 were more pronounced on the aligned and highly-ordered scaffolds. While hPDLSCs on the scaffolds with 500 μm strand spacing show higher expression of osteogenic marker (Runx2) over 21 days, cells on randomly-oriented fibrous scaffolds showed upregulation of M1 markers. In an orthotopic mandibular fenestration defect model, findings revealed that the tissue-specific scaffolds (i.e., aligned fibers for periodontal ligament and highly-ordered 500 μm strand spacing fluorinated calcium phosphate [F/CaP]-coated fibers for bone) could enhance the mimicking of regeneration of natural periodontal tissues.
AUTHOR Daghrery, Arwa and Ferreira, Jessica A. and Xu, Jinping and Golafshan, Nasim and Kaigler, Darnell and Bhaduri, Sarit B. and Malda, Jos and Castilho, Miguel and Bottino, Marco C.
Title Tissue-specific melt electrowritten polymeric scaffolds for coordinated regeneration of soft and hard periodontal tissues [Abstract]
Year 2023
Journal/Proceedings Bioactive Materials
Reftype
DOI/URL URL DOI
Abstract
Periodontitis is a chronic inflammatory condition that often causes serious damage to tooth-supporting tissues. The limited successful outcomes of clinically available approaches underscore the need for therapeutics that cannot only provide structural guidance to cells but can also modulate the local immune response. Here, three-dimensional melt electrowritten (i.e., poly(ε-caprolactone)) scaffolds with tissue-specific attributes were engineered to guide differentiation of human-derived periodontal ligament stem cells (hPDLSCs) and mediate macrophage polarization. The investigated tissue-specific scaffold attributes comprised fiber morphology (aligned vs. random) and highly-ordered architectures with distinct strand spacings (small 250 μm and large 500 μm). Macrophages exhibited an elongated morphology in aligned and highly-ordered scaffolds, while maintaining their round-shape on randomly-oriented fibrous scaffolds. Expressions of periostin and IL-10 were more pronounced on the aligned and highly-ordered scaffolds. While hPDLSCs on the scaffolds with 500 μm strand spacing show higher expression of osteogenic marker (Runx2) over 21 days, cells on randomly-oriented fibrous scaffolds showed upregulation of M1 markers. In an orthotopic mandibular fenestration defect model, findings revealed that the tissue-specific scaffolds (i.e., aligned fibers for periodontal ligament and highly-ordered 500 μm strand spacing fluorinated calcium phosphate [F/CaP]-coated fibers for bone) could enhance the mimicking of regeneration of natural periodontal tissues.
AUTHOR Nothdurfter, Daniel and Ploner, Christian and Coraça-Huber, Débora C. and Wilflingseder, Doris and Müller, Thomas and Hermann, Martin and Hagenbuchner, Judith and Ausserlechner, Michael J.
Title 3D bioprinted, vascularized neuroblastoma tumor environment in fluidic chip devices for precision medicine drug testing [Abstract]
Year 2022
Journal/Proceedings Biofabrication
Reftype
DOI/URL DOI
Abstract
Neuroblastoma is an extracranial solid tumor which develops in early childhood and still has a poor prognosis. One strategy to increase cure rates is the identification of patient-specific drug responses in tissue models that mimic the interaction between patient cancer cells and tumor environment. We therefore developed a perfused and micro-vascularized tumor-environment model that is directly bioprinted into custom-manufactured fluidic chips. A gelatin-methacrylate/fibrin-based matrix containing multiple cell types mimics the tumor-microenvironment that promotes spontaneous micro-vessel formation by embedded endothelial cells. We demonstrate that both, adipocyte- and iPSC-derived mesenchymal stem cells can guide this process. Bioprinted channels are coated with endothelial cells post printing to form a dense vessel - tissue barrier. The tissue model thereby mimics structure and function of human soft tissue with endothelial cell-coated larger vessels for perfusion and micro-vessel networks within the hydrogel-matrix. Patient-derived neuroblastoma spheroids are added to the matrix during the printing process and grown for more than two weeks. We demonstrate that micro-vessels are attracted by and grow into tumor spheroids and that neuroblastoma cells invade the tumor-environment as soon as the spheroids disrupt. In summary, we describe the first bioprinted, micro-vascularized neuroblastoma – tumor-environment model directly printed into fluidic chips and a novel medium-throughput biofabrication platform suitable for studying tumor angiogenesis and metastasis in precision medicine approaches in future.
AUTHOR Terpstra, Margo L. and Li, Jinyu and Mensinga, Anneloes and de Ruijter, Myl{`{e}}ne and van Rijen, Mattie H. P. and Androulidakis, Charalampos and Galiotis, Costas and Papantoniou, Ioannis and Matsusaki, Michiya and Malda, Jos and Levato, Riccardo
Title Bioink with cartilage-derived extracellular matrix microfibers enables spatial control of vascular capillary formation in bioprinted constructs [Abstract]
Year 2022
Journal/Proceedings Biofabrication
Reftype
DOI/URL DOI
Abstract
Microvasculature is essential for the exchange of gas and nutrient for most tissues in our body. Some tissue structures such as the meniscus presents spatially confined blood vessels adjacent to non-vascularized regions. In biofabrication, mimicking the spatial distribution of such vascular components is paramount, as capillary ingrowth into non-vascularized tissues can lead to tissue matrix alterations and subsequent pathology. Multi-material three-dimensional (3D) bioprinting strategies have the potential to resolve anisotropic tissue features, although building complex constructs comprising stable vascularized and non-vascularized regions remains a major challenge to date. In this study, we developed endothelial cell-laden pro- and anti-angiogenic bioinks, supplemented with bioactive matrix-derived microfibers (MFs) that were created from type I collagen sponges (col-1) and cartilage decellularized extracellular matrix (CdECM), respectively. Human umbilical vein endothelial cell (HUVEC)-driven capillary networks started to form 2 d after bioprinting. Supplementing cartilage-derived MFs to endothelial-cell laden bioinks reduced the total length of neo-microvessels by 29%, and the number of microvessel junctions by 37% after 14 d, compared to bioinks with pro-angiogenic col-1 MFs. As a proof of concept, the bioinks were bioprinted into an anatomical meniscus shape with a biomimetic vascularized outer and non-vascularized inner region, using a gellan gum microgel suspension bath. These 3D meniscus-like constructs were cultured up to 14 d, with in the outer zone the HUVEC-, mural cell-, and col-1 MF-laden pro-angiogenic bioink, and in the inner zone a meniscus progenitor cell (MPC)- and CdECM MF-laden anti-angiogenic bioink, revealing successful spatial confinement of the nascent vascular network only in the outer zone. Further, to co-facilitate both microvessel formation and MPC-derived matrix formation, we formulated cell culture medium conditions with a temporal switch. Overall, this study provides a new strategy that could be applied to develop zonal biomimetic meniscal constructs. Moreover, the use of ECM-derived MFs to promote or inhibit capillary networks opens new possibilities for the biofabrication of tissues with anisotropic microvascular distribution. These have potential for many applications including in vitro models of vascular-to-avascular tissue interfaces, cancer progression, and for testing anti-angiogenic therapies.
AUTHOR Dufour, A. and Gallostra, X. Barceló and O'Keeffe, C. and Eichholz, K. and Von Euw, S. and Garcia, O. and Kelly, D. J.
Title Integrating melt electrowriting and inkjet bioprinting for engineering structurally organized articular cartilage [Abstract]
Year 2022
Journal/Proceedings Biomaterials
Reftype
DOI/URL URL DOI
Abstract
Successful cartilage engineering requires the generation of biological grafts mimicking the structure, composition and mechanical behaviour of the native tissue. Here melt electrowriting (MEW) was used to produce arrays of polymeric structures whose function was to orient the growth of cellular aggregates spontaneously generated within these structures, and to provide tensile reinforcement to the resulting tissues. Inkjet printing was used to deposit defined numbers of cells into MEW structures, which self-assembled into an organized array of spheroids within hours, ultimately generating a hybrid tissue that was hyaline-like in composition. Structurally, the engineered cartilage mimicked the histotypical organization observed in skeletally immature synovial joints. This biofabrication framework was then used to generate scaled-up (50 mm × 50 mm) cartilage implants containing over 3,500 cellular aggregates in under 15 min. After 8 weeks in culture, a 50-fold increase in the compressive stiffness of these MEW reinforced tissues were observed, while the tensile properties were still dominated by the polymer network, resulting in a composite construct demonstrating tension-compression nonlinearity mimetic of the native tissue. Helium ion microscopy further demonstrated the development of an arcading collagen network within the engineered tissue. This hybrid bioprinting strategy provides a versatile and scalable approach to engineer cartilage biomimetic grafts for biological joint resurfacing.
AUTHOR D'Agostino, Stefania and Rimann, Markus and Gamba, Piergiorgio and Perilongo, Giorgio and Pozzobon, Michela and Raghunath, Michael
Title Macromolecular crowding tuned extracellular matrix deposition in a bioprinted human rhabdomyosarcoma model [Abstract]
Year 2022
Journal/Proceedings Bioprinting
Reftype
DOI/URL URL DOI
Abstract
The role of the extracellular matrix (ECM) in tumor recurrence and metastasis has been gaining attention. Indeed, not only cellular, but also structural proteins influence migratory and invasive capacity of tumor cells, including growth and resistance to drugs. Therefore, new in vitro tumor models that entail improved ECM formation and deposition are needed. Here, we are developed three-dimensional (3D) models of pediatric soft tissue sarcoma (Rhabdomyosarcoma [RMS]) with the two major subgroups, the embryonal (ERMS) and the alveolar (ARMS) form. We applied macromolecular crowding (MMC) technology to monolayer cultures, spheroids, and 3D bioprinted constructs. In all culture models, exposure to MMC significantly increased ECM deposition. Interestingly, bioprinted constructs showed a collagen and fibronectin matrix architecture that was comparable to that of tumor xenografts. Furthermore, the bioprinted model not only showed tumor cell growth inside the structure but also displayed cell clusters leaving the edges of the bioprinted construct, probably emulating a metastatic mechanism. ARMS and ERMS cells reacted differently in the bioprinted structure. Indeed, the characteristic metastatic behavior was much more pronounced in the more aggressive ARMS subtype. This promising approach opens new avenues for studying RMS microenvironment and creating a platform for cancer drug testing including the native tumor ECM.
AUTHOR Daghrery, Arwa and Ferreira, Jessica A. and de Souza Araújo, Isaac J. and Clarkson, Brian H. and Eckert, George J. and Bhaduri, Sarit B. and Malda, Jos and Bottino, Marco C.
Title A Highly Ordered, Nanostructured Fluorinated CaP-Coated Melt Electrowritten Scaffold for Periodontal Tissue Regeneration [Abstract]
Year 2021
Journal/Proceedings Advanced Healthcare Materials
Reftype
DOI/URL DOI
Abstract
Abstract Periodontitis is a chronic inflammatory, bacteria-triggered disorder affecting nearly half of American adults. Although some level of tissue regeneration is realized, its low success in complex cases demands superior strategies to amplify regenerative capacity. Herein, highly ordered scaffolds are engineered via Melt ElectroWriting (MEW), and the effects of strand spacing, as well as the presence of a nanostructured fluorinated calcium phosphate (F/CaP) coating on the adhesion/proliferation, and osteogenic differentiation of human-derived periodontal ligament stem cells, are investigated. Upon initial cell-scaffold interaction screening aimed at defining the most suitable design, MEW poly(ε-caprolactone) scaffolds with 500 µm strand spacing are chosen. Following an alkali treatment, scaffolds are immersed in a pre-established solution to allow for coating formation. The presence of a nanostructured F/CaP coating leads to a marked upregulation of osteogenic genes and attenuated bacterial growth. In vivo findings confirm that the F/CaP-coated scaffolds are biocompatible and lead to periodontal regeneration when implanted in a rat mandibular periodontal fenestration defect model. In aggregate, it is considered that this work can contribute to the development of personalized scaffolds capable of enabling tissue-specific differentiation of progenitor cells, and thus guide simultaneous and coordinated regeneration of soft and hard periodontal tissues, while providing antimicrobial protection.
AUTHOR Habelt, Bettina and Wirth, Christopher and Afanasenkau, Dzmitry and Mihaylova, Lyudmila and Winter, Christine and Arvaneh, Mahnaz and Minev, Ivan R. and Bernhardt, Nadine
Title A Multimodal Neuroprosthetic Interface to Record, Modulate and Classify Electrophysiological Biomarkers Relevant to Neuropsychiatric Disorders [Abstract]
Year 2021
Journal/Proceedings Frontiers in Bioengineering and Biotechnology
Reftype
DOI/URL DOI
Abstract
Most mental disorders, such as addictive diseases or schizophrenia, are characterized by impaired cognitive function and behavior control originating from disturbances within prefrontal neural networks. Their often chronic reoccurring nature and the lack of efficient therapies necessitate the development of new treatment strategies. Brain-computer interfaces, equipped with multiple sensing and stimulation abilities, offer a new toolbox whose suitability for diagnosis and therapy of mental disorders has not yet been explored. This study, therefore, aimed to develop a biocompatible and multimodal neuroprosthesis to measure and modulate prefrontal neurophysiological features of neuropsychiatric symptoms. We used a 3D-printing technology to rapidly prototype customized bioelectronic implants through robot-controlled deposition of soft silicones and a conductive platinum ink. We implanted the device epidurally above the medial prefrontal cortex of rats and obtained auditory event-related brain potentials in treatment-naïve animals, after alcohol administration and following neuromodulation through implant-driven electrical brain stimulation and cortical delivery of the anti-relapse medication naltrexone. Towards smart neuroprosthetic interfaces, we furthermore developed machine learning algorithms to autonomously classify treatment effects within the neural recordings. The neuroprosthesis successfully captured neural activity patterns reflecting intact stimulus processing and alcohol-induced neural depression. Moreover, implant-driven electrical and pharmacological stimulation enabled successful enhancement of neural activity. A machine learning approach based on stepwise linear discriminant analysis was able to deal with sparsity in the data and distinguished treatments with high accuracy. Our work demonstrates the feasibility of multimodal bioelectronic systems to monitor, modulate and identify healthy and affected brain states with potential use in a personalized and optimized therapy of neuropsychiatric disorders.
AUTHOR Bouwmeester, Manon C. and Bernal, Paulina N. and Oosterhoff, Loes A. and van Wolferen, Monique E. and Lehmann, Vivian and Vermaas, Monique and Buchholz, Maj-Britt and Peiffer, Quentin C. and Malda, Jos and van der Laan, Luc J. W. and Kramer, Nynke I. and Schneeberger, Kerstin and Levato, Riccardo and Spee, Bart
Title Bioprinting of Human Liver-Derived Epithelial Organoids for Toxicity Studies [Abstract]
Year 2021
Journal/Proceedings Macromolecular Bioscience
Reftype
DOI/URL DOI
Abstract
Abstract There is a need for long-lived hepatic in vitro models to better predict drug induced liver injury (DILI). Human liver-derived epithelial organoids are a promising cell source for advanced in vitro models. Here, organoid technology is combined with biofabrication techniques, which holds great potential for the design of in vitro models with complex and customizable architectures. Here, porous constructs with human hepatocyte-like cells derived from organoids are generated using extrusion-based printing technology. Cell viability of bioprinted organoids remains stable for up to ten days (88–107% cell viability compared to the day of printing). The expression of hepatic markers, transporters, and phase I enzymes increased compared to undifferentiated controls, and is comparable to non-printed controls. Exposure to acetaminophen, a well-known hepatotoxic compound, decreases cell viability of bioprinted liver organoids to 21–51% (p < 0.05) compared to the start of exposure, and elevated levels of damage marker miR-122 are observed in the culture medium, indicating the potential use of the bioprinted constructs for toxicity testing. In conclusion, human liver-derived epithelial organoids can be combined with a biofabrication approach, thereby paving the way to create perfusable, complex constructs which can be used as toxicology- and disease-models.
AUTHOR Ng, Wei Long and Ayi, Teck Choon and Liu, Yi-Chun and Sing, Swee Leong and Yeong, Wai Yee and Tan, Boon-Huan
Title Fabrication and Characterization of 3D Bioprinted Triple-layered Human Alveolar Lung Models [Abstract]
Year 2021
Journal/Proceedings International journal of bioprinting
Reftype
DOI/URL URL
Abstract
The global prevalence of respiratory diseases caused by infectious pathogens has resulted in an increased demand for realistic in-vitro alveolar lung models to serve as suitable disease models. This demand has resulted in the fabrication of numerous two-dimensional (2D) and three-dimensional (3D) in-vitro alveolar lung models. The ability to fabricate these 3D in-vitro alveolar lung models in an automated manner with high repeatability and reliability is important for potential scalable production. In this study, we reported the fabrication of human triple-layered alveolar lung models comprising of human lung epithelial cells, human endothelial cells, and human lung fibroblasts using the drop-on-demand (DOD) 3D bioprinting technique. The polyvinylpyrrolidone-based bio-inks and the use of a 300 mm nozzle diameter improved the repeatability of the bioprinting process by achieving consistent cell output over time using different human alveolar lung cells. The 3D bioprinted human triple-layered alveolar lung models were able to maintain cell viability with relative similar proliferation profile over time as compared to non-printed cells. This DOD 3D bioprinting platform offers an attractive tool for highly repeatable and scalable fabrication of 3D in-vitro human alveolar lung models.
AUTHOR Alave Reyes-Furrer, Angela and De Andrade, Sonia and Bachmann, Dominic and Jeker, Heidi and Steinmann, Martin and Accart, Nathalie and Dunbar, Andrew and Rausch, Martin and Bono, Epifania and Rimann, Markus and Keller, Hansjoerg
Title Matrigel 3D bioprinting of contractile human skeletal muscle models recapitulating exercise and pharmacological responses [Abstract]
Year 2021
Journal/Proceedings Communications Biology
Reftype Alave Reyes-Furrer2021
DOI/URL DOI
Abstract
A key to enhance the low translatability of preclinical drug discovery are in vitro human three-dimensional (3D) microphysiological systems (MPS). Here, we show a new method for automated engineering of 3D human skeletal muscle models in microplates and functional compound screening to address the lack of muscle wasting disease medication. To this end, we adapted our recently described 24-well plate 3D bioprinting platform with a printhead cooling system to allow microvalve-based drop-on-demand printing of cell-laden Matrigel containing primary human muscle precursor cells. Mini skeletal muscle models develop within a week exhibiting contractile, striated myofibers aligned between two attachment posts. As an in vitro exercise model, repeated high impact stimulation of contractions for 3 h by a custom-made electrical pulse stimulation (EPS) system for 24-well plates induced interleukin-6 myokine expression and Akt hypertrophy pathway activation. Furthermore, the known muscle stimulators caffeine and Tirasemtiv acutely increase EPS-induced contractile force of the models. This validated new human muscle MPS will benefit development of drugs against muscle wasting diseases. Moreover, our Matrigel 3D bioprinting platform will allow engineering of non-self-organizing complex human 3D MPS.
AUTHOR He, Shaolong and Radeke, Carmen and Jacobsen, Jette and Lind, Johan Ulrik and Mu, Huiling
Title Multi-material 3D printing of programmable and stretchable oromucosal patches for delivery of saquinavir [Abstract]
Year 2021
Journal/Proceedings International Journal of Pharmaceutics
Reftype
DOI/URL URL DOI
Abstract
Oromucosal patches for drug delivery allow fast onset of action and ability to circumvent hepatic first pass metabolism of drugs. While conventional fabrication methods such as solvent casting or hot melt extrusion are ideal for scalable production of low-cost delivery patches, these methods chiefly allow for simple, homogenous patch designs. As alternative, a multi-material direct-ink-write 3D printing for rapid fabrication of complex oromucosal patches with unique design features was demonstrated in the present study. Specifically, three print-materials: an acidic saquinavir-loaded hydroxypropyl methylcellulose ink, an alkaline effervescent sodium carbonate-loaded ink, and a methyl cellulose backing material were combined in various designs. The CO2 content and pH of the microenvironment were controlled by adjusting the number of alkaline layers in the patch. Additionally, the rigid and brittle patches were converted to compliant and stretchable patches by implementing mesh-like designs. Our results illustrate how 3D printing can be used for rapid design and fabrication of multifunctional or customized oromucosal patches with tailored dosages and changed drug permeation.
AUTHOR Asulin, Masha and Michael, Idan and Shapira, Assaf and Dvir, Tal
Title One-Step 3D Printing of Heart Patches with Built-In Electronics for Performance Regulation [Abstract]
Year 2021
Journal/Proceedings Advanced Science
Reftype
DOI/URL DOI
Abstract
Abstract Three dimensional (3D) printing of heart patches usually provides the ability to precisely control cell location in 3D space. Here, one-step 3D printing of cardiac patches with built-in soft and stretchable electronics is reported. The tissue is simultaneously printed using three distinct bioinks for the cells, for the conducting parts of the electronics and for the dielectric components. It is shown that the hybrid system can withstand continuous physical deformations as those taking place in the contracting myocardium. The electronic patch is flexible, stretchable, and soft, and the electrodes within the printed patch are able to monitor the function of the engineered tissue by providing extracellular potentials. Furthermore, the system allowed controlling tissue function by providing electrical stimulation for pacing. It is envisioned that such transplantable patches may regain heart contractility and allow the physician to monitor the implant function as well as to efficiently intervene from afar when needed.
AUTHOR Madiedo-Podvrsan, Sabrina and Belaïdi, Jean-Philippe and Desbouis, Stephanie and Simonetti, Lucie and Ben-Khalifa, Youcef and Soeur, Jérémie and Rielland, Maïté
Title Utilization of patterned bioprinting for heterogeneous and physiologically representative reconstructed epidermal skin models [Abstract]
Year 2021
Journal/Proceedings Scientific Reports
Reftype Madiedo-Podvrsan2021
DOI/URL DOI
Abstract
Organotypic skin tissue models have decades of use for basic research applications, the treatment of burns, and for efficacy/safety evaluation studies. The complex and heterogeneous nature of native human skin however creates difficulties for the construction of physiologically comparable organotypic models. Within the present study, we utilized bioprinting technology for the controlled deposition of separate keratinocyte subpopulations to create a reconstructed epidermis with two distinct halves in a single insert, each comprised of a different keratinocyte sub-population, in order to better model heterogonous skin and reduce inter-sample variability. As an initial proof-of-concept, we created a patterned epidermal skin model using GPF positive and negative keratinocyte subpopulations, both printed into 2 halves of a reconstructed skin insert, demonstrating the feasibility of this approach. We then demonstrated the physiological relevance of this bioprinting technique by generating a heterogeneous model comprised of dual keratinocyte population with either normal or low filaggrin expression. The resultant model exhibited a well-organized epidermal structure with each half possessing the phenotypic characteristics of its constituent cells, indicative of a successful and stable tissue reconstruction. This patterned skin model aims to mimic the edge of lesions as seen in atopic dermatitis or ichthyosis vulgaris, while the use of two populations within a single insert allows for paired statistics in evaluation studies, likely increasing study statistical power and reducing the number of models required per study. This is the first report of human patterned epidermal model using a predefined bioprinted designs, and demonstrates the relevance of bioprinting to faithfully reproduce human skin microanatomy.
AUTHOR Kajtez, Janko and Buchmann, Sebastian and Vasudevan, Shashank and Birtele, Marcella and Rocchetti, Stefano and Pless, Christian Jonathan and Heiskanen, Arto and Barker, Roger A. and Martínez-Serrano, Alberto and Parmar, Malin and Lind, Johan Ulrik and Emnéus, Jenny
Title 3D-Printed Soft Lithography for Complex Compartmentalized Microfluidic Neural Devices [Abstract]
Year 2020
Journal/Proceedings Advanced Science
Reftype
DOI/URL DOI
Abstract
Abstract Compartmentalized microfluidic platforms are an invaluable tool in neuroscience research. However, harnessing the full potential of this technology remains hindered by the lack of a simple fabrication approach for the creation of intricate device architectures with high-aspect ratio features. Here, a hybrid additive manufacturing approach is presented for the fabrication of open-well compartmentalized neural devices that provides larger freedom of device design, removes the need for manual postprocessing, and allows an increase in the biocompatibility of the system. Suitability of the method for multimaterial integration allows to tailor the device architecture for the long-term maintenance of healthy human stem-cell derived neurons and astrocytes, spanning at least 40 days. Leveraging fast-prototyping capabilities at both micro and macroscale, a proof-of-principle human in vitro model of the nigrostriatal pathway is created. By presenting a route for novel materials and unique architectures in microfluidic systems, the method provides new possibilities in biological research beyond neuroscience applications.
AUTHOR Browning, James R. and Derr, Paige and Derr, Kristy and Doudican, Nicole and Michael, Sam and Lish, Samantha R. and Taylor, Nicholas A. and Krueger, James G. and Ferrer, Marc and Carucci, John A. and Gareau, Daniel S.
Title A 3D biofabricated cutaneous squamous cell carcinoma tissue model with multi-channel confocal microscopy imaging biomarkers to quantify antitumor effects of chemotherapeutics in tissue [Abstract]
Year 2020
Journal/Proceedings Oncotarget; Vol 11, No 27
Reftype
DOI/URL URL
Abstract
// James R. Browning 1 , Paige Derr 2 , Kristy Derr 2 , Nicole Doudican 3 , Sam Michael 2 , Samantha R. Lish 1 , Nicholas A. Taylor 3 , James G. Krueger 1 , Marc Ferrer 2 , John A. Carucci 3 and Daniel S. Gareau 1 1 Laboratory for Investigative Dermatology, The Rockefeller University, New York, New York, USA 2 National Center for Advancing Translational Sciences, National Institutes of Health, Rockville, Maryland, USA 3 The Ronald O. Perelman Department of Dermatology, New York University School of Medicine, New York, New York, USA Correspondence to: Daniel S. Gareau, email: dgareau@rockefeller.edu Keywords: squamous cell carcinoma; screening; 3D printing; in vitro model; confocal microscopy Received: January 05, 2020     Accepted: April 03, 2020     Published: July 07, 2020 ABSTRACT Cutaneous squamous cell carcinoma (cSCC) causes approximately 10,000 deaths annually in the U. S. Current therapies are largely ineffective against metastatic and locally advanced cSCC. There is a need to identify novel, effective, and less toxic small molecule cSCC therapeutics. We developed a 3-dimensional bioprinted skin (3DBPS) model of cSCC tumors together with a microscopy assay to test chemotherapeutic effects in tissue. The full thickness SCC tissue model was validated using hematoxylin and eosin (H&E) and immunohistochemical histological staining, confocal microscopy, and cDNA microarray analysis. A nondestructive, 3D fluorescence confocal imaging assay with tdTomato-labeled A431 SCC and ZsGreen-labeled keratinocytes was developed to test efficacy and general toxicity of chemotherapeutics. Fluorescence-derived imaging biomarkers indicated that 50% of cancer cells were killed in the tissue after 1?M 5-Fluorouracil 48-hour treatment, compared to a baseline of 12% for untreated controls. The imaging biomarkers also showed that normal keratinocytes were less affected by treatment (11% killed) than the untreated tissue, which had no significant killing effect. Data showed that 5-Fluorouracil selectively killed cSCC cells more than keratinocytes. Our 3DBPS assay platform provides cellular-level measurement of cell viability and can be adapted to achieve nondestructive high-throughput screening (HTS) in bio-fabricated tissues.
AUTHOR Monferrer, Ezequiel and Martín-Vañó, Susana and Carretero, Aitor and García-Lizarribar, Andrea and Burgos-Panadero, Rebeca and Navarro, Samuel and Samitier, Josep and Noguera, Rosa
Title A three-dimensional bioprinted model to evaluate the effect of stiffness on neuroblastoma cell cluster dynamics and behavior [Abstract]
Year 2020
Journal/Proceedings Scientific Reports
Reftype Monferrer2020
DOI/URL DOI
Abstract
Three-dimensional (3D) bioprinted culture systems allow to accurately control microenvironment components and analyze their effects at cellular and tissue levels. The main objective of this study was to identify, quantify and localize the effects of physical-chemical communication signals between tumor cells and the surrounding biomaterial stiffness over time, defining how aggressiveness increases in SK-N-BE(2) neuroblastoma (NB) cell line. Biomimetic hydrogels with SK-N-BE(2) cells, methacrylated gelatin and increasing concentrations of methacrylated alginate (AlgMA 0%, 1% and 2%) were used. Young’s modulus was used to define the stiffness of bioprinted hydrogels and NB tumors. Stained sections of paraffin-embedded hydrogels were digitally quantified. Human NB and 1% AlgMA hydrogels presented similar Young´s modulus mean, and orthotopic NB mice tumors were equally similar to 0% and 1% AlgMA hydrogels. Porosity increased over time; cell cluster density decreased over time and with stiffness, and cell cluster occupancy generally increased with time and decreased with stiffness. In addition, cell proliferation, mRNA metabolism and antiapoptotic activity advanced over time and with stiffness. Together, this rheological, optical and digital data show the potential of the 3D in vitro cell model described herein to infer how intercellular space stiffness patterns drive the clinical behavior associated with NB patients.
AUTHOR Benmeridja, Lara and De Moor, Lise and De Maere, Elisabeth and Vanlauwe, Florian and Ryx, Michelle and Tytgat, Liesbeth and Vercruysse, Chris and Dubruel, Peter and Van Vlierberghe, Sandra and Blondeel, Phillip and Declercq, Heidi
Title High-throughput fabrication of vascularized adipose microtissues for 3D bioprinting [Abstract]
Year 2020
Journal/Proceedings Journal of Tissue Engineering and Regenerative Medicine
Reftype
DOI/URL DOI
Abstract
Abstract For patients with soft tissue defects, repair with autologous in vitro engineered adipose tissue could be a promising alternative to current surgical therapies. A volume-persistent engineered adipose tissue construct under in vivo conditions can only be achieved by early vascularization after transplantation. The combination of 3D bioprinting technology with self-assembling microvascularized units as building blocks can potentially answer the need for a microvascular network. In the present study, co-culture spheroids combining adipose-derived stem cells (ASC) and human umbilical vein endothelial cells (HUVEC) were created with an ideal geometry for bioprinting. When applying the favourable seeding technique and condition, compact viable spheroids were obtained, demonstrating high adipogenic differentiation and capillary-like network formation after 7 and 14 days of culture, as shown by live/dead analysis, immunohistochemistry and RT-qPCR. Moreover, we were able to successfully 3D bioprint the encapsulated spheroids, resulting in compact viable spheroids presenting capillary-like structures, lipid droplets and spheroid outgrowth after 14 days of culture. This is the first study that generates viable high-throughput (pre-)vascularized adipose microtissues as building blocks for bioprinting applications using a novel ASC/HUVEC co-culture spheroid model, which enables both adipogenic differentiation while simultaneously supporting the formation of prevascular-like structures within engineered tissues in vitro.
AUTHOR Dubey, Nileshkumar and Ferreira, Jessica A. and Daghrery, Arwa and Aytac, Zeynep and Malda, Jos and Bhaduri, Sarit B. and Bottino, Marco C.
Title Highly Tunable Bioactive Fiber-Reinforced Hydrogel for Guided Bone Regeneration [Abstract]
Year 2020
Journal/Proceedings Acta Biomaterialia
Reftype
DOI/URL URL DOI
Abstract
One of the most damaging pathologies that affects the health of both soft and hard tissues around the tooth is periodontitis. Clinically, periodontal tissue destruction has been managed by an integrated approach involving elimination of injured tissues followed by regenerative strategies with bone substitutes and/or barrier membranes. Regrettably, a barrier membrane with predictable mechanical integrity and multifunctional therapeutic features has yet to be established. Herein, we report a fiber-reinforced hydrogel with unprecedented tunability in terms of mechanical competence and therapeutic features by integration of highly porous poly(ε-caprolactone) fibrous mesh(es) with well-controlled 3D architecture into bioactive amorphous magnesium phosphate-laden gelatin methacryloyl hydrogels. The presence of amorphous magnesium phosphate and PCL mesh in the hydrogel can control the mechanical properties and improve the osteogenic ability, opening a tremendous opportunity in guided bone regeneration (GBR). Results demonstrate that the presence of PCL meshes fabricated via melt electrowriting can delay hydrogel degradation preventing soft tissue invasion and providing the mechanical barrier to allow time for slower migrating progenitor cells to participate in bone regeneration due to their ability to differentiate into bone-forming cells. Altogether, our approach offers a platform technology for the development of the next-generation of GBR membranes with tunable mechanical and therapeutic properties to amplify bone regeneration in compromised sites.
AUTHOR Peiffer, Quentin C. and de Ruijter, Mylène and van Duijn, Joost and Crottet, Denis and Dominic, Ernst and Malda, Jos and Castilho, Miguel
Title Melt electrowriting onto anatomically relevant biodegradable substrates: Resurfacing a diarthrodial joint [Abstract]
Year 2020
Journal/Proceedings Materials & Design
Reftype
DOI/URL URL DOI
Abstract
Three-dimensional printed hydrogel constructs with well-organized melt electrowritten (MEW) fibre-reinforcing scaffolds have been demonstrated as a promising regenerative approach to treat small cartilage defects. Here, we investige how to translate the fabrication of small fibre-reinforced structures on flat surfaces to anatomically relevant structures. In particular, the accurate deposition of MEW-fibres onto curved surfaces of conductive and non-conductive regenerative biomaterials is studied. This study reveals that clinically relevant materials with low conductivities are compatible with resurfacing with organized MEW fibres. Importantly, accurate patterning on non-flat surfaces was successfully shown, provided that a constant electrical field strength and an electrical force normal to the substrate material is maintained. Furthermore, the application of resurfacing the geometry of the medial human femoral condyle is confirmed by the fabrication of a personalised osteochondral implant. The implant composed of an articular cartilage-resident chondroprogenitor cells (ACPCs)-laden hydrogel reinforced with a well-organized MEW scaffold retained its personalised shape, improved its compressive properties and supported neocartilage formation after 28 days in vitro culture. Overall, this study establishes the groundwork for translating MEW from planar and non-resorbable material substrates to anatomically relevant geometries and regenerative materials that the regenerative medicine field aims to create.
AUTHOR Afanasenkau, Dzmitry and Kalinina, Daria and Lyakhovetskii, Vsevolod and Tondera, Christoph and Gorsky, Oleg and Moosavi, Seyyed and Pavlova, Natalia and Merkulyeva, Natalia and Kalueff, Allan V. and Minev, Ivan R. and Musienko, Pavel
Title Rapid prototyping of soft bioelectronic implants for use as neuromuscular interfaces [Abstract]
Year 2020
Journal/Proceedings Nature Biomedical Engineering
Reftype Afanasenkau2020
DOI/URL DOI
Abstract
Neuromuscular interfaces are required to translate bioelectronic technologies for application in clinical medicine. Here, by leveraging the robotically controlled ink-jet deposition of low-viscosity conductive inks, extrusion of insulating silicone pastes and in situ activation of electrode surfaces via cold-air plasma, we show that soft biocompatible materials can be rapidly printed for the on-demand prototyping of customized electrode arrays well adjusted to specific anatomical environments, functions and experimental models. We also show, with the monitoring and activation of neuronal pathways in the brain, spinal cord and neuromuscular system of cats, rats and zebrafish, that the printed bioelectronic interfaces allow for long-term integration and functional stability. This technology might enable personalized bioelectronics for neuroprosthetic applications.
AUTHOR Fanous, Marina and Gold, Sarah and Muller, Silvain and Hirsch, Stefan and Ogorka, Joerg and Imanidis, Georgios
Title Simplification of fused deposition modeling 3D-printing paradigm: Feasibility of 1-step direct powder printing for immediate release dosage form production [Abstract]
Year 2020
Journal/Proceedings International Journal of Pharmaceutics
Reftype
DOI/URL URL DOI
Abstract
Direct powder three-dimensional (3D)-printing (DPP) of tablets to simplify fused deposition modelling (FDM) was explored. The FDM paradigm involving hot-melt extrusion for making 3D-printable drug-loaded filaments as intermediate products for tablet manufacturing has been gaining attention for the decentralized on-site production of personalized dosage forms. For direct 3D-printing, powder blends were loaded into a cartridge-like head and were successfully printed with honeycomb design following heating of the extrusion cartridge. This 1-step DPP with incorporation of in-built porosity providing higher surface area served as proof of concept for manufacture of rapid release dosage forms. Water soluble hydroxypropylcellulose SSL was chosen as matrix former and caffeine as model drug. The effect of PEG4000 as plasticizer/pore former and Kollidon VA64 as rapidly dissolving polymer on DPP processability and dissolution rate was investigated. Directly 3D-printed tablets with low (30%) infill density showed rapid dissolution independently of the formulation, whereas for high (80%) infill density a combination of PEG4000 and Kollidon VA64 was required to achieve rapid release. The obtained tablets demonstrated good uniformity of percent drug content but had variable weight. Caffeine was present in crystalline state and in the stable polymorph in the tablets. Hence, DPP feasibility for immediate release dosage form manufacture was demonstrated. This technique might create an opportunity to avoid hot-melt extrusion allowing 3D-printing independently of mechanical properties of a filament and potentially prolonging product shelf life by reducing thermal stress.
AUTHOR Wei, Zhengxi and Liu, Xue and Ooka, Masato and Zhang, Li and Song, Min Jae and Huang, Ruili and Kleinstreuer, Nicole C. and Simeonov, Anton and Xia, Menghang and Ferrer, Marc
Title Two-Dimensional Cellular and Three-Dimensional Bio-Printed Skin Models to Screen Topical-Use Compounds for Irritation Potential [Abstract]
Year 2020
Journal/Proceedings Frontiers in Bioengineering and Biotechnology
Reftype
DOI/URL DOI
Abstract
Assessing skin irritation potential is critical for the safety evaluation of topical drugs and other consumer products such as cosmetics. The use of advanced cellular models, as an alternative to replace animal testing in the safety evaluation for both consumer products and ingredients, is already mandated by law in the European Union (EU) and other countries. However, there has not yet been a large-scale comparison of the effects of topical-use compounds in different cellular skin models. This study assesses the irritation potential of topical-use compounds in different cellular models of the skin that are compatible with high throughput screening (HTS) platforms. A set of 451 topical-use compounds were first tested for cytotoxic effects using two-dimensional (2D) monolayer models of primary neonatal keratinocytes and immortalized human keratinocytes. Forty-six toxic compounds identified from the initial screen with the monolayer culture systems were further tested for skin irritation potential on reconstructed human epidermis (RhE) and full thickness skin (FTS) three-dimensional (3D) tissue model constructs. Skin irritation potential of the compounds was assessed by measuring tissue viability, trans-epithelial electrical resistance (TEER), and secretion of cytokines interleukin 1 alpha (IL-1α) and interleukin 18 (IL-18). Among known irritants, high concentrations of methyl violet and methylrosaniline decreased viability, lowered TEER, and increased IL-1α secretion in both RhE and FTS models, consistent with irritant properties. However, at low concentrations, these two compounds increased IL-18 secretion without affecting levels of secreted IL-1α, and did not reduce tissue viability and TEER, in either RhE or FTS models. This result suggests that at low concentrations, methyl violet and methylrosaniline have an allergic potential without causing irritation. Using both HTS-compatible 2D cellular and 3D tissue skin models, together with irritation relevant activity endpoints, we obtained data to help assess the irritation effects of topical-use compounds and identify potential dermal hazards.
AUTHOR Noor, Nadav and Shapira, Assaf and Edri, Reuven and Gal, Idan and Wertheim, Lior and Dvir, Tal
Title 3D Printing of Personalized Thick and Perfusable Cardiac Patches and Hearts [Abstract]
Year 2019
Journal/Proceedings Advanced Science
Reftype
DOI/URL DOI
Abstract
Abstract Generation of thick vascularized tissues that fully match the patient still remains an unmet challenge in cardiac tissue engineering. Here, a simple approach to 3D-print thick, vascularized, and perfusable cardiac patches that completely match the immunological, cellular, biochemical, and anatomical properties of the patient is reported. To this end, a biopsy of an omental tissue is taken from patients. While the cells are reprogrammed to become pluripotent stem cells, and differentiated to cardiomyocytes and endothelial cells, the extracellular matrix is processed into a personalized hydrogel. Following, the two cell types are separately combined with hydrogels to form bioinks for the parenchymal cardiac tissue and blood vessels. The ability to print functional vascularized patches according to the patient's anatomy is demonstrated. Blood vessel architecture is further improved by mathematical modeling of oxygen transfer. The structure and function of the patches are studied in vitro, and cardiac cell morphology is assessed after transplantation, revealing elongated cardiomyocytes with massive actinin striation. Finally, as a proof of concept, cellularized human hearts with a natural architecture are printed. These results demonstrate the potential of the approach for engineering personalized tissues and organs, or for drug screening in an appropriate anatomical structure and patient-specific biochemical microenvironment.
AUTHOR Kleger, Nicole and Cihova, Martina and Masania, Kunal and Studart, André R. and Löffler, Jörg F.
Title 3d printing of salt as a template for magnesium with structured porosity [Abstract]
Year 2019
Journal/Proceedings advanced materials
Reftype
DOI/URL DOI
Abstract
Abstract Porosity is an essential feature in a wide range of applications that combine light weight with high surface area and tunable density. Porous materials can be easily prepared with a vast variety of chemistries using the salt-leaching technique. However, this templating approach has so far been limited to the fabrication of structures with random porosity and relatively simple macroscopic shapes. Here, a technique is reported that combines the ease of salt leaching with the complex shaping possibilities given by additive manufacturing (AM). By tuning the composition of surfactant and solvent, the salt-based paste is rheologically engineered and printed via direct ink writing into grid-like structures displaying structured pores that span from the sub-millimeter to the macroscopic scale. As a proof of concept, dried and sintered NaCl templates are infiltrated with magnesium (Mg), which is typically highly challenging to process by conventional AM techniques due to its highly oxidative nature and high vapor pressure. Mg scaffolds with well-controlled, ordered porosity are obtained after salt removal. The tunable mechanical properties and the potential to be predictably bioresorbed by the human body make these Mg scaffolds attractive for biomedical implants and demonstrate the great potential of this additive technique.
AUTHOR Daly, Andrew C. and Kelly, Daniel J.
Title Biofabrication of spatially organised tissues by directing the growth of cellular spheroids within 3D printed polymeric microchambers [Abstract]
Year 2019
Journal/Proceedings Biomaterials
Reftype
DOI/URL URL DOI
Abstract
Successful tissue engineering requires the generation of human scale implants that mimic the structure, composition and mechanical properties of native tissues. Here, we report a novel biofabrication strategy that enables the engineering of structurally organised tissues by guiding the growth of cellular spheroids within arrays of 3D printed polymeric microchambers. With the goal of engineering stratified articular cartilage, inkjet bioprinting was used to deposit defined numbers of mesenchymal stromal cells (MSCs) and chondrocytes into pre-printed microchambers. These jetted cell suspensions rapidly underwent condensation within the hydrophobic microchambers, leading to the formation of organised arrays of cellular spheroids. The microchambers were also designed to provide boundary conditions to these spheroids, guiding their growth and eventual fusion, leading to the development of stratified cartilage tissue with a depth-dependant collagen fiber architecture that mimicked the structure of native articular cartilage. Furthermore, the composition and biomechanical properties of the bioprinted cartilage was also comparable to the native tissue. Using multi-tool biofabrication, we were also able to engineer anatomically accurate, human scale, osteochondral templates by printing this microchamber system on top of a hypertrophic cartilage region designed to support endochondral bone formation and then maintaining the entire construct in long-term bioreactor culture to enhance tissue development. This bioprinting strategy provides a versatile and scalable approach to engineer structurally organised cartilage tissues for joint resurfacing applications.
AUTHOR Derr, Kristy and Zou, Jinyun and Luo, Keren and Song, Min Jae and Sittampalam, G. Sitta and Zhou, Chao and Michael, Samuel and Ferrer, Marc and Derr, Paige
Title Fully 3D Bioprinted Skin Equivalent Constructs with Validated Morphology and Barrier Function [Abstract]
Year 2019
Journal/Proceedings Tissue Engineering Part C: Methods
Reftype
DOI/URL DOI
Abstract
Development of high throughput, reproducible, three-dimensional bioprinted skin equivalents that are morphologically and functionally comparable to native skin tissue is advancing research in skin diseases, and providing a physiologically relevant platform for the development of therapeutics, transplants for regenerative medicine, and testing of skin products like cosmetics. Current protocols for the production of engineered skin rafts are limited in their ability to control three dimensional geometry of the structure and contraction leading to variability of skin function between constructs. Here we describe a method for the biofabrication of skin equivalents that are fully bioprinted using an open market bioprinter, made with commercially available primary cells and natural hydrogels. The unique hydrogel formulation allows for the production of a human-like skin equivalent with minimal lateral tissue contraction in a multiwell plate format, thus making them suitable for high throughput bioprinting in a single print with fast print and relatively short incubation times. The morphology and barrier function of the fully three-dimensional bioprinted skin equivalents are validated by immunohistochemistry staining, optical coherence tomography, and permeation assays.
AUTHOR Gonzalez-Fernandez, T. and Rathan, S. and Hobbs, C. and Pitacco, P. and Freeman, F. E. and Cunniffe, G. M. and Dunne, N. J. and McCarthy, H. O. and Nicolosi, V. and O'Brien, F. J. and Kelly, D. J.
Title Pore-forming bioinks to enable Spatio-temporally defined gene delivery in bioprinted tissues [Abstract]
Year 2019
Journal/Proceedings Journal of Controlled Release
Reftype
DOI/URL URL DOI
Abstract
The regeneration of complex tissues and organs remains a major clinical challenge. With a view towards bioprinting such tissues, we developed a new class of pore-forming bioink to spatially and temporally control the presentation of therapeutic genes within bioprinted tissues. By blending sacrificial and stable hydrogels, we were able to produce bioinks whose porosity increased with time following printing. When combined with amphipathic peptide-based plasmid DNA delivery, these bioinks supported enhanced non-viral gene transfer to stem cells in vitro. By modulating the porosity of these bioinks, it was possible to direct either rapid and transient (pore-forming bioinks), or slower and more sustained (solid bioinks) transfection of host or transplanted cells in vivo. To demonstrate the utility of these bioinks for the bioprinting of spatially complex tissues, they were next used to zonally position stem cells and plasmids encoding for either osteogenic (BMP2) or chondrogenic (combination of TGF-β3, BMP2 and SOX9) genes within networks of 3D printed thermoplastic fibers to produce mechanically reinforced, gene activated constructs. In vivo, these bioprinted tissues supported the development of a vascularised, bony tissue overlaid by a layer of stable cartilage. When combined with multiple-tool biofabrication strategies, these gene activated bioinks can enable the bioprinting of a wide range of spatially complex tissues.
AUTHOR Laternser, Sandra and Keller, Hansjoerg and Leupin, Olivier and Rausch, Martin and Graf-Hausner, Ursula and Rimann, Markus
Title A Novel Microplate 3D Bioprinting Platform for the Engineering of Muscle and Tendon Tissues [Abstract]
Year 2018
Journal/Proceedings SLAS TECHNOLOGY: Translating Life Sciences Innovation
Reftype
DOI/URL DOI
Abstract
Two-dimensional (2D) cell cultures do not reflect the in vivo situation, and thus it is important to develop predictive three-dimensional (3D) in vitro models with enhanced reliability and robustness for drug screening applications. Treatments against muscle-related diseases are becoming more prominent due to the growth of the aging population worldwide. In this study, we describe a novel drug screening platform with automated production of 3D musculoskeletal-tendon-like tissues. With 3D bioprinting, alternating layers of photo-polymerized gelatin-methacryloyl-based bioink and cell suspension tissue models were produced in a dumbbell shape onto novel postholder cell culture inserts in 24-well plates. Monocultures of human primary skeletal muscle cells and rat tenocytes were printed around and between the posts. The cells showed high viability in culture and good tissue differentiation, based on marker gene and protein expressions. Different printing patterns of bioink and cells were explored and calcium signaling with Fluo4-loaded cells while electrically stimulated was shown. Finally, controlled co-printing of tenocytes and myoblasts around and between the posts, respectively, was demonstrated followed by co-culture and co-differentiation. This screening platform combining 3D bioprinting with a novel microplate represents a promising tool to address musculoskeletal diseases.
AUTHOR Khaled, Shaban A. and Alexander, Morgan R. and Irvine, Derek J. and Wildman, Ricky D. and Wallace, Martin J. and Sharpe, Sonja and Yoo, Jae and Roberts, Clive J.
Title Extrusion 3D Printing of Paracetamol Tablets from a Single Formulation with Tunable Release Profiles Through Control of Tablet Geometry [Abstract]
Year 2018
Journal/Proceedings AAPS PharmSciTech
Reftype
DOI/URL DOI
Abstract
An extrusion-based 3D printer was used to fabricate paracetamol tablets with different geometries (mesh, ring and solid) from a single paste-based formulation formed from standard pharmaceutical ingredients. The tablets demonstrate that tunable drug release profiles can be achieved from this single formulation even with high drug loading (>{thinspace}80{%} w/w). The tablets were evaluated for drug release using a USP dissolution testing type I apparatus. The tablets showed well-defined release profiles (from immediate to sustained release) controlled by their different geometries. The dissolution results showed dependency of drug release on the surface area/volume (SA/V) ratio and the SA of the different tablets. The tablets with larger SA/V ratios and SA had faster drug release. The 3D printed tablets were also evaluated for physical and mechanical properties including tablet dimension, drug content, weight variation and breaking force and were within acceptable range as defined by the international standards stated in the US Pharmacopoeia. X-ray powder diffraction, differential scanning calorimetry and attenuated total reflectance Fourier transform infrared spectroscopy were used to identify the physical form of the active and to assess possible drug-excipient interactions. These data again showed that the tablets meet USP requirement. These results clearly demonstrate the potential of 3D printing to create unique pharmaceutical manufacturing, and potentially clinical, opportunities. The ability to use a single unmodified formulation to achieve defined release profiles could allow, for example, relatively straightforward personalization of medicines for individuals with different metabolism rates for certain drugs and hence could offer significant development and clinical opportunities.
AUTHOR de Ruijter, Mylène and Ribeiro, Alexandre and Dokter, Inge and Castilho, Miguel and Malda, Jos
Title Simultaneous Micropatterning of Fibrous Meshes and Bioinks for the Fabrication of Living Tissue Constructs [Abstract]
Year 2018
Journal/Proceedings Advanced Healthcare Materials
Reftype
DOI/URL DOI
Abstract
Abstract Fabrication of biomimetic tissues holds much promise for the regeneration of cells or organs that are lost or damaged due to injury or disease. To enable the generation of complex, multicellular tissues on demand, the ability to design and incorporate different materials and cell types needs to be improved. Two techniques are combined: extrusion-based bioprinting, which enables printing of cell-encapsulated hydrogels; and melt electrowriting (MEW), which enables fabrication of aligned (sub)-micrometer fibers into a single-step biofabrication process. Composite structures generated by infusion of MEW fiber structures with hydrogels have resulted in mechanically and biologically competent constructs; however, their preparation involves a two-step fabrication procedure that limits freedom of design of microfiber architectures and the use of multiple materials and cell types. How convergence of MEW and extrusion-based bioprinting allows fabrication of mechanically stable constructs with the spatial distributions of different cell types without compromising cell viability and chondrogenic differentiation of mesenchymal stromal cells is demonstrated for the first time. Moreover, this converged printing approach improves freedom of design of the MEW fibers, enabling 3D fiber deposition. This is an important step toward biofabrication of voluminous and complex hierarchical structures that can better resemble the characteristics of functional biological tissues.
AUTHOR Cunniffe, Gráinne and Gonzalez-Fernandez, Tomas and Daly, Andrew and Nelson Sathy, Binulal and Jeon, Oju and Alsberg, Eben and J. Kelly, Daniel
Title Three-Dimensional Bioprinting of Polycaprolactone Reinforced Gene Activated Bioinks for Bone Tissue Engineering [Abstract]
Year 2017
Journal/Proceedings Tissue Engineering Part A
Reftype
DOI/URL DOI
Abstract
Regeneration of complex bone defects remains a significant clinical challenge. Multi-tool biofabrication has permitted the combination of various biomaterials to create multifaceted composites with tailorable mechanical properties and spatially controlled biological function. In this study we sought to use bioprinting to engineer nonviral gene activated constructs reinforced by polymeric micro-filaments. A gene activated bioink was developed using RGD-g-irradiated alginate and nano-hydroxyapatite (nHA) complexed to plasmid DNA (pDNA). This ink was combined with bonemarrow-derived mesenchymal stemcells (MSCs) and then co-printed with a polycaprolactone supporting mesh to provide mechanical stability to the construct. Reporter genes were first used to demonstrate successful cell transfection using this system, with sustained expression of the transgene detected over 14 days postbioprinting. Delivery of a combination of therapeutic genes encoding for bone morphogenic protein and transforming growth factor promoted robust osteogenesis of encapsulated MSCs in vitro, with enhanced levels of matrix deposition and mineralization observed following the incorporation of therapeutic pDNA. Gene activated MSC-laden constructs were then implanted subcutaneously, directly postfabrication, and were found to support superior levels of vascularization andmineralization compared to cell-free controls. These results validate the use of a gene activated bioink to impart biological functionality to three-dimensional bioprinted constructs.
AUTHOR Khaled, Shaban A. and Burley, Jonathan C. and Alexander, Morgan R. and Yang, Jing and Roberts, Clive J.
Title 3D printing of five-in-one dose combination polypill with defined immediate and sustained release profiles [Abstract]
Year 2015
Journal/Proceedings Journal of Controlled Release
Reftype
DOI/URL URL DOI
Abstract
Abstract We have used three dimensional (3D) extrusion printing to manufacture a multi-active solid dosage form or so called polypill. This contains five compartmentalised drugs with two independently controlled and well-defined release profiles. This polypill demonstrates that complex medication regimes can be combined in a single personalised tablet. This could potentially improve adherence for those patients currently taking many separate tablets and also allow ready tailoring of a particular drug combination/drug release for the needs of an individual. The polypill here represents a cardiovascular treatment regime with the incorporation of an immediate release compartment with aspirin and hydrochlorothiazide and three sustained release compartments containing pravastatin, atenolol, and ramipril. X-ray powder diffraction (XRPD) and Attenuated Total Reflectance Fourier Transform Infrared Spectroscopy (ATR-FTIR) were used to assess drug-excipient interaction. The printed polypills were evaluated for drug release using {USP} dissolution testing. We found that the polypill showed the intended immediate and sustained release profiles based upon the active/excipient ratio used.
AUTHOR Yao, Y. and Raymond, J. E. and Kauffmann, F. and Maekawa, S. and Sugai, J. V. and Lahann, J. and Giannobile, W. V.
Title Multicompartmental Scaffolds for Coordinated Periodontal Tissue Engineering [Abstract]
Year 2023
Journal/Proceedings Journal of Dental Research
Reftype
DOI/URL DOI
Abstract
Successful periodontal repair and regeneration requires the coordinated responses from soft and hard tissues as well as the soft tissue–to–bone interfaces. Inspired by the hierarchical structure of native periodontal tissues, tissue engineering technology provides unique opportunities to coordinate multiple cell types into scaffolds that mimic the natural periodontal structure in vitro. In this study, we designed and fabricated highly ordered multicompartmental scaffolds by melt electrowriting, an advanced 3-dimensional (3D) printing technique. This strategy attempted to mimic the characteristic periodontal microenvironment through multicompartmental constructs comprising 3 tissue-specific regions: 1) a bone compartment with dense mesh structure, 2) a ligament compartment mimicking the highly aligned periodontal ligaments (PDLs), and 3) a transition region that bridges the bone and ligament, a critical feature that differentiates this system from mono- or bicompartmental alternatives. The multicompartmental constructs successfully achieved coordinated proliferation and differentiation of multiple cell types in vitro within short time, including both ligamentous- and bone-derived cells. Long-term 3D coculture of primary human osteoblasts and PDL fibroblasts led to a mineral gradient from calcified to uncalcified regions with PDL-like insertions within the transition region, an effect that is challenging to achieve with mono- or bicompartmental platforms. This process effectively recapitulates the key feature of interfacial tissues in periodontium. Collectively, this tissue-engineered approach offers a fundament for engineering periodontal tissue constructs with characteristic 3D microenvironments similar to native tissues. This multicompartmental 3D printing approach is also highly compatible with the design of next-generation scaffolds, with both highly adjustable compartmentalization properties and patient-specific shapes, for multitissue engineering in complex periodontal defects.
AUTHOR Silberman, Eric and Oved, Hadas and Namestnikov, Michael and Shapira, Assaf and Dvir, Tal
Title Post-Maturation Reinforcement of 3d-Printed Vascularized Cardiac Tissues [Abstract]
Year 2023
Journal/Proceedings Advanced Materials
Reftype
DOI/URL DOI
Abstract
Abstract Despite advances in biomaterials engineering, a large gap remains between the weak mechanical properties that can be achieved with natural materials and the strength of synthetic materials. Here, we present a method for reinforcing an engineered cardiac tissue fabricated from differentiated iPSCs and an ECM-based hydrogel in a manner that is fully biocompatible. The reinforcement occurs as a post-fabrication step, which allows for the use of 3D printing technology to generate thick, fully cellularized, and vascularized cardiac tissues. After tissue assembly and during the maturation process in a soft hydrogel, a small, tissue-penetrating reinforcer is deployed, leading to a significant increase in the tissue's mechanical properties. The tissue's robustness is demonstrated by injecting the tissue in a simulated minimally invasive procedure and showing that the tissue is functional and undamaged at the nano-, micro-, and macro-scales. This article is protected by copyright. All rights reserved
AUTHOR Ainsworth, Madison J. and Lotz, Oliver and Gilmour, Aaron and Zhang, Anyu and Chen, Michael J. and McKenzie, David R. and Bilek, Marcela M. M. and Malda, Jos and Akhavan, Behnam and Castilho, Miguel
Title Covalent Protein Immobilization on 3D-Printed Microfiber Meshes for Guided Cartilage Regeneration [Abstract]
Year 2022
Journal/Proceedings Advanced Functional Materials
Reftype
DOI/URL DOI
Abstract
Abstract Current biomaterial-based strategies explored to treat articular cartilage defects have failed to provide adequate physico-chemical cues in order to guide functional tissue regeneration. Here, it is hypothesized that atmospheric-pressure plasma (APPJ) treatment and melt electrowriting (MEW) will produce microfiber support structures with covalently-immobilized transforming growth factor beta-1 (TGFβ1) that can stimulate the generation of functional cartilage tissue. The effect of APPJ operational speeds to activate MEW polycaprolactone meshes for immobilization of TGFβ1 is first investigated and chondrogenic differentiation and neo-cartilage production are assessed in vitro. All APPJ speeds test enhanced hydrophilicity of the meshes, with the slow treatment speed having significantly less CC/CH and more COOH than the untreated meshes. APPJ treatment increases TGFβ1 loading efficiency. Additionally, in vitro experiments highlight that APPJ-based TGFβ1 attachment to the scaffolds is more advantageous than direct supplementation within the medium. After 28 days of culture, the group with immobilized TGFβ1 has significantly increased compressive modulus (more than threefold) and higher glycosaminoglycan production (more than fivefold) than when TGFβ1 is supplied through the medium. These results demonstrate that APPJ activation allows reagent-free, covalent immobilization of TGFβ1 on microfiber meshes and, importantly, that the biofunctionalized meshes can stimulate neo-cartilage matrix formation. This opens new perspectives for guided tissue regeneration.
AUTHOR Park, Hae Sang and Lee, Ji Seung and Kim, Chang-Beom and Lee, Kwang-Ho and Hong, In-Sun and Jung, Harry and Lee, Hanna and Lee, Young Jin and Ajiteru, Olatunji and Sultan, Md Tipu and Lee, Ok Joo and Kim, Soon Hee and Park, Chan Hum
Title Fluidic integrated 3D bioprinting system to sustain cell viability towards larynx fabrication [Abstract]
Year 2022
Journal/Proceedings Bioengineering & Translational Medicine
Reftype
DOI/URL DOI
Abstract
Abstract Herein, we report the first study to create a three-dimensional (3D) bioprinted artificial larynx for whole-laryngeal replacement. Our 3D bio-printed larynx was generated using extrusion-based 3D bioprinter with rabbit's chondrocyte-laden gelatin methacryloyl (GelMA)/glycidyl-methacrylated hyaluronic acid (GMHA) hybrid bioink. We used a polycaprolactone (PCL) outer framework incorporated with pores to achieve the structural strength of printed constructs, as well as to provide a suitable microenvironment to support printed cells. Notably, we established a novel fluidics supply (FS) system that simultaneously supplies basal medium together with a 3D bioprinting process, thereby improving cell survival during the printing process. Our results showed that the FS system enhanced post-printing cell viability, which enabled the generation of a large-scale cell-laden artificial laryngeal framework. Additionally, the incorporation of the PCL outer framework with pores and inner hydrogel provides structural stability and sufficient nutrient/oxygen transport. An animal study confirmed that the transplanted 3D bio-larynx successfully maintained the airway. With further development, our new strategy holds great potential for fabricating human-scale larynxes with in vivo-like biological functions for laryngectomy patients.
AUTHOR Roopesh, Ramesh Pai and Muthusamy, Senthilkumar and Velayudhan, Shiny and Sabareeswaran, Arumugham and Anil Kumar, Pallickaveedu RajanAsari
Title High-throughput production of liver parenchymal microtissues and enrichment of organ-specific functions in gelatin methacrylamide microenvironment [Abstract]
Year 2022
Journal/Proceedings Biotechnology and Bioengineering
Reftype
DOI/URL DOI
Abstract
Abstract Liver parenchymal microtissues (LPMTs) are three-dimensional (3D) aggregates of hepatocytes that recapitulate in vivo-like cellular assembly. They are considered as a valuable model to study drug metabolism, disease biology, and serve as ideal building blocks for liver tissue engineering. However, their integration into the mainstream drug screening process has been hindered due to the lack of simple, rapid techniques to produce a large number of uniform microtissues and preserve their structural–functional integrity over the long term. Here, we present a high-throughput methodology to produce LPMTs in a novel, economic, and reusable Hanging-drop Culture Chamber (HdCC). A drop-on-demand bioprinting approach was optimized to generate droplets of HepG2 cell suspension on a polyethylene terephthalate substrate. The substrates carrying droplets were placed inside a novel HdCC and incubated to obtain 1600 LPMTs having a size of 200–300 μm. Tissue size, cell viability, cellular arrangement and polarity, and insulin-mediated glucose uptake by LPMTs were analyzed. The microtissues were viable and exhibited an active response to insulin stimulation. Cells within the microtissue reorganized to form hepatic plate-like structures and expressed apical (Multidrug Resistance Protein 2 [MRP2]) and epithelial (Zonula Occludens 1 [ZO1]) markers. Further to maintain the structural integrity and enhance the functional capabilities, LPMTs were sandwiched within gelatin methacrylamide (GelMA) hydrogel and the liver-specific functions were monitored for 2 weeks. The results showed that the 3D structure of LPMTs in GelMA sandwich was maintained while the albumin secretion, urea synthesis, and cytochrome P450 activity were enhanced compared with LPMTs in suspension. In conclusion, this study presents a novel culture chamber for mass production of microtissues and a method for enhancing organ-specific functions of LPMTs in vitro.
AUTHOR Dusserre, Nathalie and Stachowicz, Marie-Laure and Medina, Chantal and Henri, Baptiste and Fricain, Jean-Christophe and Paris, François and Oliveira, Hugo
Title Microvalve bioprinting as a biofabrication tool to decipher tumor and endothelial cell crosstalk: Application to a simplified glioblastoma model [Abstract]
Year 2021
Journal/Proceedings Bioprinting
Reftype
DOI/URL URL DOI
Abstract
Bioprinting technologies are powerful new bioengineering tools that can spatially reproduce multiple microenvironmental cues in a highly controlled, tunable, and precise manner. In this study, microvalve bioprinting technology was successfully used to print in close proximity endothelial and tumor cells at higher concentrations than previously thought possible, while preserving their viability. We propose that the resulting multicellular models, bioprinted in a controlled extracellular matrix microenvironment, are well-suited to study endothelial and cancer cell crosstalk within a cancer niche. As proof of concept, microvalve bioprinting was applied to the bioengineering of a simplified glioblastoma model in which biological processes involved in tumor expansion, such as tumor cell invasion patterns, cell proliferation, and senescence could be easily visualized and quantified. In this model, U251 glioblastoma cells and primary human umbilical vein endothelial cells (HUVECs) exhibited good printability and high viability after printing. U251 cells formed physiologically relevant clusters and invasion margins, while HUVECs generated vascular-like networks when primary fibroblasts were added to the model. An oxidative stress mimicking the one encountered within a tumor microenvironment during radiotherapy or genotoxic chemotherapy was shown to both diminish endothelial cells proliferation and to increase their senescence. Results also suggested that stressed glioblastoma cells may alter normal endothelial cell proliferation but not impact their senescence. This data demonstrates the potential of microvalve bioprinting to fabricate in vitro models that can help decipher endothelial and tumor cell crosstalk, within controlled and modulable microenvironments, and can then be used to address critical questions in the context of cancer recurrence.
AUTHOR Freeman, Fiona E. and Pitacco, Pierluca and van Dommelen, Lieke H. A. and Nulty, Jessica and Browe, David C. and Shin, Jung-Youn and Alsberg, Eben and Kelly, Daniel J.
Title 3D bioprinting spatiotemporally defined patterns of growth factors to tightly control tissue regeneration [Abstract]
Year 2020
Journal/Proceedings Science Advances
Reftype
DOI/URL URL DOI
Abstract
Therapeutic growth factor delivery typically requires supraphysiological dosages, which can cause undesirable off-target effects. The aim of this study was to 3D bioprint implants containing spatiotemporally defined patterns of growth factors optimized for coupled angiogenesis and osteogenesis. Using nanoparticle functionalized bioinks, it was possible to print implants with distinct growth factor patterns and release profiles spanning from days to weeks. The extent of angiogenesis in vivo depended on the spatial presentation of vascular endothelial growth factor (VEGF). Higher levels of vessel invasion were observed in implants containing a spatial gradient of VEGF compared to those homogenously loaded with the same total amount of protein. Printed implants containing a gradient of VEGF, coupled with spatially defined BMP-2 localization and release kinetics, accelerated large bone defect healing with little heterotopic bone formation. This demonstrates the potential of growth factor printing, a putative point of care therapy, for tightly controlled tissue regeneration.
AUTHOR Lee, Ji Seung and Park, Hae Sang and Jung, Harry and Lee, Hanna and Hong, Heesun and Lee, Young Jin and Suh, Ye Ji and Lee, Ok Joo and Kim, Soon Hee and Park, Chan Hum
Title 3D-printable photocurable bioink for cartilage regeneration of tonsil-derived mesenchymal stem cells [Abstract]
Year 2020
Journal/Proceedings Additive Manufacturing
Reftype
DOI/URL URL DOI
Abstract
Cartilage regeneration is challenging because of the poor intrinsic self-repair capacity of avascular tissue. Three-dimensional (3D) bioprinting has gained significant attention in the field of tissue engineering and is a promising technology to overcome current difficulties in cartilage regeneration. Although bioink is an essential component of bioprinting technology, several challenges remain in satisfying different requirements for ideal bioink, including biocompatibility and printability based on specific biological requirements. Gelatin and hyaluronic acid (HA) have been shown to be ideal biomimetic hydrogel sources for cartilage regeneration. However, controlling their structure, mechanical properties, biocompatibility, and degradation rate for cartilage repair remains a challenge. Here, we show a photocurable bioink created by hybridization of gelatin methacryloyl (GelMA) and glycidyl-methacrylated HA (GMHA) for material extrusion 3D bioprinting in cartilage regeneration. GelMA and GMHA were mixed in various ratios, and the mixture of 7% GelMA and 5% GMHA bioink (G7H5) demonstrated the most reliable mechanical properties, rheological properties, and printability. This G7H5 bioink allowed us to build a highly complex larynx structure, including the hyoid bone, thyroid cartilage, cricoid cartilage, arytenoid cartilage, and cervical trachea. This bioink also provided an excellent microenvironment for chondrogenesis of tonsil-derived mesenchymal stem cells (TMSCs) in vitro and in vivo. In summary, this study presents the ideal formulation of GelMA/GMHA hybrid bioink to generate a well-suited photocurable bioink for cartilage regeneration of TMSCs using a material extrusion bioprinter, and could be applied to cartilage tissue engineering.
AUTHOR Liu, Xue and Michael, Samuel and Bharti, Kapil and Ferrer, Marc and Song, Min Jae
Title A biofabricated vascularized skin model of atopic dermatitis for preclinical studies [Abstract]
Year 2020
Journal/Proceedings Biofabrication
Reftype
DOI/URL DOI
Abstract
Three-dimensional (3D) biofabrication techniques enable the production of multicellular tissue models as assay platforms for drug screening. The increased cellular and physiological complexity in these 3D tissue models should recapitulate the relevant biological environment found in the body. Here we describe the use of 3D bioprinting techniques to fabricate skin equivalent tissues of varying physiological complexity, including human epidermis, non-vascularized and vascularized full-thickness skin tissue equivalents, in a multi-well platform to enable drug screening. Human keratinocytes, fibroblasts, and pericytes, and induced pluripotent stem cell (iPSC)-derived endothelial cells were used in the biofabrication process to produce the varying complexity. The skin equivalents exhibit the correct structural markers of dermis and epidermis stratification, with physiological functions of the skin barrier. The robustness, versatility and reproducibility of the biofabrication techniques are further highlighted by the generation of atopic dermatitis (AD)-disease like tissues. These AD models demonstrate several clinical hallmarks of the disease, including: (i) spongiosis and hyperplasia; (ii) early and terminal expression of differentiation proteins; and (iii) increases in levels of pro-inflammatory cytokines. We show the pre-clinical relevance of the biofabricated AD tissue models to correct disease phenotype by testing the effects of dexamethasone, an anti-inflammatory corticosteroid, and three Janus Kinase inhibitors from clinical trials for AD. This study demonstrates the development of a versatile and reproducible bioprinting approach to create human skin equivalents with a range of cellular complexity for disease modelling. In addition, we establish several assay readouts that are quantifiable, robust, AD relevant, and can be scaled up for compound screening. The results show that the cellular complexity of the tissues develops a more physiologically relevant AD disease model. Thus, the skin models in this study offer an in vitro approach for the rapid understanding of pathological mechanisms, and testing for efficacy of action and toxic effects of drugs.
AUTHOR Colle, Julien and Blondeel, Phillip and De Bruyne, Axelle and Bochar, Silke and Tytgat, Liesbeth and Vercruysse, Chris and Van Vlierberghe, Sandra and Dubruel, Peter and Declercq, Heidi
Title Bioprinting predifferentiated adipose-derived mesenchymal stem cell spheroids with methacrylated gelatin ink for adipose tissue engineering [Abstract]
Year 2020
Journal/Proceedings Journal of Materials Science: Materials in Medicine
Reftype Colle2020
DOI/URL DOI
Abstract
The increasing number of mastectomies results in a greater demand for breast reconstruction characterized by simplicity and a low complication profile. Reconstructive surgeons are investigating tissue engineering (TE) strategies to overcome the current surgical drawbacks. 3D bioprinting is the rising technique for the fabrication of large tissue constructs which provides a potential solution for unmet clinical needs in breast reconstruction building on decades of experience in autologous fat grafting, adipose-derived mesenchymal stem cell (ASC) biology and TE. A scaffold was bioprinted using encapsulated ASC spheroids in methacrylated gelatin ink (GelMA). Uniform ASC spheroids with an ideal geometry and diameter for bioprinting were formed, using a high-throughput non-adhesive agarose microwell system. ASC spheroids in adipogenic differentiation medium (ADM) were evaluated through live/dead staining, histology (HE, Oil Red O), TEM and RT-qPCR. Viable spheroids were obtained for up to 14 days post-printing and showed multilocular microvacuoles and successful differentiation toward mature adipocytes shown by gene expression analysis. Moreover, spheroids were able to assemble at random in GelMA, creating a macrotissue. Combining the advantage of microtissues to self-assemble and the controlled organization by bioprinting technologies, these ASC spheroids can be useful as building blocks for the engineering of soft tissue implants.
AUTHOR Zhang, Danwei and Jonhson, Win and Herng, Tun Seng and Ang, Yong Quan and Yang, Lin and Tan, Swee Ching and Peng, Erwin and He, Hui and Ding, Jun
Title A 3D-printing method of fabrication for metals{,} ceramics{,} and multi-materials using a universal self-curable technique for robocasting [Abstract]
Year 2019
Journal/Proceedings Materials Horizons
Reftype
DOI/URL DOI
Abstract
Ceramics and metals are important materials that modern technologies are constructed from. The capability to produce such materials in a complex geometry with good mechanical properties can revolutionize the way we engineer our devices. Current curing techniques pose challenges such as high energy requirements{,} limitations of materials with high refractive index{,} tedious post-processing heat treatment processes{,} uneven drying shrinkages{,} and brittleness of green bodies. In this paper{,} a novel modified self-curable epoxide–amine 3D printing system is proposed to print a wide range of ceramics (metal oxides{,} nitrides{,} and carbides) and metals without the need for an external curing source. Through this technique{,} complex multi-material structures (with metal–ceramic and ceramic–ceramic combinations) can also be realized. Tailoring and matching the sintering temperatures of different materials through sintering additives and dopants{,} combined with a structural design providing maximum adhesion between interfaces{,} allow us to successfully obtain superior quality sintered multi-material structures. High-quality ceramic and metallic materials have been achieved (e.g.{,} zirconia with >98% theoretical density). Also{,} highly conductive metals and magnetic ceramics were printed and shaped uniquely without the need for a sacrificial support. With the addition of low molecular weight plasticizers and a multi-stage heat treatment process{,} crack-free and dense high-quality integrated multi-material structures fabricated by 3D printing can thus be a reality in the near future.
AUTHOR Khaled, Shaban A. and Alexander, Morgan R. and Wildman, Ricky D. and Wallace, Martin J. and Sharpe, Sonja and Yoo, Jae and Roberts, Clive J.
Title 3D extrusion printing of high drug loading immediate release paracetamol tablets [Abstract]
Year 2018
Journal/Proceedings International Journal of Pharmaceutics
Reftype
DOI/URL URL DOI
Abstract
The manufacture of immediate release high drug loading paracetamol oral tablets was achieved using an extrusion based 3D printer from a premixed water based paste formulation. The 3D printed tablets demonstrate that a very high drug (paracetamol) loading formulation (80% w/w) can be printed as an acceptable tablet using a method suitable for personalisation and distributed manufacture. Paracetamol is an example of a drug whose physical form can present challenges to traditional powder compression tableting. Printing avoids these issues and facilitates the relatively high drug loading. The 3D printed tablets were evaluated for physical and mechanical properties including weight variation, friability, breaking force, disintegration time, and dimensions and were within acceptable range as defined by the international standards stated in the United States Pharmacopoeia (USP). X-ray Powder Diffraction (XRPD) was used to identify the physical form of the active. Additionally, XRPD, Attenuated Total Reflectance Fourier Transform Infrared spectroscopy (ATR-FTIR) and differential scanning calorimetry (DSC) were used to assess possible drug-excipient interactions. The 3D printed tablets were evaluated for drug release using a USP dissolution testing type I apparatus. The tablets showed a profile characteristic of the immediate release profile as intended based upon the active/excipient ratio used with disintegration in less than 60 s and release of most of the drug within 5 min. The results demonstrate the capability of 3D extrusion based printing to produce acceptable high-drug loading tablets from approved materials that comply with current USP standards.
AUTHOR Daly, Andrew C. and Pitacco, Pierluca and Nulty, Jessica and Cunniffe, Gráinne M. and Kelly, Daniel J.
Title 3D printed microchannel networks to direct vascularisation during endochondral bone repair [Abstract]
Year 2018
Journal/Proceedings Biomaterials
Reftype
DOI/URL URL DOI
Abstract
Bone tissue engineering strategies that recapitulate the developmental process of endochondral ossification offer a promising route to bone repair. Clinical translation of such endochondral tissue engineering strategies will require overcoming a number of challenges, including the engineering of large and often anatomically complex cartilage grafts, as well as the persistence of core regions of avascular cartilage following their implantation into large bone defects. Here 3D printing technology is utilized to develop a versatile and scalable approach to guide vascularisation during endochondral bone repair. First, a sacrificial pluronic ink was used to 3D print interconnected microchannel networks in a mesenchymal stem cell (MSC) laden gelatin-methacryloyl (GelMA) hydrogel. These constructs (with and without microchannels) were next chondrogenically primed in vitro and then implanted into critically sized femoral bone defects in rats. The solid and microchanneled cartilage templates enhanced bone repair compared to untreated controls, with the solid cartilage templates (without microchannels) supporting the highest levels of total bone formation. However, the inclusion of 3D printed microchannels was found to promote osteoclast/immune cell invasion, hydrogel degradation, and vascularisation following implantation. In addition, the endochondral bone tissue engineering strategy was found to support comparable levels of bone healing to BMP-2 delivery, whilst promoting lower levels of heterotopic bone formation, with the microchanneled templates supporting the lowest levels of heterotopic bone formation. Taken together, these results demonstrate that 3D printed hypertrophic cartilage grafts represent a promising approach for the repair of complex bone fractures, particularly for larger defects where vascularisation will be a key challenge.
AUTHOR Ng, Wei Long and Qi, Jovina Tan Zhi and Yeong, Wai Yee and Naing, May Win
Title Proof-of-concept: 3D bioprinting of pigmented human skin constructs [Abstract]
Year 2018
Journal/Proceedings Biofabrication
Reftype
DOI/URL DOI
Abstract
Three-dimensional (3D) pigmented human skin constructs have been fabricated using a 3D bioprinting approach. The 3D pigmented human skin constructs are obtained from using three different types of skin cells (keratinocytes, melanocytes and fibroblasts from three different skin donors) and they exhibit similar constitutive pigmentation (pale pigmentation) as the skin donors. A two-step drop-on-demand bioprinting strategy facilitates the deposition of cell droplets to emulate the epidermal melanin units (pre-defined patterning of keratinocytes and melanocytes at the desired positions) and manipulation of the microenvironment to fabricate 3D biomimetic hierarchical porous structures found in native skin tissue. The 3D bioprinted pigmented skin constructs are compared to the pigmented skin constructs fabricated by conventional a manual-casting approach; in-depth characterization of both the 3D pigmented skin constructs has indicated that the 3D bioprinted skin constructs have a higher degree of resemblance to native skin tissue in term of the presence of well-developed stratified epidermal layers and the presence of a continuous layer of basement membrane proteins as compared to the manually-cast samples. The 3D bioprinting approach facilitates the development of 3D in vitro pigmented human skin constructs for potential toxicology testing and fundamental cell biology research.
AUTHOR Khaled, Shaban A. and Burley, Jonathan C. and Alexander, Morgan R. and Yang, Jing and Roberts, Clive J.
Title 3D printing of tablets containing multiple drugs with defined release profiles [Abstract]
Year 2015
Journal/Proceedings International Journal of Pharmaceutics
Reftype
DOI/URL URL DOI
Abstract
Abstract We have employed three-dimensional (3D) extrusion-based printing as a medicine manufacturing technique for the production of multi-active tablets with well-defined and separate controlled release profiles for three different drugs. This ‘polypill’ made by a 3D additive manufacture technique demonstrates that complex medication regimes can be combined in a single tablet and that it is viable to formulate and ‘dial up’ this single tablet for the particular needs of an individual. The tablets used to illustrate this concept incorporate an osmotic pump with the drug captopril and sustained release compartments with the drugs nifedipine and glipizide. This combination of medicines could potentially be used to treat diabetics suffering from hypertension. The room temperature extrusion process used to print the formulations used excipients commonly employed in the pharmaceutical industry. Attenuated Total Reflectance Fourier Transform Infrared Spectroscopy (ATR-FTIR) and X-ray powder diffraction (XRPD) were used to assess drug–excipient interaction. The printed formulations were evaluated for drug release using {USP} dissolution testing. We found that the captopril portion showed the intended zero order drug release of an osmotic pump and noted that the nifedipine and glipizide portions showed either first order release or Korsmeyer–Peppas release kinetics dependent upon the active/excipient ratio used.
AUTHOR Aliyazdi, Samy and Frisch, Sarah and Hidalgo, Alberto and Frank, Nicolas and Krug, Daniel and Müller, Rolf and Schaefer, Ulrich F. and Vogt, Thomas and Loretz, Brigitta and Lehr, Claus-Michael
Title 3D bioprinting of E. coli MG1655 biofilms on human lung epithelial cells for building complex in vitro infection models [Abstract]
Year 2023
Journal/Proceedings Biofabrication
Reftype
DOI/URL DOI
Abstract
Biofilm-associated infections are causing over half a million deaths each year, raising the requirement for innovative therapeutic approaches. For developing novel therapeutics against bacterial biofilm infections, complex in vitro models that allow to study drug effects on both pathogens and host cells as well as their interaction under controlled, physiologically relevant conditions appear as highly desirable. Nonetheless, building such models is quite challenging because (1) rapid bacterial growth and release of virulence factors may lead to premature host cell death and (2) maintaining the biofilm status under suitable co-culture requires a highly controlled environment. To approach that problem, we chose 3D bioprinting. However, printing living bacterial biofilms in defined shapes on human cell models, requires bioinks with very specific properties. Hence, this work aims to develop a 3D bioprinting biofilm method to build robust in vitro infection models. Based on rheology, printability and bacterial growth, a bioink containing 3% gelatin and 1% alginate in Luria-Bertani-medium was found optimal for Escherichia coli MG1655 biofilms. Biofilm properties were maintained after printing, as shown visually via microscopy techniques as well as in antibiotic susceptibility assays. Metabolic profile analysis of bioprinted biofilms showed high similarity to native biofilms. After printing on human bronchial epithelial cells (Calu-3), the shape of printed biofilms was maintained even after dissolution of non-crosslinked bioink, while no cytotoxicity was observed over 24 h. Therefore, the approach presented here may provide a platform for building complex in vitro infection models comprising bacterial biofilms and human host cells.
AUTHOR Constante, Gissela and Apsite, Indra and Schönfeld, Dennis and Pretsch, Thorsten and Ionov, Leonid
Title Reversibly Photoswitchable High-Aspect Ratio Surfaces [Abstract]
Year 2023
Journal/Proceedings Small Structures
Reftype
DOI/URL DOI
Abstract
Herein, the fabrication of light-sensitive high-aspect ratio surfaces with switchable topography using melt-electrowriting of shape-memory polymers and deposition of light-to-heat converting black ink on it by dip coating is reported on. The lamellae exposed to low temperatures are hard and cannot be deformed by water droplets. The temperature reached upon illumination of surfaces is close to the melting point of the soft segment of the polyurethane that leads to softening of the polymer. Due to this, it is possible to locally deform and recover the light-softened surface structures by water droplets deposited on lamellae. The deformed state can be fixed by cooling down resulting in the crystallization of the polymer. Thus, the reversibility of local deformation can be achieved. Finally, the application of the developed approach and materials for the fabrication of smart light-controlled valves is demonstrated, which can be used for the controlled mixing of fluids in microfluidic devices.
AUTHOR Pless, Christian J. and Nikzad, Shayla and Papiano, Irene and Gnanadass, Samson and Kadumudi, Firoz B. and Dolatshahi-Pirouz, Alireza and Thomsen, Carsten Eckhart and Lind, Johan U.
Title Soft Electronic Block Copolymer Elastomer Composites for Multi-Material Printing of Stretchable Physiological Sensors on Textiles [Abstract]
Year 2023
Journal/Proceedings Advanced Electronic Materials
Reftype
DOI/URL DOI
Abstract
Abstract Soft and stretchable electronic materials have a number of unique applications, not least within sensors for monitoring human health. Through development of appropriate inks, micro-extrusion 3D printing offers an appealing route for integrating soft electronic materials within wearable garments. Toward this objective, here a series of conductive inks based on soft thermoplastic styrene–ethylene–butylene–styrene elastomers combined with silver micro-flakes, carbon black nanoparticles, or poly(3,4-ethylenedioxythiophene) (PEDOT) conducting polymer additives, is developed. Their electrical and mechanical properties are systematically compared and found to be highly dependent on additive amount and type. Thus, while silver composites offer the highest conductivity, their stretchability is far inferior to carbon black composites, which can maintain conductivity beyond 400% strain. The PEDOT composites are the least conductive and stretchable but display unique properties due to their propensity for ionic conductivity. To integrate these inks, as well as insulating counterparts, into functional designs, a multi-material micro-extrusion 3D printing routine for direct deposition onto stretchable, elastic fabrics is established. As demonstration, prototypes are produced for sensing common health markers including strain, physiological temperatures, and electrocardiograms. Collectively, this work demonstrates multi-material 3D printing of soft styrene–ethylene–butylene–styrene elastomer composites as a versatile method for fabricating soft bio-sensors.
AUTHOR Huang, Boyang and Wang, Yaxin and Vyas, Cian and Bartolo, Paulo
Title Crystal Growth of 3D Poly(ε-caprolactone) Based Bone Scaffolds and Its Effects on the Physical Properties and Cellular Interactions [Abstract]
Year 2022
Journal/Proceedings Advanced Science
Reftype
DOI/URL URL DOI
Abstract
Abstract Extrusion additive manufacturing is widely used to fabricate polymer-based 3D bone scaffolds. However, the insight views of crystal growths, scaffold features and eventually cell-scaffold interactions are still unknown. In this work, melt and solvent extrusion additive manufacturing techniques are used to produce scaffolds considering highly analogous printing conditions. Results show that the scaffolds produced by these two techniques present distinct physiochemical properties, with melt-printed scaffolds showing stronger mechanical properties and solvent-printed scaffolds showing rougher surface, higher degradation rate, and faster stress relaxation. These differences are attributed to the two different crystal growth kinetics, temperature-induced crystallization (TIC) and strain-induced crystallization (SIC), forming large/integrated spherulite-like and a small/fragmented lamella-like crystal regions respectively. The stiffer substrate of melt-printed scaffolds contributes to higher ratio of nuclear Yes-associated protein (YAP) allocation, favoring cell proliferation and differentiation. Faster relaxation and degradation of solvent-printed scaffolds result in dynamic surface, contributing to an early-stage faster osteogenesis differentiation.
AUTHOR Kajtez, Janko and Wesseler, Milan Finn and Birtele, Marcella and Khorasgani, Farinaz Riyahi and Rylander Ottosson, Daniella and Heiskanen, Arto and Kamperman, Tom and Leijten, Jeroen and Martínez-Serrano, Alberto and Larsen, Niels B. and Angelini, Thomas E. and Parmar, Malin and Lind, Johan U. and Emnéus, Jenny
Title Embedded 3D Printing in Self-Healing Annealable Composites for Precise Patterning of Functionally Mature Human Neural Constructs [Abstract]
Year 2022
Journal/Proceedings Advanced Science
Reftype
DOI/URL DOI
Abstract
Abstract Human in vitro models of neural tissue with tunable microenvironment and defined spatial arrangement are needed to facilitate studies of brain development and disease. Towards this end, embedded printing inside granular gels holds great promise as it allows precise patterning of extremely soft tissue constructs. However, granular printing support formulations are restricted to only a handful of materials. Therefore, there has been a need for novel materials that take advantage of versatile biomimicry of bulk hydrogels while providing high-fidelity support for embedded printing akin to granular gels. To address this need, Authors present a modular platform for bioengineering of neuronal networks via direct embedded 3D printing of human stem cells inside Self-Healing Annealable Particle-Extracellular matrix (SHAPE) composites. SHAPE composites consist of soft microgels immersed in viscous extracellular-matrix solution to enable precise and programmable patterning of human stem cells and consequent generation mature subtype-specific neurons that extend projections into the volume of the annealed support. The developed approach further allows multi-ink deposition, live spatial and temporal monitoring of oxygen levels, as well as creation of vascular-like channels. Due to its modularity and versatility, SHAPE biomanufacturing toolbox has potential to be used in applications beyond functional modeling of mechanically sensitive neural constructs.
AUTHOR Kessel, Benjamin and Lee, Mihyun and Bonato, Angela and Tinguely, Yann and Tosoratti, Enrico and Zenobi-Wong, Marcy
Title 3D Bioprinting of Macroporous Materials Based on Entangled Hydrogel Microstrands [Abstract]
Year 2020
Journal/Proceedings Advanced Science
Reftype
DOI/URL DOI
Abstract
Abstract Hydrogels are excellent mimetics of mammalian extracellular matrices and have found widespread use in tissue engineering. Nanoporosity of monolithic bulk hydrogels, however, limits mass transport of key biomolecules. Microgels used in 3D bioprinting achieve both custom shape and vastly improved permissivity to an array of cell functions, however spherical-microbead-based bioinks are challenging to upscale, are inherently isotropic, and require secondary crosslinking. Here, bioinks based on high-aspect-ratio hydrogel microstrands are introduced to overcome these limitations. Pre-crosslinked, bulk hydrogels are deconstructed into microstrands by sizing through a grid with apertures of 40–100 µm. The microstrands are moldable and form a porous, entangled structure, stable in aqueous medium without further crosslinking. Entangled microstrands have rheological properties characteristic of excellent bioinks for extrusion bioprinting. Furthermore, individual microstrands align during extrusion and facilitate the alignment of myotubes. Cells can be placed either inside or outside the hydrogel phase with >90% viability. Chondrocytes co-printed with the microstrands deposit abundant extracellular matrix, resulting in a modulus increase from 2.7 to 780.2 kPa after 6 weeks of culture. This powerful approach to deconstruct bulk hydrogels into advanced bioinks is both scalable and versatile, representing an important toolbox for 3D bioprinting of architected hydrogels.
AUTHOR Zhang, Danwei and Peng, Erwin and Borayek, Ramadan and Ding, Jun
Title Controllable Ceramic Green-Body Configuration for Complex Ceramic Architectures with Fine Features [Abstract]
Year 2019
Journal/Proceedings Advanced Functional Materials
Reftype
DOI/URL DOI
Abstract
Abstract Fabrication of dense ceramic articles with intricate fine features and geometrically complex morphology by using a relatively simple and the cost-effective process still remains a challenge. Ceramics, either in its green- or sintered-form, are known for being hard yet brittle which limits further shape reconfiguration. In this work, a combinatorial process of ceramic robocasting and photopolymerization is demonstrated to produce either flexible and/or stretchable ceramic green-body (Flex-Body or Stretch-Body) that can undergo a postprinting reconfiguration process. Secondary shaping may proceed through: i) self-assembly-assisted shaping and ii) mold-assisted shaping process, which allows a well-controlled ceramic structure morphology. With a proposed well-controlled thermal heating process, the ceramic Sintered-Body can achieve >99.0% theoretical density with good mechanical rigidity. Complex and dense ceramic articles with fine features down to 65 μm can be fabricated. When combined with a multi-nozzle deposition process, i) self-shaping ceramic structures can be realized through anisotropic shrinkage induced by suspensions' composition variation and ii) technical and functional multiceramic structures can be fabricated. The simplicity of the proposed technique and its inexpensive processing cost make it an attractive approach for fabricating geometrically complex ceramic articles with unique macrostructures, which complements the existing state of-the-art ceramic additive manufacturing techniques.
AUTHOR Azim, N. and Hart, C. and Sommerhage, F. and Aubin, M. and Hickman, J. J. and Rajaraman, S.
Title Precision Plating of Human Electrogenic Cells on Microelectrodes Enhanced With Precision Electrodeposited Nano-Porous Platinum for Cell-Based Biosensing Applications [Abstract]
Year 2019
Journal/Proceedings Journal of Microelectromechanical Systems
Reftype
DOI/URL URL DOI
Abstract
Microelectrode Arrays are established platforms for biosensing applications; however, limitations in electrode impedance and cell-electrode coupling still exist. In this paper, the SNR of 25 μm diameter gold (Au) microelectrodes was improved by decreasing the impedance with precision electrodeposition. SEM determined that N-P Pt. microelectrodes had nanoporous structures that filled the insulation cylinders. EIS, CV, and RMS noise measurements concluded that the optimized electrodeposition of N-P Pt. led to a lowered impedance of 18.36 kΩ ± 2.6 kΩ at 1 kHz, a larger double layer capacitance of 73 nF, and lowered RMS noise of 2.08±0.16 μV as compared to the values for Au of 159 kΩ ± 28 kΩ at 1 kHz, 17nF, and 3.14 ± 0.42 μV, respectively. Human motoneurons and human cardiomyocytes were cultured on N-P Pt. devices to assess their biocompatibility and signal quality. In order to improve the cell-electrode coupling, a precision plating technique was used. Both cell types were electrically active on devices for up to 10 weeks, demonstrated improved SNR, and expected responses to precision chemical and electrical stimulation. The modification of Au microelectrodes with nanomaterials in combination with precision culturing of human cell types provides cost effective, highly sensitive, well coupled and relevant biosensing platforms for medical and pharmaceutical research.
AUTHOR Kokkinis, Dimitri and Bouville, Florian and Studart, André R.
Title 3D Printing of Materials with Tunable Failure via Bioinspired Mechanical Gradients [Abstract]
Year 2018
Journal/Proceedings Advanced Materials
Reftype
DOI/URL DOI
Abstract
Abstract Mechanical gradients are useful to reduce strain mismatches in heterogeneous materials and thus prevent premature failure of devices in a wide range of applications. While complex graded designs are a hallmark of biological materials, gradients in manmade materials are often limited to 1D profiles due to the lack of adequate fabrication tools. Here, a multimaterial 3D‐printing platform is developed to fabricate elastomer gradients spanning three orders of magnitude in elastic modulus and used to investigate the role of various bioinspired gradient designs on the local and global mechanical behavior of synthetic materials. The digital image correlation data and finite element modeling indicate that gradients can be effectively used to manipulate the stress state and thus circumvent the weakening effect of defect‐rich interfaces or program the failure behavior of heterogeneous materials. Implementing this concept in materials with bioinspired designs can potentially lead to defect‐tolerant structures and to materials whose tunable failure facilitates repair of biomedical implants, stretchable electronics, or soft robotics.
AUTHOR Schaffner, Manuel and Faber, Jakob A. and Pianegonda, Lucas and Rühs, Patrick A. and Coulter, Fergal and Studart, André R.
Title 3D printing of robotic soft actuators with programmable bioinspired architectures [Abstract]
Year 2018
Journal/Proceedings Nature Communications
Reftype Schaffner2018
DOI/URL DOI
Abstract
Soft actuation allows robots to interact safely with humans, other machines, and their surroundings. Full exploitation of the potential of soft actuators has, however, been hindered by the lack of simple manufacturing routes to generate multimaterial parts with intricate shapes and architectures. Here, we report a 3D printing platform for the seamless digital fabrication of pneumatic silicone actuators exhibiting programmable bioinspired architectures and motions. The actuators comprise an elastomeric body whose surface is decorated with reinforcing stripes at a well-defined lead angle. Similar to the fibrous architectures found in muscular hydrostats, the lead angle can be altered to achieve elongation, contraction, or twisting motions. Using a quantitative model based on lamination theory, we establish design principles for the digital fabrication of silicone-based soft actuators whose functional response is programmed within the material's properties and architecture. Exploring such programmability enables 3D printing of a broad range of soft morphing structures.
AUTHOR Schaffner, Manuel and R{"u}hs, Patrick A. and Coulter, Fergal and Kilcher, Samuel and Studart, Andr{'e} R.
Title 3D printing of bacteria into functional complex materials [Abstract]
Year 2017
Journal/Proceedings Science Advances
Reftype
DOI/URL URL DOI
Abstract
Despite recent advances to control the spatial composition and dynamic functionalities of bacteria embedded in materials, bacterial localization into complex three-dimensional (3D) geometries remains a major challenge. We demonstrate a 3D printing approach to create bacteria-derived functional materials by combining the natural diverse metabolism of bacteria with the shape design freedom of additive manufacturing. To achieve this, we embedded bacteria in a biocompatible and functionalized 3D printing ink and printed two types of {textquotedblleft}living materials{textquotedblright} capable of degrading pollutants and of producing medically relevant bacterial cellulose. With this versatile bacteria-printing platform, complex materials displaying spatially specific compositions, geometry, and properties not accessed by standard technologies can be assembled from bottom up for new biotechnological and biomedical applications.
AUTHOR Schroeder, Thomas B. H. and Guha, Anirvan and Lamoureux, Aaron and VanRenterghem, Gloria and Sept, David and Shtein, Max and Yang, Jerry and Mayer, Michael
Title An electric-eel-inspired soft power source from stacked hydrogels [Abstract]
Year 2017
Journal/Proceedings Nature
Reftype
DOI/URL DOI
Abstract
Progress towards the integration of technology into livingo ganisms requires electrical power sources that are biocompatible, mechanically flexible, and able to harness the chemical energy available inside biological systems. Conventional batteries were not designed with these criteria in mind. The electric organ of the knifefish Electrophorus electricus (commonly known as the electric eel) is, however, an example of an electrical power source that operates within biological constraints while featuring power characteristics that include peak potential differences of 600 volts and currents of 1 ampere1,2. Here we introduce an electric eel-inspired power concept that uses gradients of ions between miniature polyacrylamide hydrogel compartments bounded by a repeating sequence of cation- and anion-selective hydrogel membranes. The system uses a scalable stacking or folding geometry that generates 110 volts at open circuit or 27 milliwatts per square metre per gel cell upon simultaneous, self-registered mechanical contact activation of thousands of gel compartments in series while circumventing power dissipation before contact. Unlike typical batteries, these systems are soft, flexible, transparent, and potentially biocompatible. These characteristics suggest that artificial electric organs could be used to power next-generation implant materials such as pacemakers, implantable sensors, or prosthetic devices in hybrids of living and non-living systems3–6.�
AUTHOR Farazin, Ashkan and Zhang, Chunwei and Gheisizadeh, Amirhossein and Shahbazi, Aminadel
Title 3D bio-printing for use as bone replacement tissues: A review of biomedical application [Abstract]
Year 2023
Journal/Proceedings Biomedical Engineering Advances
Reftype
DOI/URL URL DOI
Abstract
Since we are able to use 3D printers, producing porous metal scaffolds become very easy. Contrary to usual methods, 3D printing of porous scaffolds is determined by a controllable and precise manufacturing process. That property allows us to form customized prefabricated implants for individual patients and make a regular pore distribution at the micro-scale as same as the structure of a bone, design of a structure like bone is very complicated because the pores of that structure must have enough space for cell attachment and proliferation. The reaction of cells and bone ingrowth can influence the effect of 3D printed porous metal scaffolds on bone ingrowth. This review introduces 3D printing techniques brief and focuses on the factors that potentially influence bone ingrowth into 3D printed porous metal scaffolds like materials, pore size, porosity, pore structure, surface modification, and mechanical properties. In each section, we described the mechanisms underlying cell-scaffold interactions in detail also there is a short introduction of clinical application of 3D printing. After all, there is a list that shows the most appropriate parameters for a flawless porous metal scaffold, and it is lead to finding a combination of these parameters that foretaste good bone ingrowth.
AUTHOR García-Lizarribar, Andrea and Villasante, Aranzazu and Lopez-Martin, Jose Antonio and Flandez, Marta and Soler-Vázquez, M. Carmen and Serra, Dolors and Herrero, Laura and Sagrera, Ana and Efeyan, Alejo and Samitier, Josep
Title 3D bioprinted functional skeletal muscle models have potential applications for studies of muscle wasting in cancer cachexia [Abstract]
Year 2023
Journal/Proceedings Biomaterials Advances
Reftype
DOI/URL URL DOI
Abstract
Acquired muscle diseases such as cancer cachexia are responsible for the poor prognosis of many patients suffering from cancer. In vitro models are needed to study the underlying mechanisms of those pathologies. Extrusion bioprinting is an emerging tool to emulate the aligned architecture of fibers while implementing additive manufacturing techniques in tissue engineering. However, designing bioinks that reconcile the rheological needs of bioprinting and the biological requirements of muscle tissue is a challenging matter. Here we formulate a biomaterial with dual crosslinking to modulate the physical properties of bioprinted models. We design 3D bioprinted muscle models that resemble the mechanical properties of native tissue and show improved proliferation and high maturation of differentiated myotubes suggesting that the GelMA-AlgMA-Fibrin biomaterial possesses myogenic properties. The electrical stimulation of the 3D model confirmed the contractile capability of the tissue and enhanced the formation of sarcomeres. Regarding the functionality of the models, they served as platforms to recapitulate skeletal muscle diseases such as muscle wasting produced by cancer cachexia. The genetic expression of 3D models demonstrated a better resemblance to the muscular biopsies of cachectic mouse models. Altogether, this biomaterial is aimed to fabricate manipulable skeletal muscle in vitro models in a non-costly, fast and feasible manner.
AUTHOR Juraski, Amanda C. and Sharma, Sonali and Sparanese, Sydney and da Silva, Victor A. and Wong, Julie and Laksman, Zachary and Flannigan, Ryan and Rohani, Leili and Willerth, Stephanie M.
Title 3D bioprinting for organ and organoid models and disease modeling [Abstract]
Year 2023
Journal/Proceedings Expert Opinion on Drug Discovery
Reftype
DOI/URL DOI
Abstract
ABSTRACTIntroduction 3D printing, a versatile additive manufacturing technique, has diverse applications ranging from transportation, rapid prototyping, clean energy, and medical devices.Areas covered The authors focus on how 3D printing technology can enhance the drug discovery process through automating tissue production that enables high-throughput screening of potential drug candidates. They also discuss how the 3D bioprinting process works and what considerations to address when using this technology to generate cell laden constructs for drug screening as well as the outputs from such assays necessary for determining the efficacy of potential drug candidates. They focus on how bioprinting how has been used to generate cardiac, neural, and testis tissue models, focusing on bio-printed 3D organoids.Expert opinion The next generation of 3D bioprinted organ model holds great promises for the field of medicine. In terms of drug discovery, the incorporation of smart cell culture systems and biosensors into 3D bioprinted models could provide highly detailed and functional organ models for drug screening. By addressing current challenges of vascularization, electrophysiological control, and scalability, researchers can obtain more reliable and accurate data for drug development, reducing the risk of drug failures during clinical trials.
AUTHOR Lim, Joshua and Bupphathong, Sasinan and Huang, Wei and Lin, Chih-Hsin
Title 3D bioprinting of biocompatible photosensitive polymers for tissue engineering application [Abstract]
Year 2023
Journal/Proceedings Tissue Engineering Part B: Reviews
Reftype
DOI/URL DOI
Abstract
Three-dimensional (3D) bioprinting, or additive manufacturing, is a rapid fabrication technique with the foremost objective of creating biomimetic tissue and organ replacements in hopes of restoring normal tissue function and structure. Generating the engineered organs with an infrastructure that is similar to that of the real organs can be beneficial to simulate the functional organs that work inside our bodies. Photopolymerization-based 3D bioprinting, or photocuring, has emerged as a promising method in engineering biomimetic tissues due to its simplicity, non-invasive, and spatially controllable approach. In this review, we investigated types of 3D printers, mainstream materials, photoinitiators, phototoxicity, and selected tissue engineering applications of 3D photopolymerization bioprinting.
AUTHOR Liu, Chun and Dai, Ting and Wu, Xiaoyu and Ma, Jiayi and Liu, Jun and Wu, Siyu and Yang, Lei and Zhao, Hongbin
Title 3D bioprinting of cell-laden nano-attapulgite/gelatin methacrylate composite hydrogel scaffolds for bone tissue repair [Abstract]
Year 2023
Journal/Proceedings Journal of Materials Science & Technology
Reftype
DOI/URL URL DOI
Abstract
Bone tissue engineering (BTE) has proven to be a promising strategy for bone defect repair. Due to its excellent biological properties, gelatin methacrylate (GelMA) hydrogels have been used as bioinks for 3D bioprinting in some BTE studies to produce scaffolds for bone regeneration. However, applications for load-bearing defects are limited by poor mechanical properties and a lack of bioactivity. In this study, 3D printing technology was used to create nano-attapulgite (nano-ATP)/GelMA composite hydrogels loaded into mouse bone mesenchymal stem cells (BMSCs) and mouse umbilical vein endothelial cells (MUVECs). The bioprintability, physicochemical properties, and mechanical properties were all thoroughly evaluated. Our findings showed that nano-ATP groups outperform the control group in terms of printability, indicating that nano-ATP is beneficial for printability. Additionally, after incorporation with nano-ATP, the mechanical strength of the composite hydrogels was significantly improved, resulting in adequate mechanical properties for bone regeneration. The presence of nano-ATP in the scaffolds has also been studied for cell-material interactions. The findings show that cells within the scaffold not only have high viability but also a clear proclivity to promote osteogenic differentiation of BMSCs. Besides, the MUVECs-loaded composite hydrogels demonstrated increased angiogenic activity. A cranial defect model was also developed to evaluate the bone repair capability of scaffolds loaded with rat BMSCs. According to histological analysis, cell-laden nano-ATP composite hydrogels can effectively improve bone regeneration and promote angiogenesis. This study demonstrated the potential of nano-ATP for bone tissue engineering, which should also increase the clinical practicality of nano-ATP.
AUTHOR Cernencu, Alexandra I. and Vlasceanu, George M. and Serafim, Andrada and Pircalabioru, Gratiela and Ionita, Mariana
Title 3D double-reinforced graphene oxide – nanocellulose biomaterial inks for tissue engineered constructs [Abstract]
Year 2023
Journal/Proceedings RSC Adv.
Reftype
DOI/URL DOI
Abstract
The advent of improved fabrication technologies{,} particularly 3D printing{,} has enabled the engineering of bone tissue for patient-specific healing and the fabrication of in vitro tissue models for ex vivo testing. However{,} inks made from natural polymers often fall short in terms of mechanical strength{,} stability{,} and the induction of osteogenesis. Our research focused on developing novel printable formulations using a gelatin/pectin polymeric matrix that integrate synergistic reinforcement components i.e. graphene oxide (GO) and oxidized nanocellulose fibers (CNF). Using 3D printing technology and the aforementioned biomaterial composite inks{,} bone-like scaffolds were created. To simulate critical-sized flaws and demonstrate scaffold fidelity{,} 3D scaffolds were successfully printed using formulations with varied GO concentrations (0.25{,} 0.5{,} and 1% wt with respect to polymer content). The addition of GO to hydrogel inks enhanced not only the compressive modulus but also the printability and scaffold fidelity compared to the pure colloid-gelatin/pectin system. Due to its strong potential for 3D bioprinting{,} the sample containing 0.5% GO is shown to have the greatest perspectives for bone tissue models and tissue engineering applications.
AUTHOR Zhang, Yu-cheng and Xue, Ya-qi and Ogawa, Takayo and Wada, Satoshi and Wang, Jin-Ye
Title 3D Printed Alginate Hydrogels with Stiffness-Gradient Structure in a Carbomer Supporting Bath by Controlled Ca2+ Diffusion [Abstract]
Year 2023
Journal/Proceedings ACS Appl. Eng. Mater.
Reftype
DOI/URL URL DOI
Abstract
Manufacturing biocompatible materials with higher-order structure has great significance because they can mimic the extracellular medium of the human organism and are a novel strategy for tissue regeneration. In this study, a device with stiffness-gradient characteristics based on two biocompatible materials, alginate with presolidification and photocurable acrylamide-containing supporting bath, was designed and constructed by the 3D printing technique. The presolidification can avoid rapid diffusion of alginate in aqueous solutions, improve mechanical properties without the introduction of heterogeneous gel precursor, and endow gradient stiffness by the controlled diffusion of calcium ions. Besides, a photocurable supporting bath was combined to manufacture a device with a dual-gradient structure by a 4-step procedure, including 3D printing, removal of the inner hydrogel, solidification of alginate, and curing of the supporting bath. A cylinder-like container was manufactured as the template, and the wall of the resultant container with two types of gradient structures showed parabola-like stiffness changes (open upward), resulting from calcium ion diffusion-controlled gradient solidification and alginate diffusion-controlled gradient photocuring. Moreover, the resultant device exhibited lower cytotoxicity to both adherent and suspension cells than containers manufactured with alginate. Because of the high water uptake of the photocured supporting bath, the removal of toxic metabolic products together with cell culture medium from the container leads to better cell compatibility. This diffusion-controlled device is also applicable to other additive manufacturers with biomedical significance.
AUTHOR Krstić, Nenad and Jüttner, Jens and Giegerich, Lars and Mayer, Margot and Knuth, Monika and Müller, Achim and Thielemann, Christiane
Title 3D printed biosensor for continuous glucose measurement in cell cultures [Abstract]
Year 2023
Journal/Proceedings Annals of 3D Printed Medicine
Reftype
DOI/URL URL DOI
Abstract
A novel 3D-printed glucose sensor is presented for cell culture application. Glucose sensing was performed using a fluorescence resonance energy transfer (FRET)-based assay principle based on ConA and dextran. Both molecules are encapsulated in alginate microspheres and embedded in the UV-curable, stable hydrogel polyvinyl alcohol (PVA). The rheology of the formulation was adapted to obtain good properties for an extrusion-based printing process. The printed sensor structures were tested for their ability to detect glucose in vitro. A proportional increase in fluorescence intensity was observed in a concentration range of 0 - 2 g/L glucose. Tests with HEK cell cultures also showed good cell compatibility and excellent adhesion properties on plasma-treated Petri dishes. The printed sensors were able to detect the glucose decay associated with the metabolic activities of the fast-growing HEK cells in the cell culture medium over ten days. The proof-of-principle study shows that metabolic processes in cell cultures can be monitored with the new printed sensor using a standard fluorescence wide-field microscope.
AUTHOR Li, Jianfeng and Reimers, Armin and Dang, Ka My and Brunk, Michael G. K. and Drewes, Jonas and Hirsch, Ulrike M. and Willems, Christian and Schmelzer, Christian E. H. and Groth, Thomas and Nia, Ali Shaygan and Feng, Xinliang and Adelung, Rainer and Sacher, Wesley D. and Schütt, Fabian and Poon, Joyce K. S.
Title 3D printed neural tissues with in situ optical dopamine sensors [Abstract]
Year 2023
Journal/Proceedings Biosensors and Bioelectronics
Reftype
DOI/URL URL DOI
Abstract
Engineered neural tissues serve as models for studying neurological conditions and drug screening. Besides observing the cellular physiological properties, in situ monitoring of neurochemical concentrations with cellular spatial resolution in such neural tissues can provide additional valuable insights in models of disease and drug efficacy. In this work, we demonstrate the first three-dimensional (3D) tissue cultures with embedded optical dopamine (DA) sensors. We developed an alginate/Pluronic F127 based bio-ink for human dopaminergic brain tissue printing with tetrapodal-shaped-ZnO microparticles (t-ZnO) additive as the DA sensor. DA quenches the autofluorescence of t-ZnO in physiological environments, and the reduction of the fluorescence intensity serves as an indicator of the DA concentration. The neurons that were 3D printed with the t-ZnO showed good viability, and extensive 3D neural networks were formed within one week after printing. The t-ZnO could sense DA in the 3D printed neural network with a detection limit of 0.137 μM. The results are a first step toward integrating tissue engineering with intensiometric biosensing for advanced artificial tissue/organ monitoring.
AUTHOR Alqahtani, Abdulsalam A. and Ahmed, Mohammed Muqtader and Mohammed, Abdul Aleem and Ahmad, Javed
Title 3D Printed Pharmaceutical Systems for Personalized Treatment in Metabolic Syndrome [Abstract]
Year 2023
Journal/Proceedings Pharmaceutics
Reftype
DOI/URL URL DOI
Abstract
The current healthcare system is widely based on the concept of “one size fit for all”, which emphasizes treating a disease by prescribing the same drug to all patients with equivalent doses and dosing frequency. This medical treatment scenario has shown varied responses with either no or weak pharmacological effects and exaggerated adverse reactions preceded by more patient complications. The hitches to the concept of “one size fits all” have devoted the attention of many researchers to unlocking the concept of personalized medicine (PM). PM delivers customized therapy with the highest safety margin for an individual patient’s needs. PM has the potential to revolutionize the current healthcare system and pave the way to alter drug choices and doses according to a patient’s clinical responses, providing physicians with the best treatment outcomes. The 3D printing techniques is a solid-form fabrication method whereby successive layers of materials based on computer-aided designs were deposited to form 3D structures. The 3D printed formulation achieves PM goals by delivering the desired dose according to patient needs and drug release profile to achieve a patient’s personal therapeutic and nutritional needs. This pre-designed drug release profile attains optimum absorption and distribution, exhibiting maximum efficacy and safety profiles. This review aims to focus on the role of the 3D printing technique as a promising tool to design PM in metabolic syndrome (MS).
AUTHOR Wang, Bin and Barceló, Xavier and Von Euw, Stanislas and Kelly, Daniel J.
Title 3D printing of mechanically functional meniscal tissue equivalents using high concentration extracellular matrix inks [Abstract]
Year 2023
Journal/Proceedings Materials Today Bio
Reftype
DOI/URL URL DOI
Abstract
Decellularized extracellular matrix (dECM) has emerged as a promising biomaterial in the fields of tissue engineering and regenerative medicine due to its ability to provide specific biochemical and biophysical cues supportive of the regeneration of diverse tissue types. Such biomaterials have also been used to produce tissue-specific inks and bioinks for 3D printing applications. However, a major limitation associated with the use of such dECM materials is their poor mechanical properties, which limits their use in load-bearing applications such as meniscus regeneration. In this study, native porcine menisci were solubilized and decellularized using different methods to produce highly concentrated dECM inks of differing biochemical content and printability. All dECM inks displayed shear thinning and thixotropic properties, with increased viscosity and improved printability observed at higher pH levels, enabling the 3D printing of anatomically defined meniscal implants. With additional crosslinking of the dECM inks following thermal gelation at pH 11, it was possible to fabricate highly elastic meniscal tissue equivalents with compressive mechanical properties similar to the native tissue. These improved mechanical properties at higher pH correlated with the development of a denser network of smaller diameter collagen fibers. These constructs also displayed repeatable loading and unloading curves when subjected to long-term cyclic compression tests. Moreover, the printing of dECM inks at the appropriate pH promoted a preferential alignment of the collagen fibers. Altogether, these findings demonstrate the potential of 3D printing of highly concentrated meniscus dECM inks to produce mechanically functional and biocompatible implants for meniscal tissue regeneration. This approach could be applied to a wide variety of different biological tissues, enabling the 3D printing of tissue mimics with diverse applications from tissue engineering to surgical planning.
AUTHOR van Charante, Frits and Martínez-Pérez, David and Guarch-Pérez, Clara and Courtens, Charlotte and Sass, Andrea and Choińska, Emilia and Idaszek, Joanna and Van Calenbergh, Serge and Riool, Martijn and Zaat, Sebastian A. J. and Święszkowski, Wojciech and Coenye, Tom
Title 3D-printed wound dressings containing a fosmidomycin-derivative prevent Acinetobacter baumannii biofilm formation [Abstract]
Year 2023
Journal/Proceedings iScience
Reftype
DOI/URL URL DOI
Abstract
Summary Acinetobacter baumannii causes a wide range of infections, including wound infections. Multidrug-resistant A. baumannii is a major healthcare concern and the development of novel treatments against these infections is needed. Fosmidomycin is a repurposed antimalarial drug targeting the non-mevalonate pathway, and several derivatives show activity towards A. baumannii. We evaluated the antimicrobial activity of CC366, a fosmidomycin prodrug, against a collection of A. baumannii strains, using various in vitro and in vivo models; emphasis was placed on the evaluation of its anti-biofilm activity. We also developed a 3D-printed wound dressing containing CC366, using melt electrowriting technology. Minimal inhibitory concentrations of CC366 ranged from 1 to 64 μg/mL, and CC366 showed good biofilm inhibitory and moderate biofilm eradicating activity in vitro. CC366 successfully eluted from a 3D-printed dressing, the dressings prevented the formation of A. baumannnii wound biofilms in vitro and reduced A. baumannii infection in an in vivo mouse model.
AUTHOR Khalid, Muhammad Yasir and Arif, Zia Ullah and Noroozi, Reza and Hossain, Mokarram and Ramakrishna, Seeram and Umer, Rehan
Title 3D/4D printing of cellulose nanocrystals-based biomaterials: Additives for sustainable applications [Abstract]
Year 2023
Journal/Proceedings International Journal of Biological Macromolecules
Reftype
DOI/URL URL DOI
Abstract
Cellulose nanocrystals (CNCs) have gained significant attraction from both industrial and academic sectors, thanks to their biodegradability, non-toxicity, and renewability with remarkable mechanical characteristics. Desirable mechanical characteristics of CNCs include high stiffness, high strength, excellent flexibility, and large surface-to-volume ratio. Additionally, the mechanical properties of CNCs can be tailored through chemical modifications for high-end applications including tissue engineering, actuating, and biomedical. Modern manufacturing methods including 3D/4D printing are highly advantageous for developing sophisticated and intricate geometries. This review highlights the major developments of additive manufactured CNCs, which promote sustainable solutions across a wide range of applications. Additionally, this contribution also presents current challenges and future research directions of CNC-based composites developed through 3D/4D printing techniques for myriad engineering sectors including tissue engineering, wound healing, wearable electronics, robotics, and anti-counterfeiting applications. Overall, this review will greatly help research scientists from chemistry, materials, biomedicine, and other disciplines to comprehend the underlying principles, mechanical properties, and applications of additively manufactured CNC-based structures.
AUTHOR Estermann, Manuela and Coelho, Ricardo and Jacob, Francis and Huang, Yen-Lin and Liang, Ching-Yeu and Faia-Torres, Ana Bela and Septiadi, Dedy and Drasler, Barbara and Karakocak, Bedia Begum and Dijkhoff, Irini Magdelina and Petri-Fink, Alke and Heinzelmann-Schwarz, Viola and Rothen-Rutishauser, Barbara
Title A 3D multi-cellular tissue model of the human omentum to study the formation of ovarian cancer metastasis [Abstract]
Year 2023
Journal/Proceedings Biomaterials
Reftype
DOI/URL URL DOI
Abstract
Reliable and predictive experimental models are urgently needed to study metastatic mechanisms of ovarian cancer cells in the omentum. Although models for ovarian cancer cell adhesion and invasion were previously investigated, the lack of certain omental cell types, which influence the metastatic behavior of cancer cells, limits the application of these tissue models. Here, we describe a 3D multi-cellular human omentum tissue model, which considers the spatial arrangement of five omental cell types. Reproducible tissue models were fabricated combining permeable cell culture inserts and bioprinting technology to mimic metastatic processes of immortalized and patient-derived ovarian cancer cells. The implementation of an endothelial barrier further allowed studying the interaction between cancer and endothelial cells during hematogenous dissemination and the impact of chemotherapeutic drugs. This proof-of-concept study may serve as a platform for patient-specific investigations in personalized oncology in the future.
AUTHOR Wesdorp, Marinus A. and Schwab, Andrea and Bektas, Ezgi Irem and Narcisi, Roberto and Eglin, David and Stoddart, Martin J. and Van Osch, Gerjo J. V. M. and D'Este, Matteo
Title A culture model to analyze the acute biomaterial-dependent reaction of human primary neutrophils in vitro [Abstract]
Year 2023
Journal/Proceedings Bioactive Materials
Reftype
DOI/URL URL DOI
Abstract
Neutrophils play a pivotal role in orchestrating the immune system response to biomaterials, the onset and resolution of chronic inflammation, and macrophage polarization. However, the neutrophil response to biomaterials and the consequent impact on tissue engineering approaches is still scarcely understood. Here, we report an in vitro culture model that comprehensively describes the most important neutrophil functions in the light of tissue repair. We isolated human primary neutrophils from peripheral blood and exposed them to a panel of hard, soft, naturally- and synthetically-derived materials. The overall trend showed increased neutrophil survival on naturally derived constructs, together with higher oxidative burst, decreased myeloperoxidase and neutrophil elastase and decreased cytokine secretion compared to neutrophils on synthetic materials. The culture model is a step to better understand the immune modulation elicited by biomaterials. Further studies are needed to correlate the neutrophil response to tissue healing and to elucidate the mechanism triggering the cell response and their consequences in determining inflammation onset and resolution.
AUTHOR Dairaghi, Jacob and Benito Alston, Claudia and Cadle, Rachel and Rogozea, Dan and Solorio, Luis and Barco, Clark T. and Moldovan, Nicanor I.
Title A dual osteoconductive-osteoprotective implantable device for vertical alveolar ridge augmentation [Abstract]
Year 2023
Journal/Proceedings Frontiers in Dental Medicine
Reftype
DOI/URL DOI
Abstract
Repair of large oral bone defects such as vertical alveolar ridge augmentation could benefit from the rapidly developing additive manufacturing technology used to create personalized osteoconductive devices made from porous tricalcium phosphate/hydroxyapatite (TCP/HA)-based bioceramics. These devices can be also used as hydrogel carriers to improve their osteogenic potential. However, the TCP/HA constructs are prone to brittle fracture, therefore their use in clinical situations is difficult. As a solution, we propose the protection of this osteoconductive multi-material (herein called “core”) with a shape-matched “cover” made from biocompatible poly-ɛ-caprolactone (PCL), which is a ductile, and thus more resistant polymeric material. In this report, we present a workflow starting from patient-specific medical scan in Digital Imaging and Communications in Medicine (DICOM) format files, up to the design and 3D printing of a hydrogel-loaded porous TCP/HA core and of its corresponding PCL cover. This cover could also facilitate the anchoring of the device to the patient's defect site via fixing screws. The large, linearly aligned pores in the TCP/HA bioceramic core, their sizes, and their filling with an alginate hydrogel were analyzed by micro-CT. Moreover, we created a finite element analysis (FEA) model of this dual-function device, which permits the simulation of its mechanical behavior in various anticipated clinical situations, as well as optimization before surgery. In conclusion, we designed and 3D-printed a novel, structurally complex multi-material osteoconductive-osteoprotective device with anticipated mechanical properties suitable for large-defect oral bone regeneration.
AUTHOR Rikkers, Margot and Nguyen, H. Chien and Golafshan, Nasim and de Ruijter, Mylène and Levato, Riccardo and Vonk, Lucienne A. and van Egmond, Nienke and Castilho, Miguel and Custers, Roel J. H. and Malda, Jos
Title A Gap-Filling, Regenerative Implant for Open-Wedge Osteotomy [Abstract]
Year 2023
Journal/Proceedings Journal of Cartilage & Joint Preservation
Reftype
DOI/URL URL DOI
Abstract
Purpose In patients suffering from unilateral osteoarthritis in the knee, an osteotomy can provide symptomatic relief and postpone the need for replacement of the joint. Nevertheless, open-wedge osteotomies (OWO) around the knee joint face several challenges like postoperative pain and bone non-union. In this study, the aim was to design, fabricate, and evaluate a gap-filling implant for OWO using an osteoinductive and degradable biomaterial. Methods Design of porous wedge-shaped implants was based on computed tomography (CT) scans of cadaveric legs. Implants were 3D printed using a magnesium strontium phosphate-polycaprolactone (MgPSr-PCL) biomaterial ink. Standardized scaffolds with different inter-fibre spacing (IFS) were mechanically characterized and osteoinductive properties of the biomaterial were assessed in vitro. Finally, human-sized implants with different heights (5 mm, 10 mm, 15 mm) were designed and fabricated for ex vivo implantation during three OWO procedures in human cadaveric legs. Results Implants printed with an interior of IFS-1.0 resulted in scaffolds that maintained top and bottom porosity, while the interior of the implant exhibited significant mechanical stability. Bone marrow concentrate and culture expanded mesenchymal stromal cells attached to the MgPSr-PCL material and proliferated over 21 days in culture. The production of osteogenic markers alkaline phosphatase activity, calcium, and osteocalcin was promoted in all culture conditions, independent of osteogenic induction medium. Finally, three OWO procedures were planned and fabricated wedges were implanted ex vivo during the procedures. A small fraction of one side of the wedges was resected to assure fit into the proximal biplanar osteotomy gap. Pre-planned wedge heights were maintained after implantation as measured by micro-CT. Conclusion To conclude, personalized implants for implantation in open-wedge osteotomies were successfully designed and manufactured. The implant material supported osteogenesis of MSCs and BMC in vitro and full-size implants were successfully implemented into the surgical procedure, without compromising pre-planned wedge height.
AUTHOR Moon, Seongjun and Neale, Dylan B. and Kim, Do Hoon and Mukherji, Malini and Hughes, Elliot and Deng, Yuxuan and Kerneis, Fabienne and Luo, Xiuquan and Tharp, Darron and Bognar, Ernest and Stanbery, Laura and Nemunaitis, John and Chun, Tae-Hwa and Lahann, Joerg
Title A Scalable Engineered Extracellular Matrix Platform to Expand Tumor Cells [Abstract]
Year 2023
Journal/Proceedings Advanced NanoBiomed Research
Reftype
DOI/URL DOI
Abstract
The demand for high-throughput and scalable cell expansion platforms that can accommodate diverse cell types remains a critical requirement across various biomedical fields. Fibronectin (Fn), an essential component of the extracellular matrix (ECM), has been used as a conformal surface coating for two-dimensional (2D) cell culture systems. However, the soluble, globular Fn used for 2D coatings differs structurally from the native Fn, which possesses a three-dimensional (3D) fibrillar structure. Herein, a large-scale engineered ECM (EECM) cell expansion platform based on a 3D fibrillar Fn network spanning over centimeters is presented. Extended fibrillar networks are formed by shearing dilute Fn solutions over tessellated polymeric scaffolds, which are conveniently prepared by 3D printing. The structure and size of the Fn-based 3D EECM scaffold are optimized by evaluating the proliferation of a colorectal tumor cell line, CT26, commonly used in the in vivo tumor immunotherapy models. The 3D EECM scaffolds support a fourfold more efficient tumor cell expansion than a conventional 2D culture system, demonstrating the potential efficacy in supporting the robust expansion of cancer cells ex vivo with an eye on cancer immunotherapy.
AUTHOR Daskalakis, Evangelos and Hassan, Mohamed H. and Omar, Abdalla M. and Acar, Anil A. and Fallah, Ali and Cooper, Glen and Weightman, Andrew and Blunn, Gordon and Koc, Bahattin and Bartolo, Paulo
Title Accelerated Degradation of Poly-ε-caprolactone Composite Scaffolds for Large Bone Defects [Abstract]
Year 2023
Journal/Proceedings Polymers
Reftype
DOI/URL URL DOI
Abstract
This research investigates the accelerated hydrolytic degradation process of both anatomically designed bone scaffolds with a pore size gradient and a rectangular shape (biomimetically designed scaffolds or bone bricks). The effect of material composition is investigated considering poly-ε-caprolactone (PCL) as the main scaffold material, reinforced with ceramics such as hydroxyapatite (HA), β-tricalcium phosphate (TCP) and bioglass at a concentration of 20 wt%. In the case of rectangular scaffolds, the effect of pore size (200 μm, 300 μm and 500 μm) is also investigated. The degradation process (accelerated degradation) was investigated during a period of 5 days in a sodium hydroxide (NaOH) medium. Degraded bone bricks and rectangular scaffolds were measured each day to evaluate the weight loss of the samples, which were also morphologically, thermally, chemically and mechanically assessed. The results show that the PCL/bioglass bone brick scaffolds exhibited faster degradation kinetics in comparison with the PCL, PCL/HA and PCL/TCP bone bricks. Furthermore, the degradation kinetics of rectangular scaffolds increased by increasing the pore size from 500 μm to 200 μm. The results also indicate that, for the same material composition, bone bricks degrade slower compared with rectangular scaffolds. The scanning electron microscopy (SEM) images show that the degradation process was faster on the external regions of the bone brick scaffolds (600 μm pore size) compared with the internal regions (200 μm pore size). The thermal gravimetric analysis (TGA) results show that the ceramic concentration remained constant throughout the degradation process, while differential scanning calorimetry (DSC) results show that all scaffolds exhibited a reduction in crystallinity (Xc), enthalpy (Δm) and melting temperature (Tm) throughout the degradation process, while the glass transition temperature (Tg) slightly increased. Finally, the compression results show that the mechanical properties decreased during the degradation process, with PCL/bioglass bone bricks and rectangular scaffolds presenting higher mechanical properties with the same design in comparison with the other materials.
AUTHOR Arif, Zia Ullah and Khalid, Muhammad Yasir and Noroozi, Reza and Hossain, Mokarram and Shi, HaoTian Harvey and Tariq, Ali and Ramakrishna, Seeram and Umer, Rehan
Title Additive manufacturing of sustainable biomaterials for biomedical applications [Abstract]
Year 2023
Journal/Proceedings Asian Journal of Pharmaceutical Sciences
Reftype
DOI/URL URL DOI
Abstract
Biopolymers are promising environmentally benign materials applicable in multifarious applications. They are especially favorable in implantable biomedical devices thanks to their excellent unique properties, including bioactivity, renewability, bioresorbability, biocompatibility, biodegradability, and hydrophilicity. Additive manufacturing (AM) is a flexible and intricate manufacturing technology, which is widely used to fabricate biopolymer-based customized products and structures for advanced healthcare systems. Three-dimensional (3D) printing of these sustainable materials is applied in functional clinical settings including wound dressing, drug delivery systems, medical implants, and tissue engineering. The present review highlights recent advancements in different types of biopolymers, such as proteins and polysaccharides, which are employed to develop different biomedical products by using extrusion, vat polymerization, laser, and inkjet 3D printing techniques in addition to normal bioprinting and four-dimensional (4D) bioprinting techniques. This review also incorporates the influence of nanoparticles on the biological and mechanical performances of 3D-printed tissue scaffolds. This work also addresses current challenges as well as future developments of environmentally friendly polymeric materials manufactured through the AM techniques. Ideally, there is a need for more focused research on the adequate blending of these biodegradable biopolymers for achieving useful results in targeted biomedical areas. We envision that biopolymer-based 3D-printed composites have the potential to revolutionize the biomedical sector in the near future.
AUTHOR Mandal, Shovon and Nagi, Gurpreet Kaur and Corcoran, Alina A. and Agrawal, Ruchi and Dubey, Mukul and Hunt, Ryan W.
Title Algal polysaccharides for 3D printing: A review [Abstract]
Year 2023
Journal/Proceedings Carbohydrate Polymers
Reftype
DOI/URL URL DOI
Abstract
Algae hold particular promise as a feedstock for biomaterials, as they are capable of producing a wide variety of polymers with the properties required for 3D printing. However, the use of algal polymers has been limited to alginate, agar, carrageenan, and ulvan extracted from seaweeds. Diverse algal taxa beyond seaweeds have yet to be explored. In this comprehensive review, we discuss available algal biomaterials, their properties, and emerging applications in 3D printing techniques. We also identify elite algal strains to be used in 3D printing and comment on both advantages and limitations of algal biomass as a printing material. Global 3D printing market trends and material demands are also critically analyzed. Finally, the future prospects, opportunities, and challenges for using algal polymers in 3D printing market for a sustainable economy are discussed. We hope this review will provide a foundation for exploring the 3D printable biomaterials from algae.
AUTHOR Silvestri, Alessandro and Vázquez-Díaz, Silvia and Misia, Giuseppe and Poletti, Fabrizio and López-Domene, Rocío and Pavlov, Valeri and Zanardi, Chiara and Cortajarena, Aitziber L. and Prato, Maurizio
Title An Electroactive and Self-Assembling Bio-Ink, based on Protein-Stabilized Nanoclusters and Graphene, for the Manufacture of Fully Inkjet-Printed Paper-Based Analytical Devices [Abstract]
Year 2023
Journal/Proceedings Small
Reftype
DOI/URL DOI
Abstract
Abstract Hundreds of new electrochemical sensors are reported in literature every year. However, only a few of them makes it to the market. Manufacturability, or rather the lack of it, is the parameter that dictates if new sensing technologies will remain forever in the laboratory in which they are conceived. Inkjet printing is a low-cost and versatile technique that can facilitate the transfer of nanomaterial-based sensors to the market. Herein, an electroactive and self-assembling inkjet-printable ink based on protein-nanomaterial composites and exfoliated graphene is reported. The consensus tetratricopeptide proteins (CTPRs), used to formulate this ink, are engineered to template and coordinate electroactive metallic nanoclusters (NCs), and to self-assemble upon drying, forming stable films. The authors demonstrate that, by incorporating graphene in the ink formulation, it is possible to dramatically improve the electrocatalytic properties of the ink, obtaining an efficient hybrid material for hydrogen peroxide (H2O2) detection. Using this bio-ink, the authors manufactured disposable and environmentally sustainable electrochemical paper-based analytical devices (ePADs) to detect H2O2, outperforming commercial screen-printed platforms. Furthermore, it is demonstrated that oxidoreductase enzymes can be included in the formulation, to fully inkjet-print enzymatic amperometric biosensors ready to use.
AUTHOR Anupama Sekar, J. and Velayudhan, Shiny and Anil Kumar, P. R.
Title Biocompatibility evaluation of antioxidant cocktail loaded gelatin methacrylamide as bioink for extrusion-based 3D bioprinting [Abstract]
Year 2023
Journal/Proceedings Biomedical Materials
Reftype
DOI/URL DOI
Abstract
Three-dimensional (3D) liver bioprinting is a promising technique for creating 3D liver models that can be used for in vitro drug testing, hepatotoxicity studies, and transplantation. The functional performance of 3D bioprinted liver constructs are limited by the lack of cell–cell interactions, which calls for the creation of bioprinted tissue constructs with high cell densities. This study reports the fabrication of 3D bioprinted liver constructs using a novel photocrosslinkable gelatin methacrylamide (GelMA)-based bioink formulation. However, the formation of excess free radicals during photoinitiation poses a challenge, particularly during photocrosslinking of large constructs with high cell densities. Hence, we designed a bioink formulation comprising the base polymer GelMA loaded with an antioxidant cocktail containing vitamin C (L-ascorbic acid (AA)) and vitamin E (α-tocopherol (α-Toc)). We confirmed that the combination of antioxidants loaded in GelMA enhanced the ability to scavenge intracellular reactive oxygen species formed during photocrosslinking. The GelMA formulation was evaluated for biocompatibility in vitro and in vivo. These results demonstrated that the bioink had adequate rheological characteristics and was biocompatible. Furthermore, when compared to bioprinted constructs with lower cell density, high-density primary rat hepatocyte constructs demonstrated improved cell-cell interactions and liver-specific functions like albumin and urea secretion, which increased 5-fold and 2.5-fold, respectively.
AUTHOR Xing, Ruirui and Yuan, Chengqian and Fan, Wei and Ren, Xiaokang and Yan, Xuehai
Title Biomolecular glass with amino acid and peptide nanoarchitectonics [Abstract]
Year 2023
Journal/Proceedings Science Advances
Reftype
DOI/URL DOI
Abstract
Glass is ubiquitous in life and widely used in various fields. However, there is an urgent need to develop biodegradable and biorecyclable glasses that have a minimal environmental footprint toward a sustainable society and a circular materials economy. Here, we report a family of eco-friendly glasses of biological origin fabricated using biologically derived amino acids or peptides through the classic heating-quenching procedure. Amino acids and peptides with chemical modification at their ends are found able to form a supercooled liquid before decomposition and eventually glass upon quenching. These developed glasses exhibit excellent glass-forming ability and optical characteristics and are amenable to three-dimensional–printed additive manufacturing and mold casting. Crucially, the glasses show biocompatibility, biodegradability, and biorecyclability beyond the currently used commercial glasses and plastic materials. Biodegradable and biorecyclable glasses developed from amino acids exhibit functionality and sustainability.
AUTHOR Ostrovidov, Serge and Ramalingam, Murugan and Bae, Hojae and Orive, Gorka and Fujie, Toshinori and Shi, Xuetao and Kaji, Hirokazu
Title Bioprinting and biomaterials for dental alveolar tissue regeneration. [Abstract]
Year 2023
Journal/Proceedings Frontiers in bioengineering and biotechnology
Reftype
DOI/URL
Abstract
Three dimensional (3D) bioprinting is a powerful tool, that was recently applied to tissue engineering. This technique allows the precise deposition of cells encapsulated in supportive bioinks to fabricate complex scaffolds, which are used to repair targeted tissues. Here, we review the recent developments in the application of 3D bioprinting to dental tissue engineering. These tissues, including teeth, periodontal ligament, alveolar bones, and dental pulp, present cell types and mechanical properties with great heterogeneity, which is challenging to reproduce in vitro. After highlighting the different bioprinting methods used in regenerative dentistry, we reviewed the great variety of bioink formulations and their effects on cells, which have been established to support the development of these tissues. We discussed the different advances achieved in the fabrication of each dental tissue to provide an overview of the current state of the methods. We conclude with the remaining challenges and future needs.
AUTHOR Rezapour Sarabi, Misagh and Yetisen, Ali K. and Tasoglu, Savas
Title Bioprinting in Microgravity [Abstract]
Year 2023
Journal/Proceedings ACS Biomater. Sci. Eng.
Reftype
DOI/URL DOI
Abstract
Bioprinting as an extension of 3D printing offers capabilities for printing tissues and organs for application in biomedical engineering. Conducting bioprinting in space, where the gravity is zero, can enable new frontiers in tissue engineering. Fabrication of soft tissues, which usually collapse under their own weight, can be accelerated in microgravity conditions as the external forces are eliminated. Furthermore, human colonization in space can be supported by providing critical needs of life and ecosystems by 3D bioprinting without relying on cargos from Earth, e.g., by development and long-term employment of living engineered filters (such as sea sponges-known as critical for initiating and maintaining an ecosystem). This review covers bioprinting methods in microgravity along with providing an analysis on the process of shipping bioprinters to space and presenting a perspective on the prospects of zero-gravity bioprinting.
AUTHOR Barceló, Xavier and Garcia, Orquidea and Kelly, Daniel J.
Title Chondroitinase ABC Treatment Improves the Organization and Mechanics of 3D Bioprinted Meniscal Tissue [Abstract]
Year 2023
Journal/Proceedings ACS Biomater. Sci. Eng.
Reftype
DOI/URL DOI
Abstract
The meniscus is a fibrocartilage tissue that is integral to the correct functioning of the knee joint. The tissue possesses a unique collagen fiber architecture that is integral to its biomechanical functionality. In particular, a network of circumferentially aligned collagen fibers function to bear the high tensile forces generated in the tissue during normal daily activities. The limited regenerative capacity of the meniscus has motivated increased interest in meniscus tissue engineering; however, the in vitro generation of structurally organized meniscal grafts with a collagen architecture mimetic of the native meniscus remains a significant challenge. Here we used melt electrowriting (MEW) to produce scaffolds with defined pore architectures to impose physical boundaries upon cell growth and extracellular matrix production. This enabled the bioprinting of anisotropic tissues with collagen fibers preferentially oriented parallel to the long axis of the scaffold pores. Furthermore, temporally removing glycosaminoglycans (sGAGs) during the early stages of in vitro tissue development using chondroitinase ABC (cABC) was found to positively impact collagen network maturation. Specially we found that temporal depletion of sGAGs is associated with an increase in collagen fiber diameter without any detrimental effect on the development of a meniscal tissue phenotype or subsequent extracellular matrix production. Moreover, temporal cABC treatment supported the development of engineered tissues with superior tensile mechanical properties compared to empty MEW scaffolds. These findings demonstrate the benefit of temporal enzymatic treatments when engineering structurally anisotropic tissues using emerging biofabrication technologies such as MEW and inkjet bioprinting.
AUTHOR Golafshan, Nasim and Castilho, Miguel and Daghrery, Arwa and Alehosseini, Morteza and van de Kemp, Tom and Krikonis, Konstantinos and de Ruijter, Mylene and Dal-Fabbro, Renan and Dolatshahi-Pirouz, Alireza and Bhaduri, Sarit B. and Bottino, Marco C. and Malda, Jos
Title Composite Graded Melt Electrowritten Scaffolds for Regeneration of the Periodontal Ligament-to-Bone Interface
Year 2023
Journal/Proceedings ACS Appl. Mater. Interfaces
Reftype
DOI/URL DOI
AUTHOR Fuchs, Andreas and Bartolf-Kopp, Michael and Böhm, Hartmut and Straub, Anton and Kübler, Alexander C. and Linz, Christian and Gbureck, Uwe
Title Composite grafts made of polycaprolactone fiber mats and oil-based calcium phosphate cement pastes for the reconstruction of cranial and maxillofacial defects [Abstract]
Year 2023
Journal/Proceedings Clinical Oral Investigations
Reftype Fuchs2023
DOI/URL DOI
Abstract
Synthetic bone substitutes which can be adapted preoperatively and patient specific may be helpful in various bony defects in the field of oral- and maxillofacial surgery. For this purpose, composite grafts made of self-setting and oil-based calcium phosphate cement (CPC) pastes, which were reinforced with 3D-printed polycaprolactone (PCL) fiber mats were manufactured.
AUTHOR Cianciosi, Alessandro and Simon, Jonas and Bartolf-Kopp, Michael and Grausgruber, Heinrich and Dargaville, Tim R. and Forget, Aurélien and Groll, Jürgen and Jungst, Tomasz and Beaumont, Marco
Title Direct ink writing of multifunctional nanocellulose and allyl-modified gelatin biomaterial inks for the fabrication of mechanically and functionally graded constructs [Abstract]
Year 2023
Journal/Proceedings Carbohydrate Polymers
Reftype
DOI/URL URL DOI
Abstract
Recreating the intricate mechanical and functional gradients found in natural tissues through additive manufacturing poses significant challenges, including the need for precise control over time and space and the availability of versatile biomaterial inks. In this proof-of-concept study, we developed a new biomaterial ink for direct ink writing, allowing the creation of 3D structures with tailorable functional and mechanical gradients. Our ink formulation combined multifunctional cellulose nanofibrils (CNFs), allyl-functionalized gelatin (0.8–2.0 wt%), and polyethylene glycol dithiol (3.0–7.5 wt%). The CNF served as a rheology modifier, whereas a concentration of 1.8 w/v % in the inks was chosen for optimal printability and shape fidelity. In addition, CNFs were functionalized with azido groups, enabling the spatial distribution of functional moieties within a 3D structure. These functional groups were further modified using a spontaneous click chemistry reaction. Through additive manufacturing and a readily available static mixer, we successfully demonstrated the fabrication of mechanical gradients – ranging from 3 to 6 kPa in indentation strength – and functional gradients. Additionally, we introduced dual gradients by combining gradient printing with an anisotropic photocrosslinking step. The developed biomaterial ink opens up possibilities for printing intricate multigradient structures, resembling the complex hierarchical organization seen in living tissues.
AUTHOR Kumar, Virender and Kaur, Harmanpreet and Kumari, Anuradha and Hooda, Goldy and Garg, Vandana and Dureja, Harish
Title Drug delivery and testing via 3D printing [Abstract]
Year 2023
Journal/Proceedings Bioprinting
Reftype
DOI/URL URL DOI
Abstract
3D printing first came into existence in the year 1984. Since then, it has found significant use in various fields, including pharmaceutical industries.3D printing is a process of manufacturing products by depositing materials layer by layer. Thus, also called additive manufacturing. Additive manufacturing provides patient-specific formulation, an advantage over conventional drug design methods. 3D printing helps in the designing of complex structures. Since the approval of the first 3D-printed tablet, this field has gained popularity. In this review, various techniques used in 3D printing have been discussed. This article further gives insight into the recent research done on AM technology. There is also some discussion about the formulations made for pediatric patients using AM technology. Different types of drug delivery systems mentioned in this work are oral, vaginal, rectal, oro-mucosal, transdermal, and implant. Further drug testing devices, including 3D-printed organoids and organ-on-chip models, have been discussed. Finally, it gives information about the future direction of this technology.
AUTHOR Nalesso, Paulo Roberto Lopes and Vedovatto, Matheus and Gregório, Julia Eduarda Schneider and Huang, Boyang and Vyas, Cian and Santamaria-Jr, Milton and Bártolo, Paulo and Caetano, Guilherme Ferreira
Title Early In Vivo Osteogenic and Inflammatory Response of 3D Printed Polycaprolactone/Carbon Nanotube/Hydroxyapatite/Tricalcium Phosphate Composite Scaffolds [Abstract]
Year 2023
Journal/Proceedings Polymers
Reftype
DOI/URL URL DOI
Abstract
The development of advanced biomaterials and manufacturing processes to fabricate biologically and mechanically appropriate scaffolds for bone tissue is a significant challenge. Polycaprolactone (PCL) is a biocompatible and degradable polymer used in bone tissue engineering, but it lacks biofunctionalization. Bioceramics, such as hydroxyapatite (HA) and β tricalcium phosphate (β-TCP), which are similar chemically to native bone, can facilitate both osteointegration and osteoinduction whilst improving the biomechanics of a scaffold. Carbon nanotubes (CNTs) display exceptional electrical conductivity and mechanical properties. A major limitation is the understanding of how PCL-based scaffolds containing HA, TCP, and CNTs behave in vivo in a bone regeneration model. The objective of this study was to evaluate the use of three-dimensional (3D) printed PCL-based composite scaffolds containing CNTs, HA, and β-TCP during the initial osteogenic and inflammatory response phase in a critical bone defect rat model. Gene expression related to early osteogenesis, the inflammatory phase, and tissue formation was evaluated using quantitative real-time PCR (RT-qPCR). Tissue formation and mineralization were assessed by histomorphometry. The CNT+HA/TCP group presented higher expression of osteogenic genes after seven days. The CNT+HA and CNT+TCP groups stimulated higher gene expression for tissue formation and mineralization, and pro- and anti-inflammatory genes after 14 and 30 days. Moreover, the CNT+TCP and CNT+HA/TCP groups showed higher gene expressions related to M1 macrophages. The association of CNTs with ceramics at 10wt% (CNT+HA/TCP) showed lower expressions of inflammatory genes and higher osteogenic, presenting a positive impact and balanced cell signaling for early bone formation. The association of CNTs with both ceramics promoted a minor inflammatory response and faster bone tissue formation.
AUTHOR Helaehil, Júlia Venturini and Helaehil, Luiza Venturini and Alves, Laryssa Fernanda and Huang, Boyang and Santamaria-Jr, Milton and Bartolo, Paulo and Caetano, Guilherme Ferreira
Title Electrical Stimulation Therapy and HA/TCP Composite Scaffolds Modulate the Wnt Pathways in Bone Regeneration of Critical-Sized Defects [Abstract]
Year 2023
Journal/Proceedings Bioengineering
Reftype
DOI/URL URL DOI
Abstract
Critical bone defects are the most difficult challenges in the area of tissue repair. Polycaprolactone (PCL) scaffolds, associated with hydroxyapatite (HA) and tricalcium phosphate (TCP), are reported to have an enhanced bioactivity. Moreover, the use of electrical stimulation (ES) has overcome the lack of bioelectricity at the bone defect site and compensated the endogenous electrical signals. Such treatments could modulate cells and tissue signaling pathways. However, there is no study investigating the effects of ES and bioceramic composite scaffolds on bone tissue formation, particularly in the view of cell signaling pathway. This study aims to investigate the application of HA/TCP composite scaffolds and ES and their effects on the Wingless-related integration site (Wnt) pathway in critical bone repair. Critical bone defects (25 mm2) were performed in rats, which were divided into four groups: PCL, PCL + ES, HA/TCP and HA/TCP + ES. The scaffolds were grafted at the defect site and applied with the ES application twice a week using 10 µA of current for 5 min. Bone samples were collected for histomorphometry, immunohistochemistry and molecular analysis. At the Wnt canonical pathway, HA/TCP and HA/TCP + ES groups showed higher Wnt1 and β-catenin gene expression levels, especially HA/TCP. Moreover, HA/TCP + ES presented higher Runx2, Osterix and Bmp-2 levels. At the Wnt non-canonical pathway, HA/TCP group showed higher voltage-gated calcium channel (Vgcc), calmodulin-dependent protein kinase II, and Wnt5a genes expression, while HA/TCP + ES presented higher protein expression of VGCC and calmodulin (CaM) at the same period. The decrease in sclerostin and osteopontin genes expressions and the lower bone sialoprotein II in the HA/TCP + ES group may be related to the early bone remodeling. This study shows that the use of ES modulated the Wnt pathways and accelerated the osteogenesis with improved tissue maturation.
AUTHOR Mungenast, Lena and Nieminen, Ronya and Gaiser, Carine and Faia-Torres, Ana Bela and Rühe, Jürgen and Suter-Dick, Laura
Title Electrospun decellularized extracellular matrix scaffolds promote the regeneration of injured neurons [Abstract]
Year 2023
Journal/Proceedings Biomaterials and Biosystems
Reftype
DOI/URL URL DOI
Abstract
Traumatic injury to the spinal cord (SCI) causes the transection of neurons, formation of a lesion cavity, and remodeling of the microenvironment by excessive extracellular matrix (ECM) deposition and scar formation leading to a regeneration-prohibiting environment. Electrospun fiber scaffolds have been shown to simulate the ECM and increase neural alignment and neurite outgrowth contributing to a growth-permissive matrix. In this work, electrospun ECM-like fibers providing biochemical and topological cues are implemented into a scaffold to represent an oriented biomaterial suitable for the alignment and migration of neural cells in order to improve spinal cord regeneration. The successfully decellularized spinal cord ECM (dECM), with no visible cell nuclei and dsDNA content < 50 ng/mg tissue, showed preserved ECM components, such as glycosaminoglycans and collagens. Serving as the biomaterial for 3D printer-assisted electrospinning, highly aligned and randomly distributed dECM fiber scaffolds (< 1 µm fiber diameter) were fabricated. The scaffolds were cytocompatible and supported the viability of a human neural cell line (SH-SY5Y) for 14 days. Cells were selectively differentiated into neurons, as confirmed by immunolabeling of specific cell markers (ChAT, Tubulin ß), and followed the orientation given by the dECM scaffolds. After generating a lesion site on the cell-scaffold model, cell migration was observed and compared to reference poly-ε-caprolactone fiber scaffolds. The aligned dECM fiber scaffold promoted the fastest and most efficient lesion closure, indicating superior cell guiding capabilities of dECM-based scaffolds. The strategy of combining decellularized tissues with controlled deposition of fibers to optimize biochemical and topographical cues opens the way for clinically relevant central nervous system scaffolding solutions.
AUTHOR Cojocaru, Elena and Ghitman, Jana and Pircalabioru, Gratiela Gradisteanu and Zaharia, Anamaria and Iovu, Horia and Sarbu, Andrei
Title Electrospun/3D-Printed Bicomponent Scaffold Co-Loaded with a Prodrug and a Drug with Antibacterial and Immunomodulatory Properties [Abstract]
Year 2023
Journal/Proceedings Polymers
Reftype
DOI/URL URL DOI
Abstract
This work reports the construction of a bicomponent scaffold co-loaded with both a prodrug and a drug (BiFp@Ht) as an efficient platform for wound dressing, by combining the electrospinning and 3D-printing technologies. The outer component consisted of a chitosan/polyethylene oxide-electrospun membrane loaded with the indomethacin–polyethylene glycol–indomethacin prodrug (Fp) and served as a support for printing the inner component, a gelatin methacryloyl/sodium alginate hydrogel loaded with tetracycline hydrochloride (Ht). The different architectural characteristics of the electrospun and 3D-printed layers were very well highlighted in a morphological analysis performed by Scanning Electron Microscopy (SEM). In vitro release profile studies demonstrated that both Fp and Ht layers were capable to release the loaded therapeutics in a controlled and sustained manner. According to a quantitative in vitro biological assessment, the bicomponent BiFp@Ht scaffold showed a good biocompatibility and no cytotoxic effect on HeLa cell cultures, while the highest proliferation level was noted in the case of HeLa cells seeded onto an Fp nanofibrous membrane. Furthermore, the BiFp@Ht scaffold presented an excellent antimicrobial activity against the E. coli and S. aureus bacterial strains, along with promising anti-inflammatory and proangiogenic activities, proving its potential to be used for wound dressing.
AUTHOR Tan, Yadong and Fan, Shijie and Wu, Xiaoyu and Liu, Menggege and Dai, Ting and Liu, Chun and Ni, Su and Wang, Jiafeng and Yuan, Xiuchen and Zhao, Hongbin and Weng, Yiping
Title Fabrication of a three-dimensional printed gelatin/sodium alginate/nano-attapulgite composite polymer scaffold loaded with leonurine hydrochloride and its effects on osteogenesis and vascularization [Abstract]
Year 2023
Journal/Proceedings International Journal of Biological Macromolecules
Reftype
DOI/URL URL DOI
Abstract
Bone tissue engineering scaffolds have made significant progress in treating bone defects in recent decades. However, the lack of a vascular network within the scaffold limits bone formation after implantation in vivo. Recent research suggests that leonurine hydrochloride (LH) can promote healing in full-thickness cutaneous wounds by increasing vessel formation and collagen deposition. Gelatin and Sodium Alginate are both polymers. ATP is a magnesium silicate chain mineral. In this study, a Gelatin/Sodium Alginate/Nano-Attapulgite composite hydrogel was used as the base material first, and the Gelatin/Sodium Alginate/Nano-Attapulgite composite polymer scaffold loaded with LH was then created using 3D printing technology. Finally, LH was grafted onto the base material by an amide reaction to construct a scaffold loaded with LH to achieve long-term LH release. When compared to pure polymer scaffolds, in vitro results showed that LH-loaded scaffolds promoted the differentiation of BMSCs into osteoblasts, as evidenced by increased expression of osteogenic key genes. The results of in vivo tissue staining revealed that the drug-loaded scaffold promoted both angiogenesis and bone formation. Collectively, these findings suggest that LH-loaded Gelatin/Sodium Alginate/Nano-Attapulgite composite hydrogel scaffolds are a potential therapeutic strategy and can assist bone regeneration.
AUTHOR Gruhn, Thomas and Monsalve, Camilo Ortiz and Müller, Claudia and Heid, Susanne and Boccaccini, Aldo R. and Salehi, Sahar
Title Fabrication of Hydrogel-Based Composite Fibers and Computer Simulation of the Filler Dynamics in the Composite Flow [Abstract]
Year 2023
Journal/Proceedings Bioengineering
Reftype
DOI/URL URL DOI
Abstract
Fibrous structures with anisotropic fillers as composites have found increasing interest in the field of biofabrication since they can mimic the extracellular matrix of anisotropic tissues such as skeletal muscle or nerve tissue. In the present work, the inclusion of anisotropic fillers in hydrogel-based filaments with an interpenetrating polymeric network (IPN) was evaluated and the dynamics of such fillers in the composite flow were analyzed using computational simulations. In the experimental part, microfabricated rods (200 and 400 μm length, 50 μm width) were used as anisotropic fillers in extrusion of composite filaments using two techniques of wet spinning and 3D printing. Hydrogels such as oxidized alginate (ADA) and methacrylated gelatin (GelMA) were used as matrices. In the computational simulation, a combination of computational fluid dynamics and coarse-grained molecular dynamics was used to study the dynamics of rod-like fillers in the flow field of a syringe. It showed that, during the extrusion process, microrods are far from being well aligned. Instead, many of them tumble on their way through the needle leading to a random orientation in the fiber which was confirmed experimentally.
AUTHOR Wu, Qinghua and Zhang, Peikai and O'Leary, Gerard and Zhao, Yimu and Xu, Yinghao and Rafatian, Naimeh and Okhovatian, Sargol and Landau, Shira and Valiante, Taufik A. and Travas-Sejdic, Jadranka and Radisic, Milica
Title Flexible 3D printed microwires and 3D microelectrodes for heart-on-a-chip engineering [Abstract]
Year 2023
Journal/Proceedings Biofabrication
Reftype
DOI/URL DOI
Abstract
We developed a heart-on-a-chip platform that integrates highly flexible, vertical, 3D micropillar electrodes for electrophysiological recording and elastic microwires for the tissue’s contractile force assessment. The high aspect ratio microelectrodes were 3D-printed into the device using a conductive polymer, poly(3,4-ethylenedioxythiophene): poly(styrene sulfonate) (PEDOT:PSS). A pair of flexible, quantum dots/thermoplastic elastomer nanocomposite microwires were 3D printed to anchor the tissue and enable continuous contractile force assessment. The 3D microelectrodes and flexible microwires enabled unobstructed human iPSC-based cardiac tissue formation and contraction, suspended above the device surface, under both spontaneous beating and upon pacing with a separate set of integrated carbon electrodes. Recording of extracellular field potentials using the PEDOT:PSS micropillars was demonstrated with and without epinephrine as a model drug, non-invasively, along with in situ monitoring of tissue contractile properties and calcium transients. Uniquely, the platform provides integrated profiling of electrical and contractile tissue properties, which is critical for proper evaluation of complex, mechanically and electrically active tissues, such as the heart muscle under both physiological and pathological conditions.
AUTHOR Pereira, Inês and Lopez-Martinez, Maria J. and Villasante, Aranzazu and Introna, Clelia and Tornero, Daniel and Canals, Josep M. and Samitier, Josep
Title Hyaluronic acid-based bioink improves the differentiation and network formation of neural progenitor cells [Abstract]
Year 2023
Journal/Proceedings Frontiers in Bioengineering and Biotechnology
Reftype
DOI/URL DOI
Abstract
Introduction: Three-dimensional (3D) bioprinting is a promising technique for the development of neuronal in vitro models because it controls the deposition of materials and cells. Finding a biomaterial that supports neural differentiation in vitro while ensuring compatibility with the technique of 3D bioprinting of a self-standing construct is a challenge.Methods: In this study, gelatin methacryloyl (GelMA), methacrylated alginate (AlgMA), and hyaluronic acid (HA) were examined by exploiting their biocompatibility and tunable mechanical properties to resemble the extracellular matrix (ECM) and to create a suitable material for printing neural progenitor cells (NPCs), supporting their long-term differentiation. NPCs were printed and differentiated for up to 15 days, and cell viability and neuronal differentiation markers were assessed throughout the culture.Results and Discussion: This composite biomaterial presented the desired physical properties to mimic the ECM of the brain with high water intake, low stiffness, and slow degradation while allowing the printing of defined structures. The viability rates were maintained at approximately 80% at all time points. However, the levels of β-III tubulin marker increased over time, demonstrating the compatibility of this biomaterial with neuronal cell culture and differentiation. Furthermore, these cells showed increased maturation with corresponding functional properties, which was also demonstrated by the formation of a neuronal network that was observed by recording spontaneous activity via Ca2+ imaging.
AUTHOR Petretta, Mauro and Villata, Simona and Scozzaro, Marika Pia and Roseti, Livia and Favero, Marta and Napione, Lucia and Frascella, Francesca and Pirri, Candido Fabrizio and Grigolo, Brunella and Olivotto, Eleonora
Title In Vitro Synovial Membrane 3D Model Developed by Volumetric Extrusion Bioprinting [Abstract]
Year 2023
Journal/Proceedings Applied Sciences
Reftype
DOI/URL URL DOI
Abstract
(1) Background: Synovial tissue plays a fundamental role in inflammatory processes. Therefore, understanding the mechanisms regulating healthy and diseased synovium functions, as in rheumatic diseases, is crucial to discovering more effective therapies to minimize or prevent pathological progress. The present study aimed at developing a bioartificial synovial tissue as an in vitro model for drug screening or personalized medicine applications using 3D bioprinting technology. (2) Methods: The volumetric extrusion technique has been used to fabricate cell-laden scaffolds. Gelatin Methacryloyl (GelMA), widely applied in regenerative medicine and tissue engineering, was selected as a bioink and combined with an immortalized cell line of fibroblast-like synoviocytes (K4IM). (3) Results: Three different GelMA formulations, 7.5–10–12.5% w/v, were tested for the fabrication of the scaffold with the desired morphology and internal architecture. GelMA 10% w/v was chosen and combined with K4IM cells to fabricate scaffolds that showed high cell viability and negligible cytotoxicity for up to 14 days tested by Live & Dead and lactate dehydrogenase assays. (4) Conclusions: We successfully 3D bioprinted synoviocytes-laden scaffolds as a proof-of-concept (PoC) towards the fabrication of a 3D synovial membrane model suitable for in vitro studies. However, further research is needed to reproduce the complexity of the synovial microenvironment to better mimic the physiological condition.
AUTHOR Kaneda, Giselle and Chan, Julie L. and Castaneda, Chloe M. and Papalamprou, Angela and Sheyn, Julia and Shelest, Oksana and Huang, Dave and Kluser, Nadine and Yu, Victoria and Ignacio, Gian C. and Gertych, Arkadiusz and Yoshida, Ryu and Metzger, Melodie and Tawackoli, Wafa and Vernengo, Andrea and Sheyn, Dmitriy
Title iPSC-derived tenocytes seeded on microgrooved 3D printed scaffolds for Achilles Tendon Regeneration [Abstract]
Year 2023
Journal/Proceedings Journal of Orthopaedic Research
Reftype
DOI/URL DOI
Abstract
AbstractTendons and ligaments have a poor innate healing capacity, yet account for 50% of musculoskeletal injuries in the US. Full structure and function restoration post-injury remains an unmet clinical need. This study aimed to assess the application of novel 3D printed scaffolds and induced pluripotent stem cell-derived mesenchymal stem cells (iMSCs) overexpressing the transcription factor Scleraxis (SCX, iMSCSCX+) as a new strategy for tendon defect repair. The polycaprolactone (PCL) scaffolds were fabricated by extrusion through a patterned nozzle or conventional round nozzle. Scaffolds were seeded with iMSCSCX+ and outcomes were assessed in vitro via gene expression analysis and immunofluorescence. In vivo, rat Achilles tendon defects were repaired with iMSCSCX+-seeded microgrooved scaffolds, microgrooved scaffolds only, or suture only and assessed via gait, gene expression, biomechanical testing, histology, and immunofluorescence.iMSCSCX+-seeded on microgrooved scaffolds showed upregulation of tendon markers and increased organization and linearity of cells compared to non-patterned scaffolds in vitro. In vivo gait analysis showed improvement in the Scaffold+iMSCSCX+-treated group compared to the controls. Tensile testing of the tendons demonstrated improved biomechanical properties of the Scaffold+iMSCSCX+ group compared to the controls. Histology and immunofluorescence demonstrated more regular tissue formation in the Scaffold+iMSCSCX+ group.This article is protected by copyright. All rights reserved.
AUTHOR Ege, Duygu and Hasirci, Vasif
Title Is 3D Printing Promising for Osteochondral Tissue Regeneration? [Abstract]
Year 2023
Journal/Proceedings ACS Appl. Bio Mater.
Reftype
DOI/URL DOI
Abstract
Osteochondral tissue regeneration is quite difficult to achieve due to the complexity of its organization. In the design of these complex multilayer structures, a fabrication method, 3D printing, started to be employed, especially by using extrusion, stereolithography and inkjet printing approaches. In this paper, the designs are discussed including biphasic, triphasic, and gradient structures which aim to mimic the cartilage and the calcified cartilage and the whole osteochondral tissue closely. In the first section of the review paper, 3D printing of hydrogels including gelatin methacryloyl (GelMa), alginate, and polyethylene glycol diacrylate (PEGDA) are discussed. However, their physical and biological properties need to be augmented, and this generally is achieved by blending the hydrogel with other, more durable, less hydrophilic, polymers. These scaffolds are very suitable to carry growth factors, such as TGF-β1, to further stimulate chondrogenesis. The bone layer is mimicked by printing calcium phosphates (CaPs) or bioactive glasses together with the hydrogels or as a component of another polymer layer. The current research findings indicate that polyester (i.e. polycaprolactone (PCL), polylactic acid (PLA) and poly(lactide-co-glycolide) (PLGA)) reinforced hydrogels may more successfully mimic the complex structure of osteochondral tissue. Moreover, more recent printing methods such as melt electrowriting (MEW), are being used to integrate polyester fibers to enhance the mechanical properties of hydrogels. Additionally, polyester scaffolds that are 3D printed without hydrogels are discussed after the hydrogel-based scaffolds. In this review paper, the relevant studies are analyzed and discussed, and future work is recommended with support of tables of designed scaffolds. The outcome of the survey of the field is that 3D printing has significant potential to contribute to osteochondral tissue repair.
AUTHOR Mamidi, Narsimha and Ijadi, Fatemeh and Norahan, Mohammad Hadi
Title Leveraging the Recent Advancements in GelMA Scaffolds for Bone Tissue Engineering: An Assessment of Challenges and Opportunities [Abstract]
Year 2023
Journal/Proceedings Biomacromolecules
Reftype
DOI/URL DOI
Abstract
The field of bone tissue engineering has seen significant advancements in recent years. Each year, over two million bone transplants are performed globally, and conventional treatments, such as bone grafts and metallic implants, have their limitations. Tissue engineering offers a new level of treatment, allowing for the creation of living tissue within a biomaterial framework. Recent advances in biomaterials have provided innovative approaches to rebuilding bone tissue function after damage. Among them, gelatin methacryloyl (GelMA) hydrogel is emerging as a promising biomaterial for supporting cell proliferation and tissue regeneration, and GelMA has exhibited exceptional physicochemical and biological properties, making it a viable option for clinical translation. Various methods and classes of additives have been used in the application of GelMA for bone regeneration, with the incorporation of nanofillers or other polymers enhancing its resilience and functional performance. Despite promising results, the fabrication of complex structures that mimic the bone architecture and the provision of balanced physical properties for both cell and vasculature growth and proper stiffness for load bearing remain as challenges. In terms of utilizing osteogenic additives, the priority should be on versatile components that promote angiogenesis and osteogenesis while reinforcing the structure for bone tissue engineering applications. This review focuses on recent efforts and advantages of GelMA-based composite biomaterials for bone tissue engineering, covering the literature from the last five years.
AUTHOR Moo, Eng Kuan and Ebrahimi, Mohammadhossein and Hrynevich, Andrei and de Ruijter, Mylène and Castilho, Miguel and Malda, Jos and Korhonen, Rami K.
Title Load-induced fluid pressurisation in hydrogel systems before and after reinforcement by melt-electrowritten fibrous meshes [Abstract]
Year 2023
Journal/Proceedings Journal of the Mechanical Behavior of Biomedical Materials
Reftype
DOI/URL URL DOI
Abstract
Fluid pressure develops transiently within mechanically-loaded, cell-embedding hydrogels, but its magnitude depends on the intrinsic material properties of the hydrogel and cannot be easily altered. The recently developed melt-electrowriting (MEW) technique enables three-dimensional printing of structured fibrous mesh with small fibre diameter (20 μm). The MEW mesh with 20 μm fibre diameter can synergistically increase the instantaneous mechanical stiffness of soft hydrogels. However, the reinforcing mechanism of the MEW meshes is not well understood, and may involve load-induced fluid pressurisation. Here, we examined the reinforcing effect of MEW meshes in three hydrogels: gelatin methcryloyl (GelMA), agarose and alginate, and the role of load-induced fluid pressurisation in the MEW reinforcement. We tested the hydrogels with and without MEW mesh (i.e., hydrogel alone, and MEW-hydrogel composite) using micro-indentation and unconfined compression, and analysed the mechanical data using biphasic Hertz and mixture models. We found that the MEW mesh altered the tension-to-compression modulus ratio differently for hydrogels that are cross-linked differently, which led to a variable change to their load-induced fluid pressurisation. MEW meshes only enhanced the fluid pressurisation for GelMA, but not for agarose or alginate. We speculate that only covalently cross-linked hydrogels (GelMA) can effectively tense the MEW meshes, thereby enhancing the fluid pressure developed during compressive loading. In conclusion, load-induced fluid pressurisation in selected hydrogels was enhanced by MEW fibrous mesh, and may be controlled by MEW mesh of different designs in the future, thereby making fluid pressure a tunable cell growth stimulus for tissue engineering involving mechanical stimulation.
AUTHOR Sun, Jie and Yao, Kai and An, Jia and Jing, Linzhi and Huang, Kaizhu and Huang, Dejian
Title Machine learning and 3D bioprinting [Abstract]
Year 2023
Journal/Proceedings International Journal of Bioprinting; Online FirstDO - 10.18063/ijb.717
Reftype
DOI/URL URL
Abstract
With the growing number of biomaterials and printing technologies, bioprinting has brought about tremendous potential to fabricate biomimetic architectures or living tissue constructs. To make bioprinting and bioprinted constructs more powerful, machine learning (ML) is introduced to optimize the relevant processes, applied materials, and mechanical/biological performances. The objectives of this work were to collate, analyze, categorize, and summarize published articles and papers pertaining to ML applications in bioprinting and their impact on bioprinted constructs, as well as the directions of potential development. From the available references, both traditional ML and deep learning (DL) have been applied to optimize the printing process, structural parameters, material properties, and biological/ mechanical performance of bioprinted constructs. The former uses features extracted from image or numerical data as inputs in prediction model building, and the latter uses the image directly for segmentation or classification model building. All of these studies present advanced bioprinting with a stable and reliable printing process, desirable fiber/droplet diameter, and precise layer stacking, and also enhance the bioprinted constructs with better design and cell performance. The current challenges and outlooks in developing process-material-performance models are highlighted, which may pave the way for revolutionizing bioprinting technologies and bioprinted construct design.
AUTHOR Marin, Maria Minodora and Gifu, Ioana Catalina and Pircalabioru, Gratiela Gradisteanu and Albu Kaya, Madalina and Constantinescu, Rodica Roxana and Alexa, Rebeca Leu and Trica, Bogdan and Alexandrescu, Elvira and Nistor, Cristina Lavinia and Petcu, Cristian and Ianchis, Raluca
Title Microbial Polysaccharide-Based Formulation with Silica Nanoparticles; A New Hydrogel Nanocomposite for 3D Printing [Abstract]
Year 2023
Journal/Proceedings Gels
Reftype
DOI/URL URL DOI
Abstract
Natural polysaccharides are highly attractive biopolymers recommended for medical applications due to their low cytotoxicity and hydrophilicity. Polysaccharides and their derivatives are also suitable for additive manufacturing, a process in which various customized geometries of 3D structures/scaffolds can be achieved. Polysaccharide-based hydrogel materials are widely used in 3D hydrogel printing of tissue substitutes. In this context, our goal was to obtain printable hydrogel nanocomposites by adding silica nanoparticles to a microbial polysaccharide’s polymer network. Several amounts of silica nanoparticles were added to the biopolymer, and their effects on the morpho-structural characteristics of the resulting nanocomposite hydrogel inks and subsequent 3D printed constructs were studied. FTIR, TGA, and microscopy analysis were used to investigate the resulting crosslinked structures. Assessment of the swelling characteristics and mechanical stability of the nanocomposite materials in a wet state was also conducted. The salecan-based hydrogels displayed excellent biocompatibility and could be employed for biomedical purposes, according to the results of the MTT, LDH, and Live/Dead tests. The innovative, crosslinked, nanocomposite materials are recommended for use in regenerative medicine.
AUTHOR Ianchis, Raluca and Marin, Maria Minodora and Alexa, Rebeca Leu and Gifu, Ioana Catalina and Alexandrescu, Elvira and Pircalabioru, Gratiela Gradisteanu and Vlasceanu, George Mihail and Teodorescu, George Mihail and Serafim, Andrada and Preda, Silviu and Nistor, Cristina Lavinia and Petcu, Cristian
Title Nanoclay-reinforced alginate/salecan composite inks for 3D printing applications
Year 2023
Journal/Proceedings IJB
Reftype
DOI/URL DOI
AUTHOR Ianchis, Raluca and Alexa, Rebeca Leu and Gifu, Ioana Catalina and Marin, Maria Minodora and Alexandrescu, Elvira and Constantinescu, Roxana and Serafim, Andrada and Nistor, Cristina Lavinia and Petcu, Cristian
Title Novel Green Crosslinked Salecan Hydrogels and Preliminary Investigation of Their Use in 3D Printing [Abstract]
Year 2023
Journal/Proceedings Pharmaceutics
Reftype
DOI/URL URL DOI
Abstract
Salecan, a kind of polysaccharide, is produced by the Agrobacterium ZX09 salt tolerant strain. In this study, green crosslinked citric acid-salecan hydrogels are explored as novel materials with a high potential for use in regenerative medicine. The impact of salecan and citric acid on the final crosslinked hydrogels was intensively studied and estimated in terms of the whole physicochemical properties and antimicrobial activity. FTIR spectra demonstrated the successful green crosslinking of salecan through its esterification with citric acid where the formation of strong covalent bonds collaboratively helped to stabilize the entire hydrogel systems in a wet state. Hydrogels presented a microporous morphology, good swelling capacity, pH responsiveness, great mechanical stability under stress conditions and good antibacterial activity, all related to the concentration of the biopolymers used in the synthesis step. Additionally, salecan hydrogels were preliminary investigated as printing inks. Thanks to their excellent rheological behavior, we optimized the citrate-salecan hydrogel inks and printing parameters to render 3D constructs with great printing fidelity and integrity. The novel synthesized salecan green crosslinked hydrogels enriches the family of salecan-derived hydrogels. Moreover, this work not only expands the application of salecan hydrogels in various fields, but also provides a new potential option of designing salecan-based 3D printed scaffolds for customized regenerative medicine.
AUTHOR Sabzevari, Alireza and Rayat Pisheh, Hossein and Ansari, Mojtaba and Salati, Amir
Title Progress in bioprinting technology for tissue regeneration [Abstract]
Year 2023
Journal/Proceedings Journal of Artificial Organs
Reftype Sabzevari2023
DOI/URL DOI
Abstract
In recent years, due to the increase in diseases that require organ/tissue transplantation and the limited donor, on the other hand, patients have lost hope of recovery and organ transplantation. Regenerative medicine is one of the new sciences that promises a bright future for these patients by providing solutions to repair, improve function, and replace tissue. One of the technologies used in regenerative medicine is three-dimensional (3D) bioprinters. Bioprinting is a new strategy that is the basis for starting a global revolution in the field of medical sciences and has attracted much attention. 3D bioprinters use a combination of advanced biology and cell science, computer science, and materials science to create complex bio-hybrid structures for various applications. The capacity to use this technology can be demonstrated in regenerative medicine to make various connective tissues, such as skin, cartilage, and bone. One of the essential parts of a 3D bioprinter is the bio-ink. Bio-ink is a combination of biologically active molecules, cells, and biomaterials that make the printed product. In this review, we examine the main bioprinting strategies, such as inkjet printing, laser, and extrusion-based bioprinting, as well as some of their applications.
AUTHOR Sunildutt, Naina and Parihar, Pratibha and Chethikkattuveli Salih, Abdul Rahim and Lee, Sang Ho and Choi, Kyung Hyun
Title Revolutionizing drug development: harnessing the potential of organ-on-chip technology for disease modeling and drug discovery [Abstract]
Year 2023
Journal/Proceedings Frontiers in Pharmacology
Reftype
DOI/URL DOI
Abstract
The inefficiency of existing animal models to precisely predict human pharmacological effects is the root reason for drug development failure. Microphysiological system/organ-on-a-chip technology (organ-on-a-chip platform) is a microfluidic device cultured with human living cells under specific organ shear stress which can faithfully replicate human organ-body level pathophysiology. This emerging organ-on-chip platform can be a remarkable alternative for animal models with a broad range of purposes in drug testing and precision medicine. Here, we review the parameters employed in using organ on chip platform as a plot mimic diseases, genetic disorders, drug toxicity effects in different organs, biomarker identification, and drug discoveries. Additionally, we address the current challenges of the organ-on-chip platform that should be overcome to be accepted by drug regulatory agencies and pharmaceutical industries. Moreover, we highlight the future direction of the organ-on-chip platform parameters for enhancing and accelerating drug discoveries and personalized medicine.
AUTHOR Katcharava, Zviadi and Zhou, Xiaozhuang and Bhandary, Rajesh and Sattler, Rene and Huth, Heiko and Beiner, Mario and Marinow, Anja and Binder, Wolfgang H.
Title Solvent and catalyst free vitrimeric poly(ionic liquid) electrolytes [Abstract]
Year 2023
Journal/Proceedings RSC Adv.
Reftype
DOI/URL DOI
Abstract
Polymer electrolytes (PEs) are a promising alternative to overcome shortcomings of conventional lithium ion batteries (LiBs) and make them safer for users. Introduction of self-healing features in PEs additionally leads to prolonged life-time of LIBs{,} thus tackling cost and environmental issues. We here present solvent free{,} self-healable{,} reprocessable{,} thermally stable{,} conductive poly(ionic liquid) (PIL) consisting of pyrrolidinium-based repeating units. PEO-functionalized styrene was used as a co-monomer for improving mechanical properties and introducing pendant OH groups in the polymer backbone to act as a transient crosslinking site for boric acid{,} leading to the formation of dynamic boronic ester bonds{,} thus forming a vitrimeric material. Dynamic boronic ester linkages allow reprocessing (at 40 °C){,} reshaping and self-healing ability of PEs. A series of vitrimeric PILs by varying both monomers ratio and lithium salt (LiTFSI) content was synthesized and characterized. The conductivity reached 10−5 S cm−1 at 50 °C in the optimized composition. Moreover{,} the PILs rheological properties fit the required melt flow behavior (above 120 °C) for 3D printing via fused deposition modeling (FDM){,} offering the possibility to design batteries with more complex and diverse architectures.
AUTHOR Chen, Shangsi and Wang, Yue and Lai, Jiahui and Tan, Shenglong and Wang, Min
Title Structure and Properties of Gelatin Methacryloyl (GelMA) Synthesized in Different Reaction Systems [Abstract]
Year 2023
Journal/Proceedings Biomacromolecules
Reftype
DOI/URL DOI
Abstract
Gelatin methacryloyl (GelMA) hydrogels have been extensively used for drug delivery and tissue engineering applications due to their good biocompatibility, biodegradability, and controllable photocurable efficiency. Phosphate buffer solution (PBS) is the most widely used reaction system for GelMA synthesis. However, carbonate-bicarbonate buffer solution (CBS) has been tried recently for synthesizing GelMA due to its high reaction efficiency. However, there is a lack of systematic investigation into possible differences in the structure and properties of GelMA synthesized in PBS and CBS, respectively. Therefore, in the current study, GelMA molecules with two degrees of methacryloylation (∼20 and ∼80%) were synthesized under PBS and CBS reaction systems, respectively, in comparable conditions. The results showed that because of the functionalization of methacrylate groups in gelatin chains, which could interfere with the intrachain and interchain interactions, such as hydrogen bonding, the GelMA molecules synthesized in PBS had distinct physical structures and exhibited different properties in comparison with those produced in CBS. GelMA hydrogels synthesized in PBS exhibited higher gel-sol transition temperatures and better photocurable efficiencies, mechanical strength, and biological properties. In contrast, GelMA hydrogels produced in CBS showed advantages in swelling performance and microstructures, such as pore sizes and porosities. In addition, GelMA synthesized in PBS and possessing a high degree of methacryloylation (the “GelMA-PH” polymer) showed great potential for three-dimensional (3D) bioprinting. This focused study has gained helpful new insights into GelMA and can provide guidance on the application of GelMA in 3D printing and tissue engineering.
AUTHOR Pan, Yiwen and Chen, Shaoqing and Meng, Yanyan and He, Mu and Liu, Chun and Wang, Cheli and Ni, Xinye
Title Study on 3D-Printed Emodin/Nano-Hydroxyapatite Scaffolds Promoting Bone Regeneration by Supporting Osteoblast Proliferation and Macrophage M2 Polarization [Abstract]
Year 2023
Journal/Proceedings ACS Appl. Polym. Mater.
Reftype
DOI/URL DOI
Abstract
The treatment of bone defects caused by diseases, trauma, or tumor has always been a great clinical challenge. Implantation of bone biomaterials into bone defect areas is an effective method for bone injury repair. In this study, we used three-dimensional (3D) printing technology to prepare nano-hydroxyapatite (nHA)/sodium alginate (SA)/gelatin (Gel) hydrogel scaffolds loaded with different ratios (0, 0.13, 0.26, 0.39, 0.53, and 0.79‰) of emodin (EM) (EM/nHA/SA/Gel). Scanning electron microscopy showed that the scaffolds had a smooth surface without fracture and nHA was evenly distributed on the surface. The cell proliferation and migration results showed that the 0.39‰ EM group, in particular, could significantly promote the proliferation and migration of mouse embryonic osteoblast precursor (MC3T3-E1) cells and significantly increase the mRNA expression of osteogenic differentiation-related genes (bone morphogenetic protein/BMP-2, BMP-9, osteocalcin). In addition, the 0.39‰ EM group exhibited the best effect on osteogenic differentiation-related proteins (alkaline phosphatase, Runx 2, OSX). The expression of M2 polarization-related genes (arginase-1, CD206) also significantly increased after the treatment with the 0.39‰ EM group. Micro-CT showed that in the rat skull defect model, the EM/nHA/SA/Gel scaffold group significantly promoted bone regeneration after being implanted into the skull for 30 days. Our results indicate that the EM/nHA/SA/Gel hydrogel scaffolds can not only directly promote the proliferation and differentiation of osteoblasts but also indirectly promote osteogenic differentiation by supporting M2 polarization of macrophages. EM/nHA/SA/Gel hydrogel scaffolds are potential bone tissue engineering materials for bone regeneration.
AUTHOR Kopecká, Kateřina and Vítková, Lenka and Kroneková, Zuzana and Musilová, Lenka and Smolka, Petr and Mikulka, Filip and Melánová, Klára and Knotek, Petr and Humeník, Martin and Minařík, Antonín and Mráček, Aleš
Title Synthesis and Exfoliation of Calcium Organophosphonates for Tailoring Rheological Properties of Sodium Alginate Solutions: A Path toward Polysaccharide-Based Bioink [Abstract]
Year 2023
Journal/Proceedings Biomacromolecules
Reftype
DOI/URL DOI
Abstract
Layered nanoparticles with surface charge are explored as rheological modifiers for extrudable materials, utilizing their ability to induce electrostatic repulsion and create a house-of-cards structure. These nanoparticles provide mechanical support to the polymer matrix, resulting in increased viscosity and storage modulus. Moreover, their advantageous aspect ratio allows for shear-induced orientation and decreased viscosity during flow. In this work, we present a synthesis and liquid-based exfoliation procedure of phenylphosphonate-phosphate particles with enhanced ability to be intercalated by hydrophilic polymers. These layered nanoparticles are then tested as rheological modifiers of sodium alginate. The effective rheological modification is proved as the viscosity increases from 101 up to 103 Pa·s in steady state. Also, shear-thinning behavior is observed. The resulting nanocomposite hydrogels show potential as an extrudable bioink for 3D printing in tissue engineering and other biomedical applications, with good shape fidelity, nontoxicity, and satisfactory cell viability confirmed through encapsulation and printing of mouse fibroblasts.
AUTHOR Cai, Runxuan and Gimenez-Camino, Naroa and Xiao, Ming and Bi, Shuguang and DiVito, Kyle A.
Title Technological advances in three-dimensional skin tissue engineering
Year 2023
Journal/Proceedings REVIEWS ON ADVANCED MATERIALS SCIENCE
Reftype
DOI/URL DOI
AUTHOR Yu, Qingtong and Wang, Qilong and Zhang, Linzhi and Deng, Wenwen and Cao, Xia and Wang, Zhe and Sun, Xuan and Yu, Jiangnan and Xu, Ximing
Title The applications of 3D printing in wound healing: The external delivery of stem cells and antibiosis [Abstract]
Year 2023
Journal/Proceedings Advanced Drug Delivery Reviews
Reftype
DOI/URL URL DOI
Abstract
As the global number of chronic wound patients rises, the financial burden and social pressure on patients increase daily. Stem cells have emerged as promising tissue engineering seed cells due to their enriched sources, multidirectional differentiation ability, and high proliferation rate. However, delivering them in vitro for the treatment of skin injury is still challenging. In addition, bacteria from the wound site and the environment can significantly impact wound healing. In the last decade, 3D bioprinting has dramatically enriched cell delivery systems. The produced scaffolds by this technique can be precisely localized within cells and perform antibacterial actions. In this review, we summarized the 3D bioprinting-based external delivery of stem cells and their antibiosis to improve wound healing.
AUTHOR Züger, Fabian and Berner, Natascha and Gullo, Maurizio R.
Title Towards a Novel Cost-Effective and Versatile Bioink for 3D-Bioprinting in Tissue Engineering [Abstract]
Year 2023
Journal/Proceedings Biomimetics
Reftype
DOI/URL URL DOI
Abstract
3D-bioprinting for tissue regeneration relies on, among other things, hydrogels with favorable rheological properties. These include shear thinning for cell-friendly extrusion, post-printing structural stability as well as physiologically relevant elastic moduli needed for optimal cell attachment, proliferation, differentiation and tissue maturation. This work introduces a cost-efficient gelatin-methylcellulose based hydrogel whose rheological properties can be independently optimized for optimal printability and tissue engineering. Hydrogel viscosities were designed to present three different temperature regimes: low viscosity for eased cell suspension and printing with minimal shear stress, form fidelity directly after printing and long term structural stability during incubation. Enzymatically crosslinked hydrogel scaffolds with stiffnesses ranging from 5 to 50 kPa were produced, enabling the hydrogel to biomimic cell environments for different types of tissues. The bioink showed high intrinsic cytocompatibility and tissues fabricated by embedding and bioprinting NIH 3T3 fibroblasts showed satisfactory viability. This novel hydrogel uses robust and inexpensive technology, which can be adjusted for implementation in tissue regeneration, e.g., in myocardial or neural tissue engineering.
AUTHOR Radeke, Carmen and Pons, Raphaël and Mihajlovic, Marko and Knudsen, Jonas R. and Butdayev, Sarkhan and Kempen, Paul J. and Segeritz, Charis-Patricia and Andresen, Thomas L. and Pehmøller, Christian K. and Jensen, Thomas E. and Lind, Johan U.
Title Transparent and Cell-Guiding Cellulose Nanofiber 3D Printing Bioinks [Abstract]
Year 2023
Journal/Proceedings ACS Appl. Mater. Interfaces
Reftype
DOI/URL DOI
Abstract
For three-dimensional (3D) bioprinting to fulfill its promise and enable the automated fabrication of complex tissue-mimicking constructs, there is a need for developing bioinks that are not only printable and biocompatible but also have integrated cell-instructive properties. Toward this goal, we here present a scalable technique for generating nanofiber 3D printing inks with unique tissue-guiding capabilities. Our core methodology relies on tailoring the size and dispersibility of cellulose fibrils through a solvent-controlled partial carboxymethylation. This way, we generate partially negatively charged cellulose nanofibers with diameters of ∼250 nm and lengths spanning tens to hundreds of microns. In this range, the fibers structurally match the size and dimensions of natural collagen fibers making them sufficiently large to orient cells. Yet, they are simultaneously sufficiently thin to be optically transparent. By adjusting fiber concentration, 3D printing inks with excellent shear-thinning properties can be established. In addition, as the fibers are readily dispersible, composite inks with both carbohydrates and extracellular matrix (ECM)-derived proteins can easily be generated. We apply such composite inks for 3D printing cell-laden and cross-linkable structures, as well as tissue-guiding gel substrates. Interestingly, we find that the spatial organization of engineered tissues can be defined by the shear-induced alignment of fibers during the printing procedure. Specifically, we show how myotubes derived from human and murine skeletal myoblasts can be programmed into linear and complex nonlinear architectures on soft printed substrates with intermediate fiber contents. Our nanofibrillated cellulose inks can thus serve as a simple and scalable tool for engineering anisotropic human muscle tissues that mimic native structure and function.
AUTHOR Zhang, Yubei and Raza, Ali and Xue, Ya-Qi and Yang, Ganggang and Hayat, Uzma and Yu, Jingwen and Liu, Chang and Wang, Hua-Jie and Wang, Jin-Ye
Title Water-responsive 4D printing based on self-assembly of hydrophobic protein “Zein” for the control of degradation rate and drug release [Abstract]
Year 2023
Journal/Proceedings Bioactive Materials
Reftype
DOI/URL URL DOI
Abstract
Four-dimensional (4D) printing is a promising technology that provides solutions for compelling needs in various fields. Most of the reported 4D printed systems are based on the temporal shape transformation of printed subjects. Induction of temporal heterogenicity in functions in addition to shape may extend the scope of 4D printing. Herein, we report a 4D printing approach using plant protein (zein) gel inspired by the amyloid fibrils formation mechanism. The printing of zein gel in a specialized layered-Carbopol supporting bath with different water concentrations in an ethanol-water mixture modulates hydrophobic and hydrogen bonding that causes temporal changes in functions. The part of the construct printed in a supporting bath with higher water content exhibits higher drug loading, faster drug release and degradation than those printed in the supporting bath with lower water content. Tri-segment conduit and butterfly-shaped construct with two asymmetrical wings are printed using this system to evaluate biomedical function as nerve conduit and drug delivery system. 4D printed conduits are also effective as a drug-eluting urethral stent in the porcine model. Overall, this study extends the concept of 4D printing beyond shape transformation and presents an approach of fabricating specialized baths for 4D printing that can also be extended to other materials to obtain 4D printed medical devices with translational potential.
AUTHOR Xue, Ya-Qi and Zhang, Yu-Cheng and Zhang, Yu-Bei and Wang, Jin-Ye
Title Zein-based 3D tubular constructs with tunable porosity for 3D cell culture and drug delivery [Abstract]
Year 2023
Journal/Proceedings Biomedical Engineering Advances
Reftype
DOI/URL URL DOI
Abstract
Manufacturing tubular constructs with tunable porosity can mimic the vascular structure, not only for supplying nutrients and removing metabolites to support long-term 3D cell culture but also for delivering bioactive components and drugs to tissues. There are few reports on the second purpose through 3D printing. In this study, bio-inspired tubular constructs with permeability were achieved using zein-based ink, forming structures with tunable porosity via the 3D printing technique. The parameters, e.g., zein content, with/without the addition of porogen, and drying conditions, were optimized to control the porous structure and porosity of the printed tubes. The inner wall of the resultant tube supported the adhesion of endothelial cells. A perfusion system was designed, and the penetrability of zein-based tubular constructs was demonstrated by the dialysis test. Moreover, perfusion of cell culture media and the anti-cancer drug in cell-laden hydrogels with tubular structure resulted in 3-day of 3D cell culture with a higher survival rate, and the drug was delivered to local cells around the tubular constructs, respectively. This is a new report on the preparation of 3D-printed tubular constructs using zein as the biomaterial inks with tunable porosity and porous structure, providing a general system for 3D cell culture, 3D drugs screening/pharmacokinetics in vitro, and tissue engineering.
AUTHOR Solis, Daphene Marques and Czekanski, Aleksander
Title 3D and 4D additive manufacturing techniques for vascular-like structures – A review [Abstract]
Year 2022
Journal/Proceedings Bioprinting
Reftype
DOI/URL URL DOI
Abstract
The critical shortage in organ donors is a problem facing patients and health care systems worldwide. The most promising solution to this crisis is the artificial production of organs and tissues, known as tissue engineering. Significant advances in this field have led to the commercial production of artificial skin and cartilage, but limitations remain in the production of thicker tissues (i.e., >200 μm thickness). The challenge of producing thicker tissues relates to the inability to establish and maintain a vascular system, which is the basic requirement for artificially producing any vital organ. Given the importance of these structures, a major scientific effort is underway to better understand how to reproduce a vascular system. This review presents the most recent advances in the manufacturing of vascular-like structures, especially techniques involving additive manufacturing, or 3D and 4D printing. This review starts with a primer on the classification, composition, and mechanical proprieties of blood vessels, offering the reader a better understanding of the challenges involved in the artificial production of vessels. The review then discusses the methodologies, technologies, and materials used and available for the manufacturing of the vascular system.
AUTHOR Khan, Zeashan and Siddique, Afifa
Title 3D Bioprinting and Organ Transplantation: Patient Dream or Ethical Nightmare?
Year 2022
Journal/Proceedings Journal of Ethics and Emerging Technologies
Reftype
DOI/URL URL DOI
AUTHOR Pitacco, Pierluca and Sadowska, Joanna M. and O'Brien, Fergal J. and Kelly, Daniel J.
Title 3D bioprinting of cartilaginous templates for large bone defect healing [Abstract]
Year 2022
Journal/Proceedings Acta Biomaterialia
Reftype
DOI/URL URL DOI
Abstract
Damaged or diseased bone can be treated using autografts or a range of different bone grafting biomaterials, however limitations with such approaches has motivated increased interest in developmentally inspired bone tissue engineering (BTE) strategies that seek to recapitulate the process of endochondral ossification (EO) as a means of regenerating critically sized defects. The clinical translation of such strategies will require the engineering of scaled-up, geometrically defined hypertrophic cartilage grafts that can be rapidly vascularised and remodelled into bone in mechanically challenging defect environments. The goal of this study was to 3D bioprint mechanically reinforced cartilaginous templates and to assess their capacity to regenerate critically sized femoral bone defects. Human mesenchymal stem/stromal cells (hMSCs) were incorporated into fibrin based bioinks and bioprinted into polycaprolactone (PCL) frameworks to produce mechanically reinforced constructs. Chondrogenic priming of such hMSC laden constructs was required to support robust vascularisation and graft mineralisation in vivo following their subcutaneous implantation into nude mice. With a view towards maximising their potential to support endochondral bone regeneration, we next explored different in vitro culture regimes to produce chondrogenic and early hypertrophic engineered grafts. Following their implantation into femoral bone defects within transiently immunosuppressed rats, such bioprinted constructs were rapidly remodelled into bone in vivo, with early hypertrophic constructs supporting higher levels of vascularisation and bone formation compared to the chondrogenic constructs. Such early hypertrophic bioprinted constructs also supported higher levels of vascularisation and spatially distinct patterns of new formation compared to BMP-2 loaded collagen scaffolds (here used as a positive control). In conclusion, this study demonstrates that fibrin based bioinks support chondrogenesis of hMSCs in vitro, which enables the bioprinting of mechanically reinforced hypertrophic cartilaginous templates capable of supporting large bone defect regeneration. These results support the use of 3D bioprinting as a strategy to scale-up the engineering of developmentally inspired templates for BTE. Statement of significance Despite the promise of developmentally inspired tissue engineering strategies for bone regeneration, there are still challenges that need to be addressed to enable clinical translation. This work reports the development and assessment (in vitro and in vivo) of a 3D bioprinting strategy to engineer mechanically-reinforced cartilaginous templates for large bone defect regeneration using human MSCs. Using distinct in vitro priming protocols, it was possible to generate cartilage grafts with altered phenotypes. More hypertrophic grafts, engineered in vitro using TGF-β3 and BMP-2, supported higher levels of blood vessel infiltration and accelerated bone regeneration in vivo. This study also identifies some of the advantages and disadvantages of such endochondral bone TE strategies over the direct delivery of BMP-2 from collagen-based scaffolds.
AUTHOR Govindharaj, Mano and Hashimi, Noura Al and Soman, Soja Saghar and Kanwar, Susheem and Vijayavenkataraman, Sanjairaj
Title 3D Bioprinting of human Mesenchymal Stem Cells in a novel tunic decellularized ECM bioink for Cartilage Tissue Engineering [Abstract]
Year 2022
Journal/Proceedings Materialia
Reftype
DOI/URL URL DOI
Abstract
Tunicates are marine organisms renowned for their thick, leathery exoskeleton called tunic. This tunic is composed of an extracellular matrix packed with protein-cellulose complexes and sulfated polysaccharides, making it a charming biomaterial choice for cartilage tissue engineering. In this study, P.nigra tunicate was collected and processed to obtain its rich decellularized extracellular matrix (dECM). The dECM was either seeded with human mesenchymal stem cells (hMSCs) as is or underwent further processing to form a hydrogel for 3D bioprinting. The characterization of tunic dECM was achieved by FTIR, XRD, TGA, Raman spectroscopy, SEM and tensile mechanical analysis. Biological compatibility and staining were done by live/dead, alamar blue, alcian blue, safranin O and PCR gene expression. After decellularization, the tunic dECM scaffold preserved the natural honeycomb-shaped microstructure, as well as its functional cellulose and protein groups. Both the tunic dECM scaffolds and bioprinted scaffolds showed enhanced metabolic activity, cell proliferation and chondrogenic differentiation. Combining both the mechanical robustness and biocompatibility, the bioink is able to fill the elusive gap in cartilage regeneration. This study offers a new potential source of dECM scaffolds and bioinks which are both biologically compatible and mechanically stable, making it a one stop shop for cartilage tissue engineering.
AUTHOR Bartolo, Paulo and Malshe, Ajay and Ferraris, Eleonora and Koc, Bahattin
Title 3D bioprinting: Materials, processes, and applications [Abstract]
Year 2022
Journal/Proceedings CIRP Annals
Reftype
DOI/URL URL DOI
Abstract
Ageing population and new diseases are requiring the development of novel therapeutical strategies. 3D bioprinting an novel application domain of additive manufacturing emerged as a potential transformative strategy for tissue engineering and regenerative medicine. This paper introduces the concept of 3D bioprinting, discussing in detail key requirements of bio-inks and main materials used to encapsulate cells. Recent advances related to the use of smart materials and the concept of 4D printing is also discussed. Main 3D bioprinting techniques are described in detail and key limitations highlighted. Successful cases, demonstrating the relevance of 3D bioprinting are also presented. Finally, the paper addresses the main research challenges and future perspectives in the field of 3D bioprinting.
AUTHOR Leu Alexa, Rebeca and Cucuruz, Andreia and Ghițulică, Cristina-Daniela and Voicu, Georgeta and Stamat (Balahura), Liliana-Roxana and Dinescu, Sorina and Vlasceanu, George Mihail and Stavarache, Cristina and Ianchis, Raluca and Iovu, Horia and Costache, Marieta
Title 3D Printable Composite Biomaterials Based on GelMA and Hydroxyapatite Powders Doped with Cerium Ions for Bone Tissue Regeneration [Abstract]
Year 2022
Journal/Proceedings International Journal of Molecular Sciences
Reftype
DOI/URL URL DOI
Abstract
The main objective was to produce 3D printable hydrogels based on GelMA and hydroxyapatite doped with cerium ions with potential application in bone regeneration. The first part of the study regards the substitution of Ca2+ ions from hydroxyapatite structure with cerium ions (Ca10-xCex(PO4)6(OH)2, xCe = 0.1, 0.3, 0.5). The second part followed the selection of the optimal concentration of HAp doped, which will ensure GelMA-based scaffolds with good biocompatibility, viability and cell proliferation. The third part aimed to select the optimal concentrations of GelMA for the 3D printing process (20%, 30% and 35%). In vitro biological assessment presented the highest level of cell viability and proliferation potency of GelMA-HC5 composites, along with a low cytotoxic potential, highlighting the beneficial effects of cerium on cell growth, also supported by Live/Dead results. According to the 3D printing experiments, the 30% GelMA enriched with HC5 was able to generate 3D scaffolds with high structural integrity and homogeneity, showing the highest suitability for the 3D printing process. The osteogenic differentiation experiments confirmed the ability of 30% GelMA-3% HC5 scaffold to support and efficiently maintain the osteogenesis process. Based on the results, 30% GelMA-3% HC5 3D printed scaffolds could be considered as biomaterials with suitable characteristics for application in bone tissue engineering.
AUTHOR Katcharava, Zviadi and Marinow, Anja and Bhandary, Rajesh and Binder, Wolfgang H.
Title 3D Printable Composite Polymer Electrolytes: Influence of SiO2 Nanoparticles on 3D-Printability [Abstract]
Year 2022
Journal/Proceedings Nanomaterials
Reftype
DOI/URL URL DOI
Abstract
We here demonstrate the preparation of composite polymer electrolytes (CPEs) for Li-ion batteries, applicable for 3D printing process via fused deposition modeling. The prepared composites consist of modified poly(ethylene glycol) (PEG), lithium bis(trifluoromethylsulfonyl)imide (LiTFSI) and SiO2-based nanofillers. PEG was successfully end group modified yielding telechelic PEG containing either ureidopyrimidone (UPy) or barbiturate moieties, capable to form supramolecular networks via hydrogen bonds, thus introducing self-healing to the electrolyte system. Silica nanoparticles (NPs) were used as a filler for further adjustment of mechanical properties of the electrolyte to enable 3D-printability. The surface functionalization of the NPs with either ionic liquid (IL) or hydrophobic alkyl chains is expected to lead to an improved dispersion of the NPs within the polymer matrix. Composites with different content of NPs (5%, 10%, 15%) and LiTFSI salt (EO/Li+ = 5, 10, 20) were analyzed via rheology for a better understanding of 3D printability, and via Broadband Dielectric Spectroscopy (BDS) for checking their ionic conductivity. The composite electrolyte PEG 1500 UPy2/LiTFSI (EO:Li 5:1) mixed with 15% NP-IL was successfully 3D printed, revealing its suitability for application as printable composite electrolytes.
AUTHOR Qin, Wen and Li, Chenkai and Liu, Chun and Wu, Siyu and Liu, Jun and Ma, Jiayi and Chen, Wenyang and Zhao, Hongbin and Zhao, Xiubo
Title 3D printed biocompatible graphene oxide, attapulgite, and collagen composite scaffolds for bone regeneration [Abstract]
Year 2022
Journal/Proceedings Journal of Biomaterials Applications
Reftype
DOI/URL DOI
Abstract
Tissue-engineered bone material is one of the effective methods to repair bone defects, but the application is restricted in clinical because of the lack of excellent scaffolds that can induce bone regeneration as well as the difficulty in making scaffolds with personalized structures. 3D printing is an emerging technology that can fabricate bespoke 3D scaffolds with precise structure. However, it is challenging to develop the scaffold materials with excellent printability, osteogenesis ability, and mechanical strength. In this study, graphene oxide (GO), attapulgite (ATP), type I collagen (Col I) and polyvinyl alcohol were used as raw materials to prepare composite scaffolds via 3D bioprinting. The composite materials showed excellent printability. The microcosmic architecture and properties was characterized by scanning electron microscopy, Fourier transform infrared and thermal gravimetric analyzer, respectively. To verify the biocompatibility of the scaffolds, the viability, proliferation and osteogenic differentiation of Bone Marrow Stromal Cells (BMSCs) on the scaffolds were assessed by CCK-8, Live/Dead staining and Real-time PCR in vitro. The composited scaffolds were then implanted into the skull defects on rat for bone regeneration. Hematoxylin-eosin staining, Masson staining and immunohistochemistry staining were carried out in vivo to evaluate the regeneration of bone tissue.The results showed that GO/ATP/COL scaffolds have been demonstrated to possess controlled porosity, water absorption, biodegradability and good apatite-mineralization ability. The scaffold consisting of 0.5% GO/ATP/COL have excellent biocompatibility and was able to promote the growth, proliferation and osteogenic differentiation of mouse BMSCs in vitro. Furthermore, the 0.5% GO/ATP/COL scaffolds were also able to promote bone regeneration of in rat skull defects. Our results illustrated that the 3D printed GO/ATP/COL composite scaffolds have good mechanical properties, excellent cytocompatibility for enhanced mouse BMSCs adhesion, proliferation, and osteogenic differentiation. All these advantages made it potential as a promising biomaterial for osteogenic reconstruction.
AUTHOR Leu Alexa, Rebeca and Cucuruz, Andreia and Ghițulică, Cristina-Daniela and Voicu, Georgeta and Stamat (Balahura), Liliana-Roxana and Dinescu, Sorina and Vlasceanu, George Mihail and Iovu, Horia and Serafim, Andrada and Ianchis, Raluca and Ciocan, Lucian-Toma and Costache, Marieta
Title 3D Printed Composite Scaffolds of GelMA and Hydroxyapatite Nanopowders Doped with Mg/Zn Ions to Evaluate the Expression of Genes and Proteins of Osteogenic Markers [Abstract]
Year 2022
Journal/Proceedings Nanomaterials
Reftype
DOI/URL URL DOI
Abstract
As bone diseases and defects are constantly increasing, the improvement of bone regeneration techniques is constantly evolving. The main purpose of this scientific study was to obtain and investigate biomaterials that can be used in tissue engineering. In this respect, nanocomposite inks of GelMA modified with hydroxyapatite (HA) substituted with Mg and Zn were developed. Using a 3D bioprinting technique, scaffolds with varying shapes and dimensions were obtained. The following analyses were used in order to study the nanocomposite materials and scaffolds obtained by the 3D printing technique: Fourier transform infrared spectrometry and X-ray diffraction (XRD), scanning electron microscopy (SEM), and micro-computed tomography (Micro-CT). The swelling and dissolvability of each scaffold were also studied. Biological studies, osteopontin (OPN), and osterix (OSX) gene expression evaluations were confirmed at the protein levels, using immunofluorescence coupled with confocal microscopy. These findings suggest the positive effect of magnesium and zinc on the osteogenic differentiation process. OSX fluorescent staining also confirmed the capacity of GelMA-HM5 and GelMA-HZ5 to support osteogenesis, especially of the magnesium enriched scaffold.
AUTHOR Yang, Xue and Li, Shuai and Ren, Ya and Qiang, Lei and Liu, Yihao and Wang, Jinwu and Dai, Kerong
Title 3D printed hydrogel for articular cartilage regeneration [Abstract]
Year 2022
Journal/Proceedings Composites Part B: Engineering
Reftype
DOI/URL URL DOI
Abstract
Tissue engineering is a promising strategy for damaged cartilage tissue repair. Three-dimensional (3D) printed hydrogel exhibits great potential in cartilage tissue engineering for fabricating 3D cell culture scaffolds, owing to its similarity to the extracellular matrix (ECM). Numerous hydrogels have been tested for 3D printing in vitro articular cartilage tissues, including natural and synthetic hydrogels that mimic their in vivo counterparts. The advancement of materials science and 3D printing techniques enables a wide range of fabrication strategies that produce cartilage tissues with delicate structures and on multiple scales. Stimuli-responsive hydrogels, which rely on the external environment to transform to a desired structure or dimension, have likewise been widely studied in tissue engineering. This review summarizes the characteristics, functions, and research conducted on 3D printed hydrogels by categorizing cutting-edge hydrogel materials commonly used in cartilage tissue engineering and their complexes. The challenges and application prospects of hydrogels in cartilage tissue engineering are described. Novel composite hydrogels must be investigated to meet the requirements of native articular cartilage in the aspects of structure, scale, mechanical properties, among others. Combining stimuli-responsive hydrogels with biological scaffolds also shows great potential in various applications, including but not limited to articular cartilage, vascularization, and osteochondral repair.
AUTHOR Kuthe, Sudhanshu and Schlothauer, Arthur and Bodkhe, Sampada and Hulme, Christopher and Ermanni, Paolo
Title 3D printed mechanically representative aortic model made of gelatin fiber reinforced silicone composite [Abstract]
Year 2022
Journal/Proceedings Materials Letters
Reftype
DOI/URL URL DOI
Abstract
Additive manufacturing (AM) is a useful technology to produce artificial aortic models for the training of transcatheter aortic valve replacement (TAVR) surgery. With AM, the models can be tailored towards the individualized aortic anatomy of patients. Most of these reported models so far are manufactured using single rubber-like materials. However, such materials do not replicate the mechanical properties of natural aortic tissue, especially the stress–strain response in higher strain (>0.1) regions. This could be problematic for surgeons training for surgeries using a model which does not exhibit properties of the real aorta. To overcome this limitation, we developed a 3D-printed, mechanically representative aortic model comprising gelatin fibers and silicone. The model is promising as a realistic analog of aortic sinus for mock TAVR surgery. Computerized tomography data was analyzed beforehand using medical imaging to identify the anatomy of a specific patient’s aortic sinus and the surrounding blood vessels. A novel silicone matrix composite reinforced with gelatin fibers designed in this work was tested and compared with the stress–strain response of aortic tissue. Such a model comprising both patient-specific geometries as well as realistic material properties of aortic tissue can be helpful for the development of next-generation medical phantoms.
AUTHOR Kamdem Tamo, Arnaud and Tran, Tuan Anh and Doench, Ingo and Jahangir, Shaghayegh and Lall, Aastha and David, Laurent and Peniche-Covas, Carlos and Walther, Andreas and Osorio-Madrazo, Anayancy
Title 3D Printing of Cellulase-Laden Cellulose Nanofiber/Chitosan Hydrogel Composites: Towards Tissue Engineering Functional Biomaterials with Enzyme-Mediated Biodegradation [Abstract]
Year 2022
Journal/Proceedings Materials
Reftype
DOI/URL URL DOI
Abstract
The 3D printing of a multifunctional hydrogel biomaterial with bioactivity for tissue engineering, good mechanical properties and a biodegradability mediated by free and encapsulated cellulase was proposed. Bioinks of cellulase-laden and cellulose nanofiber filled chitosan viscous suspensions were used to 3D print enzymatic biodegradable and biocompatible cellulose nanofiber (CNF) reinforced chitosan (CHI) hydrogels. The study of the kinetics of CNF enzymatic degradation was studied in situ in fibroblast cell culture. To preserve enzyme stability as well as to guarantee its sustained release, the cellulase was preliminarily encapsulated in chitosan–caseinate nanoparticles, which were further incorporated in the CNF/CHI viscous suspension before the 3D printing of the ink. The incorporation of the enzyme within the CHI/CNF hydrogel contributed to control the decrease of the CNF mechanical reinforcement in the long term while keeping the cell growth-promoting property of chitosan. The hydrolysis kinetics of cellulose in the 3D printed scaffolds showed a slow but sustained degradation of the CNFs with enzyme, with approximately 65% and 55% relative activities still obtained after 14 days of incubation for the encapsulated and free enzyme, respectively. The 3D printed composite hydrogels showed excellent cytocompatibility supporting fibroblast cell attachment, proliferation and growth. Ultimately, the concomitant cell growth and biodegradation of CNFs within the 3D printed CHI/CNF scaffolds highlights the remarkable potential of CHI/CNF composites in the design of tissue models for the development of 3D constructs with tailored in vitro/in vivo degradability for biomedical applications.
AUTHOR Hashimi, Noura Sayed Al and Soman, Soja Saghar and Govindharaj, Mano and Vijayavenkataraman, Sanjairaj
Title 3D printing of complex architected metamaterial structures by simple material extrusion for bone tissue engineering [Abstract]
Year 2022
Journal/Proceedings Materials Today Communications
Reftype
DOI/URL URL DOI
Abstract
Triply periodic minimal surfaces (TPMS) are gaining popularity as scaffolds for bioapplications due to their unique structure, offering strong mechanical properties and biomorphic surfaces which enhance cell attachment and proliferation. In this work, polymer TPMS sheet lattices were printed using a well-known yet unprecedented technique of manufacturing such structures; which is material extrusion (specifically, pneumatic melt extrusion). This method offers a one step, straightforward yet reliable way to print complex porous structures while retaining design accuracy and significantly simplifying the process. Multiple primitive, gyroid and cubic structures were designed using MSLattice and Solidworks with 70% porosity and 2×2×3 unit cells. The scaffolds were printed by melt extrusion of polycaprolactone (PCL) at different parameters to establish the optimal settings. Morphological features (pore size and strut thickness) were determined using scanning electron microscopy (SEM) and the accuracy of print was determined by comparing to the design, showing high print accuracy and minimal percentage errors of less than 15% in all prints. Uniaxial compression testing was used to demonstrate the different deformation processes of the scaffolds and evaluate their mechanical properties, with primitive having the highest modulus and gyroid the highest yield strength. Finally, cell viability was quantified by alamar blue cell viability assay and visualized by SEM, displaying significant increase in cell proliferation and attachment, specifically in the primitive structure. Herein we will explain the challenges faced with design and print optimization and how we overcame them, making this work the first of its kind in material extrusion (pneumatic melt extrusion) printing of TPMS scaffolds.
AUTHOR Dairaghi, Jacob and Rogozea, Dan and Cadle, Rachel and Bustamante, Joseph and Moldovan, Leni and Petrache, Horia I. and Moldovan, Nicanor I.
Title 3D Printing of Human Ossicle Models for the Biofabrication of Personalized Middle Ear Prostheses [Abstract]
Year 2022
Journal/Proceedings Applied Sciences
Reftype
DOI/URL URL DOI
Abstract
The middle ear bones (‘ossicles’) may become severely damaged due to accidents or to diseases. In these situations, the most common current treatments include replacing them with cadaver-derived ossicles, using a metal (usually titanium) prosthesis, or introducing bridges made of biocompatible ceramics. Neither of these solutions is ideal, due to the difficulty in finding or producing shape-matching replacements. However, the advent of additive manufacturing applications to biomedical problems has created the possibility of 3D-printing anatomically correct, shape- and size-personalized ossicle prostheses. To demonstrate this concept, we generated and printed several models of ossicles, as solid, porous, or soft material structures. These models were first printed with a plottable calcium phosphate/hydroxyapatite paste by extrusion on a solid support or embedded in a Carbopol hydrogel bath, followed by temperature-induced hardening. We then also printed an ossicle model with this ceramic in a porous format, followed by loading and crosslinking an alginate hydrogel within the pores, which was validated by microCT imaging. Finally, ossicle models were printed using alginate as well as a cell-containing nanocellulose-based bioink, within the supporting hydrogel bath. In selected cases, the devised workflow and the printouts were tested for repeatability. In conclusion, we demonstrate that moving beyond simplistic geometric bridges to anatomically realistic constructs is possible by 3D printing with various biocompatible materials and hydrogels, thus opening the way towards the in vitro generation of personalized middle ear prostheses for implantation.
AUTHOR Dairaghi, Jacob and Rogozea, Dan and Cadle, Rachel and Bustamante, Joseph and Moldovan, Leni and Petrache, Horia I. and Moldovan, Nicanor I.
Title 3D Printing of Human Ossicle Models for the Biofabrication of Personalized Middle Ear Prostheses [Abstract]
Year 2022
Journal/Proceedings Applied Sciences
Reftype
DOI/URL URL DOI
Abstract
The middle ear bones (‘ossicles’) may become severely damaged due to accidents or to diseases. In these situations, the most common current treatments include replacing them with cadaver-derived ossicles, using a metal (usually titanium) prosthesis, or introducing bridges made of biocompatible ceramics. Neither of these solutions is ideal, due to the difficulty in finding or producing shape-matching replacements. However, the advent of additive manufacturing applications to biomedical problems has created the possibility of 3D-printing anatomically correct, shape- and size-personalized ossicle prostheses. To demonstrate this concept, we generated and printed several models of ossicles, as solid, porous, or soft material structures. These models were first printed with a plottable calcium phosphate/hydroxyapatite paste by extrusion on a solid support or embedded in a Carbopol hydrogel bath, followed by temperature-induced hardening. We then also printed an ossicle model with this ceramic in a porous format, followed by loading and crosslinking an alginate hydrogel within the pores, which was validated by microCT imaging. Finally, ossicle models were printed using alginate as well as a cell-containing nanocellulose-based bioink, within the supporting hydrogel bath. In selected cases, the devised workflow and the printouts were tested for repeatability. In conclusion, we demonstrate that moving beyond simplistic geometric bridges to anatomically realistic constructs is possible by 3D printing with various biocompatible materials and hydrogels, thus opening the way towards the in vitro generation of personalized middle ear prostheses for implantation.
AUTHOR Dairaghi, Jacob and Rogozea, Dan and Cadle, Rachel and Bustamante, Joseph and Moldovan, Leni and Petrache, Horia I. and Moldovan, Nicanor I.
Title 3D Printing of Human Ossicle Models for the Biofabrication of Personalized Middle Ear Prostheses [Abstract]
Year 2022
Journal/Proceedings Applied Sciences
Reftype
DOI/URL URL DOI
Abstract
The middle ear bones (‘ossicles’) may become severely damaged due to accidents or to diseases. In these situations, the most common current treatments include replacing them with cadaver-derived ossicles, using a metal (usually titanium) prosthesis, or introducing bridges made of biocompatible ceramics. Neither of these solutions is ideal, due to the difficulty in finding or producing shape-matching replacements. However, the advent of additive manufacturing applications to biomedical problems has created the possibility of 3D-printing anatomically correct, shape- and size-personalized ossicle prostheses. To demonstrate this concept, we generated and printed several models of ossicles, as solid, porous, or soft material structures. These models were first printed with a plottable calcium phosphate/hydroxyapatite paste by extrusion on a solid support or embedded in a Carbopol hydrogel bath, followed by temperature-induced hardening. We then also printed an ossicle model with this ceramic in a porous format, followed by loading and crosslinking an alginate hydrogel within the pores, which was validated by microCT imaging. Finally, ossicle models were printed using alginate as well as a cell-containing nanocellulose-based bioink, within the supporting hydrogel bath. In selected cases, the devised workflow and the printouts were tested for repeatability. In conclusion, we demonstrate that moving beyond simplistic geometric bridges to anatomically realistic constructs is possible by 3D printing with various biocompatible materials and hydrogels, thus opening the way towards the in vitro generation of personalized middle ear prostheses for implantation.
AUTHOR Hilgeroth, Philipp S. and Thümmler, Justus F. and Binder, Wolfgang H.
Title 3D Printing of Triamcinolone Acetonide in Triblock Copolymers of Styrene–Isobutylene–Styrene as a Slow-Release System [Abstract]
Year 2022
Journal/Proceedings Polymers
Reftype
DOI/URL URL DOI
Abstract
Additive manufacturing has a wide range of applications and has opened up new methods of drug formulation, in turn achieving attention in medicine. We prepared styrene–isobutylene–styrene triblock copolymers (SIBS; Mn = 10 kDa–25 kDa, PDI 1,3–1,6) as a drug carrier for triamcinolone acetonide (TA), further processed by fused deposition modeling to create a solid drug release system displaying improved bioavailability and applicability. Living carbocationic polymerization was used to exert control over block length and polymeric architecture. Thermorheological properties of the SIBS polymer (22.3 kDa, 38 wt % S) were adjusted to the printability of SIBS/TA mixtures (1–5% of TA), generating an effective release system effective for more than 60 days. Continuous drug release and morphological investigations were conducted to probe the influence of the 3D printing process on the drug release, enabling 3D printing as a formulation method for a slow-release system of Triamcinolone.
AUTHOR Jonhson, Win and Xu, Xi and Bian, Ka and Xun, Yanran and Tan, Yong Hao and Chen, Zhe and Zhang, Danwei and Ding, Jun
Title 3D-Printed Hierarchical Ceramic Architectures for Ultrafast Emulsion Treatment and Simultaneous Oil-Water Filtration [Abstract]
Year 2022
Journal/Proceedings ACS Materials Lett.
Reftype
DOI/URL DOI
Abstract
There is a critical need for energy-efficient water treatment processes as the world seeks to limit global warming below 1.5 °C. Gravity-driven mesh filtration presents a sustainable solution to treating oily wastewater and emulsions, which are byproducts of many human activities. The promise of a green alternative is getting closer with the development of 3D printing combined with reusable, recyclable, and ubiquitous materials such as silica to produce durable and recyclable filters with controllable mesh spacing. In this work, several filters were fabricated to separate oily water mixtures with a separation efficiency of 99% at high flow flux by coating 3D porous ceramic architectures with organosilanes. The proposed ceramic filters can also treat oil-in-water and water-in-oil surfactant-stabilized emulsions with high flow flux. This strategy to functionalize the 3D printed silica surface to form either hydrophobic or hydrophilic surfaces can open a new possibility for gravity-driven simultaneous oil-water separation. The first gravity-driven hierarchical auto-oil-water separator (HAOS) was introduced to separate an oily water mixture into two different containers using a combination of 3D printed hierarchical hydrophilic and hydrophobic filters without an additional postseparation step.
AUTHOR Liu, Guangde and Yu, Rongrong and Liu, Dong and Xia, Yuanhua and Pei, Xiaoyuan and Wang, Wei and Min, Chunying and Liu, Shengkai and Shao, Ruiqi and Xu, Zhiwei
Title 3D-printed TiO2-Ti3C2Tx heterojunction/rGO/PDMS composites with gradient pore size for electromagnetic interference shielding and thermal management [Abstract]
Year 2022
Journal/Proceedings Composites Part A: Applied Science and Manufacturing
Reftype
DOI/URL URL DOI
Abstract
In this paper, the Ti3C2Tx/GO frame with vertical pore gradient is constructed by using 3D printing technology. The TiO2-Ti3C2Tx heterojunctions is generated in situ by thermal annealing to control the oxidation of 3D frames. TiO2-Ti3C2Tx/rGO/PDMS composites with high EMI SE and excellent thermal management performance are assembled by curing the annealed 3D frame with polydimethylsiloxane (PDMS). Notably, the composites have a unique multilayer-scale structure that rod-shaped TiO2 particles are decorated on Ti3C2Tx substrate and TiO2-Ti3C2Tx/rGO stack to form an amorphous porous gradient pore size structure. The effect of gradient pore size on EMI SE of composites is studied by simulation. Under the synergistic effect of multiple loss mechanism, the designed composites show conductivity of up to 173.1 S/m, the thickness of the composite is 2 mm and the density is 67mg/cm3, which shows excellent EMI SE of 58 dB. The composites also have excellent thermal management performance.
AUTHOR Mao, Qiuyi and Zhu, Bowen and Zhuang, Hai and Bu, Shoushan
Title 3D-Printing Assisted SF-SA Based MgP Hybrid Hydrogel Scaffold for Bone Tissue Engineering [Abstract]
Year 2022
Journal/Proceedings Frontiers in Materials
Reftype
DOI/URL DOI
Abstract
A new prototype of hybrid silk fibroin and sodium alginate (SF-SA) based osteogenic hydrogel scaffold with a concentration of 2.5% magnesium phosphate (MgP) based gel was prepared with the assistance of an extrusion-based three-dimensional (3D) printing machine in this study. To determine the optimum ratio of MgP-based gel in the hydrogel, a series of physical and biochemical experiments were performed to determine the proper concentration of MgP in two-dimensional hydrogel films, as well as the cell compatibility with these materials in sequence. The SF-SA hydrogel with 2.5wt% magnesium phosphate (SF-SA/MgP) stood out and then was used to fabricate 3D hydrogel scaffolds according to the consequences of the experiments, with SF-SA hydrogel as a control. Then the morphology and osteogenic activity of the scaffolds were further characterized by field emission scanning electron microscope (SEM), calcium mineralization staining, and reverse transcription-polymerase chain reaction (rt-PCR). The SF-SA/MgP hydrogel scaffold promoted the adhesion of rat mesenchymal stem cells with higher degrees of efficiency under dynamic culture conditions. After co-culturing in an osteogenic differentiation medium, cells seeded on SF-SA/MgP hydrogel scaffold were shown to have better performance on osteogenesis in the early stage than the control group. This work illustrates that the 3D structures of hybrid SF-SA/MgP hydrogel are promising headstones for osteogenic tissue engineering.
AUTHOR Du, Fanfan and Rupp, Harald and Jariyavidyanont, Katalee and Janke, Andreas and Petzold, Albrecht and Binder, Wolfgang and Androsch, René
Title 3D-printing of the polymer/insect-repellent system poly(l-lactic acid)/ethyl butylacetylaminopropionate (PLLA/IR3535) [Abstract]
Year 2022
Journal/Proceedings International Journal of Pharmaceutics
Reftype
DOI/URL URL DOI
Abstract
The polymer/solvent system poly(l-lactic acid)/ethyl butylacetylaminopropionate (PLLA/IR3535) is regarded as an insect-repellent-delivery system, serving, e.g., for fighting mosquito-borne tropical diseases. In such systems the solid polymer hosts the liquid repellent, with the latter slowly released to the environment, expelling mosquitoes. As a new approach, exceeding prior work about application of different technologies to obtain such devices, in this work, samples of the polymer/repellent system PLLA/IR3535 were prepared by 3D-printing. The experiments showed that it is possible to print 3D-parts containing up to 25 m% repellent, with an only minor loss of repellent during the printing process. For samples containing low amount of repellent, crystallization of PLLA was suppressed due to the rather fast cooling step and the low bed temperature of around 25 °C, being lower than the glass transition temperature of the homogeneous polymer/repellent strands. At higher repellent concentration, due to the lowering of the glass transition temperature to near or even below ambient temperature, the crystallinity slowly increased during storage after printing. For all samples, regardless of the initial repellent concentration, the repellent-release rate increases with temperature, and at ambient temperature the release-time constant is in the order of 10 days. The study successfully proved the applicability of the technology of extrusion-based 3D-printing for the preparation of polymer parts with a specific shape/design containing mosquito-repellent at a concentration which raises the expectation to be used as a repellent delivery-device.
AUTHOR Kitana, Waseem and Apsite, Indra and Hazur, Jonas and Boccaccini, Aldo R. and Ionov, Leonid
Title 4D Biofabrication of T-Shaped Vascular Bifurcation [Abstract]
Year 2022
Journal/Proceedings Advanced Materials Technologies
Reftype
DOI/URL DOI
Abstract
Abstract 4D Biofabrication – a pioneering biofabrication technique – involves the automated fabrication of 3D constructs that are dynamic and show shape-transformation capability. Although current 4D biofabrication methods are highly promising for the fabrication of vascular elements such as tubes, the fabrication of tubular junctions is still highly challenging. Here, for the first time, a 4D biofabrication-based concept for the fabrication of a T-shaped vascular bifurcation using 3D printed shape-changing layers based on a mathematical model is reported. The formation of tubular structures with various diameters is achieved by precisely controlling the parameters (e.g. crosslinking time). Consequently, the 3D printed films show self-transformation into a T-junction upon immersion in water with a diameter of a few millimeters. Perfusion of the tubular T-junction with an aqueous medium simulating blood flow through vessels shows minimal leakages with a maximum flow velocity of 0.11 m s–1. Furthermore, human umbilical vein endothelial cells seeded on the inner surface of the plain T-junction show outstanding growth properties and excellent cell viability. The achieved diameters are comparable to the native blood vessels, which is still a challenge in 3D biofabrication. This approach paves the way for the fabrication of fully automatic self-actuated vascular bifurcations as vascular grafts.
AUTHOR Arif, Zia Ullah and Khalid, Muhammad Yasir and Zolfagharian, Ali and Bodaghi, Mahdi
Title 4D bioprinting of smart polymers for biomedical applications: recent progress, challenges, and future perspectives [Abstract]
Year 2022
Journal/Proceedings Reactive and Functional Polymers
Reftype
DOI/URL URL DOI
Abstract
4D bioprinting is the next-generation additive manufacturing-based fabrication platform employed to construct intricate, adaptive, and dynamic soft and hard tissue structures as well as biomedical devices. It is achieved by using stimuli-responsive materials, especially shape memory polymers (SMPs) and hydrogels, which possess desirable biomechanical characteristics. In the last few years, numerous efforts have been made by 4D printing community to develop novel stimuli-responsive polymeric materials by considering their biomedical perspective. This review presents an up-to-date overview of 4D bioprinting technology incorporating bioprinting materials, functionalities of biomaterials as well as the focused approach towards different tissue engineering and regenerative medicine (TERM) applications. It includes bone, cardiac, neural, cartilage, drug delivery systems, and other high-value biomedical devices. This review also addresses current limitations and challenges in 4D bioprinting technology to provide a basis for foreseeable advancements for TERM applications that could be helpful for their successful utilization in clinical settings.
AUTHOR Pellegrini, Evelin and Desando, Giovanna and Petretta, Mauro and Cellamare, Antonella and Cristalli, Camilla and Pasello, Michela and Manara, Maria Cristina and Grigolo, Brunella and Scotlandi, Katia
Title A 3D Collagen-Based Bioprinted Model to Study Osteosarcoma Invasiveness and Drug Response [Abstract]
Year 2022
Journal/Proceedings Polymers
Reftype
DOI/URL URL DOI
Abstract
The biological and therapeutic limits of traditional 2D culture models, which only partially mimic the complexity of cancer, have recently emerged. In this study, we used a 3D bioprinting platform to process a collagen-based hydrogel with embedded osteosarcoma (OS) cells. The human OS U-2 OS cell line and its resistant variant (U-2OS/CDDP 1 μg) were considered. The fabrication parameters were optimized to obtain 3D printed constructs with overall morphology and internal microarchitecture that accurately match the theoretical design, in a reproducible and stable process. The biocompatibility of the 3D bioprinting process and the chosen collagen bioink in supporting OS cell viability and metabolism was confirmed through multiple assays at short- (day 3) and long- (day 10) term follow-ups. In addition, we tested how the 3D collagen-based bioink affects the tumor cell invasive capabilities and chemosensitivity to cisplatin (CDDP). Overall, we developed a new 3D culture model of OS cells that is easy to set up, allows reproducible results, and better mirrors malignant features of OS than flat conditions, thus representing a promising tool for drug screening and OS cell biology research.
AUTHOR Wang, Shuo and Shi, Haiting and Xia, Yuanhua and Liu, Dong and Min, Chunying and Zeng, Ming and Liang, Sirui and Shao, Ruiqi and Wu, Xiaoqing and Xu, Zhiwei
Title A 3D-printed framework with a gradient distributed heterojunction and fast Li+ conductivity interfaces for high-rate lithium metal anodes [Abstract]
Year 2022
Journal/Proceedings J. Mater. Chem. A
Reftype
DOI/URL DOI
Abstract
A bottleneck limiting the practical application of lithium metal anodes is the uncontrolled growth of lithium dendrites caused by gradient distributed Li+ from separators to collectors. Herein{,} 3D-printed frameworks with a gradient distributed heterojunction and fast Li+ conductivity interfaces are developed to regulate the Li+ distribution and the direction of dendrite growth. More importantly{,} the effect of different Li+ concentration gradient frameworks on Li+ deposition behavior was analyzed in detail. Synchrotron X-ray tomography demonstrates that macropores dominate the framework{,} which effectively suppresses the volume change caused by lithium deposition. DFT calculations confirm the high lithiophilicity of γ-Al2O3 and the graphene heterojunction. Synchrotron radiation-based soft X-ray absorption spectroscopy illustrates the fast Li+ conductivity Li–Al–O interface resulting from the shortened Al–O bond distance. Benefiting from the higher Li+ concentration differences during the dissolution process and Li–Al–O interfaces{,} the gradient framework can achieve a high rate performance of ∼40 mV overpotential at 10 mA cm−2 and long cycle stability of ∼1500 h at 1 mA cm−2.
AUTHOR Dorjsuren, Dorjbal and Eastman, Richard T. and Song, Min Jae and Yasgar, Adam and Chen, Yuchi and Bharti, Kapil and Zakharov, Alexey V. and Jadhav, Ajit and Ferrer, Marc and Shi, Pei-Yong and Simeonov, Anton
Title A platform of assays for the discovery of anti-Zika small-molecules with activity in a 3D-bioprinted outer-blood-retina model [Abstract]
Year 2022
Journal/Proceedings PLOS ONE
Reftype
DOI/URL DOI
Abstract
The global health emergency posed by the outbreak of Zika virus (ZIKV), an arthropod-borne flavivirus causing severe neonatal neurological conditions, has subsided, but there continues to be transmission of ZIKV in endemic regions. As such, there is still a medical need for discovering and developing therapeutical interventions against ZIKV. To identify small-molecule compounds that inhibit ZIKV disease and transmission, we screened multiple small-molecule collections, mostly derived from natural products, for their ability to inhibit wild-type ZIKV. As a primary high-throughput screen, we used a viral cytopathic effect (CPE) inhibition assay conducted in Vero cells that was optimized and miniaturized to a 1536-well format. Suitably active compounds identified from the primary screen were tested in a panel of orthogonal assays using recombinant Zika viruses, including a ZIKV Renilla luciferase reporter assay and a ZIKV mCherry reporter system. Compounds that were active in the wild-type ZIKV inhibition and ZIKV reporter assays were further evaluated for their inhibitory effects against other flaviviruses. Lastly, we demonstrated that wild-type ZIKV is able to infect a 3D-bioprinted outer-blood-retina barrier tissue model and disrupt its barrier function, as measured by electrical resistance. One of the identified compounds (3-Acetyl-13-deoxyphomenone, NCGC00380955) was able to prevent the pathological effects of the viral infection on this clinically relevant ZIKV infection model.
AUTHOR Cakal, Selgin D. and Radeke, Carmen and Alcala, Juan F. and Ellman, Ditte G. and Butdayev, Sarkhan and Andersen, Ditte C. and Calloe, Kirstine and Lind, Johan U.
Title A simple and scalable 3D printing methodology for generating aligned and extended human and murine skeletal muscle tissues [Abstract]
Year 2022
Journal/Proceedings Biomedical Materials
Reftype
DOI/URL DOI
Abstract
Preclinical biomedical and pharmaceutical research on disease causes, drug targets, and side effects increasingly relies on in vitro models of human tissue. 3D printing offers unique opportunities for generating models of superior physiological accuracy, as well as for automating their fabrication. Towards these goals, we here describe a simple and scalable methodology for generating physiologically relevant models of skeletal muscle. Our approach relies on dual-material micro-extrusion of two types of gelatin hydrogel into patterned soft substrates with locally alternating stiffness. We identify minimally complex patterns capable of guiding the large-scale self-assembly of aligned, extended, and contractile human and murine skeletal myotubes. Interestingly, we find high-resolution patterning is not required, as even patterns with feature sizes of several hundred micrometers is sufficient. Consequently, the procedure is rapid and compatible with any low-cost extrusion-based 3D printer. The generated myotubes easily span several millimeters, and various myotube patterns can be generated in a predictable and reproducible manner. The compliant nature and adjustable thickness of the hydrogel substrates, serves to enable extended culture of contractile myotubes. The method is further readily compatible with standard cell-culturing platforms as well as commercially available electrodes for electrically induced exercise and monitoring of the myotubes.
AUTHOR Anand, Resmi and Amoli, Mehdi Salar and Huysecom, An-Sofie and Amorim, Paulo Alexandre and Agten, Hannah and Geris, Liesbet and Bloemen, Veerle
Title A tunable gelatin-hyaluronan dialdehyde/methacryloyl gelatin interpenetrating polymer network hydrogel for additive tissue manufacturing [Abstract]
Year 2022
Journal/Proceedings Biomedical Materials
Reftype
DOI/URL DOI
Abstract
Methacryloyl gelatin (GelMA) is a versatile material for bioprinting because of its tunable physical properties and inherent bioactivity. Bioprinting of GelMA is often met with challenges such as lower viscosity of GelMA inks due to higher methacryloyl substitution and longer physical gelation time at room temperature. In this study, a tunable interpenetrating polymer network (IPN) hydrogel was prepared from gelatin-hyaluronan dialdehyde (Gel-HDA) Schiff’s polymer, and 100% methacrylamide substituted GelMA for biofabrication through extrusion based bioprinting. Temperature sweep rheology measurements show a higher sol-gel transition temperature for IPN (30 °C) compared to gold standard GelMA (27 °C). Furthermore, to determine the tunability of the IPN hydrogel, several IPN samples were prepared by combining different ratios of Gel-HDA and GelMA achieving a compressive modulus ranging from 20.6 ± 2.48 KPa to 116.7 ± 14.80 KPa. Our results showed that the mechanical properties and printability at room temperature could be tuned by adjusting the ratios of GelMA and Gel-HDA. To evaluate cell response to the material, MC3T3-E1 mouse pre-osteoblast cells were embedded in hydrogels and 3D-printed, demonstrating excellent cell viability and proliferation after 10 d of 3D in vitro culture, making the IPN an interesting bioink for the fabrication of 3D constructs for tissue engineering applications.
AUTHOR Müller, Florence J. and Fenton, Owen S.
Title Additive Manufacturing Approaches toward the Fabrication of Biomaterials [Abstract]
Year 2022
Journal/Proceedings Advanced Materials Interfaces
Reftype
DOI/URL DOI
Abstract
Abstract The fabrication of biomaterials represents one methodology toward the creation of next generation therapies including organ and tissue replacements, drug delivery systems, and advanced pharmaceutical constructs. Overcoming challenges associated with their customization and personalization remains an area of active research. In this review, advances in the additive manufacture of biomaterials are highlighted. Specifically, topics including construct modeling, bioink selection, deposition strategy selection, and printed construct characterization are discussed. In exploring these areas, the aim of this review is to provide an overview of the biomaterials additive manufacturing process while also highlighting its application toward the betterment of human health.
AUTHOR Özcan, Mutlu and Magini, Eduarda Blasi and Volpato, Guilherme Maziero and Cruz, Ariadne and Volpato, Claudia Angela Maziero
Title Additive Manufacturing Technologies for Fabrication of Biomaterials for Surgical Procedures in Dentistry: A Narrative Review [Abstract]
Year 2022
Journal/Proceedings Journal of Prosthodontics
Reftype
DOI/URL DOI
Abstract
Abstract Purpose To screen and critically appraise available literature regarding additive manufacturing technologies for bone graft material fabrication in dentistry. Material and Methods PubMed and Scopus were searched up to May 2021. Studies reporting the additive manufacturing techniques to manufacture scaffolds for intraoral bone defect reconstruction were considered eligible. A narrative review was synthesized to discuss the techniques for bone graft material fabrication in dentistry and the biomaterials used. Results The databases search resulted in 933 articles. After removing duplicate articles (128 articles), the titles and abstracts of the remaining articles (805 articles) were evaluated. A total of 89 articles were included in this review. Reading these articles, 5 categories of additive manufacturing techniques were identified: material jetting, powder bed fusion, vat photopolymerization, binder jetting, and material extrusion. Conclusions Additive manufacturing technologies for bone graft material fabrication in dentistry, especially 3D bioprinting approaches, have been successfully used to fabricate bone graft material with distinct compositions.
AUTHOR Murab, Sumit and Gupta, Aastha and Włodarczyk-Biegun, Małgorzata Katarzyna and Kumar, Anuj and van Rijn, Patrick and Whitlock, Patrick and Han, Sung Soo and Agrawal, Garima
Title Alginate based hydrogel inks for 3D bioprinting of engineered orthopedic tissues [Abstract]
Year 2022
Journal/Proceedings Carbohydrate Polymers
Reftype
DOI/URL URL DOI
Abstract
3D printed hydrogels have emerged as a novel tissue engineering and regeneration platform due to their ability to provide a suitable environment for cell growth. To obtain a well-defined scaffold with good post-printing shape fidelity, a proper hydrogel ink formulation plays a crucial role. In this regard, alginate has received booming interest owing to its biocompatibility, biodegradability, easy functionalization, and fast gelling behavior. Hence, this review highlights the significance of alginate-based hydrogel inks for fabricating 3D printed scaffolds for bone and cartilage regeneration. Herein, we discuss the fundamentals of direct extrusion 3D bioprinting method and provide a comprehensive overview of various alginate-based hydrogel ink formulations that have been used so far. We also summarize the requirements of hydrogel inks and 3D printed scaffolds to achieve similarity to the native tissue environment. Finally, we discuss the challenges, and research directions relevant for future clinical translation.
AUTHOR Wang, Haonan and Yu, Huaqing and Zhou, Xia and Zhang, Jilong and Zhou, Hongrui and Hao, Haitong and Ding, Lina and Li, Huiying and Gu, Yanru and Ma, Junchi and Qiu, Jianfeng and Ma, Depeng
Title An Overview of Extracellular Matrix-Based Bioinks for 3D Bioprinting [Abstract]
Year 2022
Journal/Proceedings Frontiers in Bioengineering and Biotechnology
Reftype
DOI/URL DOI
Abstract
As a microenvironment where cells reside, the extracellular matrix (ECM) has a complex network structure and appropriate mechanical properties to provide structural and biochemical support for the surrounding cells. In tissue engineering, the ECM and its derivatives can mitigate foreign body responses by presenting ECM molecules at the interface between materials and tissues. With the widespread application of three-dimensional (3D) bioprinting, the use of the ECM and its derivative bioinks for 3D bioprinting to replicate biomimetic and complex tissue structures has become an innovative and successful strategy in medical fields. In this review, we summarize the significance and recent progress of ECM-based biomaterials in 3D bioprinting. Then, we discuss the most relevant applications of ECM-based biomaterials in 3D bioprinting, such as tissue regeneration and cancer research. Furthermore, we present the status of ECM-based biomaterials in current research and discuss future development prospects.
AUTHOR Shukla, Arvind Kumar and Gao, Ge and Kim, Byoung Soo
Title Applications of 3D Bioprinting Technology in Induced Pluripotent Stem Cells-Based Tissue Engineering [Abstract]
Year 2022
Journal/Proceedings Micromachines
Reftype
DOI/URL URL DOI
Abstract
Induced pluripotent stem cells (iPSCs) are essentially produced by the genetic reprogramming of adult cells. Moreover, iPSC technology prevents the genetic manipulation of embryos. Hence, with the ensured element of safety, they rarely cause ethical concerns when utilized in tissue engineering. Several cumulative outcomes have demonstrated the functional superiority and potency of iPSCs in advanced regenerative medicine. Recently, an emerging trend in 3D bioprinting technology has been a more comprehensive approach to iPSC-based tissue engineering. The principal aim of this review is to provide an understanding of the applications of 3D bioprinting in iPSC-based tissue engineering. This review discusses the generation of iPSCs based on their distinct purpose, divided into two categories: (1) undifferentiated iPSCs applied with 3D bioprinting; (2) differentiated iPSCs applied with 3D bioprinting. Their significant potential is analyzed. Lastly, various applications for engineering tissues and organs have been introduced and discussed in detail.
AUTHOR Hermanová, Soňa and Pumera, Martin
Title Biodegradable polyester platform for extrusion-based bioprinting [Abstract]
Year 2022
Journal/Proceedings Bioprinting
Reftype
DOI/URL URL DOI
Abstract
3D extrusion-based bioprinting has become an emerging tissue engineering technology to produce complex biomimetic structures for a reconstitution of living tissues. Simultaneous dispensing of two and more (bio)polymer materials affords the fabrication of functional 3D constructions displaying both bioactivity (bioink) and defined architecture and shape (scaffold frame). To fabricate biocompatible and biodegradable 3D scaffolds, aliphatic (co)polyesters are the materials of first choice. Recent progress has shown that the function of the polyester's frame can be expanded from contemporary mechanical support to a composite matrix with smart stimuli-responsive behavior. Consequently, it opens new avenues in the fabrication of multifunctional scaffolds, which can be designed as dynamic systems and/or delivery systems for bioactive molecules in situ. This minireview is focused on utilizing the most attractive representatives of aliphatic polyesters in the areas of bioartificial tissue/organ 3D and 4D bioprinting.
AUTHOR Song, Min Jae and Quinn, Russ and Nguyen, Eric and Hampton, Christopher and Sharma, Ruchi and Park, Tea Soon and Koster, Céline and Voss, Ty and Tristan, Carlos and Weber, Claire and Singh, Anju and Dejene, Roba and Bose, Devika and Chen, Yu-Chi and Derr, Paige and Derr, Kristy and Michael, Sam and Barone, Francesca and Chen, Guibin and Boehm, Manfred and Maminishkis, Arvydas and Singec, Ilyas and Ferrer, Marc and Bharti, Kapil
Title Bioprinted 3D outer retina barrier uncovers RPE-dependent choroidal phenotype in advanced macular degeneration [Abstract]
Year 2022
Journal/Proceedings Nature Methods
Reftype Song2022
DOI/URL DOI
Abstract
Age-related macular degeneration (AMD), a leading cause of blindness, initiates in the outer-blood-retina-barrier (oBRB) formed by the retinal pigment epithelium (RPE), Bruch’s membrane, and choriocapillaris. The mechanisms of AMD initiation and progression remain poorly understood owing to the lack of physiologically relevant human oBRB models. To this end, we engineered a native-like three-dimensional (3D) oBRB tissue (3D-oBRB) by bioprinting endothelial cells, pericytes, and fibroblasts on the basal side of a biodegradable scaffold and establishing an RPE monolayer on top. In this 3D-oBRB model, a fully-polarized RPE monolayer provides barrier resistance, induces choriocapillaris fenestration, and supports the formation of Bruch’s-membrane-like structure by inducing changes in gene expression in cells of the choroid. Complement activation in the 3D-oBRB triggers dry AMD phenotypes (including subRPE lipid-rich deposits called drusen and choriocapillaris degeneration), and HIF-α stabilization or STAT3 overactivation induce choriocapillaris neovascularization and type-I wet AMD phenotype. The 3D-oBRB provides a physiologically relevant model to studying RPE-choriocapillaris interactions under healthy and diseased conditions.
AUTHOR Pontiggia, Luca and Hengel, Ingmar A.J. Van and Klar, Agnes and Rütsche, Dominic and Nanni, Monica and Scheidegger, Andreas and Figi, Sandro and Reichmann, Ernst and Moehrlen, Ueli and Biedermann, Thomas
Title Bioprinting and plastic compression of large pigmented and vascularized human dermo-epidermal skin substitutes by means of a new robotic platform [Abstract]
Year 2022
Journal/Proceedings Journal of Tissue Engineering
Reftype
DOI/URL URL DOI
Abstract
Extensive availability of engineered autologous dermo-epidermal skin substitutes (DESS) with functional and structural properties of normal human skin represents a goal for the treatment of large skin defects such as severe burns. Recently, a clinical phase I trial with this type of DESS was successfully completed, which included patients own keratinocytes and fibroblasts. Yet, two important features of natural skin were missing: pigmentation and vascularization. The first has important physiological and psychological implications for the patient, the second impacts survival and quality of the graft. Additionally, accurate reproduction of large amounts of patient’s skin in an automated way is essential for upscaling DESS production. Therefore, in the present study, we implemented a new robotic unit (called SkinFactory) for 3D bioprinting of pigmented and pre-vascularized DESS using normal human skin derived fibroblasts, blood- and lymphatic endothelial cells, keratinocytes, and melanocytes. We show the feasibility of our approach by demonstrating the viability of all the cells after printing in vitro, the integrity of the reconstituted capillary network in vivo after transplantation to immunodeficient rats and the anastomosis to the vascular plexus of the host. Our work has to be considered as a proof of concept in view of the implementation of an extended platform, which fully automatize the process of skin substitution: this would be a considerable improvement of the treatment of burn victims and patients with severe skin lesions based on patients own skin derived cells.
AUTHOR Blanco-Fernandez, Barbara and Rey-Vinolas, Sergi and Bağcı, Gülsün and Rubi-Sans, Gerard and Otero, Jorge and Navajas, Daniel and Perez-Amodio, Soledad and Engel, Elisabeth
Title Bioprinting Decellularized Breast Tissue for the Development of Three-Dimensional Breast Cancer Models [Abstract]
Year 2022
Journal/Proceedings ACS Appl. Mater. Interfaces
Reftype
DOI/URL DOI
Abstract
The tumor extracellular matrix (ECM) plays a vital role in tumor progression and drug resistance. Previous studies have shown that breast tissue-derived matrices could be an important biomaterial to recreate the complexity of the tumor ECM. We have developed a method for decellularizing and delipidating a porcine breast tissue (TDM) compatible with hydrogel formation. The addition of gelatin methacrylamide and alginate allows this TDM to be bioprinted by itself with good printability, shape fidelity, and cytocompatibility. Furthermore, this bioink has been tuned to more closely recreate the breast tumor by incorporating collagen type I (Col1). Breast cancer cells (BCCs) proliferate in both TDM bioinks forming cell clusters and spheroids. The addition of Col1 improves the printability of the bioink as well as increases BCC proliferation and reduces doxorubicin sensitivity due to a downregulation of HSP90. TDM bioinks also allow a precise three-dimensional printing of scaffolds containing BCCs and stromal cells and could be used to fabricate artificial tumors. Taken together, we have proven that these novel bioinks are good candidates for biofabricating breast cancer models.
AUTHOR Govindharaj, Mano and Al Hashemi, Noura Sayed and Soman, Soja Saghar and Vijayavenkataraman, Sanjairaj
Title Bioprinting of bioactive tissue scaffolds from ecologically-destructive fouling tunicates [Abstract]
Year 2022
Journal/Proceedings Journal of Cleaner Production
Reftype
DOI/URL URL DOI
Abstract
Urochordates are the closest invertebrate relative to humans and commonly referred to as tunicates, a name ascribed to their leathery outer “tunic”. The tunic is the outer covering of the organism which functions as the exoskeleton and is rich in carbohydrates and proteins. Invasive or fouling tunicates pose a great threat to the indigenous marine ecosystem and governments spend several hundred thousand dollars for tunicate management, considering the huge adverse economic impact it has on the shipping and fishing industries. In this work, the environmentally destructive colonizing tunicate species of Polyclinum constellatum was successfully identified in the coast of Abu Dhabi and methods of sustainably using it as wound-dressing materials, decellularized extra-cellular matrix (dECM) scaffolds for tissue engineering applications and bioinks for bioprinting of tissue constructs for regenerative medicine are proposed. The intricate three-dimensional nanofibrous cellulosic networks in the tunic remain intact even after the multi-step process of decellularization and lyophilization. The lyophilized dECM tunics possess excellent biocompatibility and remarkable tensile modulus of 3.85 ± 0.93 MPa compared to ∼0.1–1 MPa of other hydrogel systems. This work demonstrates the use of lyophilized tunics as wound-dressing materials, having outperformed the commercial dressing materials with a capacity of absorbing 20 times its weight in the dry state. This work also demonstrates the biocompatibility of dECM scaffold and dECM-derived bioink (3D bioprinting with Mouse Embryonic Fibroblasts (MEFs)). Both dECM scaffolds and bioprinted dECM-based tissue constructs show enhanced metabolic activity and cell proliferation over time. Sustainable utilization of dECM-based biomaterials from ecologically-destructive fouling tunicates proposed in this work helps preserve the marine ecosystem, shipping and fishing industries worldwide, and mitigate the huge cost spent for tunicate management.
AUTHOR Saghar Soman, Soja and Govindraj, Mano and Al Hashimi, Noura and Zhou, Jiarui and Vijayavenkataraman, Sanjairaj
Title Bioprinting of Human Neural Tissues Using a Sustainable Marine Tunicate-Derived Bioink for Translational Medicine Applications [Abstract]
Year 2022
Journal/Proceedings International Journal of Bioprinting; Vol 8, No 4 (2022)DO - 10.18063/ijb.v8i4.604
Reftype
DOI/URL URL
Abstract
Bioprinting of nervous tissue is a major challenge in the bioprinting field due to its soft consistency and complex architecture. The first step in efficient neural bioprinting is the design and optimization of printable bioinks which favor the growth and differentiation of neural tissues by providing the mechanophysiological properties of the native tissue microenvironment. However, till date, limited studies have been conducted to make tissue specific bioinks. Here, we report a novel bioink formulation specifically designed for bioprinting and differentiation of neural stem cells (NSCs) to peripheral neurons, using a marine tunicate-derived hydrogel and Matrigel. The formulation resulted in seamless bioprinting of NSCs with minimal processing time from bioink preparation to in vitro culture. The tissues exhibited excellent post-printing viability and cell proliferation along with a precise peripheral nerve morphology on in vitro differentiation. The cultured tissues showed significant cell recovery after subjecting to a freeze-thaw cycle of −80 to 37°C, indicating the suitability of the method for developing tissues compatible for long-term storage and transportation for clinical use. The study provides a robust method to use a sustainable bioink for three-dimensional bioprinting of neural tissues for translational medicine applications.
AUTHOR Saghar Soman, Soja and Govindraj, Mano and Al Hashimi, Noura and Zhou, Jiarui and Vijayavenkataraman, Sanjairaj
Title Bioprinting of Human Neural Tissues Using a Sustainable Marine Tunicate-Derived Bioink for Translational Medicine Applications [Abstract]
Year 2022
Journal/Proceedings International Journal of Bioprinting; Vol 8, No 4 (2022)DO - 10.18063/ijb.v8i4.604
Reftype
DOI/URL URL
Abstract
Bioprinting of nervous tissue is a major challenge in the bioprinting field due to its soft consistency and complex architecture. The first step in efficient neural bioprinting is the design and optimization of printable bioinks which favor the growth and differentiation of neural tissues by providing the mechanophysiological properties of the native tissue microenvironment. However, till date, limited studies have been conducted to make tissue specific bioinks. Here, we report a novel bioink formulation specifically designed for bioprinting and differentiation of neural stem cells (NSCs) to peripheral neurons, using a marine tunicate-derived hydrogel and Matrigel. The formulation resulted in seamless bioprinting of NSCs with minimal processing time from bioink preparation to in vitro culture. The tissues exhibited excellent post-printing viability and cell proliferation along with a precise peripheral nerve morphology on in vitro differentiation. The cultured tissues showed significant cell recovery after subjecting to a freeze-thaw cycle of −80 to 37°C, indicating the suitability of the method for developing tissues compatible for long-term storage and transportation for clinical use. The study provides a robust method to use a sustainable bioink for three-dimensional bioprinting of neural tissues for translational medicine applications.
AUTHOR Saghar Soman, Soja and Govindraj, Mano and Al Hashimi, Noura and Zhou, Jiarui and Vijayavenkataraman, Sanjairaj
Title Bioprinting of Human Neural Tissues Using a Sustainable Marine Tunicate-Derived Bioink for Translational Medicine Applications [Abstract]
Year 2022
Journal/Proceedings International Journal of Bioprinting; Vol 8, No 4 (2022)DO - 10.18063/ijb.v8i4.604
Reftype
DOI/URL URL
Abstract
Bioprinting of nervous tissue is a major challenge in the bioprinting field due to its soft consistency and complex architecture. The first step in efficient neural bioprinting is the design and optimization of printable bioinks which favor the growth and differentiation of neural tissues by providing the mechanophysiological properties of the native tissue microenvironment. However, till date, limited studies have been conducted to make tissue specific bioinks. Here, we report a novel bioink formulation specifically designed for bioprinting and differentiation of neural stem cells (NSCs) to peripheral neurons, using a marine tunicate-derived hydrogel and Matrigel. The formulation resulted in seamless bioprinting of NSCs with minimal processing time from bioink preparation to in vitro culture. The tissues exhibited excellent post-printing viability and cell proliferation along with a precise peripheral nerve morphology on in vitro differentiation. The cultured tissues showed significant cell recovery after subjecting to a freeze-thaw cycle of −80 to 37°C, indicating the suitability of the method for developing tissues compatible for long-term storage and transportation for clinical use. The study provides a robust method to use a sustainable bioink for three-dimensional bioprinting of neural tissues for translational medicine applications.
AUTHOR Saghar Soman, Soja and Govindraj, Mano and Al Hashimi, Noura and Zhou, Jiarui and Vijayavenkataraman, Sanjairaj
Title Bioprinting of Human Neural Tissues Using a Sustainable Marine Tunicate-Derived Bioink for Translational Medicine Applications [Abstract]
Year 2022
Journal/Proceedings International Journal of Bioprinting; Vol 8, No 4 (2022)DO - 10.18063/ijb.v8i4.604
Reftype
DOI/URL URL
Abstract
Bioprinting of nervous tissue is a major challenge in the bioprinting field due to its soft consistency and complex architecture. The first step in efficient neural bioprinting is the design and optimization of printable bioinks which favor the growth and differentiation of neural tissues by providing the mechanophysiological properties of the native tissue microenvironment. However, till date, limited studies have been conducted to make tissue specific bioinks. Here, we report a novel bioink formulation specifically designed for bioprinting and differentiation of neural stem cells (NSCs) to peripheral neurons, using a marine tunicate-derived hydrogel and Matrigel. The formulation resulted in seamless bioprinting of NSCs with minimal processing time from bioink preparation to in vitro culture. The tissues exhibited excellent post-printing viability and cell proliferation along with a precise peripheral nerve morphology on in vitro differentiation. The cultured tissues showed significant cell recovery after subjecting to a freeze-thaw cycle of −80 to 37°C, indicating the suitability of the method for developing tissues compatible for long-term storage and transportation for clinical use. The study provides a robust method to use a sustainable bioink for three-dimensional bioprinting of neural tissues for translational medicine applications.
AUTHOR Daskalakis, Evangelos and Huang, Boyang and Vyas, Cian and Acar, Anil A. and Liu, Fengyuan and Fallah, Ali and Cooper, Glen and Weightman, Andrew and Blunn, Gordon and Koç, Bahattin and Bartolo, Paulo
Title Bone Bricks: The Effect of Architecture and Material Composition on the Mechanical and Biological Performance of Bone Scaffolds [Abstract]
Year 2022
Journal/Proceedings ACS Omega
Reftype
DOI/URL DOI
Abstract
Large bone loss injuries require high-performance scaffolds with an architecture and material composition resembling native bone. However, most bone scaffold studies focus on three-dimensional (3D) structures with simple rectangular or circular geometries and uniform pores, not able to recapitulate the geometric characteristics of the native tissue. This paper addresses this limitation by proposing novel anatomically designed scaffolds (bone bricks) with nonuniform pore dimensions (pore size gradients) designed based on new lay-dawn pattern strategies. The gradient design allows one to tailor the properties of the bricks and together with the incorporation of ceramic materials allows one to obtain structures with high mechanical properties (higher than reported in the literature for the same material composition) and improved biological characteristics.
AUTHOR Fl{'{e}}geau, Killian and Puiggali-Jou, Anna and Zenobi-Wong, Marcy
Title Cartilage tissue engineering by extrusion bioprinting utilizing porous hyaluronic acid microgel bioinks [Abstract]
Year 2022
Journal/Proceedings Biofabrication
Reftype
DOI/URL DOI
Abstract
3D bioprinting offers an excellent opportunity to provide tissue-engineered cartilage to microtia patients. However, hydrogel-based bioinks are hindered by their dense and cell-restrictive environment, impairing tissue development and ultimately leading to mechanical failure of large scaffolds in vivo. Granular hydrogels, made of annealed microgels, offer a superior alternative to conventional bioinks, with their improved porosity and modularity. We have evaluated the ability of enzymatically crosslinked hyaluronic acid (HA) microgel bioinks to form mature cartilage in vivo. Microgel bioinks were formed by mechanically sizing bulk HA-tyramine hydrogels through meshes with aperture diameters of 40, 100 or 500 µm. Annealing of the microgels was achieved by crosslinking residual tyramines. Secondary crosslinked scaffolds were stable in solution and showed tunable porosity from 9% to 21%. Bioinks showed excellent rheological properties and were used to print different objects. Printing precision was found to be directly correlated to microgel size. As a proof of concept, freeform reversible embedding of suspended hydrogels printing with gelation triggered directly in the bath was performed to demonstrate the versatility of the method. The granular hydrogels support the homogeneous development of mature cartilage-like tissues in vitro with mechanical stiffening up to 200 kPa after 63 d. After 6 weeks of in vivo implantation, small-diameter microgels formed stable constructs with low immunogenicity and continuous tissue maturation. Conversely, increasing the microgel size resulted in increased inflammatory response, with limited stability in vivo. This study reports the development of new microgel bioinks for cartilage tissue biofabrication and offers insights into the foreign body reaction towards porous scaffolds implantation.
AUTHOR Cao, Chuanliang and Huang, Pengren and Prasopthum, Aruna and Parsons, Andrew J. and Ai, Fanrong and Yang, Jing
Title Characterisation of bone regeneration in 3D printed ductile PCL/PEG/hydroxyapatite scaffolds with high ceramic microparticle concentrations [Abstract]
Year 2022
Journal/Proceedings Biomater. Sci.
Reftype
DOI/URL DOI
Abstract
3D printed bioactive glass or bioceramic particle reinforced composite scaffolds for bone tissue engineering currently suffer from low particle concentration (100% breaking strain) by adding poly(ethylene glycol) which is biocompatible and FDA approved. The scaffolds require no post-printing washing to remove hazardous components. More exposure of HA microparticles on strut surfaces is enabled by incorporating higher HA concentrations. Compared to scaffolds with 72 wt% HA{,} scaffolds with higher HA content (90 wt%) enhance matrix formation but not new bone volume after 12 weeks implantation in rat calvarial defects. Histological analyses demonstrate that bone regeneration within the 3D printed scaffolds is via intramembranous ossification and starts in the central region of pores. Fibrous tissue that resembles non-union tissue within bone fractures is formed within pores that do not have new bone. The amount of blood vessels is similar between scaffolds with mainly fibrous tissue and those with more bone tissue{,} suggesting vascularization is not a deciding factor for determining the type of tissues regenerated within the pores of 3D printed scaffolds. Multinucleated immune cells are commonly present in all scaffolds surrounding the struts{,} suggesting a role of managing inflammation in bone regeneration within 3D printed scaffolds.
AUTHOR Taghizadeh, Mohsen and Taghizadeh, Ali and Yazdi, Mohsen Khodadadi and Zarrintaj, Payam and Stadler, Florian J. and Ramsey, Joshua D. and Habibzadeh, Sajjad and Hosseini Rad, Somayeh and Naderi, Ghasem and Saeb, Mohammad Reza and Mozafari, Masoud and Schubert, Ulrich S.
Title Chitosan-based inks for 3D printing and bioprinting [Abstract]
Year 2022
Journal/Proceedings Green Chem.
Reftype
DOI/URL DOI
Abstract
The advent of 3D-printing/additive manufacturing in biomedical engineering field has introduced great potential for the preparation of 3D structures that can mimic native tissues. This technology has accelerated the progress in numerous areas of regenerative medicine{,} especially led to a big wave of biomimetic functional scaffold developments for tissue engineering demands. In recent years{,} the introduction of smart bio-inks has created growing efforts to facilitate the preparation of complex and homogeneous living-cell-containing 3D constructs. In the past decade{,} a considerable body of literature has been created on identifying an ideal bioinspired-ink with excellent printability{,} cell viability{,} bioactivity{,} and mechanical properties. This state-of-the-art review article briefly outlines 3D-printing/bioprinting techniques applied for chitosan-based bio-inks{,} their resources{,} crosslinking methods{,} characteristics{,} reasons for their superiority over other bio-inks{,} and challenges of commercialization; this is followed by a comprehensive description of the full potential and the key indicators of success in terms of 3D bio-printing of such bio-inks as platforms for tissue regeneration{,} advanced biosensors{,} drug delivery{,} and wastewater treatment. Next{,} the restrictions and challenges of chitosan bio-inks are highlighted. In this work{,} we also discussed about developing a coherent research strategy based on combination of microfluidics-based lab-on-a-chip (organ-on-a-chip) platforms with 3D-bioprinting which enables designing of self-healing scaffolds. And finally{,} the potential of smart inks based on chitosan for 4D bioprinting of more detailed and practical engineered tissues and artificial organs is reviewed.
AUTHOR Monaco, Graziana and Qawasmi, Feras and El Haj, Alicia J. and Forsyth, Nicolas R. and Stoddart, Martin J.
Title Chondrogenic differentiation of human bone marrow MSCs in osteochondral implants under kinematic mechanical load is dependent on the underlying osteo component [Abstract]
Year 2022
Journal/Proceedings Frontiers in Bioengineering and Biotechnology
Reftype
DOI/URL DOI
Abstract
Chondrogenic models utilizing human mesenchymal stromal cells (hMSCs) are often simplistic, with a single cell type and the absence of mechanical stimulation. Considering the articulating joint as an organ it would be beneficial to include more complex stimulation. Within this study we applied clinically relevant kinematic load to biphasic constructs. In each case, the upper layer consisted of fibrin embedded hMSCs retained within an elastomeric polyurethane (PU) scaffold. These were randomly assigned to five base scaffolds, a cell-free fibrin PU base, viable bone, decellularized bone, 3D printed calcium phosphate or clinically used cement. This allowed the study of cross talk between viable bone and chondrogenically differentiating MSCs, while controlling for the change in stiffness of the base material. Data obtained showed that the bulk stiffness of the construct was not the defining factor in the response obtained, with viable and decellularized bone producing similar results to the softer PU base. However, the stiff synthetic materials led to reduced chondrogenesis and increased calcification in the upper MSC seeded layer. This demonstrates that the underlying base material must be considered when driving chondrogenesis of human cells using a clinically relevant loading protocol. It also indicates that the material used for bony reconstruction of osteochondral defects may influence subsequent chondrogenic potential.
AUTHOR Clua-Ferré, Laura and de Chiara, Francesco and Rodríguez-Comas, Júlia and Comelles, Jordi and Martinez, Elena and Godeau, Amelie Luise and García-Alamán, Ainhoa and Gasa, Rosa and Ramón-Azcón, Javier
Title Collagen-Tannic Acid Spheroids for β-Cell Encapsulation Fabricated Using a 3D Bioprinter [Abstract]
Year 2022
Journal/Proceedings Advanced Materials Technologies
Reftype
DOI/URL DOI
Abstract
Abstract Type 1 Diabetes results from autoimmune response elicited against β-cell antigens. Nowadays, insulin injections remain the leading therapeutic option. However, injection treatment fails to emulate the highly dynamic insulin release that β-cells provide. 3D cell-laden microspheres have been proposed during the last years as a major platform for bioengineering insulin-secreting constructs for tissue graft implantation and a model for in vitro drug screening platforms. Current microsphere fabrication technologies have several drawbacks: the need for an oil phase containing surfactants, diameter inconsistency of the microspheres, and high time-consuming processes. These technologies have widely used alginate for its rapid gelation, high processability, and low cost. However, its low biocompatible properties do not provide effective cell attachment. This study proposes a high-throughput methodology using a 3D bioprinter that employs an ECM-like microenvironment for effective cell-laden microsphere production to overcome these limitations. Crosslinking the resulting microspheres with tannic acid prevents collagenase degradation and enhances spherical structural consistency while allowing the diffusion of nutrients and oxygen. The approach allows customization of microsphere diameter with extremely low variability. In conclusion, a novel bio-printing procedure is developed to fabricate large amounts of reproducible microspheres capable of secreting insulin in response to extracellular glucose stimuli.
AUTHOR Man, Kenny and Barroso, Inês A. and Brunet, Mathieu Y. and Peacock, Ben and Federici, Angelica S. and Hoey, David A. and Cox, Sophie C.
Title Controlled Release of Epigenetically-Enhanced Extracellular Vesicles from a GelMA/Nanoclay Composite Hydrogel to Promote Bone Repair [Abstract]
Year 2022
Journal/Proceedings International Journal of Molecular Sciences
Reftype
DOI/URL URL DOI
Abstract
Extracellular vesicles (EVs) have garnered growing attention as promising acellular tools for bone repair. Although EVs’ potential for bone regeneration has been shown, issues associated with their therapeutic potency and short half-life in vivo hinders their clinical utility. Epigenetic reprogramming with the histone deacetylase inhibitor Trichostatin A (TSA) has been reported to promote the osteoinductive potency of osteoblast-derived EVs. Gelatin methacryloyl (GelMA) hydrogels functionalised with the synthetic nanoclay laponite (LAP) have been shown to effectively bind, stabilise, and improve the retention of bioactive factors. This study investigated the potential of utilising a GelMA-LAP hydrogel to improve local retention and control delivery of epigenetically enhanced osteoblast-derived EVs as a novel bone repair strategy. LAP was found to elicit a dose-dependent increase in GelMA compressive modulus and shear-thinning properties. Incorporation of the nanoclay was also found to enhance shape fidelity when 3D printed compared to LAP-free gels. Interestingly, GelMA hydrogels containing LAP displayed increased mineralisation capacity (1.41-fold) (p ≤ 0.01) over 14 days. EV release kinetics from these nanocomposite systems were also strongly influenced by LAP concentration with significantly more vesicles being released from GelMA constructs as detected by a CD63 ELISA (p ≤ 0.001). EVs derived from TSA-treated osteoblasts (TSA-EVs) enhanced proliferation (1.09-fold), migration (1.83-fold), histone acetylation (1.32-fold) and mineralisation (1.87-fold) of human bone marrow stromal cells (hBMSCs) when released from the GelMA-LAP hydrogel compared to the untreated EV gels (p ≤ 0.01). Importantly, the TSA-EV functionalised GelMA-LAP hydrogel significantly promoted encapsulated hBMSCs extracellular matrix collagen production (≥1.3-fold) and mineralisation (≥1.78-fold) in a dose-dependent manner compared to untreated EV constructs (p ≤ 0.001). Taken together, these findings demonstrate the potential of combining epigenetically enhanced osteoblast-derived EVs with a nanocomposite photocurable hydrogel to promote the therapeutic efficacy of acellular vesicle approaches for bone regeneration.
AUTHOR Gonzalez, Gustavo and Roppolo, Ignazio and Pirri, Candido Fabrizio and Chiappone, Annalisa
Title Current and emerging trends in polymeric 3D printed microfluidic devices [Abstract]
Year 2022
Journal/Proceedings Additive Manufacturing
Reftype
DOI/URL URL DOI
Abstract
During the last two decades, 3D printing technology has emerged as a valid alternative for producing microfluidic devices. 3D printing introduces new strategies to obtain high precision microfluidic parts without complex tooling and equipment, making the production of microfluidic devices cheaper, faster, and easier than conventional fabrication methods such as soft lithography. Among the main 3D techniques used for this purpose, fused filament manufacturing (FFF), inkjet 3D printing (i3Dp) and vat polymerization (VP) are of the greatest interest since they are well-established techniques in the field and are cost-affordable both in equipment and material. However, there are still some barriers in terms of technology and materials to overtake for definitively establishing 3D printing as a truly microfluidic production method. For example, the level of resolution and precision of 3D printed microfluidic parts still does not reach the level of conventional fabrication techniques, and, from a materialistic point of view, few materials present the desired characteristics (e.g., biocompatibility, optical transparency, and mechanical properties) for target areas such as medicine, analytical chemistry, and pharmaceuticals. This review intends to evaluate and analyze the current state of polymeric 3D printing techniques and materials to manufacture microfluidic chips. The article will show and discuss the latest innovations, materials, and applications of such 3D printed microstructures. The focus of this review is to provide an overview of recent and future developments in 3D printing and materials in the branch of microfluidics fabrications, showing that the selection of the right materials together with the design freedom afforded by 3D printing will be the cornerstone for microfluidic development.
AUTHOR Sarti, Mattia and Parlani, Maria and Diaz-Gomez, Luis and Mikos, Antonios G. and Cerveri, Pietro and Casarin, Stefano and Dondossola, Eleonora
Title Deep Learning for Automated Analysis of Cellular and Extracellular Components of the Foreign Body Response in Multiphoton Microscopy Images [Abstract]
Year 2022
Journal/Proceedings Frontiers in Bioengineering and Biotechnology
Reftype
DOI/URL DOI
Abstract
The Foreign body response (FBR) is a major unresolved challenge that compromises medical implant integration and function by inflammation and fibrotic encapsulation. Mice implanted with polymeric scaffolds coupled to intravital non-linear multiphoton microscopy acquisition enable multiparametric, longitudinal investigation of the FBR evolution and interference strategies. However, follow-up analyses based on visual localization and manual segmentation are extremely time-consuming, subject to human error, and do not allow for automated parameter extraction. We developed an integrated computational pipeline based on an innovative and versatile variant of the U-Net neural network to segment and quantify cellular and extracellular structures of interest, which is maintained across different objectives without impairing accuracy. This software for automatically detecting the elements of the FBR shows promise to unravel the complexity of this pathophysiological process.
AUTHOR Wei, Shan and Zhang, Ren-Gang and Wang, Zheng-Yu
Title Deferoxamine/magnesium modified β-tricalcium phosphate promotes the bone regeneration in osteoporotic rats [Abstract]
Year 2022
Journal/Proceedings Journal of Biomaterials Applications
Reftype
DOI/URL DOI
Abstract
Recently, Deferoxamine (DFO) and magnesium (Mg) have been identified as critical factors for angiogenesis and bone formation. However, in current research studies, there is a lack of focus on whether DFO plus Mg can affect the regeneration of β-tricalcium phosphate (β-TCP) in osteoporosis and through what biological mechanisms. Therefore, the present work was aimed to preparation and evaluate the effect of Deferoxamine/magnesium modified β-tricalcium phosphate promotes (DFO/Mg-TCP) in ovariectomized rats model and preliminary exploration of possible mechanisms. The MC3T3-E1 cells were co-cultured with the exudate of DFO/Mg-TCP and induced to osteogenesis, and the cell viability, osteogenic activity were observed by Cell Counting Kit-8(CCK-8), Alkaline Phosphatase (ALP) staining, Alizarin Red Staining (RES) and Western Blot. In vitro experiments, CCK-8, ALP and ARS staining results show that the mineralization and osteogenic activity of MC3T3-E1increased significantly after intervention by DFO/Mg-TCP, as well as a higher levels of protein expressions including VEGF, OC, Runx-2 and HIF-1α. In vivo experiment, Micro-CT and Histological analysis evaluation show that DFO/Mg-TCP treatment presented the stronger effect on bone regeneration, bone mineralization and biomaterial degradation, when compared with OVX+Mg-TCP group and OVX+TCP group, as well as a higher VEGF, OC, Runx-2 and HIF-1α gene expression. The present study indicates that treatment with DFO/Mg-TCP was associated with increased regeneration by enhancing the function of osteoblasts in an OVX rat.
AUTHOR Cadle, Rachel and Rogozea, Dan and Moldovan, Leni and Moldovan, Nicanor I.
Title Design and Implementation of Anatomically Inspired Mesenteric and Intestinal Vascular Patterns for Personalized 3D Bioprinting [Abstract]
Year 2022
Journal/Proceedings Applied Sciences
Reftype
DOI/URL URL DOI
Abstract
Recent progress in bioprinting has made possible the creation of complex 3D intestinal constructs, including vascularized villi. However, for their integration into functional units useful for experimentation or implantation, the next challenge is to endow them with a larger-scale, anatomically realistic vasculature. In general, the perfusion of bioprinted constructs has remained difficult, and the current solution is to provide them with mostly linear and simply branched channels. To address this limitation, here we demonstrated an image analysis-based workflow leading through computer-assisted design from anatomic images of rodent mesentery and colon to the actual printing of such patterns with paste and hydrogel bioinks. Moreover, we reverse-engineered the 2D intestinal image-derived designs into cylindrical objects, and 3D-printed them in a support hydrogel. These results open the path towards generation of more realistically vascularized tissue constructs for a variety of personalized medicine applications.
AUTHOR Cadle, Rachel and Rogozea, Dan and Moldovan, Leni and Moldovan, Nicanor I.
Title Design and Implementation of Anatomically Inspired Mesenteric and Intestinal Vascular Patterns for Personalized 3D Bioprinting [Abstract]
Year 2022
Journal/Proceedings Applied Sciences
Reftype
DOI/URL URL DOI
Abstract
Recent progress in bioprinting has made possible the creation of complex 3D intestinal constructs, including vascularized villi. However, for their integration into functional units useful for experimentation or implantation, the next challenge is to endow them with a larger-scale, anatomically realistic vasculature. In general, the perfusion of bioprinted constructs has remained difficult, and the current solution is to provide them with mostly linear and simply branched channels. To address this limitation, here we demonstrated an image analysis-based workflow leading through computer-assisted design from anatomic images of rodent mesentery and colon to the actual printing of such patterns with paste and hydrogel bioinks. Moreover, we reverse-engineered the 2D intestinal image-derived designs into cylindrical objects, and 3D-printed them in a support hydrogel. These results open the path towards generation of more realistically vascularized tissue constructs for a variety of personalized medicine applications.
AUTHOR Cadle, Rachel and Rogozea, Dan and Moldovan, Leni and Moldovan, Nicanor I.
Title Design and Implementation of Anatomically Inspired Mesenteric and Intestinal Vascular Patterns for Personalized 3D Bioprinting [Abstract]
Year 2022
Journal/Proceedings Applied Sciences
Reftype
DOI/URL URL DOI
Abstract
Recent progress in bioprinting has made possible the creation of complex 3D intestinal constructs, including vascularized villi. However, for their integration into functional units useful for experimentation or implantation, the next challenge is to endow them with a larger-scale, anatomically realistic vasculature. In general, the perfusion of bioprinted constructs has remained difficult, and the current solution is to provide them with mostly linear and simply branched channels. To address this limitation, here we demonstrated an image analysis-based workflow leading through computer-assisted design from anatomic images of rodent mesentery and colon to the actual printing of such patterns with paste and hydrogel bioinks. Moreover, we reverse-engineered the 2D intestinal image-derived designs into cylindrical objects, and 3D-printed them in a support hydrogel. These results open the path towards generation of more realistically vascularized tissue constructs for a variety of personalized medicine applications.
AUTHOR Geevarghese, Rency and Somasekharan, Lakshmi T. and Bhatt, Anugya and Kasoju, Naresh and Nair, Renjith P.
Title Development and evaluation of a multicomponent bioink consisting of alginate, gelatin, diethylaminoethyl cellulose and collagen peptide for 3D bioprinting of tissue construct for drug screening application [Abstract]
Year 2022
Journal/Proceedings International Journal of Biological Macromolecules
Reftype
DOI/URL URL DOI
Abstract
Three dimensional (3D) bioprinting technology has been making a progressive advancement in the field of tissue engineering to produce tissue constructs that mimic the shape, framework, and microenvironment of an organ. The technology has not only paved the way to organ development but has been widely studied for its application in drug and cosmetic testing using 3D bioprinted constructs. However, not much has been explored on the utilization of bioprinting technology for the development of tumor models to test anti-cancer drug efficacy. The conventional methodology involves a two dimensional (2D) monolayer model to test cellular drug response which has multiple limitations owing to its inability to mimic the natural tissue environment. The choice of bioink for 3D bioprinting is critical as cell morphology and proliferation depend greatly on the property of bioink. In this study, we developed a multicomponent bioink composed of alginate, diethylaminoethyl cellulose, gelatin, and collagen peptide to generate a 3D bioprinted construct. The bioink has been characterised and validated for its printability, shape fidelity and biocompatibility to be used for generating tumor models. Further, a bioprinted tumor model was developed using lung cancer cell line and the efficacy of 3D printed construct for drug screening application was established.
AUTHOR Curti, Filis and Serafim, Andrada and Olaret, Elena and Dinescu, Sorina and Samoila, Iuliana and Vasile, Bogdan Stefan and Iovu, Horia and Lungu, Adriana and Stancu, Izabela Cristina and Marinescu, Rodica
Title Development of Biocomposite Alginate-Cuttlebone-Gelatin 3D Printing Inks Designed for Scaffolds with Bone Regeneration Potential [Abstract]
Year 2022
Journal/Proceedings Marine Drugs
Reftype
DOI/URL URL DOI
Abstract
Fabrication of three-dimensional (3D) scaffolds using natural biomaterials introduces valuable opportunities in bone tissue reconstruction and regeneration. The current study aimed at the development of paste-like 3D printing inks with an extracellular matrix-inspired formulation based on marine materials: sodium alginate (SA), cuttlebone (CB), and fish gelatin (FG). Macroporous scaffolds with microporous biocomposite filaments were obtained by 3D printing combined with post-printing crosslinking. CB fragments were used for their potential to stimulate biomineralization. Alginate enhanced CB embedding within the polymer matrix as confirmed by scanning electron microscopy (ESEM) and micro-computer tomography (micro-CT) and improved the deformation under controlled compression as revealed by micro-CT. SA addition resulted in a modulation of the bulk and surface mechanical behavior, and lead to more elongated cell morphology as imaged by confocal microscopy and ESEM after the adhesion of MC3T3-E1 preosteoblasts at 48 h. Formation of a new mineral phase was detected on the scaffold’s surface after cell cultures. All the results were correlated with the scaffolds’ compositions. Overall, the study reveals the potential of the marine materials-containing inks to deliver 3D scaffolds with potential for bone regeneration applications.
AUTHOR von Mässenhausen, Anne and Gonzalez, Nadia Zamora and Maremonti, Francesca and Belavgeni, Alexia and Tonnus, Wulf and Meyer, Claudia and Beer, Kristina and Hannani, Monica T. and Lau, Arthur and Peitzsch, Mirko and Hoppenz, Paul and Locke, Sophie and Chavakis, Triantafyllos and Kramann, Rafael and Muruve, Daniel A. and Hugo, Christian and Bornstein, Stefan R. and Linkermann, Andreas
Title Dexamethasone sensitizes to ferroptosis by glucocorticoid receptor–induced dipeptidase-1 expression and glutathione depletion [Abstract]
Year 2022
Journal/Proceedings Science Advances
Reftype
DOI/URL DOI
Abstract
Dexamethasone is widely used as an immunosuppressive therapy and recently as COVID-19 treatment. Here, we demonstrate that dexamethasone sensitizes to ferroptosis, a form of iron-catalyzed necrosis, previously suggested to contribute to diseases such as acute kidney injury, myocardial infarction, and stroke, all of which are triggered by glutathione (GSH) depletion. GSH levels were significantly decreased by dexamethasone. Mechanistically, we identified that dexamethasone up-regulated the GSH metabolism regulating protein dipeptidase-1 (DPEP1) in a glucocorticoid receptor (GR)–dependent manner. DPEP1 knockdown reversed the phenotype of dexamethasone-induced ferroptosis sensitization. Ferroptosis inhibitors, the DPEP1 inhibitor cilastatin, or genetic DPEP1 inactivation reversed the dexamethasone-induced increase in tubular necrosis in freshly isolated renal tubules. Our data indicate that dexamethasone sensitizes to ferroptosis by a GR-mediated increase in DPEP1 expression and GSH depletion. Together, we identified a previously unknown mechanism of glucocorticoid-mediated sensitization to ferroptosis bearing clinical and therapeutic implications. Dexamethasone leads to GR-mediated increased DPEP1 expression and GSH depletion, resulting in higher ferroptosis sensitivity.
AUTHOR Parlani, Maria and Bedell, Matthew L. and Mikos, Antonios G. and Friedl, Peter and Dondossola, Eleonora
Title Dissecting the recruitment and self-organization of αSMA-positive fibroblasts in the foreign body response [Abstract]
Year 2022
Journal/Proceedings Science Advances
Reftype
DOI/URL DOI
Abstract
The foreign body response (FBR) is a clinically relevant issue that can cause malfunction of implanted medical devices by fibrotic encapsulation. Whereas inflammatory aspects of the FBR have been established, underlying fibroblast-dependent mechanisms remain unclear. We here combine multiphoton microscopy with ad hoc reporter mice expressing α–smooth muscle actin (αSMA) protein to determine the locoregional fibroblast dynamics, activation, and fibrotic encapsulation of polymeric materials. Fibroblasts invaded as individual cells and established a multicellular network, which transited to a two-compartment fibrotic response displaying an αSMA cold external capsule and a long-lasting, inner αSMA hot environment. The recruitment of fibroblasts and extent of fibrosis were only incompletely inhibited after depletion of macrophages, implicating coexistence of macrophage-dependent and macrophage-independent mediators. Furthermore, neither altering material type or porosity modulated αSMA+ cell recruitment and distribution. This identifies fibroblast activation and network formation toward a two-compartment FBR as a conserved, self-organizing process partially independent of macrophages. Fibroblast recruitment in the foreign body response is a conserved, self-organizing process partially independent of macrophages.
AUTHOR Amirifar, Leyla and Besanjideh, Mohsen and Nasiri, Rohollah and Shamloo, Amir and Nasrollahi, Fatemeh and de Barros, Natan Roberto and Davoodi, Elham and Erdem, Ahmet and Mahmoodi, Mahboobeh and Hosseini, Vahid and Montazerian, Hossein and Jahangiry, Jamileh and Darabi, Mohammad Ali and Haghniaz, Reihaneh and Dokmeci, Mehmet R. and Annabi, Nasim and Ahadian, Samad and Khademhosseini, Ali
Title Droplet-based microfluidics in biomedical applications [Abstract]
Year 2022
Journal/Proceedings Biofabrication
Reftype
DOI/URL DOI
Abstract
Droplet-based microfluidic systems have been employed to manipulate discrete fluid volumes with immiscible phases. Creating the fluid droplets at microscale has led to a paradigm shift in mixing, sorting, encapsulation, sensing, and designing high throughput devices for biomedical applications. Droplet microfluidics has opened many opportunities in microparticle synthesis, molecular detection, diagnostics, drug delivery, and cell biology. In the present review, we first introduce standard methods for droplet generation (i.e. passive and active methods) and discuss the latest examples of emulsification and particle synthesis approaches enabled by microfluidic platforms. Then, the applications of droplet-based microfluidics in different biomedical applications are detailed. Finally, a general overview of the latest trends along with the perspectives and future potentials in the field are provided.
AUTHOR Da Silva, Aruã Clayton and Akbar, Teuku Fawzul and Paterson, Thomas Edward and Werner, Carsten and Tondera, Christoph and Minev, Ivan Rusev
Title Electrically Controlled Click-Chemistry for Assembly of Bioactive Hydrogels on Diverse Micro- and Flexible Electrodes [Abstract]
Year 2022
Journal/Proceedings Macromolecular Rapid Communications
Reftype
DOI/URL DOI
Abstract
Abstract The seamless integration of electronics with living matter requires advanced materials with programmable biological and engineering properties. Here electrochemical methods to assemble semi-synthetic hydrogels directly on electronically conductive surfaces are explored. Hydrogels consisting of poly (ethylene glycol) (PEG) and heparin building blocks are polymerized by spatially controlling the click reaction between their thiol and maleimide moieties. The gels are grown as conformal coatings or 2D patterns on ITO, gold, and PtIr. This study demonstrates that such coatings significantly influence the electrochemical properties of the metal-electrolyte interface, likely due to space charge effects in the gels. Further a promising route toward engineering and electrically addressable extracellular matrices by printing arrays of gels with binary cell adhesiveness on flexible conductive surfaces is highlighted.
AUTHOR Da Silva, Aruã Clayton and Wang, Junzhi and Minev, Ivan Rusev
Title Electro-assisted printing of soft hydrogels via controlled electrochemical reactions [Abstract]
Year 2022
Journal/Proceedings Nature Communications
Reftype Da Silva2022
DOI/URL DOI
Abstract
Hydrogels underpin many applications in tissue engineering, cell encapsulation, drug delivery and bioelectronics. Methods improving control over gelation mechanisms and patterning are still needed. Here we explore a less-known gelation approach relying on sequential electrochemical-chemical-chemical (ECC) reactions. An ionic species and/or molecule in solution is oxidised over a conductive surface at a specific electric potential. The oxidation generates an intermediate species that reacts with a macromolecule, forming a hydrogel at the electrode-electrolyte interface. We introduce potentiostatic control over this process, allowing the selection of gelation reactions and control of hydrogel growth rate. In chitosan and alginate systems, we demonstrate precipitation, covalent and ionic gelation mechanisms. The method can be applied in the polymerisation of hybrid systems consisting of more than one polymer. We demonstrate concomitant deposition of the conductive polymer Poly(3,4-ethylenedioxythiophene) (PEDOT) and alginate. Deposition of the hydrogels occurs in small droplets held between a conductive plate (working electrode, WE), a printing nozzle (counter electrode, CE) and a pseudoreference electrode (reference electrode, RE). We install this setup on a commercial 3D printer to demonstrate patterning of adherent hydrogels on gold and flexible ITO foils. Electro-assisted printing may contribute to the integration of well-defined hydrogels on hybrid electronic-hydrogel devices for bioelectronics applications.
AUTHOR Strauß, Svenja and Schroth, Bianca and Hubbuch, Jürgen
Title Evaluation of the Reproducibility and Robustness of Extrusion-Based Bioprinting Processes Applying a Flow Sensor [Abstract]
Year 2022
Journal/Proceedings Frontiers in bioengineering and biotechnology
Reftype
DOI/URL URL DOI
Abstract
Bioprinting is increasingly regarded as a suitable additive manufacturing method in biopharmaceutical process development and formulation. In order to manage the leap from research to industrial application, higher levels of reproducibility and a standardized bioprinting process are prerequisites. This said, the concept of process analytical technologies, standard in the biopharmaceutical industry, is still at its very early steps. To date most extrusion-based printing processes are controlled over penumatic pressure and thus not adaptive to environmental or system related changes over several experimental runs. A constant set pressure applied over a number of runs, might lead to variations in flow rate and thus to unreliable printed constructs. With this in mind, the simple question arises whether a printing process based on a set flow rate could improve reproduciblity and transfer to different printing systems. The control and monitoring of flow rate aim to introduce the concept of PAT in the field of bioprinting. This study investigates the effect of different processing modes (set pressure vs. set flow rate) on printing reproducibility occurring during an extrusion-based printing process consisting of 6 experimental runs consisting of 3 printed samples each. Additionally, the influence of different filling levels of the ink containing cartridge during a printing process was determined. Different solutions based on a varying amount of alginate polymer and Kolliphor hydrogels in varying concentrations showed the need for individual setting of printing parameter. To investigate parameter transferability among different devices two different printers were used and the flow was monitored using a flow sensor attached to the printing unit. It could be demonstrated that a set flow rate controlled printing process improved accuracy and the filling level also affects the accuracy of printing, the magnitude of this effects varies as the cartridge level declined. The transferability between printed devices was eased by setting the printing parameters according to a set flow rate of each bioink disregarding the value of the set pressure. Finally, by a bioprinting porcess control based on a set flow rate, the coefficient of variance for printed objects could be reduced from 0.2 to 0.02 for 10% (w/v) alginate polymer solutions.
AUTHOR Ke, Dongxu and Niu, Changmei and Yang, Xi
Title Evolution of 3D bioprinting-from the perspectives of bioprinting companies [Abstract]
Year 2022
Journal/Proceedings Bioprinting
Reftype
DOI/URL URL DOI
Abstract
3D bioprinting is an advanced additive manufacturing approach evolved from traditional 3D printing to fulfill specific requirements for the applications of tissue engineering and regenerative medicine. During the past decade, bioprinting has progressed substantially showing its extraordinary potential for applications in different biomedical fields, however, a huge gap still exists for the large-scale industrialization and commercialization of this technology. In this review article, we will first discuss several successful bioprinting companies and their current efforts on the commercialization of bioprinting technology. Then future challenges that restrict the application of bioprinting will be discussed. Finally, we will conclude several key factors, which inhibit the translational development of bioprinting, while should be addressed soon.
AUTHOR Ramakrishnan, Rashmi and Kasoju, Naresh and Raju, Riya and Geevarghese, Rency and Gauthaman, Ashna and Bhatt, Anugya
Title Exploring the Potential of Alginate-Gelatin-Diethylaminoethyl Cellulose-Fibrinogen based Bioink for 3D Bioprinting of Skin Tissue Constructs [Abstract]
Year 2022
Journal/Proceedings Carbohydrate Polymer Technologies and Applications
Reftype
DOI/URL URL DOI
Abstract
Designing printable bioinks for 3D bioprinting capable of supporting cellular viability with post-printing functionality remains challenging. Native ECM offers several physical, chemical, and biological cues that are difficult to restore using only a single component. Herein, we have optimized a multicomponent-based bioink formulation comprising alginate (ALG), gelatin (GEL), diethylaminoethyl cellulose (DCEL) and fibrinogen (FIB), termed as ALG-GEL-DCEL-FIB bioink for potential application in bioprinting and biofabrication of skin tissue equivalents. The designed formulation was extensively studied for its printability, physico-chemical, rheological, and biocompatibility properties. Excellent printability, shape fidelity and cell-laden tissue equivalent printing were established using the RegenHu 3D Discovery Bioprinter. The human primary fibroblast and keratinocyte-laden bioprinted constructs exhibited good cell viability. Long term culture of 4 weeks comprising 5 days of air-liquid-interphase followed by 21 days of submerged culture produced biomimetic tissue histology in the ALG-GEL-DCEL-FIB bioink printed constructs. Specific epidermal-dermal marker expressions proving functionality were evident in immunohistochemical, biochemical and gene expression analysis. The ALG-GEL-DCEL-FIB bioink may be explored further for potential biofabrication and therapeutic applications.
AUTHOR Neubauer, Vanessa J. and Hüter, Florian and Wittmann, Johannes and Trossmann, Vanessa T. and Kleinschrodt, Claudia and Alber-Laukant, Bettina and Rieg, Frank and Scheibel, Thomas
Title Flow Simulation and Gradient Printing of Fluorapatite- and Cell-Loaded Recombinant Spider Silk Hydrogels [Abstract]
Year 2022
Journal/Proceedings Biomolecules
Reftype
DOI/URL URL DOI
Abstract
Hierarchical structures are abundant in almost all tissues of the human body. Therefore, it is highly important for tissue engineering approaches to mimic such structures if a gain of function of the new tissue is intended. Here, the hierarchical structures of the so-called enthesis, a gradient tissue located between tendon and bone, were in focus. Bridging the mechanical properties from soft to hard secures a perfect force transmission from the muscle to the skeleton upon locomotion. This study aimed at a novel method of bioprinting to generate gradient biomaterial constructs with a focus on the evaluation of the gradient printing process. First, a numerical approach was used to simulate gradient formation by computational flow as a prerequisite for experimental bioprinting of gradients. Then, hydrogels were printed in a single cartridge printing set-up to transfer the findings to biomedically relevant materials. First, composites of recombinant spider silk hydrogels with fluorapatite rods were used to generate mineralized gradients. Then, fibroblasts were encapsulated in the recombinant spider silk-fluorapatite hydrogels and gradually printed using unloaded spider silk hydrogels as the second component. Thereby, adjustable gradient features were achieved, and multimaterial constructs were generated. The process is suitable for the generation of gradient materials, e.g., for tissue engineering applications such as at the tendon/bone interface.
AUTHOR Rahimnejad, Maedeh and Adoungotchodo, Atma and Demarquette, Nicole R. and Lerouge, Sophie
Title FRESH bioprinting of biodegradable chitosan thermosensitive hydrogels [Abstract]
Year 2022
Journal/Proceedings Bioprinting
Reftype
DOI/URL URL DOI
Abstract
Thermosensitive chitosan (CH)-based hydrogels prepared with a mix of sodium bicarbonate and β-glycerophosphate as gelling agents rapidly pass from a liquid at room temperature to a mechanically strong solid at body temperature without any crosslinker. They show excellent potential for tissue engineering applications and could be interesting candidates for bioprinting. Unfortunately, since gelation is not instantaneous, formulations compatible with cell encapsulation (chitosan concentrations around 2% or lower) lead to very poor resolution and fidelity due to filament spreading. Here, we investigate the FRESH bioprinting approach with a warm sacrificial support bath, to overcome these limitations and enhance their bioprintability. First, a support bath, made of Pluronic including sodium chloride salt as a rheology modifier agent, was designed to meet the specific physical state requirements (solid at 37 °C and liquid at room temperature) and rheological properties appropriate for bioprinting. This support bath presented yield stress of over 100 Pa, a shear thinning behavior, and fast self-healing during cyclic recovery tests. Three different chitosan hydrogels (CH2%w/v, CH3%w/v, and a mixture of CH and gelatin) were tested for their ability to form filament and 3D structures, with and without a support bath. Both the resolution and mechanical properties of the printed structure were drastically enhanced using the FRESH method, with an approximate four fold decrease of the filament diameter which is close to the needle diameter. The printed structures were easily harvested without altering their shape by cooling down the support bath, and do not swell when immersed in PBS. Live/dead assays confirmed that the viability of encapsulated mesenchymal stem cells was highest in CH2% and that the support bath-assisted bioprinting process did not adversely impact cell viability. This study demonstrates that using a warm FRESH-like approach drastically enhances the potential for bioprinting of the thermosensitive biodegradable chitosan hydrogels and opens up a wide range of applications for 3D models and tissue engineering.
AUTHOR Lee, Hanna and Kim, Soon Hee and Lee, Ji Seung and Lee, Young Jin and Lee, Ok Joo and Ajiteru, Olatunji and Sultan, Md Tipu and Lee, Suk Woo and Park, Chan Hum
Title Functional Skeletal Muscle Regeneration Using Muscle Mimetic Tissue Fabricated by Microvalve-Assisted Coaxial 3D Bioprinting [Abstract]
Year 2022
Journal/Proceedings Advanced Healthcare Materials
Reftype
DOI/URL DOI
Abstract
Abstract 3D-printed artificial skeletal muscle, which mimics the structural and functional characteristics of native skeletal muscle, is a promising treatment method for muscle reconstruction. Although various fabrication techniques for skeletal muscle using 3D bio-printers are studied, it is still challenging to build a functional muscle structure. A strategy using microvalve-assisted coaxial 3D bioprinting in consideration of functional skeletal muscle fabrication is reported. The unit (artificial muscle fascicle: AMF) of muscle mimetic tissue is composed of a core filled with medium-based C2C12 myoblast aggregates as a role of muscle fibers and a photo cross-linkable hydrogel-based shell as a role of connective tissue in muscles that enhances printability and cell adhesion and proliferation. Especially, a microvalve system is applied for the core part with even cell distribution and strong cell–cell interaction. This system enhances myotube formation and consequently shows spontaneous contraction. A multi-printed AMF (artificial muscle tissue: AMT) as a piece of muscle is implanted into the anterior tibia (TA) muscle defect site of immunocompromised rats. As a result, the TA-implanted AMT responds to electrical stimulation and represents histologically regenerated muscle tissue. This microvalve-assisted coaxial 3D bioprinting shows a significant step forward to mimicking native skeletal muscle tissue.
AUTHOR Li, Ming-Chia and Chang, Pu-Yuan and Luo, Huai-Rou and Chang, Ling-Yuan and Lin, Chuan-Yi and Yang, Chih-Yu and Lee, Oscar Kuang-Sheng and Lee, Yan-Hwa Wu and Tarng, Der-Cherng
Title Functioning tailor-made 3D-printed vascular graft for hemodialysis [Abstract]
Year 2022
Journal/Proceedings The Journal of Vascular Access
Reftype
DOI/URL DOI
Abstract
Background:The two ends of arteriovenous graft (AVG) are anastomosed to the upper limb vessels by surgery for hemodialysis therapy. However, the size of upper limb vessels varies to a large extent among different individuals.Methods:According to the shape and size of neck vessels quantified from the preoperative computed tomography angiographic scan, the ethylene-vinyl acetate (EVA)-based AVG was produced in H-shape by the three-dimensional (3D) printer and then sterilized. This study investigated the function of this novel 3D-printed AVG in vitro and in vivo.Results:This 3D-printed AVG can be implanted in the rabbit’s common carotid artery and common jugular vein with ease and functions in vivo. The surgical procedure was quick, and no suture was required. The blood loss was minimal, and no hematoma was noted at least 1 week after the surgery. The blood flow velocity within the implanted AVG was 14.9 ± 3.7 cm/s. Additionally, the in vitro characterization experiments demonstrated that this EVA-based biomaterial is biocompatible and possesses a superior recovery property than ePTFE after hemodialysis needle cannulation.Conclusions:Through the 3D printing technology, the EVA-based AVG can be tailor-made to fit the specific vessel size. This kind of 3D-printed AVG is functioning in vivo, and our results realize personalized vascular implants. Further large-animal studies are warranted to examine the long-term patency.
AUTHOR Mota, Fabio Batista and Braga, Luiza Amara Maciel and Cabral, Bernardo Pereira and Filho, Carlos Gilbert Conte
Title Future of Bioprinted Tissues аnd Organs: A Two-Wave Global Survey [Abstract]
Year 2022
Journal/Proceedings Foresight and STI Governance
Reftype
DOI/URL URL
Abstract
Technologies of 3D and 4D bioprinting make it possible to restore or replace tissues and organs, solving the problem of the lack of donor resources and reducing the risks of implant rejection. This article presents the results of a two-stage global survey of specialists in tissue engineering on the prospects of bioprinting in preclinical studies and clinical practice. A picture of possible tracks and horizons upon which the implementation of the considered solutions is possible is presented. According to the results of the survey, in the next two decades it will be possible to recreate tissues and organs suitable for implantation and drug testing. There will be a market for bioprinted products, the problem of organ shortages and adverse reactions to drugs will be solved. These changes may significantly affect not only the practice of biomedical research, drug testing, and medicine, but also the healthcare sector in general, which implies the need for a preventive review of current policies. A practical and accessible tool for identifying and interviewing a large number of experts around the world is proposed, which may be useful for new Foresight studies.
AUTHOR Mota, Fabio Batista and Braga, Luiza Amara Maciel and Cabral, Bernardo Pereira and Filho, Carlos Gilbert Conte
Title Future of Bioprinted Tissues аnd Organs: A Two-Wave Global Survey [Abstract]
Year 2022
Journal/Proceedings Foresight and STI Governance
Reftype
DOI/URL URL
Abstract
Technologies of 3D and 4D bioprinting make it possible to restore or replace tissues and organs, solving the problem of the lack of donor resources and reducing the risks of implant rejection. This article presents the results of a two-stage global survey of specialists in tissue engineering on the prospects of bioprinting in preclinical studies and clinical practice. A picture of possible tracks and horizons upon which the implementation of the considered solutions is possible is presented. According to the results of the survey, in the next two decades it will be possible to recreate tissues and organs suitable for implantation and drug testing. There will be a market for bioprinted products, the problem of organ shortages and adverse reactions to drugs will be solved. These changes may significantly affect not only the practice of biomedical research, drug testing, and medicine, but also the healthcare sector in general, which implies the need for a preventive review of current policies. A practical and accessible tool for identifying and interviewing a large number of experts around the world is proposed, which may be useful for new Foresight studies.
AUTHOR Mota, Fabio Batista and Braga, Luiza Amara Maciel and Cabral, Bernardo Pereira and Filho, Carlos Gilbert Conte
Title Future of Bioprinted Tissues аnd Organs: A Two-Wave Global Survey [Abstract]
Year 2022
Journal/Proceedings Foresight and STI Governance
Reftype
DOI/URL URL
Abstract
Technologies of 3D and 4D bioprinting make it possible to restore or replace tissues and organs, solving the problem of the lack of donor resources and reducing the risks of implant rejection. This article presents the results of a two-stage global survey of specialists in tissue engineering on the prospects of bioprinting in preclinical studies and clinical practice. A picture of possible tracks and horizons upon which the implementation of the considered solutions is possible is presented. According to the results of the survey, in the next two decades it will be possible to recreate tissues and organs suitable for implantation and drug testing. There will be a market for bioprinted products, the problem of organ shortages and adverse reactions to drugs will be solved. These changes may significantly affect not only the practice of biomedical research, drug testing, and medicine, but also the healthcare sector in general, which implies the need for a preventive review of current policies. A practical and accessible tool for identifying and interviewing a large number of experts around the world is proposed, which may be useful for new Foresight studies.
AUTHOR Yan Li and Lijing Huang and Guangpin Tai and Feifei Yan and Lin Cai and Chenxing Xin and Shamoon {Al Islam}
Title Graphene Oxide-loaded magnetic nanoparticles within 3D hydrogel form High-performance scaffolds for bone regeneration and tumour treatment [Abstract]
Year 2022
Journal/Proceedings Composites Part A: Applied Science and Manufacturing
Reftype
DOI/URL URL DOI
Abstract
The treatment of tumour-related bone defects should ideally combine bone regeneration with tumour treatment. Additive manufacturing (AM) could feasibly place functional bone-repair materials within composite materials with functional-grade structures, giving them bone repair and anti-tumour effects. Magnetothermal therapy is a promising non-invasive method of tumour treatment that has attracted increasing attention. In this study, we prepared novel hydrogel composite scaffolds of polyvinyl alcohol/sodium alginate/hydroxyapatite (PVA/SA/HA) at low temperature via AM. The scaffolds were loaded with various concentrations of magnetic graphene oxide (MGO) @Fe3O4 nanoparticles. The scaffolds were characterised by fourier transform infrared spectroscopy (FTIR), scanning electron microscope (SEM) and thermal gravimetric analysis (TGA), which showed that the scaffolds have good moulding qualities and strong hydrogen bonding between the MGO/PVA/SA/HA components. TGA analysis demonstrated the expected thermal stability of the MGO and scaffolds. Thermal effects can be adjusted by varying the contents of MGO and the strength of an external alternating magnetic field. The prepared MGO hydrogel composite scaffolds enhance biological functions and support bone mesenchymal stem cell differentiation in vitro. The scaffolds also show favourable anti-tumour characteristics with effective magnetothermal conversion in vivo.
AUTHOR Liu, Chuan and Campbell, Scott B. and Li, Jianzhao and Bannerman, Dawn and Pascual-Gil, Simon and Kieda, Jennifer and Wu, Qinghua and Herman, Peter R. and Radisic, Milica
Title High Throughput Omnidirectional Printing of Tubular Microstructures from Elastomeric Polymers [Abstract]
Year 2022
Journal/Proceedings Advanced Healthcare Materials
Reftype
DOI/URL DOI
Abstract
Abstract Bioelastomers have been extensively used in biomedical applications due to their desirable mechanical strength, tunable properties, and chemical versatility; however, 3D printing bioelastomers into microscale structures has proven elusive. Herein, a high throughput omnidirectional printing approach via coaxial extrusion is described that fabricated perfusable elastomeric microtubes of unprecedently small inner diameter (350-550 μm) and wall thickness (40-60 μm). The versatility of this approach was shown through the printing of two different polymeric elastomers, followed by photocrosslinking and removal of the fugitive inner phase. Designed experiments were used to tune the dimensions and stiffness of the microtubes to match that of native ex vivo rat vasculature. This approach afforded the fabrication of multiple biomimetic shapes resembling cochlea and kidney glomerulus and afforded facile, high-throughput generation of perfusable structures that can be seeded with endothelial cells for biomedical applications. Post-printing laser micromachining was performed to generate numerous micro-sized holes (5-20 μm) in the tube wall to tune microstructure permeability. Importantly, for organ-on-a-chip applications, the described approach took only 3.6 minutes to print microtubes (without microholes) over an entire 96-well plate device, in contrast to comparable hole-free structures that take between 1.5 to 6.5 days to fabricate using a manual 3D stamping approach. This article is protected by copyright. All rights reserved
AUTHOR Bedell, Matthew L. and Torres, Angelica L. and Hogan, Katie J. and Wang, Ziwen and Wang, Bonnie and Melchiorri, Anthony J. and Grande-Allen, K. Jane and Mikos, Antonios G.
Title Human gelatin-based composite hydrogels for osteochondral tissue engineering and their adaptation into bioinks for extrusion, inkjet, and digital light processing bioprinting [Abstract]
Year 2022
Journal/Proceedings Biofabrication
Reftype
DOI/URL DOI
Abstract
The investigation of novel hydrogel systems allows for the study of relationships between biomaterials, cells, and other factors within osteochondral tissue engineering. Three-dimensional (3D) printing is a popular research method that can allow for further interrogation of these questions via the fabrication of 3D hydrogel environments that mimic tissue-specific, complex architectures. However, the adaptation of promising hydrogel biomaterial systems into 3D-printable bioinks remains a challenge. Here, we delineated an approach to that process. First, we characterized a novel methacryloylated gelatin composite hydrogel system and assessed how calcium phosphate and glycosaminoglycan additives upregulated bone- and cartilage-like matrix deposition and certain genetic markers of differentiation within human mesenchymal stem cells (hMSCs), such as RUNX2 and SOX9. Then, new assays were developed and utilized to study the effects of xanthan gum and nanofibrillated cellulose, which allowed for cohesive fiber deposition, reliable droplet formation, and non-fracturing digital light processing (DLP)-printed constructs within extrusion, inkjet, and DLP techniques, respectively. Finally, these bioinks were used to 3D print constructs containing viable encapsulated hMSCs over a 7 d period, where DLP printed constructs facilitated the highest observed increase in cell number over 7 d (∼2.4×). The results presented here describe the promotion of osteochondral phenotypes via these novel composite hydrogel formulations, establish their ability to bioprint viable, cell-encapsulating constructs using three different 3D printing methods on multiple bioprinters, and document how a library of modular bioink additives affected those physicochemical properties important to printability.
AUTHOR Liu, Fengyuan and Quan, Rixiang and Vyas, Cian and Aslan, Enes
Title Hybrid biomanufacturing systems applied in tissue regeneration [Abstract]
Year 2022
Journal/Proceedings International Journal of Bioprinting; Vol 9, No 1 (2023)DO - 10.18063/ijb.v9i1.646
Reftype
DOI/URL URL
Abstract
Scaffold-based approach is a developed strategy in biomanufacturing, which is based on the use of temporary scaffold that performs as a house of implanted cells for their attachment, proliferation, and differentiation. This strategy strongly depends on both materials and manufacturing processes. However, it is very difficult to meet all the requirements, such as biocompatibility, biodegradability, mechanical strength, and promotion of cell-adhesion, using only single material. At present, no single bioprinting technique can meet the requirements for tissue regeneration of all scales. Thus, multi-material and mixing-material scaffolds have been widely investigated. Challenges in terms of resolution, uniform cell distribution, and tissue formation are still the obstacles in the development of bioprinting technique. Hybrid bioprinting techniques have been developed to print scaffolds with improved properties in both mechanical and biological aspects for broad biomedical engineering applications. In this review, we introduce the basic multi-head bioprinters, semi-hybrid and fully-hybrid biomanufacturing systems, highlighting the modifications, the improved properties and the effect on the complex tissue regeneration applications.
AUTHOR Girardeau-Hubert, Sarah and Lynch, Barbara and Zuttion, Francesca and Label, Rabab and Rayee, Chrystelle and Brizion, Sébastien and Ricois, Sylvie and Martinez, Anthony and Park, Eunhye and Kim, Changhwan and Marinho, Paulo André and Shim, Jin-Hyung and Jin, Songwan and Rielland, Maïté and Soeur, Jérémie
Title Impact of microstructure on cell behavior and tissue mechanics in collagen and dermal decellularized extra-cellular matrices [Abstract]
Year 2022
Journal/Proceedings Acta Biomaterialia
Reftype
DOI/URL URL DOI
Abstract
Skin models are used for many applications such as research and development or grafting. Unfortunately, most lack a proper microenvironment producing poor mechanical properties and inaccurate extra-cellular matrix composition and organization. In this report we focused on mechanical properties, extra-cellular matrix organization and cell interactions in human skin samples reconstructed with pure collagen or dermal decellularized extra-cellular matrices (S-dECM) and compared them to native human skin. We found that Full-thickness S-dECM samples presented stiffness two times higher than collagen gel and similar to ex vivo human skin, and proved for the first time that keratinocytes also impact dermal mechanical properties. This was correlated with larger fibers in S-dECM matrices compared to collagen samples and with a differential expression of F-actin, vinculin and tenascin C between S-dECM and collagen samples. This is clear proof of the microenvironment's impact on cell behaviors and mechanical properties. Statement of significance In vitro skin models have been used for a long time for clinical applications or in vitro knowledge and evaluation studies. However, most lack a proper microenvironment producing a poor combination of mechanical properties and appropriate biological outcomes, partly due to inaccurate extra-cellular matrix (ECM) composition and organization. This can lead to limited predictivity and weakness of skin substitutes after grafting. This study shows, for the first time, the importance of a complex and rich microenvironment on cell behaviors, matrix macro- and micro-organization and mechanical properties. The increased composition and organization complexity of dermal skin decellularized extra-cellular matrix populated with differentiated cells produces in vitro skin models closer to native human skin physiology.
AUTHOR Helaehil, Júlia Venturini and Lourenço, Carina Basqueira and Huang, Boyang and Helaehil, Luiza Venturini and de Camargo, Isaque Xavier and Chiarotto, Gabriela Bortolança and Santamaria-Jr, Milton and Bártolo, Paulo and Caetano, Guilherme Ferreira
Title In Vivo Investigation of Polymer-Ceramic PCL/HA and PCL/β-TCP 3D Composite Scaffolds and Electrical Stimulation for Bone Regeneration [Abstract]
Year 2022
Journal/Proceedings Polymers
Reftype
DOI/URL URL DOI
Abstract
Critical bone defects are a major clinical challenge in reconstructive bone surgery. Polycaprolactone (PCL) mixed with bioceramics, such as hydroxyapatite (HA) and tricalcium phosphate (TCP), create composite scaffolds with improved biological recognition and bioactivity. Electrical stimulation (ES) aims to compensate the compromised endogenous electrical signals and to stimulate cell proliferation and differentiation. We investigated the effects of composite scaffolds (PCL with HA; and PCL with β-TCP) and the use of ES on critical bone defects in Wistar rats using eight experimental groups: untreated, ES, PCL, PCL/ES, HA, HA/ES, TCP, and TCP/ES. The investigation was based on histomorphometry, immunohistochemistry, and gene expression analysis. The vascular area was greater in the HA/ES group on days 30 and 60. Tissue mineralization was greater in the HA, HA/ES, and TCP groups at day 30, and TCP/ES at day 60. Bmp-2 gene expression was higher in the HA, TCP, and TCP/ES groups at day 30, and in the TCP/ES and PCL/ES groups at day 60. Runx-2, Osterix, and Osteopontin gene expression were also higher in the TCP/ES group at day 60. These results suggest that scaffolds printed with PCL and TCP, when paired with electrical therapy application, improve bone regeneration.
AUTHOR Wang, Chenmin and Honiball, John Robert and Lin, Junyu and Xia, Xingyu and Lau, Dzi Shing Aaron and Chen, Bo and Deng, Lianfu and Lu, William Weijia
Title Infiltration from Suspension Systems Enables Effective Modulation of 3D Scaffold Properties in Suspension Bioprinting [Abstract]
Year 2022
Journal/Proceedings ACS Appl. Mater. Interfaces
Reftype
DOI/URL DOI
Abstract
Bioprinting is a biofabrication technology which allows efficient and large-scale manufacture of 3D cell culture systems. However, the available biomaterials for bioinks used in bioprinting are limited by their printability and biological functionality. Fabricated constructs are often homogeneous and have limited complexity in terms of current 3D cell culture systems comprising multiple cell types. Inspired by the phenomenon that hydrogels can exchange liquids under the infiltration action, infiltration-induced suspension bioprinting (IISBP), a novel printing technique based on a hyaluronic acid (HA) suspension system to modulate the properties of the printed scaffolds by infiltration action, was described in this study. HA served as a suspension system due to its shear-thinning and self-healing rheological properties, simplicity of preparation, reusability, and ease of adjustment to osmotic pressure. Changes in osmotic pressure were able to direct the swelling or shrinkage of 3D printed gelatin methacryloyl (GelMA)-based bioinks, enabling the regulation of physical properties such as fiber diameter, micromorphology, mechanical strength, and water absorption of 3D printed scaffolds. Human umbilical vein endothelial cells (HUVEC) were applied as a cell culture model and printed within cell-laden scaffolds at high resolution and cell viability with the IISBP technique. Herein, the IISBP technique had been realized as a reliable hydrogel-based bioprinting technique, which enabled facile modulation of 3D printed hydrogel scaffolds properties, being expected to meet the scaffolds requirements of a wide range of cell culture conditions to be utilized in bioprinting applications.
AUTHOR Hou, Yanhao and Wang, Weiguang and Bartolo, Paulo
Title Investigation of polycaprolactone for bone tissue engineering scaffolds: in vitro degradation and biological studies [Abstract]
Year 2022
Journal/Proceedings Materials & Design
Reftype
DOI/URL URL DOI
Abstract
Polycaprolactone (PCL) is one of the most recognized polymeric materials used for bone tissue engineering scaffold fabrication. This study aims to evaluate the effects of the molecular weight (Mn) of PCL on the degradation kinematics, surface, microstructural, thermal, mechanical, and biological properties of 3D printed bone scaffolds. Surface properties were investigated considering water-in-air contact angle and nanoindentation tests, while morphological characteristics and degradation kinematics (accelerated degradation tests) were examined using scanning electron microscopy (SEM), pairing with thermal and mechanical properties monitored at each considered time point. A set of mathematical equations describing the variation of fiber diameter, porosity, mechanical properties, and weight, as a function of molecular weight and degradation time, were obtained based on the experimental results. Human adipose-derived stem cells (hADSCs) proliferation and differentiation tests were also conducted using in vitro colorimetric assay. All results indicated that molecular weight had impacts on the surface, mechanical and biological properties of PCL scaffolds, while no significant effects were observed on the degradation rate. Scaffolds with lower molecular weight presented better bio-mechanical properties. These findings provide useful information for the design of polymeric bone tissue engineering scaffolds.
AUTHOR Kim, Jieun and Lee, Joohyung
Title Liquid-Suspended and Liquid-Bridged Liquid Metal Microdroplets [Abstract]
Year 2022
Journal/Proceedings Small
Reftype
DOI/URL DOI
Abstract
Abstract Liquid metals (LMs) and alloys are attracting increasing attention owing to their combined advantages of high conductivity and fluidity, and have shown promising results in various emerging applications. Patterning technologies using LMs are being actively researched; among them, direct ink writing is considered a potentially viable approach for efficient LM additive manufacturing. However, true LM additive manufacturing with arbitrary printing geometries remains challenging because of the intrinsically low rheological strength of LMs. Herein, colloidal suspensions of LM droplets amenable to additive manufacturing (or “3D printing”) are realized using formulations containing minute amounts of liquid capillary bridges. The resulting LM suspensions exhibit exceptionally high rheological strength with yield stress values well above 103 Pa, attributed to inter-droplet capillary attraction mediated by the liquid bridges adsorbed on the oxide skin of the LM droplets. Such liquid-bridged LM suspensions, as extrudable ink-type filaments, are based on uncurable continuous-phase liquid media, have a long pot-life and outstanding shear-thinning properties, and shape retention, demonstrating excellent rheological processability suitable for 3D printing. These findings will enable the emergence of a variety of new advanced applications that necessitate LM patterning into highly complicated multidimensional structures.
AUTHOR Lai, Jiahui and Wang, Chong and Liu, Jia and Chen, Shangsi and Liu, Chaoyu and Huang, Xiangxuan and Wu, Jing and Pan, Yue and Xie, Yuancai and Wang, Min
Title Low temperature hybrid 3D printing of hierarchically porous bone tissue engineering scaffolds with in situ delivery of osteogenic peptide and mesenchymal stem cells [Abstract]
Year 2022
Journal/Proceedings Biofabrication
Reftype
DOI/URL DOI
Abstract
Compared to other conventional scaffold fabrication techniques, three-dimensional (3D) printing is advantageous in producing bone tissue engineering scaffolds with customized shape, tailored pore size/porosity, required mechanical properties and even desirable biomolecule delivery capability. However, for scaffolds with a large volume, it is highly difficult to get seeded cells to migrate to the central region of the scaffolds, resulting in an inhomogeneous cell distribution and therefore lowering the bone forming ability. To overcome this major obstacle, in this study, cell-laden bone tissue engineering scaffolds consisting of osteogenic peptide (OP) loaded β-tricalcium phosphate (TCP)/poly(lactic-co-glycolic acid) (PLGA) (OP/TCP/PLGA, designated as OTP) nanocomposite struts and rat bone marrow derived mesenchymal stem cell (rBMSC)-laden gelatin/GelMA hydrogel rods were produced through ‘dual-nozzle’ low temperature hybrid 3D printing. The cell-laden scaffolds exhibited a bi-phasic structure and had a mechanical modulus of about 19.6 MPa, which was similar to that of human cancellous bone. OP can be released from the hybrid scaffolds in a sustained manner and achieved a cumulative release level of about 78% after 24 d. rBMSCs encapsulated in the hydrogel rods exhibited a cell viability of about 87.4% right after low temperature hybrid 3D printing and could be released from the hydrogel rods to achieve cell anchorage on the surface of adjacent OTP struts. The OP released from OTP struts enhanced rBMSCs proliferation. Compared to rBMSC-laden hybrid scaffolds without OP incorporation, the rBMSC-laden hybrid scaffolds incorporated with OP significantly up-regulated osteogenic differentiation of rBMSCs by showing a higher level of alkaline phosphatase expression and calcium deposition. This ‘proof-of-concept’ study has provided a facile method to form cell-laden bone tissue engineering scaffolds with not only required mechanical strength, biomimetic structure and sustained biomolecule release profile but also excellent cell delivery capability with uniform cell distribution, which can improve the bone forming ability in the body.
AUTHOR Nadernezhad, Ali and Groll, Jürgen
Title Machine Learning Reveals a General Understanding of Printability in Formulations Based on Rheology Additives [Abstract]
Year 2022
Journal/Proceedings Advanced Science
Reftype
DOI/URL DOI
Abstract
Abstract Hydrogel ink formulations based on rheology additives are becoming increasingly popular as they enable 3-dimensional (3D) printing of non-printable but biologically relevant materials. Despite the widespread use, a generalized understanding of how these hydrogel formulations become printable is still missing, mainly due to their variety and diversity. Employing an interpretable machine learning approach allows the authors to explain the process of rendering printability through bulk rheological indices, with no bias toward the composition of formulations and the type of rheology additives. Based on an extensive library of rheological data and printability scores for 180 different formulations, 13 critical rheological measures that describe the printability of hydrogel formulations, are identified. Using advanced statistical methods, it is demonstrated that even though unique criteria to predict printability on a global scale are highly unlikely, the accretive and collaborative nature of rheological measures provides a qualitative and physically interpretable guideline for designing new printable materials.
AUTHOR Schmieg, Barbara and Gretzinger, Sarah and Schuhmann, Sebastian and Guthausen, Gisela and Hubbuch, Jürgen
Title Magnetic resonance imaging as a tool for quality control in extrusion-based bioprinting [Abstract]
Year 2022
Journal/Proceedings Biotechnology Journal
Reftype
DOI/URL DOI
Abstract
Abstract Bioprinting is gaining importance for the manufacturing of tailor-made hydrogel scaffolds in tissue engineering, pharmaceutical research and cell therapy. However, structure fidelity and geometric deviations of printed objects heavily influence mass transport and process reproducibility. Fast, three-dimensional and nondestructive quality control methods will be decisive for the approval in larger studies or industry. Magnetic resonance imaging (MRI) meets these requirements for characterizing heterogeneous soft materials with different properties. Complementary to the idea of decentralized 3D printing, magnetic resonance tomography is common in medicine, and image data processing tools can be transferred system-independently. In this study, a MRI measurement and image analysis protocol was evaluated to jointly assess the reproducibility of three different hydrogels and a reference material. Critical parameters for object quality, namely porosity, hole areas and deviations along the height of the scaffolds are discussed. Geometric deviations could be correlated to specific process parameters, anomalies of the ink or changes of ambient conditions. This strategy allows the systematic investigation of complex 3D objects as well as an implementation as a process control tool. Combined with the monitoring of metadata this approach might pave the way for future industrial applications of 3D printing in the field of biopharmaceutics.
AUTHOR Włodarczyk-Biegun, Małgorzata K. and Villiou, Maria and Koch, Marcus and Muth, Christina and Wang, Peixi and Ott, Jenna and del Campo, Aranzazu
Title Melt Electrowriting of Graded Porous Scaffolds to Mimic the Matrix Structure of the Human Trabecular Meshwork [Abstract]
Year 2022
Journal/Proceedings ACS Biomaterials Science & Engineering
Reftype
DOI/URL DOI
Abstract
The permeability of the human trabecular meshwork (HTM) regulates eye pressure via a porosity gradient across its thickness modulated by stacked layers of matrix fibrils and cells. Changes in HTM porosity are associated with increases in intraocular pressure and the progress of diseases such as glaucoma. Engineered HTMs could help to understand the structure–function relation in natural tissues and lead to new regenerative solutions. Here, melt electrowriting (MEW) is explored as a biofabrication technique to produce fibrillar, porous scaffolds that mimic the multilayer, gradient structure of native HTM. Poly(caprolactone) constructs with a height of 125–500 μm and fiber diameters of 10–12 μm are printed. Scaffolds with a tensile modulus between 5.6 and 13 MPa and a static compression modulus in the range of 6–360 kPa are obtained by varying the scaffold design, that is, the density and orientation of the fibers and number of stacked layers. Primary HTM cells attach to the scaffolds, proliferate, and form a confluent layer within 8–14 days, depending on the scaffold design. High cell viability and cell morphology close to that in the native tissue are observed. The present work demonstrates the utility of MEW for reconstructing complex morphological features of natural tissues.
AUTHOR Abbasi, Akram and Imaichi, Sachiko and Ling, Vincent and Shukla, Anita
Title Mesenchymal Stem Cell Behavior on Soft Hydrogels with Aligned Surface Topographies [Abstract]
Year 2022
Journal/Proceedings ACS Appl. Bio Mater.
Reftype
DOI/URL DOI
Abstract
Human mesenchymal stem cells (HMSCs) are important for cell-based therapies. However, the success of HMSC therapy requires large-scale in vitro expansion of these multipotent cells. The traditional expansion of HMSCs on tissue-culture-treated stiff polystyrene induces significant changes in their shape, multipotency, and secretome, leading to early senescence and subdued paracrine activity. To enhance their therapeutic potential, here, we have developed two-dimensional soft hydrogels with imprinted microscale aligned grooves for use as HMSC culture substrates. We showed that, depending on the dimensions of the topographical features, these substrates led to lower cellular spreading and cytoskeletal tension, maintaining multipotency and osteogenic and adipogenic differentiate potential, while lowering cellular senescence. We also observed a greater capacity of HMSCs to produce anti-inflammatory cytokines after short-term priming on these hydrogel substrates. Overall, these soft hydrogels with unique surface topography have shown great promise as in vitro culture substrates to maximize the therapeutic potential of HMSCs.
AUTHOR Bucciarelli, Alessio and Petretta, Mauro and Grigolo, Brunella and Gambari, Laura and Bossi, Alessandra Maria and Grassi, Francesco and Maniglio, Devid
Title Methacrylated Silk Fibroin Additive Manufacturing of Shape Memory Constructs with Possible Application in Bone Regeneration [Abstract]
Year 2022
Journal/Proceedings Gels
Reftype
DOI/URL URL DOI
Abstract
Methacrylated silk (Sil-MA) is a chemically modified silk fibroin specifically designed to be crosslinkable under UV light, which makes this material applicable in additive manufacturing techniques and allows the prototyping and development of patient-specific 2D or 3D constructs. In this study, we produced a thin grid structure based on crosslinked Sil-MA that can be withdrawn and ejected and that can recover its shape after rehydration. A complete chemical and physical characterization of Sil-MA was first conducted. Additionally, we tested Sil-MA biocompatibility according to the International Standard Organization protocols (ISO 10993) ensuring the possibility of using it in future trials. Sil-MA was also tested to verify its ability to support osteogenesis. Overall, Sil-MA was shown to be biocompatible and osteoconductive. Finally, two different additive manufacturing technologies, a Digital Light Processing (DLP) UV projector and a pneumatic extrusion technique, were used to develop a Sil-MA grid construct. A proof-of-concept of its shape-memory property was provided. Together, our data support the hypothesis that Sil-MA grid constructs can be injectable and applicable in bone regeneration applications.
AUTHOR Paterson, T. E. and Hagis, N. and Boufidis, D. and Wang, Q. and Moore, S. R. and da Silva, A. C. and Mitchell, R. L. and Alix, J. J. P. and Minev, I. R.
Title Monitoring of hand function enabled by low complexity sensors printed on textile [Abstract]
Year 2022
Journal/Proceedings Flexible and Printed Electronics
Reftype
DOI/URL DOI
Abstract
Development of inexpensive, disposable, use-at-home, personalised health wearables can revolutionise clinical trial design and clinical care. Recent approaches have focused on electronic skins, which are complex systems of sensors and wiring produced by integration of multiple materials and layers. The requirement for high-end clean room microfabrication techniques create challenges for the development of such devices. Drawing inspiration from the ancient art of henna tattoos, where an artist draws designs directly on the hand by extruding a decorative ink, we developed a simple strategy for direct writing (3D printing) of bioelectronic sensors on textile. The sensors are realised using a very limited set of low-cost inks composed only of graphite flakes and silicone. By adapting sensor architectures in two dimensions, we produced electromyography (EMG), strain and pressure sensors. The sensors are printed directly onto stretchable textile (cotton) gloves and function as an integrated multimodal monitoring system for hand function. Gloves demonstrated functionality and stability by recording simultaneous readings of pinch strength, thumb movement (flexion) and EMG of the abductor pollicis brevis muscle over 5 days of daily recordings. Our approach is targeted towards a home based monitoring of hand function, with potential applications across a range of neurological and musculoskeletal conditions.
AUTHOR Sarmin, Atiya M. and El Moussaid, Nadia and Suntornnond, Ratima and Tyler, Eleanor J. and Kim, Yang-Hee and Di Cio, Stefania and Megone, William V. and Pearce, Oliver and Gautrot, Julien E. and Dawson, Jonathan and Connelly, John T.
Title Multi-Scale Analysis of the Composition, Structure, and Function of Decellularized Extracellular Matrix for Human Skin and Wound Healing Models [Abstract]
Year 2022
Journal/Proceedings Biomolecules
Reftype
DOI/URL URL DOI
Abstract
The extracellular matrix (ECM) is a complex mixture of structural proteins, proteoglycans, and signaling molecules that are essential for tissue integrity and homeostasis. While a number of recent studies have explored the use of decellularized ECM (dECM) as a biomaterial for tissue engineering, the complete composition, structure, and mechanics of these materials remain incompletely understood. In this study, we performed an in-depth characterization of skin-derived dECM biomaterials for human skin equivalent (HSE) models. The dECM materials were purified from porcine skin, and through mass spectrometry profiling, we quantified the presence of major ECM molecules, including types I, III, and VI collagen, fibrillin, and lumican. Rheological analysis demonstrated the sol-gel and shear-thinning properties of dECM materials, indicating their physical suitability as a tissue scaffold, while electron microscopy revealed a complex, hierarchical structure of nanofibers in dECM hydrogels. The dECM materials were compatible with advanced biofabrication techniques, including 3D printing within a gelatin microparticle support bath, printing with a sacrificial material, or blending with other ECM molecules to achieve more complex compositions and structures. As a proof of concept, we also demonstrate how dECM materials can be fabricated into a 3D skin wound healing model using 3D printing. Skin-derived dECM therefore represents a complex and versatile biomaterial with advantageous properties for the fabrication of next-generation HSEs.
AUTHOR Daskalakis, Evangelos and Huang, Boyang and Vyas, Cian and Acar, Anil Ahmet and Fallah, Ali and Cooper, Glen and Weightman, Andrew and Koc, Bahattin and Blunn, Gordon and Bartolo, Paulo
Title Novel 3D Bioglass Scaffolds for Bone Tissue Regeneration [Abstract]
Year 2022
Journal/Proceedings Polymers
Reftype
DOI/URL URL DOI
Abstract
The design of scaffolds with optimal biomechanical properties for load-bearing applications is an important topic of research. Most studies have addressed this problem by focusing on the material composition and not on the coupled effect between the material composition and the scaffold architecture. Polymer–bioglass scaffolds have been investigated due to the excellent bioactivity properties of bioglass, which release ions that activate osteogenesis. However, material preparation methods usually require the use of organic solvents that induce surface modifications on the bioglass particles, compromising the adhesion with the polymeric material thus compromising mechanical properties. In this paper, we used a simple melt blending approach to produce polycaprolactone/bioglass pellets to construct scaffolds with pore size gradient. The results show that the addition of bioglass particles improved the mechanical properties of the scaffolds and, due to the selected architecture, all scaffolds presented mechanical properties in the cortical bone region. Moreover, the addition of bioglass indicated a positive long-term effect on the biological performance of the scaffolds. The pore size gradient also induced a cell spreading gradient.
AUTHOR Ahmed, Tanvir
Title Organ-on-a-chip microengineering for bio-mimicking disease models and revolutionizing drug discovery [Abstract]
Year 2022
Journal/Proceedings Biosensors and Bioelectronics: X
Reftype
DOI/URL URL DOI
Abstract
The core of the drug research and screening processes is predicting the effect of drugs prior to human clinical trials. Due to the 2D cell culture and animal models' poor predictability, the cost of drug discovery is continuously rising. The development of organ-on-a-chip technology, an alternative to traditional preclinical drug testing models, resulted from the intersection of microfabrication & tissue engineering. Preclinical safety and effectiveness testing is improved by the ability of organ-on-a-chip technologies to mimic important human physiological functions necessary for understanding drug effects. Organ-on-a-chip could drastically improve the success rate of the preclinical testing thereby better predicting how the drug will act on the clinical trials. Organ-on-a-chip is a term used to describe a microengineered biomimetic device that mimics the structure and functionality of human tissue. It integrates engineering, cell biology, & biomaterial technologies on a miniature platform. To reflect human physiology in vitro and bridge the gap between in vivo and in vitro data, simplification shouldn't compromise physiological relevance. At this level of organ-on-a-chip technological development, biomedical engineers specializing in device engineering are more important than ever to expedite the transfer of technology from the academic lab bench to specialized product development institutions and an ever-growing market. This review focuses on the recent advancements in the organ-on-a-chip technology and discusses the potential of this technology based on the current available literature.
AUTHOR Pazhouhnia, Zahra and Beheshtizadeh, Nima and Namini, Mojdeh Salehi and Lotfibakhshaiesh, Nasrin
Title Portable hand-held bioprinters promote in situ tissue regeneration [Abstract]
Year 2022
Journal/Proceedings Bioengineering & Translational Medicine
Reftype
DOI/URL DOI
Abstract
Abstract Three-dimensional bioprinting, as a novel technique of fabricating engineered tissues, is positively correlated with the ultimate goal of regenerative medicine, which is the restoration, reconstruction, and repair of lost and/or damaged tissue function. The progressive trend of this technology resulted in developing the portable hand-held bioprinters, which could be used quite easily by surgeons and physicians. With the advent of portable hand-held bioprinters, the obstacles and challenges of utilizing statistical bioprinters could be resolved. This review attempts to discuss the advantages and challenges of portable hand-held bioprinters via in situ tissue regeneration. All the tissues that have been investigated by this approach were reviewed, including skin, cartilage, bone, dental, and skeletal muscle regeneration, while the tissues that could be regenerated via this approach are targeted in the authors' perspective. The design and applications of hand-held bioprinters were discussed widely, and the marketed printers were introduced. It has been prospected that these facilities could ameliorate translating the regenerative medicine science from the bench to the bedside actively.
AUTHOR Staubli, Flurina and Stoddart, Martin J. and D'Este, Matteo and Schwab, Andrea
Title Pre-culture of human mesenchymal stromal cells in spheroids facilitates chondrogenesis at a low total cell count upon embedding in biomaterials to generate cartilage microtissues [Abstract]
Year 2022
Journal/Proceedings Acta Biomaterialia
Reftype
DOI/URL URL DOI
Abstract
Material-assisted cartilage tissue engineering has limited application in cartilage treatment due to hypertrophic tissue formation and high cell counts required. This study aimed at investigating the potential of human mesenchymal stromal cell (hMSC) spheroids embedded in biomaterials to study the effect of biomaterial composition on cell differentiation. Pre-cultured (3 days, chondrogenic differentiation media) spheroids (250 cells/spheroid) were embedded in tyramine-modified hyaluronic acid (THA) and collagen type I (Col) composite hydrogels (four combinations of THA (12.5 vs 16.7 mg/ml) and Col (2.5 vs 1.7 mg/ml) content) at a cell density of 5 × 106 cells/ml (2 × 104 spheroids/ml). Macropellets derived from single hMSCs (2.5 × 105 cells, ScMP) or hMSC spheroids (2.5 × 105 cells, 103 spheroids, SpMP) served as control. hMSC differentiation was analyzed using glycosaminoglycan (GAG) quantification, gene expression analysis and (immuno-)histology. Embedding of hMSC spheroids in THA-Col induced chondrogenic differentiation marked by upregulation of aggrecan (ACAN) and COL2A1, and the production of GAGs . Lower THA led to more pronounced chondrogenic phenotype compared to higher THA content. Col content had no significant influence on hMSC chondrogenesis. Pellet cultures showed an upregulation in chondrogenic-associated genes and production of GAGs with less upregulation of hypertrophic-associated genes in SpMP culture compared to ScMP group. This study presents hMSC pre-culture in spheroids as promising approach to study chondrogenic differentiation after biomaterial encapsulation at low total cell count (5 × 106/ml) without compromising chondrogenic matrix production. This approach can be applied to assemble microtissues in biomaterials to generate large cartilage construct. Statement of significance In vitro studies investigating the chondrogenic potential of biomaterials are limited due to the low cell-cell contact of encapsulated single cells. Here, we introduce the use of pre-cultured hMSC spheroids to study chondrogenesis upon encapsulation in a biomaterial. The use of spheroids takes advantage of the high cell-cell contact within each spheroid being critical in the early chondrogenesis of hMSCs. At a low seeding density of 5·106 cells/ml (2 × 104 spheroids/ml) we demonstrated hMSC chondrogenesis and cartilaginous matrix deposition. Our results indicate that the pre-culture might have a beneficial effect on hypertrophic gene expression without compromising chondrogenic differentiation. This approach has shown potential to assemble microtissues (here spheroids) in biomaterials to generate large cartilage constructs and to study the effect of biomaterial composition on cell alignment and migration.
AUTHOR Rupp, Harald and Bhandary, Rajesh and Kulkarni, Amit and Binder, Wolfgang
Title Printable Electrolytes: Tuning 3D-Printing by Multiple Hydrogen Bonds and Added Inorganic Lithium-Salts [Abstract]
Year 2022
Journal/Proceedings Advanced Materials Technologies
Reftype
DOI/URL DOI
Abstract
Abstract Here, the 3D-printing of supramolecular polymer electrolytes is reported, able to be manufactured via 3D-printing processes, additionally dynamically compensating for volume changes. A careful mechanical design, in addition to rheological effects observed for different additives to the electrolyte, is investigated and adjusted, in order to achieve printability via an extrusion process to generate a conductive electrode material. Qudruple-hydrogen bonds (UPy) act as supramolecular entities for the desired dynamic properties to adjust printability, in addition to added LiTFSi-salts to achieve ionic conductivities of ≈10–4 S cm–1 at T = 80 °C. Three different telechelic UPy-PEO/PPO-UPy-polymers with molecular weights ranging from Mn = 600–1500 g mol−1 were investigated in view of their 3D-printability by FDM-processes. It is found that there are three effects counterbalancing the rheological properties of the polymers: besides temperatures, which can be used as a known tool to adjust melt-rheology, also the addition of lithium-salts in junction with the polymers crystallinity exerts a major toolbox to 3D-print these electrolytes. Using specific compositions with Li/EO-ratios from 20:1, 10:1, and 5:1, the rheological profile can be adjusted to reach the required printability window. AT-IR-investigations clearly indicate a weakening of the UPy-bonds by the added Li+ ions, in addition to a reduction of the crystallinity of the PEO-units, further changing the rheological profile. The so generated electrolytes are printable systems for novel electrolytes.
AUTHOR Pai, Roopesh R. and Ajit, Shilpa and Sekar J, Anupama and Nair, Sarath S. and Anil Kumar, P. R. and Velayudhan, Shiny
Title Radical scavenging gelatin methacrylamide based bioink formulation for three dimensional bioprinting of parenchymal liver construct [Abstract]
Year 2022
Journal/Proceedings Bioprinting
Reftype
DOI/URL URL DOI
Abstract
Methacrylated gelatin (GelMA) in the form of methacryloyl, methacrylate, and methacrylamide is an established and widely accepted photocrosslinkable bioink, for three dimensional bioprinting of various tissues. One of the limitations of photocrosslinkable bioinks is the inability to control the free radicals generated by photoinitiators and ultraviolet (UV) rays. The presence of excess free radicals compromises the viability and functionality of cells during crosslinking. In this study, ascorbic acid, a known free radical scavenger (FRS) molecule, was introduced into the GelMA bioink formulation to protect the cell viability, proliferation, and tissue functions of 3D bioprinted parenchymal liver constructs. The concentration of FRS in the bioink was optimized and used for 3D bioprinting of HepG2 cells. The results confirmed that the inclusion of 3.4 mM FRS in the GelMA bioink formulation nullified the excess ROS formed inside the cells. Furthermore, the optimized GelMA formulation containing FRS preserved and improved the cell activity, albumin, and urea synthesis in the 3D construct over 7 days in culture. In the future, this concept could be implemented in the biofabrication of large liver constructs that require multiple or longer durations of UV irradiation.
AUTHOR Trossmann, Vanessa T. and Heltmann-Meyer, Stefanie and Amouei, Hanna and Wajant, Harald and Horch, Raymund E. and Steiner, Dominik and Scheibel, Thomas
Title Recombinant Spider Silk Bioinks for Continuous Protein Release by Encapsulated Producer Cells [Abstract]
Year 2022
Journal/Proceedings Biomacromolecules
Reftype
DOI/URL DOI
Abstract
Targeted therapies using biopharmaceuticals are of growing clinical importance in disease treatment. Currently, there are several limitations of protein-based therapeutics (biologicals), including suboptimal biodistribution, lack of stability, and systemic side effects. A promising approach to overcoming these limitations could be a therapeutic cell-loaded 3D construct consisting of a suitable matrix component that harbors producer cells continuously secreting the biological of interest. Here, the recombinant spider silk proteins eADF4(C16), eADF4(C16)-RGD, and eADF4(C16)-RGE have been processed together with HEK293 producer cells stably secreting the highly traceable reporter biological TNFR2-Fc-GpL, a fusion protein consisting of the extracellular domain of TNFR2, the Fc domain of human IgG1, and the luciferase of Gaussia princeps as a reporter domain. eADF4(C16) and eADF4(C16)-RGD hydrogels provide structural and mechanical support, promote HEK293 cell growth, and allow fusion protein production by the latter. Bioink-captured HEK293 producer cells continuously release functional TNFR2-Fc-GpL over 14 days. Thus, the combination of biocompatible, printable spider silk bioinks with drug-producing cells is promising for generating implantable 3D constructs for continuous targeted therapy.
AUTHOR Wang, Ruiqi and Deng, Shuai and Wu, Yuping and Wei, Haiying and Jing, Guangping and Zhang, Bosong and Liu, Fengzhen and Tian, Hui and Chen, Xiongbiao and Tian, Weiming
Title Remodelling 3D printed GelMA-HA corneal scaffolds by cornea stromal cells [Abstract]
Year 2022
Journal/Proceedings Colloid and Interface Science Communications
Reftype
DOI/URL URL DOI
Abstract
Engineering scaffolds with a structure mimicking that of native cornea allows for addressing the severe donor shortage for the corneal blindness treatment, which, however, remains challenging. In the light that corneal stromal (CS) cells can play a key role in corneal stroma formation, in this study we incorporated CS cells into three-dimensional (3D) scaffolds printed from hyaluronic acid-modified gelatin-methacrylate (GelMA-HA) scaffolds and characterized the scaffolds in terms of remodeled extracellular matrix (ECM) in vitro. Our results illustrated that the modification of GelMA by HA allowed for 3D printing of corneal scaffolds and further improved the characteristics of primary rabbit-derived corneal stromal cells for remodelling scaffolds. After 60 days, we decellularized the remodeled corneal scaffolds and examined their optical properties; and our results demonstrated that the 3D printed corneal scaffolds provided CS cells with cues that guided them toward the directional and spatial organization and facilitated the ECM remodelling.
AUTHOR Betancourt, Nicholas and Chen, Xiongbiao
Title Review of extrusion-based multi-material bioprinting processes [Abstract]
Year 2022
Journal/Proceedings Bioprinting
Reftype
DOI/URL URL DOI
Abstract
Scaffold-based tissue engineering aims to provide patients with permanent solutions to damaged organs and tissues based on engineered scaffolds. For this, extrusion-based bioprinting has drawn considerable attention for scaffold fabrication due to its ability to print a variety of biomaterials or their mixtures with living cells, as well as its simple construction and operation. Incorporating multiple materials is essential, yet challenging, in the bioprinting process to mimic the heterogeneous and anisotropic structure and properties of native tissue. This paper reviews the extrusion-based bioprinting process that employs varying approaches or mechanisms to print multiple materials and living cells, including side-by-side printing, core-and-shell printing, and recently developed advanced bioprinting methods. Key issues in this research area are also identified and discussed, along with recommendations for future research.
AUTHOR Eichholz, Kian and Freeman, Fiona and Pitacco, Pierluca and Nulty, Jessica and Ahern, Daniel and Burdis, Ross and Browe, David and Garcia, Orquidea and Hoey, David and Kelly, Daniel John
Title Scaffold microarchitecture regulates angiogenesis and the regeneration of large bone defects [Abstract]
Year 2022
Journal/Proceedings Biofabrication
Reftype
DOI/URL DOI
Abstract
Emerging 3D printing technologies can provide exquisite control over the external shape and internal architecture of scaffolds and tissue engineered constructs, enabling systematic studies to explore how geometric design features influence the regenerative process. Here we used fused deposition modelling (FDM) and melt electrowriting (MEW) to investigate how scaffold microarchitecture influences the healing of large bone defects. FDM was used to fabricate scaffolds with relatively large fibre diameters and low porosities, while MEW was used to fabricate scaffolds with smaller fibre diameters and higher porosities, with both scaffolds being designed to have comparable surface areas. Scaffold microarchitecture significantly influenced the healing response following implantation into critically sized femoral defects in rats, with the FDM scaffolds supporting the formation of larger bone spicules through its pores, while the MEW scaffolds supported the formation of a more round bone front during healing. After 12 weeks in vivo, both MEW and FDM scaffolds supported significantly higher levels of defect vascularisation compared to empty controls, while the MEW scaffolds supported higher levels of new bone formation. Somewhat surprisingly, this superior healing in the MEW group did not correlate with higher levels of angiogenesis, with the FDM scaffold supporting greater total vessel formation and the formation of larger vessels, while the MEW scaffold promoted the formation of a dense microvasculature with minimal evidence of larger vessels infiltrating the defect region. To conclude, the small fibre diameter, high porosity and high specific surface area of the MEW scaffold proved beneficial for osteogenesis and bone regeneration, demonstrating that changes in scaffold architecture enabled by this additive manufacturing technique can dramatically modulate angiogenesis and tissue regeneration without the need for complex exogenous growth factors. These results provide a valuable insight into the importance of 3D printed scaffold architecture when developing new bone tissue engineering strategies.
AUTHOR Tan, Xuan Hao and Liu, Ling and Mitryashkin, Alexander and Wang, Yunyun and Goh, James Cho Hong
Title Silk Fibroin as a Bioink - A Thematic Review of Functionalization Strategies for Bioprinting Applications [Abstract]
Year 2022
Journal/Proceedings ACS Biomater. Sci. Eng.
Reftype
DOI/URL DOI
Abstract
Bioprinting is an emerging tissue engineering technique that has attracted the attention of researchers around the world, for its ability to create tissue constructs that recapitulate physiological function. While the technique has been receiving hype, there are still limitations to the use of bioprinting in practical applications, much of which is due to inappropriate bioink design that is unable to recapitulate complex tissue architecture. Silk fibroin (SF) is an exciting and promising bioink candidate that has been increasingly popular in bioprinting applications because of its processability, biodegradability, and biocompatibility properties. However, due to its lack of optimum gelation properties, functionalization strategies need to be employed so that SF can be effectively used in bioprinting applications. These functionalization strategies are processing methods which allow SF to be compatible with specific bioprinting techniques. Previous literature reviews of SF as a bioink mainly focus on discussing different methods to functionalize SF as a bioink, while a comprehensive review on categorizing SF functional methods according to their potential applications is missing. This paper seeks to discuss and compartmentalize the different strategies used to functionalize SF for bioprinting and categorize the strategies for each bioprinting method (namely, inkjet, extrusion, and light-based bioprinting). By compartmentalizing the various strategies for each printing method, the paper illustrates how each strategy is better suited for a target tissue application. The paper will also discuss applications of SF bioinks in regenerating various tissue types and the challenges and future trends that SF can take in its role as a bioink material.
AUTHOR Liu, Jing and Zhou, Zhengtong and Zhang, Min and Song, Feng and Feng, Chong and Liu, Haochen
Title Simple and robust 3D bioprinting of full-thickness human skin tissue [Abstract]
Year 2022
Journal/Proceedings Bioengineered
Reftype
DOI/URL DOI
Abstract
ABSTRACTArtificial skins have been used as skin substitutes for wound healing in the clinic, and as in vitro models for safety assessment in cosmetic and pharmaceutical industries. The three-dimensional (3D) bioprinting technique provides a promising strategy in the fabrication of artificial skins. Despite the technological advances, many challenges remain to be conquered, such as the complicated preparation conditions for bio-printed skin and the unavailability of stability and robustness of skin bioprinting. Here, we formulated a novel bio-ink composed of gelatin, sodium alginate and fibrinogen. By optimizing the ratio of components in the bio-ink, the design of the 3D model and the printing conditions, a fibroblasts-containing dermal layer construct was firstly fabricated, on the top of which laminin and keratinocytes were sequentially placed. Through air-liquid interface (ALI) culture by virtue of sterile wire mesh, a full-thickness skin tissue was thus prepared. HE and immunofluorescence staining showed that the bio-printed skin was not only morphologically representative of the human skin, but also expressed the specific markers related to epidermal differentiation and stratum corneum formation. The presented easy and robust preparation of full-thickness skin constructs provides a powerful tool for the establishment of artificial skins, holding critical academic significance and application value.
AUTHOR Constante, Gissela and Apsite, Indra and Auerbach, Paul and Aland, Sebastian and Schönfeld, Dennis and Pretsch, Thorsten and Milkin, Pavel and Ionov, Leonid
Title Smart Mechanically Tunable Surfaces with Shape Memory Behavior and Wetting-Programmable Topography [Abstract]
Year 2022
Journal/Proceedings ACS Appl. Mater. Interfaces
Reftype
DOI/URL DOI
Abstract
This paper reports for the first time the fabrication and investigation of wetting properties of structured surfaces formed by lamellae with an exceptionally high aspect ratio of up to 57:1 and more. The lamellar surfaces were fabricated using a polymer with tunable mechanical properties and shape-memory behavior. It was found that wetting properties of such structured surfaces depend on temperature, and thermal treatment history-structured surfaces are wetted easier at elevated temperature or after cooling to room temperature when the polymer is soft because of the easier deformability of lamellae. The shape of lamellae deformed by droplets can be temporarily fixed at low temperature and remains fixed upon heating to room temperature. Heating above the transition temperature of the shape-memory polymer restores the original shape. The high aspect ratio allows tuning of geometry not only manually, as it is done in most works reported previously but can also be made by a liquid droplet and is controlled by temperature. This behavior opens new opportunities for the design of novel smart elements for microfluidic devices such as smart valves, whose state and behavior can be switched by thermal stimuli: valves that can or cannot be opened that are able to close or can be fixed in an open or closed states.
AUTHOR Burdis, Ross and Chariyev-Prinz, Farhad and Browe, David C. and Freeman, Fiona E. and Nulty, Jessica and McDonnell, Emily E. and Eichholz, Kian F. and Wang, Bin and Brama, Pieter and Kelly, Daniel J.
Title Spatial patterning of phenotypically distinct microtissues to engineer osteochondral grafts for biological joint resurfacing [Abstract]
Year 2022
Journal/Proceedings Biomaterials
Reftype
DOI/URL URL DOI
Abstract
Modular biofabrication strategies using microtissues or organoids as biological building blocks have great potential for engineering replacement tissues and organs at scale. Here we describe the development of a biofabrication strategy to engineer osteochondral tissues by spatially localising phenotypically distinct cartilage microtissues within an instructive 3D printed polymer framework. We first demonstrate that immature cartilage microtissues can spontaneously fuse to form homogeneous macrotissues, and that combining less cellular microtissues results in superior fusion and the generation of a more hyaline-like cartilage containing higher levels of sulphated glycosaminoglycans and type II collagen. Furthermore, temporally exposing developing microtissues to transforming growth factor-β accelerates their volumetric growth and subsequent capacity to fuse into larger hyaline cartilage grafts. Next, 3D printed polymeric frameworks are used to further guide microtissue fusion and the subsequent self-organisation process, resulting in the development of a macroscale tissue with zonal collagen organisation analogous to the structure seen in native articular cartilage. To engineer osteochondral grafts, hypertrophic cartilage microtissues are engineered as bone precursor tissues and spatially localised below phenotypically stable cartilage microtissues. Implantation of these engineered grafts into critically-sized caprine osteochondral defects results in effective defect stabilisation and histologically supports the restoration of a more normal articular surface after 6 months in vivo. These findings support the use of such modular biofabrication strategies for biological joint resurfacing.
AUTHOR Hatt, Luan P. and Armiento, Angela R. and Mys, Karen and Thompson, Keith and Hildebrand, Maria and Nehrbass, Dirk and Müller, Werner E. G. and Zeiter, Stephan and Eglin, David and Stoddart, Martin J.
Title Standard in vitro evaluations of engineered bone substitutes are not sufficient to predict in vivo preclinical model outcomes [Abstract]
Year 2022
Journal/Proceedings Acta Biomaterialia
Reftype
DOI/URL URL DOI
Abstract
Understanding the optimal conditions required for bone healing can have a substantial impact to target the problem of non–unions and large bone defects. The combination of bioactive factors, regenerative progenitor cells and biomaterials to form a tissue engineered (TE) complex is a promising solution but translation to the clinic has been slow. We hypothesized the typical material testing algorithm used is insufficient and leads to materials being mischaracterized as promising. In the first part of this study, human bone marrow – derived mesenchymal stromal cells (hBM-MSCs) were embedded in three commonly used biomaterials (hyaluronic acid methacrylate, gelatin methacrylate and fibrin) and combined with relevant bioactive osteogenesis factors (dexamethasone microparticles and polyphosphate nanoparticles) to form a TE construct that underwent in vitro osteogenic differentiation for 28 days. Gene expression of relevant transcription factors and osteogenic markers, and von Kossa staining were performed. In the second and third part of this study, the same combination of TE constructs were implanted subcutaneously (cell containing) in T cell-deficient athymic Crl:NIH-Foxn1rnu rats for 8 weeks or cell free in an immunocompetent New Zealand white rabbit calvarial model for 6 weeks, respectively. Osteogenic performance was investigated via MicroCT imaging and histology staining. The in vitro study showed enhanced upregulation of relevant genes and significant mineral deposition within the three biomaterials, generally considered as a positive result. Subcutaneous implantation indicates none to minor ectopic bone formation. No enhanced calvarial bone healing was detected in implanted biomaterials compared to the empty defect. The reasons for the poor correlation of in vitro and in vivo outcomes are unclear and needs further investigation. This study highlights the discrepancy between in vitro and in vivo outcomes, demonstrating that in vitro data should be interpreted with extreme caution. In vitro models with higher complexity are necessary to increase value for translational studies. Statement of significance Preclinical testing of newly developed biomaterials is a crucial element of the development cycle. Despite this, there is still significant discrepancy between in vitro and in vivo test results. Within this study we investigate multiple combinations of materials and osteogenic stimulants and demonstrate a poor correlation between the in vitro and in vivo data. We propose rationale for why this may be the case and suggest a modified testing algorithm.
AUTHOR Ma, Jiayi and Wu, Siyu and Liu, Jun and Liu, Chun and Ni, Su and Dai, Ting and Wu, Xiaoyu and Zhang, Zhenyu and Qu, Jixin and Zhao, Hongbin and Zhou, Dong and Zhao, Xiubo
Title Synergistic effects of nanoattapulgite and hydroxyapatite on vascularization and bone formation in a rabbit tibia bone defect model [Abstract]
Year 2022
Journal/Proceedings Biomater. Sci.
Reftype
DOI/URL DOI
Abstract
Hydroxyapatite (HA) is a promising scaffold material for the treatment of bone defects. However{,} the lack of angiogenic properties and undesirable mechanical properties (such as fragility) limits the application of HA. Nanoattapulgite (ATP) is a nature-derived clay mineral and has been proven to be a promising bioactive material for bone regeneration due to its ability to induce osteogenesis. In this study{,} polyvinyl alcohol/collagen/ATP/HA (PVA/COL/ATP/HA) scaffolds were printed. Mouse bone marrow mesenchymal stem/stromal cells (BMSCs) and human umbilical vein endothelial cells (HUVECs) were used in vitro to assess the biocompatibility and the osteogenesis and vascularization induction potentials of the scaffolds. Subsequently{,} in vivo micro-CT and histological staining were carried out to evaluate new bone formation in a rabbit tibial defect model. The in vitro results showed that the incorporation of ATP increased the printing fidelity and mechanical properties{,} with values of compressive strengths up to 200% over raw PC-H scaffolds. Simultaneously{,} the expression levels of osteogenic-related genes and vascularization-related genes were significantly increased after the incorporation of ATP. The in vivo results showed that the PVA/COL/ATP/HA scaffolds exhibited synergistic effects on promoting vascularization and bone formation. The combination of ATP and HA provides a promising strategy for vascularized bone tissue engineering.
AUTHOR Ramezani Dana, Hossein and Ebrahimi, Farnoosh
Title Synthesis, properties, and applications of polylactic acid-based polymers [Abstract]
Year 2022
Journal/Proceedings Polymer Engineering & Science
Reftype
DOI/URL DOI
Abstract
Abstract Polylactic acid (PLA) is known as one of the greatest promising bioabsorbable and compostable polyesters with the capability of high molecular weight synthesis. Lactic acid condensation, azeotropic dehydration, and condensation ring-open polymerize of lactide are three methods for PLA polymerization. Comprehension of material properties is critical for choosing the right processing method and adjusting PLA characteristics. A variety of mechanical properties of this material, from soft and elastic to stiff and high strength makes PLA suitable for a wide range of applications. Besides, PLA can be blended or copolymerized with other polymeric or non-polymeric substances. Thus, this polymer can achieve suitable chemical, mechanical, and rheological properties. Understanding the role of these properties and selecting a suitable processing technique is necessary for its intended consumer and various applications. This study elaborated a general summary of the polymerization, processing, and characteristics of PLA (i.e., structural diversities, rheological performances, mechanical properties, and permeability). Besides, this work presented some information regarding essential factors that can be used for modifying PLA properties to address the requirements for various applications such as biomedical, food packing, biocomposite, and additive manufacturing.
AUTHOR Salar Amoli, Mehdi and Anand, Resmi and EzEldeen, Mostafa and Amorim, Paulo Alexandre and Geris, Liesbet and Jacobs, Reinhilde and Bloemen, Veerle
Title The development of a 3D printable chitosan-based copolymer with tunable properties for dentoalveolar regeneration [Abstract]
Year 2022
Journal/Proceedings Carbohydrate Polymers
Reftype
DOI/URL URL DOI
Abstract
Dentoalveolar tissue engineering is an emerging yet challenging field, considering the lack of suitable materials and difficulty to produce patient-specific hydrogel scaffolds. The present paper aims to produce a 3D printable and tuneable biomaterial by copolymerizing a synthesized water-soluble chitosan derivative called maleic anhydride grafted chitosan (MA-C) with gelatin using genipin, a natural crosslinking agent. Development and testing of this material for 3D printing, degradation, and swelling demonstrated the ability to fabricate scaffolds with controlled physical properties based on pre-determined designs. The MA-C-gelatin copolymer demonstrated excellent biocompatibility, which was verified by analyzing the viability, growth and proliferation of human dental pulp stem cells seeded on MA-C-gelatin constructs through live/dead, alamar blue and DNA quantification assays. Based on the present findings, the proposed material might be a suitable candidate for dentoalveolar tissue engineering, while further research is required to achieve this goal.
AUTHOR Yu, Haiyang and Gong, Wen and Mei, Junhao and Qin, Lihao and Piao, Zeyu and You, Deshu and Gu, Wenxian and Jia, Zhongzhi
Title The efficacy of a paeoniflorin-sodium alginate-gelatin skin scaffold for the treatment of diabetic wound: An in vivo study in a rat model [Abstract]
Year 2022
Journal/Proceedings Biomedicine & Pharmacotherapy
Reftype
DOI/URL URL DOI
Abstract
Objective To investigate the efficacy of a paeoniflorin-sodium alginate (SA)-gelatin skin scaffold for treating diabetic wound in a rat model. Methods Bioinks were prepared using various percentages of paeoniflorin in the total weight of a solution containing SA and gelatin. Skin scaffolds containing 0%, 1%, 3%, 5%, and 10% paeoniflorin were printed using 3D bioprinting technology, and scaffold microstructure was observed with scanning electron microscopy. Skin scaffolds were then used in rats with diabetic wounds. H&E staining, Masson staining, and immunohistochemical staining for IL-1β and CD31 were performed on days 7 and 14. Results All skin scaffolds had a mesh-like structure with uniform pore distribution. Wounds healed well in each group, with the 1% and 3% groups demonstrating the most complete healing. H&E staining showed that skin accessory organs had appeared in each group. On day 7, collagen deposition in the 3% group was higher than in the other groups (P<0.05), and IL-1β infiltration was lower in the 10% group than in the 3% group (P = 0.002). On day 14, IL-1β infiltration was not significantly different between the 10% and 3% groups (P = 0.078). The CD31 level was higher in the 3% group than in the other groups on days 7 and 14 (P<0.05). Conclusion A 3% paeoniflorin-SA-gelatin skin scaffold promoted the healing of diabetic wounds in rats. This scaffold promoted collagen deposition and microvascular regeneration and demonstrated anti-inflammatory properties, suggesting that this scaffold type could be used to treat diabetic wounds.
AUTHOR Bácskay, Ildikó and Ujhelyi, Zoltán and Fehér, Pálma and Arany, Petra
Title The Evolution of the 3D-Printed Drug Delivery Systems: A Review [Abstract]
Year 2022
Journal/Proceedings Pharmaceutics
Reftype
DOI/URL URL DOI
Abstract
Since the appearance of the 3D printing in the 1980s it has revolutionized many research fields including the pharmaceutical industry. The main goal is to manufacture complex, personalized products in a low-cost manufacturing process on-demand. In the last few decades, 3D printing has attracted the attention of numerous research groups for the manufacturing of different drug delivery systems. Since the 2015 approval of the first 3D-printed drug product, the number of publications has multiplied. In our review, we focused on summarizing the evolution of the produced drug delivery systems in the last 20 years and especially in the last 5 years. The drug delivery systems are sub-grouped into tablets, capsules, orodispersible films, implants, transdermal delivery systems, microneedles, vaginal drug delivery systems, and micro- and nanoscale dosage forms. Our classification may provide guidance for researchers to more easily examine the publications and to find further research directions.
AUTHOR Tutty, Melissa Anne and Movia, Dania and Prina-Mello, Adriele
Title Three-dimensional (3D) liver cell models - a tool for bridging the gap between animal studies and clinical trials when screening liver accumulation and toxicity of nanobiomaterials [Abstract]
Year 2022
Journal/Proceedings Drug Delivery and Translational Research
Reftype Tutty2022
DOI/URL DOI
Abstract
Despite the exciting properties and wide-reaching applications of nanobiomaterials (NBMs) in human health and medicine, their translation from bench to bedside is slow, with a predominant issue being liver accumulation and toxicity following systemic administration. In vitro 2D cell-based assays and in vivo testing are the most popular and widely used methods for assessing liver toxicity at pre-clinical stages; however, these fall short in predicting toxicity for NBMs. Focusing on in vitro and in vivo assessment, the accurate prediction of human-specific hepatotoxicity is still a significant challenge to researchers. This review describes the relationship between NBMs and the liver, and the methods for assessing toxicity, focusing on the limitations they bring in the assessment of NBM hepatotoxicity as one of the reasons defining the poor translation for NBMs. We will then present some of the most recent advances towards the development of more biologically relevant in vitro liver methods based on tissue-mimetic 3D cell models and how these could facilitate the translation of NBMs going forward. Finally, we also discuss the low public acceptance and limited uptake of tissue-mimetic 3D models in pre-clinical assessment, despite the demonstrated technical and ethical advantages associated with them.
AUTHOR Anderson, Margaret and Dubey, Nileshkumar and Bogie, Kath and Cao, Chen and Li, Junying and Lerchbacker, Joseph and Mendonça, Gustavo and Kauffmann, Frederic and Bottino, Marco C. and Kaigler, Darnell
Title Three-dimensional printing of clinical scale and personalized calcium phosphate scaffolds for alveolar bone reconstruction [Abstract]
Year 2022
Journal/Proceedings Dental Materials
Reftype
DOI/URL URL DOI
Abstract
Objective Alveolar bone defects can be highly variable in their morphology and, as the defect size increases, they become more challenging to treat with currently available therapeutics and biomaterials. This investigation sought to devise a protocol for fabricating customized clinical scale and patient-specific, bioceramic scaffolds for reconstruction of large alveolar bone defects. Methods Two types of calcium phosphate (CaP)-based bioceramic scaffolds (alginate/β-TCP and hydroxyapatite/α-TCP, hereafter referred to as hybrid CaP and Osteoink™, respectively) were designed, 3D printed, and their biocompatibility with alveolar bone marrow stem cells and mechanical properties were determined. Following scaffold optimization, a workflow was developed to use cone beam computed tomographic (CBCT) imaging to design and 3D print, defect-specific bioceramic scaffolds for clinical-scale bone defects. Results Osteoink™ scaffolds had the highest compressive strength when compared to hybrid CaP with different infill orientation. In cell culture medium, hybrid CaP degradation resulted in decreased pH (6.3) and toxicity to stem cells; however, OsteoInk™ scaffolds maintained a stable pH (7.2) in culture and passed the ISO standard for cytotoxicity. Finally, a clinically feasible laboratory workflow was developed and evaluated using CBCT imaging to engineer customized and defect-specific CaP scaffolds using OsteoInk™. It was determined that printed scaffolds had a high degree of accuracy to fit the respective clinical defects for which they were designed (0.27 mm morphological deviation of printed scaffolds from digital design). Significance From patient to patient, large alveolar bone defects are difficult to treat due to high variability in their complex morphologies and architecture. Our findings shows that Osteoink™ is a biocompatible material for 3D printing of clinically acceptable, patient-specific scaffolds with precision-fit for use in alveolar bone reconstructive procedures. Collectively, emerging digital technologies including CBCT imaging, 3D surgical planning, and (bio)printing can be integrated to address this unmet clinical challenge.
AUTHOR Demirörs, Ahmet F. and Poloni, Erik and Chiesa, Maddalena and Bargardi, Fabio L. and Binelli, Marco R. and Woigk, Wilhelm and de Castro, Lucas D. C. and Kleger, Nicole and Coulter, Fergal B. and Sicher, Alba and Galinski, Henning and Scheffold, Frank and Studart, André R.
Title Three-dimensional printing of photonic colloidal glasses into objects with isotropic structural color [Abstract]
Year 2022
Journal/Proceedings Nature Communications
Reftype Demirörs2022
DOI/URL DOI
Abstract
Structural color is frequently exploited by living organisms for biological functions and has also been translated into synthetic materials as a more durable and less hazardous alternative to conventional pigments. Additive manufacturing approaches were recently exploited for the fabrication of exquisite photonic objects, but the angle-dependence observed limits a broader application of structural color in synthetic systems. Here, we propose a manufacturing platform for the 3D printing of complex-shaped objects that display isotropic structural color generated from photonic colloidal glasses. Structurally colored objects are printed from aqueous colloidal inks containing monodisperse silica particles, carbon black, and a gel-forming copolymer. Rheology and Small-Angle-X-Ray-Scattering measurements are performed to identify the processing conditions leading to printed objects with tunable structural colors. Multimaterial printing is eventually used to create complex-shaped objects with multiple structural colors using silica and carbon as abundant and sustainable building blocks.
AUTHOR Barceló, Xavier and Eichholz, Kian F. and Garcia, Orquidea and Kelly, Daniel J.
Title Tuning the Degradation Rate of Alginate-Based Bioinks for Bioprinting Functional Cartilage Tissue [Abstract]
Year 2022
Journal/Proceedings Biomedicines
Reftype
DOI/URL URL DOI
Abstract
Negative foreign body responses following the in vivo implantation of bioprinted implants motivate the development of novel bioinks which can rapidly degrade with the formation of functional tissue, whilst still maintaining desired shapes post-printing. Here, we investigated the oxidation of alginate as a means to modify the degradation rate of alginate-based bioinks for cartilage tissue engineering applications. Raw and partially oxidized alginate (OA) were combined at different ratios (Alginate:OA at 100:0; 75:25; 50:50; 25:75; 0:100) to provide finer control over the rate of bioink degradation. These alginate blends were then combined with a temporary viscosity modifier (gelatin) to produce a range of degradable bioinks with rheological properties suitable for extrusion bioprinting. The rate of degradation was found to be highly dependent on the OA content of the bioink. Despite this high mass loss, the initially printed geometry was maintained throughout a 4 week in vitro culture period for all bioink blends except the 0:100 group. All bioink blends also supported robust chondrogenic differentiation of mesenchymal stem/stromal cells (MSCs), resulting in the development of a hyaline-like tissue that was rich in type II collagen and negative for calcific deposits. Such tuneable inks offer numerous benefits to the field of 3D bioprinting, from providing space in a controllable manner for new extracellular matrix deposition, to alleviating concerns associated with a foreign body response to printed material inks in vivo.
AUTHOR Blume, Cornelia and Kraus, Xenia and Heene, Sebastian and Loewner, Sebastian and Stanislawski, Nils and Cholewa, Fabian and Blume, Holger
Title Vascular implants – new aspects for in situ tissue engineering [Abstract]
Year 2022
Journal/Proceedings Engineering in Life Sciences
Reftype
DOI/URL DOI
Abstract
Abstract Conventional synthetic vascular grafts require ongoing anticoagulation, and autologous venous grafts are often not available in elderly patients. This review highlights the development of bioartificial vessels replacing brain-dead donor- or animal-deriving vessels with ongoing immune reactivity. The vision for such bio-hybrids exists in a combination of biodegradable scaffolds and seeding with immune-neutral cells, and here different cells sources such as autologous progenitor cells or stem cells are relevant. This kind of in situ tissue engineering depends on a suitable bioreactor system with elaborate monitoring systems, three-dimensional (3D) visualization and a potential of cell conditioning into the direction of the targeted vascular cell phenotype. Necessary bioreactor tools for dynamic and pulsatile cultivation are described. In addition, a concept for design of vasa vasorum is outlined, that is needed for sustainable nutrition of the wall structure in large caliber vessels. For scaffold design and cell adhesion additives, different materials and technologies are discussed. 3D printing is introduced as a relatively new field with promising prospects, for example, to create complex geometries or micro-structured surfaces for optimal cell adhesion and ingrowth in a standardized and custom designed procedure. Summarizing, a bio-hybrid vascular prosthesis from a controlled biotechnological process is thus coming more and more into view. It has the potential to withstand strict approval requirements applied for advanced therapy medicinal products.
AUTHOR Jahangiri, Sepideh and Rahimnejad, Maedeh and Nasrollahi Boroujeni, Narges and Ahmadi, Zarrin and Motamed Fath, Puria and Ahmadi, Sepideh and Safarkhani, Moein and Rabiee, Navid
Title Viral and non-viral gene therapy using 3D (bio)printing [Abstract]
Year 2022
Journal/Proceedings The Journal of Gene Medicine
Reftype
DOI/URL DOI
Abstract
Abstract The overall success in launching discovered drugs is tightly restricted to the high rate of late-stage failures, which ultimately inhibits the distribution of medicines in markets. As a result, it is imperative that methods reliably predict the effectiveness and, more critically, the toxicity of medicine early in the drug development process before clinical trials be continuously innovated. We must stay up to date with the fast appearance of new infections and diseases by rapidly developing the requisite vaccinations and medicines. Modern in vitro models of disease may be used as an alternative to traditional disease models, and advanced technology can be used for the creation of pharmaceuticals as well as cells, drugs, and gene delivery systems to expedite the drug discovery procedure. Furthermore, in vitro models that mimic the spatial and chemical characteristics of native tissues, such as a 3D bioprinting system or other technologies, have proven to be more effective for drug screening than traditional 2D models. Viral and non-viral gene delivery vectors are a hopeful tool for combinatorial gene therapy, suggesting a quick way of simultaneously deliver multiple genes. A 3D bioprinting system embraces an excellent potential for gene delivery into the different cells or tissues for different diseases, in tissue engineering and regeneration medicine, in which the precise nucleic acid is located in the 3D printed tissues and scaffolds. Non-viral nanocarriers, in combination with 3D printed scaffolds, are applied to their delivery of genes and controlled release properties. There remains, however, a big obstacle in reaching the full potential of 3D models because of a lack of in vitro manufacturing of live tissues. Bioprinting advancements have made it possible to create biomimetic constructions that may be used in various drug discovery research applications. 3D bioprinting also benefits vaccinations, medicines, and relevant delivery methods because of its flexibility and adaptability. This review discusses the potential of 3D bioprinting technologies for pharmaceutical studies.
AUTHOR Gretzinger, Sarah and Schmieg, Barbara and Guthausen, Gisela and Hubbuch, Jürgen
Title Virtual Reality as Tool for Bioprinting Quality Inspection: A Proof of Principle [Abstract]
Year 2022
Journal/Proceedings Frontiers in Bioengineering and Biotechnology
Reftype
DOI/URL DOI
Abstract
As virtual reality (VR) has drastically evolved over the past few years, the field of applications of VR flourished way beyond the gaming industry. While commercial VR solutions might be available, there is a need to develop a workflow for specific applications. Bioprinting represents such an example. Here, complex 3D data is generated and needs to be visualized in the context of quality control. We demonstrate that the transfer to a commercially available VR software is possible by introducing an optimized workflow. In the present work, we developed a workflow for the visualization of the critical quality attribute (cQA) cell distribution in bioprinted (extrusion-based) samples in VR. The cQA cell distribution is directly influenced by the pre-processing step mixing of cell material in the bioink. Magnetic Resonance Imaging (MRI) was used as an analytical tool to generate spatially resolved 2.5 and 3D data of the bioprinted objects. A sample with poor quality in respect of the cQA cell distribution was identified as its inhomogeneous cell distribution could be displayed spatially resolved in VR. The described workflow facilitates the usage of VR as a tool for quality inspection in the field of bioprinting and represents a powerful tool for visualization of complex 3D MRI data.
AUTHOR Garciamendez-Mijares, Carlos Ezio and Agrawal, Prajwal and García Martínez, Germán and Cervantes Juarez, Ernesto and Zhang, Yu Shrike
Title {State-of-art affordable bioprinters: A guide for the DiY community} [Abstract]
Year 2021
Journal/Proceedings Applied Physics Reviews
Reftype
DOI/URL DOI
Abstract
{The use of bioprinting as a powerful tool for tissue and organ fabrication has been a promising development in the field of biomedicine, offering unprecedented versatility in the fabrication of biologically and physiologically relevant constructs. Even though there are a plethora of commercial bioprinters available in the market, most of them are overly expensive. Thus, university facilities and independent research groups often find it difficult, if not impossible, to equip themselves with such machinery. In this Review, we analyze affordable alternatives to commercial bioprinters, which are presented by the Do-it-Yourself (DiY) community. First, we discuss the current state of these low-cost technologies, and the advances made to bridge the divergence between marketed bioprinters and DiY devices. Afterwards, the different bioprinting technologies that are most commonplace for these low-cost devices are examined. Additionally, an overview of the pioneering DiY bioprinters takes place, as well as the open-source software alternatives to control these bioprinters. Next, we analyze the different factors to take into consideration during the bioprinting workflow, such as bioinks, computer-aided models, and bioprinting parameters. Finally, we conclude with a brief assessment of current limitations and potential solutions, as well as future developments in the arena of bioprinting.}
AUTHOR Soleymani Eil Bakhtiari, Sanaz and Bakhsheshi-Rad, Hamid Reza and Karbasi, Saeed and Razzaghi, Mahmood and Tavakoli, Mohamadreza and Ismail, Ahmad Fauzi and Sharif, Safian and RamaKrishna, Seeram and Chen, Xiongbiao and Berto, Filippo
Title 3-Dimensional Printing of Hydrogel-Based Nanocomposites: A Comprehensive Review on the Technology Description, Properties, and Applications [Abstract]
Year 2021
Journal/Proceedings Advanced Engineering Materials
Reftype
DOI/URL DOI
Abstract
Increasing demand for customized implants and tissue scaffolds requires advanced biomaterials and fabricating processes for fabricating three-dimensional (3D) structures that resemble the complexity of the extracellular matrix (ECM). Lately, biofabrication approaches such as cell-laden (soft) hydrogel 3D printing (3DP) have been of increasing interest in the development of 3D functional environments similar to natural tissues and organs. Hydrogels that resemble biological ECMs can provide mechanical support and signaling cues to cells to control their behavior. Although the capability of hydrogels to produce artificial ECMs can regulate cellular behavior, one of the major drawbacks of working with hydrogels is their inferior mechanical properties. Therefore, keeping and enhancing the mechanical integrity of fabricated scaffolds has become an essential matter for 3D hydrogel structures. Herein, 3D-printed hydrogel-based nanocomposites (NCs) are evaluated systematically in terms of introducing novel techniques for 3DP of hydrogel-based materials, properties, and biomedical applications.
AUTHOR Ramadan, Qasem and Zourob, Mohammed
Title 3D Bioprinting at the Frontier of Regenerative Medicine, Pharmaceutical, and Food Industries [Abstract]
Year 2021
Journal/Proceedings Frontiers in Medical Technology
Reftype
DOI/URL DOI
Abstract
3D printing technology has emerged as a key driver behind an ongoing paradigm shift in the production process of various industrial domains. The integration of 3D printing into tissue engineering, by utilizing life cells which are encapsulated in specific natural or synthetic biomaterials (e.g., hydrogels) as bioinks, is paving the way toward devising many innovating solutions for key biomedical and healthcare challenges and heralds' new frontiers in medicine, pharmaceutical, and food industries. Here, we present a synthesis of the available 3D bioprinting technology from what is found and what has been achieved in various applications and discussed the capabilities and limitations encountered in this technology.
AUTHOR Zhang, Xiao and Liu, Yang and Zuo, Qiang and Wang, Qingyun and Li, Zuxi and Yan, Kai and Yuan, Tao and Zhang, Yi and Shen, Kai and Xie, Rui and Fan, Weimin
Title 3D Bioprinting of Biomimetic Bilayered Scaffold Consisting of Decellularized Extracellular Matrix and Silk Fibroin for Osteochondral Repair [Abstract]
Year 2021
Journal/Proceedings International Journal of Bioprinting; Vol 7, No 4 (2021)
Reftype
DOI/URL URL DOI
Abstract
Recently, three-dimensional (3D) bioprinting technology is becoming an appealing approach for osteochondral repair. However, it is challenging to develop a bilayered scaffold with anisotropic structural properties to mimic a native osteochondral tissue. Herein, we developed a bioink consisting of decellularized extracellular matrix and silk fibroin to print the bilayered scaffold. The bilayered scaffold mimics the natural osteochondral tissue by controlling the composition, mechanical properties, and growth factor release in each layer of the scaffold. The in vitro results show that each layer of scaffolds had a suitable mechanical strength and degradation rate. Furthermore, the scaffolds encapsulating transforming growth factor-beta (TGF-β) and bone morphogenetic protein-2 (BMP-2) can act as a controlled release system and promote directed differentiation of bone marrow-derived mesenchymal stem cells. Furthermore, the in vivo experiments suggested that the scaffolds loaded with growth factors promoted osteochondral regeneration in the rabbit knee joint model. Consequently, the biomimetic bilayered scaffold loaded with TGF-β and BMP-2 would be a promising strategy for osteochondral repair.
AUTHOR Cernencu, Alexandra I. and Lungu, Adriana and Dragusin, Diana M. and Stancu, Izabela C. and Dinescu, Sorina and Balahura, Liliana R. and Mereuta, Paul and Costache, Marieta and Iovu, Horia
Title 3D Bioprinting of Biosynthetic Nanocellulose-Filled GelMA Inks Highly Reliable for Soft Tissue-Oriented Constructs [Abstract]
Year 2021
Journal/Proceedings Materials
Reftype
DOI/URL URL DOI
Abstract
Bioink-formulations based on gelatin methacrylate combined with oxidized cellulose nanofibrils are employed in the present study. The parallel investigation of the printing performance, morphological, swelling, and biological properties of the newly developed hydrogels was performed, with inks prepared using methacrylamide-modified gelatins of fish or bovine origin. Scaffolds with versatile and well-defined internal structure and high shape fidelity were successfully printed due to the high viscosity and shear-thinning behavior of formulated inks and then photo-crosslinked. The biocompatibility of 3D-scaffolds was surveyed using human adipose stem cells (hASCs) and high viability and proliferation rates were obtained when in contact with the biomaterial. Furthermore, bioprinting tests were performed with hASCs embedded in the developed formulations. The results demonstrated that the designed inks are a versatile toolkit for 3D bioprinting and further show the benefits of using fish-derived gelatin for biofabrication.
AUTHOR Nulty, Jessica and Freeman, Fiona E. and Browe, David C. and Burdis, Ross and Ahern, Daniel P. and Pitacco, Pierluca and Lee, Yu Bin and Alsberg, Eben and Kelly, Daniel J.
Title 3D Bioprinting of prevascularised implants for the repair of critically-sized bone defects [Abstract]
Year 2021
Journal/Proceedings Acta Biomaterialia
Reftype
DOI/URL URL DOI
Abstract
For 3D bioprinted tissues to be scaled-up to clinically relevant sizes, effective prevascularisation strategies are required to provide the necessary nutrients for normal metabolism and to remove associated waste by-products. The aim of this study was to develop a bioprinting strategy to engineer prevascularised tissues in vitro and to investigate the capacity of such constructs to enhance the vascularisation and regeneration of large bone defects in vivo. From a screen of different bioinks, a fibrin-based hydrogel was found to best support human umbilical vein endothelial cell (HUVEC) sprouting and the establishment of a microvessel network. When this bioink was combined with HUVECs and supporting human bone marrow stem/stromal cells (hBMSCs), these microvessel networks persisted in vitro. Furthermore, only bioprinted tissues containing both HUVECs and hBMSCs, that were first allowed to mature in vitro, supported robust blood vessel development in vivo. To assess the therapeutic utility of this bioprinting strategy, these bioinks were used to prevascularise 3D printed polycaprolactone (PCL) scaffolds, which were subsequently implanted into critically-sized femoral bone defects in rats. Microcomputed tomography (µCT) angiography revealed increased levels of vascularisation in vivo, which correlated with higher levels of new bone formation. Such prevascularised constructs could be used to enhance the vascularisation of a range of large tissue defects, forming the basis of multiple new bioprinted therapeutics. Statement of Significance This paper demonstrates a versatile 3D bioprinting technique to improve the vascularisation of tissue engineered constructs and further demonstrates how this method can be incorporated into a bone tissue engineering strategy to improve vascularisation in a rat femoral defect model.
AUTHOR Das,Sanskrita and Nam,Hyoryung and Jang,Jinah
Title 3D bioprinting of stem cell-laden cardiac patch: A promising alternative for myocardial repair
Year 2021
Journal/Proceedings APL Bioengineering
Reftype
DOI/URL DOI
AUTHOR Zhang, Yi and Wang, Bin and Hu, Junchao and Yin, Tianyuan and Yue, Tao and Liu, Na and Liu, Yuanyuan
Title 3D Composite Bioprinting for Fabrication of Artificial Biological Tissues. [Abstract]
Year 2021
Journal/Proceedings International journal of bioprinting
Reftype
DOI/URL URL
Abstract
Three-dimensional (3D) bioprinting is an important technology for fabricating artificial tissue. To effectively reconstruct the multiscale structure and multi-material gradient of natural tissues and organs, 3D bioprinting has been increasingly developed into multi-process composite mode. The current 3D composite bioprinting is a combination of two or more printing processes, and oftentimes, physical field regulation that can regulate filaments or cells during or after printing may be involved. Correspondingly, both path planning strategy and process control all become more complex. Hence, the computer-aided design and computer-aided manufacturing (CAD/CAM) system that is traditionally used in 3D printing system is now facing challenges. Thus, the scale information that cannot be modeled in the CAD process should be considered in the design of CAM by adding a process management module in the traditional CAD/CAM system and add more information reflecting component gradient in the path planning strategy.
AUTHOR Rößler, Sina and Brückner, Andreas and Kruppke, Iris and Wiesmann, Hans-Peter and Hanke, Thomas and Kruppke, Benjamin
Title 3D Plotting of Silica/Collagen Xerogel Granules in an Alginate Matrix for Tissue-Engineered Bone Implants [Abstract]
Year 2021
Journal/Proceedings Materials
Reftype
DOI/URL URL DOI
Abstract
Today, materials designed for bone regeneration are requested to be degradable and resorbable, bioactive, porous, and osteoconductive, as well as to be an active player in the bone-remodeling process. Multiphasic silica/collagen Xerogels were shown, earlier, to meet these requirements. The aim of the present study was to use these excellent material properties of silica/collagen Xerogels and to process them by additive manufacturing, in this case 3D plotting, to generate implants matching patient specific shapes of fractures or lesions. The concept is to have Xerogel granules as active major components embedded, to a large proportion, in a matrix that binds the granules in the scaffold. By using viscoelastic alginate as matrix, pastes of Xerogel granules were processed via 3D plotting. Moreover, alginate concentration was shown to be the key to a high content of irregularly shaped Xerogel granules embedded in a minimum of matrix phase. Both the alginate matrix and Xerogel granules were also shown to influence viscoelastic behavior of the paste, as well as the dimensionally stability of the scaffolds. In conclusion, 3D plotting of Xerogel granules was successfully established by using viscoelastic properties of alginate as matrix phase.
AUTHOR Shende, Pravin and Trivedi, Riddhi
Title 3D Printed Bioconstructs: Regenerative Modulation for Genetic Expression [Abstract]
Year 2021
Journal/Proceedings Stem Cell Reviews and Reports
Reftype Shende2021
DOI/URL DOI
Abstract
Layer-by-layer deposition of cells, tissues and similar molecules provided by additive manufacturing techniques such as 3D bioprinting offers safe, biocompatible, effective and inert methods for the production of biological structures and biomimetic scaffolds. 3D bioprinting assisted through computer programmes and software develops mutli-modal nano- or micro-particulate systems such as biosensors, dosage forms or delivery systems and other biological scaffolds like pharmaceutical implants, prosthetics, etc. This review article focuses on the implementation of 3D bioprinting techniques in the gene expression, in gene editing or therapy and in delivery of genes. The applications of 3D printing are extensive and include gene therapy, modulation and expression in cancers, tissue engineering, osteogenesis, skin and vascular regeneration. Inclusion of nanotechnology with genomic bioprinting parameters such as gene conjugated or gene encapsulated 3D printed nanostructures may offer new avenues in the future for efficient and controlled treatment and help in overcoming the limitations faced in conventional methods. Moreover, expansion of the benefits from such techniques is advantageous in real-time delivery or in-situ production of nucleic acids into the host cells.
AUTHOR Leu Alexa, Rebeca and Ianchis, Raluca and Savu, Diana and Temelie, Mihaela and Trica, Bogdan and Serafim, Andrada and Vlasceanu, George Mihail and Alexandrescu, Elvira and Preda, Silviu and Iovu, Horia
Title 3D Printing of Alginate-Natural Clay Hydrogel-Based Nanocomposites [Abstract]
Year 2021
Journal/Proceedings Gels
Reftype
DOI/URL URL DOI
Abstract
Biocompatibility, biodegradability, shear tinning behavior, quick gelation and an easy crosslinking process makes alginate one of the most studied polysaccharides in the field of regenerative medicine. The main purpose of this study was to obtain tissue-like materials suitable for use in bone regeneration. In this respect, alginate and several types of clay were investigated as components of 3D-printing, nanocomposite inks. Using the extrusion-based nozzle, the nanocomposites inks were printed to obtain 3D multilayered scaffolds. To observe the behavior induced by each type of clay on alginate-based inks, rheology studies were performed on composite inks. The structure of the nanocomposites samples was examined using Fourier Transform Infrared Spectrometry and X-ray Diffraction (XRD), while the morphology of the 3D-printed scaffolds was evaluated using Electron Microscopy (SEM, TEM) and Micro-Computed Tomography (Micro-CT). The swelling and dissolvability of each composite scaffold in phosfate buffer solution were followed as function of time. Biological studies indicated that the cells grew in the presence of the alginate sample containing unmodified clay, and were able to proliferate and generate calcium deposits in MG-63 cells in the absence of specific signaling molecules. This study provides novel information on potential manufacturing methods for obtaining nanocomposite hydrogels suitable for 3D printing processes, as well as valuable information on the clay type selection for enabling accurate 3D-printed constructs. Moreover, this study constitutes the first comprehensive report related to the screening of several natural clays for the additive manufacturing of 3D constructs designed for bone reconstruction therapy.
AUTHOR Francesca Cestari and Mauro Petretta and Yuejiao Yang and Antonella Motta and Brunella Grigolo and Vincenzo M. Sglavo
Title 3D printing of PCL/nano-hydroxyapatite scaffolds derived from biogenic sources for bone tissue engineering [Abstract]
Year 2021
Journal/Proceedings Sustainable Materials and Technologies
Reftype
DOI/URL URL DOI
Abstract
Bioactive composites made of ∽85 wt% poly(ε-caprolactone) (PCL) and ∽15 wt% nanometric hydroxyapatite (HA) produced from biogenic sources were 3D printed by an extrusion-based process to obtain porous scaffolds suitable for bone regeneration. Three different composite formulations were considered by using HA synthesized from three distinct natural sources, which were collected as food wastes: cuttlefish bones, mussel shells and chicken eggshells. Composition and thermal properties of the materials were analysed by thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and x-ray spectroscopy (XRD), while the morphological and mechanical properties of the 3D scaffolds were studied by means of electron microscopy (SEM) and compression tests. Bioactivity was tested by seeding human osteoblast cell line (MG63) onto the scaffolds which were analysed by confocal microscopy and Alamar Blue and PicoGreen® tests after 1 to 7 culture days. The elastic modulus (177–316 MPa) is found to be within the range reported for typical trabecular bones being increased by the presence of the bio-HA particles. Moreover, cells adhesion, viability and proliferation are largely promoted in the scaffolds containing nanometric HA with respect to pure PCL, the best results being revealed when mussel shell-derived HA is used. Indeed, different biological sources result in different cell proliferation rates, pointing that the biological origin has an impact on the cells-scaffold interaction. In general, the results show that PCL/bio-HA scaffolds possess improved mechanical properties and enhanced bioactivity when compared with pure PCL ones.
AUTHOR Vyas, Cian and Zhang, Jun and Øvrebø, Øystein and Huang, Boyang and Roberts, Iwan and Setty, Mohan and Allardyce, Benjamin and Haugen, Håvard and Rajkhowa, Rangam and Bartolo, Paulo
Title 3D printing of silk microparticle reinforced polycaprolactone scaffolds for tissue engineering applications [Abstract]
Year 2021
Journal/Proceedings Materials Science and Engineering: C
Reftype
DOI/URL URL DOI
Abstract
Polycaprolactone (PCL) scaffolds have been widely investigated for tissue engineering applications, however, they exhibit poor cell adhesion and mechanical properties. Subsequently, PCL composites have been produced to improve the material properties. This study utilises a natural material, Bombyx mori silk microparticles (SMP) prepared by milling silk fibre, to produce a composite to enhance the scaffolds properties. Silk is biocompatible and biodegradable with excellent mechanical properties. However, there are no studies using SMPs as a reinforcing agent in a 3D printed thermoplastic polymer scaffold. PCL/SMP (10, 20, 30 wt%) composites were prepared by melt blending. Rheological analysis showed that SMP loading increased the shear thinning and storage modulus of the material. Scaffolds were fabricated using a screw-assisted extrusion-based additive manufacturing system. Scanning electron microscopy and X-ray microtomography was used to determine scaffold morphology. The scaffolds had high interconnectivity with regular printed fibres and pore morphologies within the designed parameters. Compressive mechanical testing showed that the addition of SMP significantly improved the compressive Young's modulus of the scaffolds. The scaffolds were more hydrophobic with the inclusion of SMP which was linked to a decrease in total protein adsorption. Cell behaviour was assessed using human adipose derived mesenchymal stem cells. A cytotoxic effect was observed at higher particle loading (30 wt%) after 7 days of culture. By day 21, 10 wt% loading showed significantly higher cell metabolic activity and proliferation, high cell viability, and cell migration throughout the scaffold. Calcium mineral deposition was observed on the scaffolds during cell culture. Large calcium mineral deposits were observed at 30 wt% and smaller calcium deposits were observed at 10 wt%. This study demonstrates that SMPs incorporated into a PCL scaffold provided effective mechanical reinforcement, improved the rate of degradation, and increased cell proliferation, demonstrating potential suitability for bone tissue engineering applications.
AUTHOR Seydel, Caroline
Title 3D-Bioprinted Cell Therapy and Disease Modeling Applications
Year 2021
Journal/Proceedings Genetic Engineering & Biotechnology News
Reftype
DOI/URL DOI
AUTHOR Shin, Crystal S. and Cabrera, Fernando J. and Lee, Richard and Kim, John and Ammassam Veettil, Remya and Zaheer, Mahira and Adumbumkulath, Aparna and Mhatre, Kirti and Ajayan, Pulickel M. and Curley, Steven A. and Scott, Bradford G. and Acharya, Ghanashyam
Title 3D-Bioprinted Inflammation Modulating Polymer Scaffolds for Soft Tissue Repair [Abstract]
Year 2021
Journal/Proceedings Advanced Materials
Reftype
DOI/URL DOI
Abstract
Abstract Development of inflammation modulating polymer scaffolds for soft tissue repair with minimal postsurgical complications is a compelling clinical need. However, the current standard of care soft tissue repair meshes for hernia repair is highly inflammatory and initiates a dysregulated inflammatory process causing visceral adhesions and postsurgical complications. Herein, the development of an inflammation modulating biomaterial scaffold (bioscaffold) for soft tissue repair is presented. The bioscaffold design is based on the idea that, if the excess proinflammatory cytokines are sequestered from the site of injury by the surgical implantation of a bioscaffold, the inflammatory response can be modulated, and the visceral adhesion formations and postsurgical complications can be minimized. The bioscaffold is fabricated by 3D-bioprinting of an in situ phosphate crosslinked poly(vinyl alcohol) polymer. In vivo efficacy of the bioscaffold is evaluated in a rat ventral hernia model. In vivo proinflammatory cytokine expression analysis and histopathological analysis of the tissues have confirmed that the bioscaffold acts as an inflammation trap and captures the proinflammatory cytokines secreted at the implant site and effectively modulates the local inflammation without the need for exogenous anti-inflammatory agents. The bioscaffold is very effective in inhibiting visceral adhesions formation and minimizing postsurgical complications.
AUTHOR Finny, Abraham Samuel and Popoola, Oluwatosin and Andreescu, Silvana
Title 3D-Printable Nanocellulose-Based Functional Materials: Fundamentals and Applications [Abstract]
Year 2021
Journal/Proceedings Nanomaterials
Reftype
DOI/URL URL DOI
Abstract
Nanomaterials obtained from sustainable and natural sources have seen tremendous growth in recent times due to increasing interest in utilizing readily and widely available resources. Nanocellulose materials extracted from renewable biomasses hold great promise for increasing the sustainability of conventional materials in various applications owing to their biocompatibility, mechanical properties, ease of functionalization, and high abundance. Nanocellulose can be used to reinforce mechanical strength, impart antimicrobial activity, provide lighter, biodegradable, and more robust materials for packaging, and produce photochromic and electrochromic devices. While the fabrication and properties of nanocellulose are generally well established, their implementation in novel products and applications requires surface modification, assembly, and manufacturability to enable rapid tooling and scalable production. Additive manufacturing techniques such as 3D printing can improve functionality and enhance the ability to customize products while reducing fabrication time and wastage of materials. This review article provides an overview of nanocellulose as a sustainable material, covering the different properties, preparation methods, printability and strategies to functionalize nanocellulose into 3D-printed constructs. The applications of 3D-printed nanocellulose composites in food, environmental, and energy devices are outlined, and an overview of challenges and opportunities is provided.
AUTHOR Leu Alexa, Rebeca and Iovu, Horia and Ghitman, Jana and Serafim, Andrada and Stavarache, Cristina and Marin, Maria-Minodora and Ianchis, Raluca
Title 3D-Printed Gelatin Methacryloyl-Based Scaffolds with Potential Application in Tissue Engineering [Abstract]
Year 2021
Journal/Proceedings Polymers
Reftype
DOI/URL URL DOI
Abstract
The development of materials for 3D printing adapted for tissue engineering represents one of the main concerns nowadays. Our aim was to obtain suitable 3D-printed scaffolds based on methacrylated gelatin (GelMA). In this respect, three degrees of GelMA methacrylation, three different concentrations of GelMA (10%, 20%, and 30%), and also two concentrations of photoinitiator (I-2959) (0.5% and 1%) were explored to develop proper GelMA hydrogel ink formulations to be used in the 3D printing process. Afterward, all these GelMA hydrogel-based inks/3D-printed scaffolds were characterized structurally, mechanically, and morphologically. The presence of methacryloyl groups bounded to the surface of GelMA was confirmed by FTIR and 1H-NMR analyses. The methacrylation degree influenced the value of the isoelectric point that decreased with the GelMA methacrylation degree. A greater concentration of photoinitiator influenced the hydrophilicity of the polymer as proved using contact angle and swelling studies because of the new bonds resulting after the photocrosslinking stage. According to the mechanical tests, better mechanical properties were obtained in the presence of the 1% initiator. Circular dichroism analyses demonstrated that the secondary structure of gelatin remained unaffected during the methacrylation process, thus being suitable for biological applications.
AUTHOR Junghyun Lee and Chong {Yang Chuah} and Wen {See Tan} and Juha Song and Tae-Hyun Bae
Title 3D-printed monolithic porous adsorbents from a solution-processible, hypercrosslinkable, functionalizable polymer [Abstract]
Year 2021
Journal/Proceedings Chemical Engineering Journal
Reftype
DOI/URL URL DOI
Abstract
Solid adsorbents have been actively developed for energy-efficient gas separations including carbon capture and air purification. However, conventional particulate adsorbents often show ineffective mass transfer and significant pressure drop in practical operations, leading to a limited overall performance. As a potential solution to these issues, the development of three-dimensionally (3D) structured adsorbents has been proposed. Herein, we report a novel approach to design 3D monolithic adsorbents for CO2 separation via 3D printing of a processible polymer, which in turn can be transformed into a functional porous material via hypercrosslinking and amine-grafting. Importantly, such structure can be realized without an aid from binders or mechanical supports. Our adsorbents demonstrated a promising CO2 adsorption performance without experiencing any pressure drop under dynamic flow condition. The stability and regenerability, which are also important requirements for practical operations, were also successfully demonstrated through a repetitive adsorption-desorption cycling test in the presence of water vapor. We envisage that our approach can be applied in the development of structurally versatile adsorbents for various gas separation processes.
AUTHOR Golafshan, Nasim and Willemsen, Koen and Kadumudi, Firoz Babu and Vorndran, Elke and Dolatshahi-Pirouz, Alireza and Weinans, Harrie and van der Wal, Bart C. H. and Malda, Jos and Castilho, Miguel
Title 3D-Printed Regenerative Magnesium Phosphate Implant Ensures Stability and Restoration of Hip Dysplasia [Abstract]
Year 2021
Journal/Proceedings Advanced Healthcare Materials
Reftype
DOI/URL DOI
Abstract
Abstract Osteoarthritis of the hip is a painful and debilitating condition commonly occurring in humans and dogs. One of the main causes that leads to hip osteoarthritis is hip dysplasia. Although the current surgical methods to correct dysplasia work satisfactorily in many circumstances, these are associated with serious complications, tissue resorption, and degeneration. In this study, a one-step fabrication of a regenerative hip implant with a patient-specific design and load-bearing properties is reported. The regenerative hip implant is fabricated based on patient imaging files and by an extrusion assisted 3D printing process using a flexible, bone-inducing biomaterial. The novel implant can be fixed with metallic screws to host bone and can be loaded up to physiological loads without signs of critical permanent deformation or failure. Moreover, after exposing the hip implant to accelerated in vitro degradation, it is confirmed that it is still able to support physiological loads even after losing ≈40% of its initial mass. In addition, the osteopromotive properties of the novel hip implant is demonstrated as shown by an increased expression of osteonectin and osteocalcin by cultured human mesenchymal stem cells after 21 days. Overall, the proposed hip implant provides an innovative regenerative and mechanically stable solution for hip dysplasia treatment.
AUTHOR Jiahui Lai and Xinliang Ye and Jia Liu and Chong Wang and Junzhi Li and Xiang Wang and Mingze Ma and Min Wang
Title 4D printing of highly printable and shape morphing hydrogels composed of alginate and methylcellulose [Abstract]
Year 2021
Journal/Proceedings Materials & Design
Reftype
DOI/URL URL DOI
Abstract
4D printing of swellable/shrinkable hydrogels has been viewed as an appealing approach for fabricating dynamic structures for various biomedical applications. However, 4D printing of precise hydrogel structures is still highly challenging due to the relatively poor printability of hydrogels and high surface roughness of printed patterns, when micro extrusion-based 3D printers are used. In this study, a highly printable and shape morphing hydrogel was investigated for 4D printing by blending alginate (Alg) and methylcellulose (MC). The optimized Alg/MC hydrogel exhibited excellent rheological properties, extrudability and shape fidelity of printed structures. The printable Alg/MC hydrogel was 4D printed into a series of patterned 2D architectures which were encoded with anisotropic stiffness and swelling behaviors by strategically controlling the network density gradients vertical to the orientation of the patterned strips. By controlling the strip interspacing and angle, these 2D architectures could transform into various prescribed simple 3D morphologies (e.g., tube-curling and helix) and complex 3D morphologies (e.g., double helix and flowers) after immersion in a calcium chloride solution. This shape morphing Alg/MC hydrogel with excellent printability has high potential for 4D printing of delicate hydrogel patterns, which are increasingly needed in the tissue engineering, biomedical device and soft robotics fields.
AUTHOR Chelsea Twohig and Mari Helsinga and Amin Mansoorifar and Avathamsa Athirasala and Anthony Tahayeri and Cristiane Miranda França and Silvia Amaya Pajares and Reyan Abdelmoniem and Susanne Scherrer and Stéphane Durual and Jack Ferracane and Luiz E. Bertassoni
Title A dual-ink 3D printing strategy to engineer pre-vascularized bone scaffolds in-vitro [Abstract]
Year 2021
Journal/Proceedings Materials Science and Engineering: C
Reftype
DOI/URL URL DOI
Abstract
A functional vascular supply is a key component of any large-scale tissue, providing support for the metabolic needs of tissue-remodeling cells. Although well-studied strategies exist to fabricate biomimetic scaffolds for bone regeneration, success rates for regeneration in larger defects can be improved by engineering microvascular capillaries within the scaffolds to enhance oxygen and nutrient supply to the core of the engineered tissue as it grows. Even though the role of calcium and phosphate has been well understood to enhance osteogenesis, it remains unclear whether calcium and phosphate may have a detrimental effect on the vasculogenic and angiogenic potential of endothelial cells cultured on 3D printed bone scaffolds. In this study, we presented a novel dual-ink bioprinting method to create vasculature interwoven inside CaP bone constructs. In this method, strands of a CaP ink and a sacrificial template material was used to form scaffolds containing CaP fibers and microchannels seeded with vascular endothelial and mesenchymal stem cells (MSCs) within a photo-crosslinkable gelatin methacryloyl (GelMA) hydrogel material. Our results show similar morphology of growing vessels in the presence of CaP bioink, and no significant difference in endothelial cell sprouting was found. Furthermore, our initial results showed the differentiation of hMSCs into pericytes in the presence of CaP ink. These results indicate the feasibility of creating vascularized bone scaffolds, which can be used for enhancing vascular formation in the core of bone scaffolds.
AUTHOR Kwak, Chaesu and Young Ryu, Seoung and Park, Hyunsu and Lim, Sehyeong and Yang, Jeewon and Kim, Jieun and Hyung Kim, Jin and Lee, Joohyung
Title A pickering emulsion stabilized by chlorella microalgae as an eco-friendly extrusion-based 3D printing ink processable under ambient conditions [Abstract]
Year 2021
Journal/Proceedings Journal of Colloid and Interface Science
Reftype
DOI/URL URL DOI
Abstract
Three-dimensional (3D) printing technology is actively utilized in various industrial fields because it facilitates effective and customizable fabrication of complex structures. An important processing route for 3D printing is the extrusion of inks in the form of colloidal suspensions or emulsions, which has recently attracted considerable attention because it allows for selection of a wide range of printing materials and is operable under ambient processing conditions. Herein, we investigate the 3D printability of complex fluids containing chlorella microalgae as an eco-friendly material for 3D printing. Two possible ink types are considered: aqueous chlorella suspensions and emulsions of oil and water mixtures. While the aqueous chlorella suspensions at high particle loading display the 3D-printable rheological properties such as high yield stress and good shape retention, the final structures after extruding and drying the suspensions under ambient conditions show a significant number of macroscopic defects, limiting their practical application. In contrast, the 3D structures produced from the oil-in-water Pickering emulsions stabilized by chlorella microalgae, which are amphiphilic and active at the oil–water interface, show significantly reduced defect formation. Addition of a fast-evaporable oil phase, hexane, is crucial in the mechanisms of enhanced cementation between the individual microalgae via increased inter-particle packing, capillary attraction, and hydrophobic interaction. Furthermore, addition of solid paraffin wax, which is crystalline but well-soluble in the hydrocarbon oil phase under ambient conditions, completely eliminates the undesirable defect formation via enhanced inter-particle binding, while maintaining the overall rheological properties of the emulsion. The optimal formulation of the Pickering emulsion is finally employed to produce a 3D scaffold of satisfactory structural integrity, suggesting that the chlorella-based ink, in the form of an emulsion, has potential as an eco-friendly 3D printing ink processable under ambient conditions.
AUTHOR Bin Wang and Pedro J. Díaz-Payno and David C. Browe and Fiona E. Freeman and Jessica Nulty and Ross Burdis and Daniel J. Kelly
Title Affinity-bound growth factor within sulfated interpenetrate network bioinks for bioprinting cartilaginous tissues [Abstract]
Year 2021
Journal/Proceedings Acta Biomaterialia
Reftype
DOI/URL URL DOI
Abstract
3D bioprinting has emerged as a promising technology in the field of tissue engineering and regenerative medicine due to its ability to create anatomically complex tissue substitutes. However, it still remains challenging to develop bioactive bioinks that provide appropriate and permissive environments to instruct and guide the regenerative process in vitro and in vivo. In this study alginate sulfate, a sulfated glycosaminoglycan (sGAG) mimic, was used to functionalize an alginate-gelatin methacryloyl (GelMA) interpenetrating network (IPN) bioink to enable the bioprinting of cartilaginous tissues. The inclusion of alginate sulfate had a limited influence on the viscosity, shear-thinning and thixotropic properties of the IPN bioink, enabling high-fidelity bioprinting and supporting mesenchymal stem cell (MSC) viability post-printing. The stiffness of printed IPN constructs greatly exceeded that achieved by printing alginate or GelMA alone, while maintaining resilience and toughness. Furthermore, given the high affinity of alginate sulfate to heparin-binding growth factors, the sulfated IPN bioink supported the sustained release of transforming growth factor-β3 (TGF-β3), providing an environment that supported robust chondrogenesis in vitro, with little evidence of hypertrophy or mineralization over extended culture periods. Such bioprinted constructs also supported chondrogenesis in vivo, with the controlled release of TGF-β3 promoting significantly higher levels of cartilage-specific extracellular matrix deposition. Altogether, these results demonstrate the potential of bioprinting sulfated bioinks as part of a ‘single-stage’ or ‘point-of-care’ strategy for regenerating cartilaginous tissues. Statement of Significance: This study highlights the potential of using sulfated interpenetrating network (IPN) bioink to support the regeneration of phenotypically stable articular cartilage. Construction of interpenetrate networks in the bioink enables unique high-fidelity bioprinting and unique synergistic mechanical properties. The presence of alginate sulfate provided the capacity of high affinity-binding of TGF-β3, which promoted robust chondrogenesis.
AUTHOR Rachel Cadle and Dan Rogozea and Leni Moldovan and Patricia Parsons-Wingerter and Nicanor I. Moldovan
Title An image analysis-based workflow for 3D bioprinting of anatomically realistic retinal vascular patterns [Abstract]
Year 2021
Journal/Proceedings Bioprinting
Reftype
DOI/URL URL DOI
Abstract
There is an enduring need for vascularization of bioprinted constructs with vascular networks optimized for distribution of nutrient-containing fluids, both for in vitro applications and in vivo implantation. However, most of the efforts in this field were directed so far towards generation of simple linear channels, often lined with endothelial cells only, and thus lacking the anatomical details of real vascular networks. To start addressing this need, here we explored the possibility of using actual vascular patterns derived from human ocular fundus for instructing the 3D printing activity. In order to assign to these patterns the organ-specific topology, and eventually vessel branch-defined cellular composition, we describe the use of the branching analysis program VESGEN 2D for planning a workflow that links the primary vascular images with their 3D printing with bioinks. To this end, we show how to process flat vascular images and, for an even more realistic representation, how to retro-engineer concave retinal patterns from flat images and to print them in a supporting hydrogel. This work opens the possibility of bioprinting more anatomically realistic vascular networks, and thus to eventually improve the vascularization of living tissue-engineered constructs.
AUTHOR Rachel Cadle and Dan Rogozea and Leni Moldovan and Patricia Parsons-Wingerter and Nicanor I. Moldovan
Title An image analysis-based workflow for 3D bioprinting of anatomically realistic retinal vascular patterns [Abstract]
Year 2021
Journal/Proceedings Bioprinting
Reftype
DOI/URL URL DOI
Abstract
There is an enduring need for vascularization of bioprinted constructs with vascular networks optimized for distribution of nutrient-containing fluids, both for in vitro applications and in vivo implantation. However, most of the efforts in this field were directed so far towards generation of simple linear channels, often lined with endothelial cells only, and thus lacking the anatomical details of real vascular networks. To start addressing this need, here we explored the possibility of using actual vascular patterns derived from human ocular fundus for instructing the 3D printing activity. In order to assign to these patterns the organ-specific topology, and eventually vessel branch-defined cellular composition, we describe the use of the branching analysis program VESGEN 2D for planning a workflow that links the primary vascular images with their 3D printing with bioinks. To this end, we show how to process flat vascular images and, for an even more realistic representation, how to retro-engineer concave retinal patterns from flat images and to print them in a supporting hydrogel. This work opens the possibility of bioprinting more anatomically realistic vascular networks, and thus to eventually improve the vascularization of living tissue-engineered constructs.
AUTHOR Rachel Cadle and Dan Rogozea and Leni Moldovan and Patricia Parsons-Wingerter and Nicanor I. Moldovan
Title An image analysis-based workflow for 3D bioprinting of anatomically realistic retinal vascular patterns [Abstract]
Year 2021
Journal/Proceedings Bioprinting
Reftype
DOI/URL URL DOI
Abstract
There is an enduring need for vascularization of bioprinted constructs with vascular networks optimized for distribution of nutrient-containing fluids, both for in vitro applications and in vivo implantation. However, most of the efforts in this field were directed so far towards generation of simple linear channels, often lined with endothelial cells only, and thus lacking the anatomical details of real vascular networks. To start addressing this need, here we explored the possibility of using actual vascular patterns derived from human ocular fundus for instructing the 3D printing activity. In order to assign to these patterns the organ-specific topology, and eventually vessel branch-defined cellular composition, we describe the use of the branching analysis program VESGEN 2D for planning a workflow that links the primary vascular images with their 3D printing with bioinks. To this end, we show how to process flat vascular images and, for an even more realistic representation, how to retro-engineer concave retinal patterns from flat images and to print them in a supporting hydrogel. This work opens the possibility of bioprinting more anatomically realistic vascular networks, and thus to eventually improve the vascularization of living tissue-engineered constructs.
AUTHOR Rachel Cadle and Dan Rogozea and Leni Moldovan and Patricia Parsons-Wingerter and Nicanor I. Moldovan
Title An image analysis-based workflow for 3D bioprinting of anatomically realistic retinal vascular patterns [Abstract]
Year 2021
Journal/Proceedings Bioprinting
Reftype
DOI/URL URL DOI
Abstract
There is an enduring need for vascularization of bioprinted constructs with vascular networks optimized for distribution of nutrient-containing fluids, both for in vitro applications and in vivo implantation. However, most of the efforts in this field were directed so far towards generation of simple linear channels, often lined with endothelial cells only, and thus lacking the anatomical details of real vascular networks. To start addressing this need, here we explored the possibility of using actual vascular patterns derived from human ocular fundus for instructing the 3D printing activity. In order to assign to these patterns the organ-specific topology, and eventually vessel branch-defined cellular composition, we describe the use of the branching analysis program VESGEN 2D for planning a workflow that links the primary vascular images with their 3D printing with bioinks. To this end, we show how to process flat vascular images and, for an even more realistic representation, how to retro-engineer concave retinal patterns from flat images and to print them in a supporting hydrogel. This work opens the possibility of bioprinting more anatomically realistic vascular networks, and thus to eventually improve the vascularization of living tissue-engineered constructs.
AUTHOR Zuoxin Zhou and Mario Samperi and Lea Santu and Glenieliz Dizon and Shereen Aboarkaba and David Limón and David Limón and Christopher Tuck and Lluïsa Pérez-García and Derek J. Irvine and David B. Amabilino and Ricky Wildman
Title An Imidazolium-Based Supramolecular Gelator Enhancing Interlayer Adhesion in 3D Printed Dual Network Hydrogels [Abstract]
Year 2021
Journal/Proceedings Materials & Design
Reftype
DOI/URL URL DOI
Abstract
The variety of UV-curable monomers for 3D printing is limited by a requirement for rapid curing after each sweep depositing a layer. This study proposes to trigger supramolecular self-assembly during the process by a gemini imidazolium-based low-molecular-weight gelator, allowing printing of certain monomers. The as-printed hydrogel structures were supported by a gelator network immobilising monomer:water solutions. A thixotropic hydrogel was formed with a recovery time of < 50 seconds, storage modulus = 8.1 kPa and yield stress = 18 Pa, processable using material-extrusion 3D printing. Material-extrusion 3D printed objects are usually highly anisotropic, but in this case the gelator network improved the isotropy by subverting the usual layer-by-layer curing strategy. The monomer in all printed layers was cured simultaneously during post-processing to form a continuous polymeric network. The two networks then physically interpenetrate to enhance mechanical performance. The double-network hydrogels fabricated with layers cured simultaneously showed 62-147 % increases in tensile properties compared to layer-by-layer cured hydrogels. The results demonstrated excellent inter- and intra-layered coalescence. Consequently, the tensile properties of 3D printed hydrogels were close to mould cast objects. This study has demonstrated the benefits of using gelators to expand the variety of 3D printable monomers and shown improved isotropy to offer excellent mechanical performances.
AUTHOR Yuanhao Wu and Gabriele Maria Fortunato and Babatunde O Okesola and Francesco Luigi Pellerej di Brocchetti and Ratima Suntornnond and John Connelly and Carmelo De Maria and Jose Carlos Rodriguez-Cabello and Giovanni Vozzi and Wen Wang and Alvaro Mata
Title An interfacial self-assembling bioink for the manufacturing of capillary-like structures with tuneable and anisotropic permeability [Abstract]
Year 2021
Journal/Proceedings Biofabrication
Reftype
DOI/URL DOI
Abstract
Self-assembling bioinks offer the possibility to biofabricate with molecular precision, hierarchical control, and biofunctionality. For this to become a reality with widespread impact, it is essential to engineer these ink systems ensuring reproducibility and providing suitable standardization. We have reported a self-assembling bioink based on disorder-to-order transitions of an elastin-like recombinamer (ELR) to co-assemble with graphene oxide (GO). Here, we establish reproducible processes, optimize printing parameters for its use as a bioink, describe new advantages that the self-assembling bioink can provide, and demonstrate how to fabricate novel structures with physiological relevance. We fabricate capillary-like structures with resolutions down to ∼10 µm in diameter and ∼2 µm thick tube walls and use both experimental and finite element analysis to characterize the printing conditions, underlying interfacial diffusion-reaction mechanism of assembly, printing fidelity, and material porosity and permeability. We demonstrate the capacity to modulate the pore size and tune the permeability of the resulting structures with and without human umbilical vascular endothelial cells. Finally, the potential of the ELR-GO bioink to enable supramolecular fabrication of biomimetic structures was demonstrated by printing tubes exhibiting walls with progressively different structure and permeability.
AUTHOR Leu Alexa, Rebeca and Iovu, Horia and Trica, Bogdan and Zaharia, Catalin and Serafim, Andrada and Alexandrescu, Elvira and Radu, Ionut-Cristian and Vlasceanu, George and Preda, Silviu and Ninciuleanu, Claudia Mihaela and Ianchis, Raluca
Title Assessment of Naturally Sourced Mineral Clays for the 3D Printing of Biopolymer-Based Nanocomposite Inks [Abstract]
Year 2021
Journal/Proceedings Nanomaterials
Reftype
DOI/URL URL DOI
Abstract
The present study investigated the possibility of obtaining 3D printed composite constructs using biomaterial-based nanocomposite inks. The biopolymeric matrix consisted of methacrylated gelatin (GelMA). Several types of nanoclay were added as the inorganic component. Our aim was to investigate the influence of clay type on the rheological behavior of ink formulations and to determine the morphological and structural properties of the resulting crosslinked hydrogel-based nanomaterials. Moreover, through the inclusion of nanoclays, our goal was to improve the printability and shape fidelity of nanocomposite scaffolds. The viscosity of all ink formulations was greater in the presence of inorganic nanoparticles as shear thinning occurred with increased shear rate. Hydrogel nanocomposites presented predominantly elastic rather than viscous behavior as the materials were crosslinked which led to improved mechanical properties. The inclusion of nanoclays in the biopolymeric matrix limited hydrogel swelling due the physical barrier effect but also because of the supplementary crosslinks induced by the clay layers. The distribution of inorganic filler within the GelMA-based hydrogels led to higher porosities as a consequence of their interaction with the biopolymeric ink. The present study could be useful for the development of soft nanomaterials foreseen for the additive manufacturing of customized implants for tissue engineering.
AUTHOR Otto, I. A. and Capendale, P. E. and Garcia, J. P. and de Ruijter, M. and van Doremalen, R. F. M. and Castilho, M. and Lawson, T. and Grinstaff, M. W. and Breugem, C. C. and Kon, M. and Levato, R. and Malda, J.
Title Biofabrication of a shape-stable auricular structure for the reconstruction of ear deformities [Abstract]
Year 2021
Journal/Proceedings Materials Today Bio
Reftype
DOI/URL URL DOI
Abstract
Bioengineering of the human auricle remains a significant challenge, where the complex and unique shape, the generation of high-quality neocartilage, and shape preservation are key factors. Future regenerative medicine–based approaches for auricular cartilage reconstruction will benefit from a smart combination of various strategies. Our approach to fabrication of an ear-shaped construct uses hybrid bioprinting techniques, a recently identified progenitor cell population, previously validated biomaterials, and a smart scaffold design. Specifically, we generated a 3D-printed polycaprolactone (PCL) scaffold via fused deposition modeling, photocrosslinked a human auricular cartilage progenitor cell–laden gelatin methacryloyl (gelMA) hydrogel within the scaffold, and cultured the bioengineered structure in vitro in chondrogenic media for 30 days. Our results show that the fabrication process maintains the viability and chondrogenic phenotype of the cells, that the compressive properties of the combined PCL and gelMA hybrid auricular constructs are similar to native auricular cartilage, and that biofabricated hybrid auricular structures exhibit excellent shape fidelity compared with the 3D digital model along with deposition of cartilage-like matrix in both peripheral and central areas of the auricular structure. Our strategy affords an anatomically enhanced auricular structure with appropriate mechanical properties, ensures adequate preservation of the auricular shape during a dynamic in vitro culture period, and enables chondrogenically potent progenitor cells to produce abundant cartilage-like matrix throughout the auricular construct. The combination of smart scaffold design with 3D bioprinting and cartilage progenitor cells holds promise for the development of clinically translatable regenerative medicine strategies for auricular reconstruction.
AUTHOR Nulty, Jessica and Burdis, Ross and Kelly, Daniel J.
Title Biofabrication of Prevascularised Hypertrophic Cartilage Microtissues for Bone Tissue Engineering [Abstract]
Year 2021
Journal/Proceedings Frontiers in Bioengineering and Biotechnology
Reftype
DOI/URL DOI
Abstract
Bone tissue engineering (TE) has the potential to transform the treatment of challenging musculoskeletal pathologies. To date, clinical translation of many traditional TE strategies has been impaired by poor vascularisation of the implant. Addressing such challenges has motivated research into developmentally inspired TE strategies, whereby implants mimicking earlier stages of a tissue’s development are engineered in vitro and then implanted in vivo to fully mature into the adult tissue. The goal of this study was to engineer in vitro tissues mimicking the immediate developmental precursor to long bones, specifically a vascularised hypertrophic cartilage template, and to then assess the capacity of such a construct to support endochondral bone formation in vivo. To this end, we first developed a method for the generation of large numbers of hypertrophic cartilage microtissues using a microwell system, and encapsulated these microtissues into a fibrin-based hydrogel capable of supporting vasculogenesis by human umbilical vein endothelial cells (HUVECs). The microwells supported the formation of bone marrow derived stem/stromal cell (BMSC) aggregates and their differentiation toward a hypertrophic cartilage phenotype over 5 weeks of cultivation, as evident by the development of a matrix rich in sulphated glycosaminoglycan (sGAG), collagen types I, II, and X, and calcium. Prevascularisation of these microtissues, undertaken in vitro 1 week prior to implantation, enhanced their capacity to mineralise, with significantly higher levels of mineralised tissue observed within such implants after 4 weeks in vivo within an ectopic murine model for bone formation. It is also possible to integrate such microtissues into 3D bioprinting systems, thereby enabling the bioprinting of scaled-up, patient-specific prevascularised implants. Taken together, these results demonstrate the development of an effective strategy for prevascularising a tissue engineered construct comprised of multiple individual microtissue “building blocks,” which could potentially be used in the treatment of challenging bone defects.
AUTHOR Falcones, Bryan and Sanz-Fraile, Héctor and Marhuenda, Esther and Mendizábal, Irene and Cabrera-Aguilera, Ignacio and Malandain, Nanthilde and Uriarte, Juan J. and Almendros, Isaac and Navajas, Daniel and Weiss, Daniel J. and Farré, Ramon and Otero, Jorge
Title Bioprintable Lung Extracellular Matrix Hydrogel Scaffolds for 3D Culture of Mesenchymal Stromal Cells [Abstract]
Year 2021
Journal/Proceedings Polymers
Reftype
DOI/URL URL DOI
Abstract
Mesenchymal stromal cell (MSC)-based cell therapy in acute respiratory diseases is based on MSC secretion of paracrine factors. Several strategies have proposed to improve this are being explored including pre-conditioning the MSCs prior to administration. We here propose a strategy for improving the therapeutic efficacy of MSCs based on cell preconditioning by growing them in native extracellular matrix (ECM) derived from the lung. To this end, a bioink with tunable stiffness based on decellularized porcine lung ECM hydrogels was developed and characterized. The bioink was suitable for 3D culturing of lung-resident MSCs without the need for additional chemical or physical crosslinking. MSCs showed good viability, and contraction assays showed the existence of cell–matrix interactions in the bioprinted scaffolds. Adhesion capacity and length of the focal adhesions formed were increased for the cells cultured within the lung hydrogel scaffolds. Also, there was more than a 20-fold increase of the expression of the CXCR4 receptor in the 3D-cultured cells compared to the cells cultured in plastic. Secretion of cytokines when cultured in an in vitro model of lung injury showed a decreased secretion of pro-inflammatory mediators for the cells cultured in the 3D scaffolds. Moreover, the morphology of the harvested cells was markedly different with respect to conventionally (2D) cultured MSCs. In conclusion, the developed bioink can be used to bioprint structures aimed to improve preconditioning MSCs for therapeutic purposes.
AUTHOR Burdis, Ross and Chariyev-Prinz, Farhad and Kelly, Daniel J.
Title Bioprinting of biomimetic self-organised cartilage with a supporting joint fixation device [Abstract]
Year 2021
Journal/Proceedings Biofabrication
Reftype
DOI/URL DOI
Abstract
Despite sustained efforts, engineering truly biomimetic articular cartilage (AC) via traditional top-down approaches remains challenging. Emerging biofabrication strategies, from 3D bioprinting to scaffold-free approaches that leverage principles of cellular self-organisation, are generating significant interest in the field of cartilage tissue engineering as a means of developing biomimetic tissue analogues in vitro. Although such strategies have advanced the quality of engineered cartilage, recapitulation of many key structural features of native AC, in particular a collagen network mimicking the tissue’s ‘Benninghoff arcade’, remains elusive. Additionally, a complete solution to fixating engineered cartilages in situ within damaged synovial joints has yet to be identified. This study sought to address both of these key challenges by engineering biomimetic AC within a device designed to anchor the tissue within a synovial joint defect. We first designed and fabricated a fixation device capable of anchoring engineered cartilage into the subchondral bone. Next, we developed a strategy for inkjet printing porcine mesenchymal stem/stromal cells (MSCs) into this supporting fixation device, which was also designed to provide instructive cues to direct the self-organisation of MSC condensations towards a stratified engineered AC. We found that a higher starting cell-density supported the development of a more zonally defined collagen network within the engineered tissue. Dynamic culture was implemented to further enhance the quality of this engineered tissue, resulting in an approximate 3 fold increase in glycosaminoglycan and collagen accumulation. Ultimately this strategy supported the development of AC that exhibited near-native levels of glycosaminoglycan accumulation (>5% WW), as well as a biomimetic collagen network organisation with a perpendicular to a parallel fibre arrangement (relative to the tissue surface) from the deep to superficial zones via arcading fibres within the middle zone of the engineered tissue. Collectively, this work demonstrates the successful convergence of novel biofabrication methods, bioprinting strategies and culture regimes to engineer a hybrid implant suited to resurfacing AC defects.
AUTHOR Fisch, Philipp and Broguiere, Nicolas and Finkielsztein, Sergio and Linder, Thomas and Zenobi-Wong, Marcy
Title Bioprinting of Cartilaginous Auricular Constructs Utilizing an Enzymatically Crosslinkable Bioink [Abstract]
Year 2021
Journal/Proceedings Advanced Functional Materials
Reftype
DOI/URL DOI
Abstract
Abstract Bioprinting of functional tissues could overcome tissue shortages and allow a more rapid response for treatments. However, despite recent progress in bioprinting, and its outstanding ability to position cells and biomaterials in a precise 3D manner, its success has been limited, due to insufficient maturation of constructs into functional tissue. Here, a novel calcium-triggered enzymatic crosslinking (CTEC) mechanism for bioinks based on the activation cascade of Factor XIII is presented and utilized for the biofabrication of cartilaginous constructs. Hyaluronan transglutaminase (HA-TG), an enzymatically crosslinkable material, has shown excellent characteristics for chondrogenesis and builds the basis of the CTEC bioink. The bioink supports tissue maturation with neocartilage formation and stiffening of constructs up to 400 kPa. Bioprinted constructs remain stable in vivo for 24 weeks and bioprinted auricular constructs transform into cartilaginous grafts. A major limitation of the current study is the deposition of collagen I, indicating the maturation toward fibrocartilage rather than elastic cartilage. Shifting the maturation process toward elastic cartilage will therefore be essential in order for the developed bioinks to offer a novel tissue engineered treatment for microtia patients. CTEC bioprinting furthermore opens up use of enzymatically crosslinkable biopolymers and their modularity to support a multitude of tissues.
AUTHOR Silvestri, Alessandro and Criado, Alejandro and Poletti, Fabrizio and Wang, Faxing and Fanjul-Bolado, Pablo and González-García, María B. and García-Astrain, Clara and Liz-Marzán, Luis M. and Feng, Xinliang and Zanardi, Chiara and Prato, Maurizio
Title Bioresponsive, Electroactive, and Inkjet-Printable Graphene-Based Inks [Abstract]
Year 2021
Journal/Proceedings Advanced Functional Materials
Reftype
DOI/URL DOI
Abstract
Abstract With the advent of flexible electronics, the old fashioned and conventional solid-state technology will be replaced by conductive inks combined with low-cost printing techniques. Graphene is an ideal candidate to produce conductive inks, due to its excellent conductivity and zero bandgap. The possibility to chemically modify graphene with active molecules opens up the field of responsive conductive inks. Herein, a bioresponsive, electroactive, and inkjet-printable graphene ink is presented. The ink is based on graphene chemically modified with selected enzymes and an electrochemical mediator, to transduce the products of the enzymatic reaction into an electron flow, proportional to the analyte concentration. A water-based formulation is engineered to be respectful with the enzymatic activity while matching the stringent requirements of inkjet printing. The efficient electrochemical performance of the ink, as well as a proof-of-concept application in biosensing, is demonstrated. The versatility of the system is demonstrated by modifying graphene with various oxidoreductases, obtaining inks with selectivity toward glucose, lactate, methanol, and ethanol.
AUTHOR Tarassoli, Sam P. and Jessop, Zita M. and Jovic, Thomas and Hawkins, Karl and Whitaker, Iain S.
Title Candidate Bioinks for Extrusion 3D Bioprinting—A Systematic Review of the Literature [Abstract]
Year 2021
Journal/Proceedings Frontiers in Bioengineering and Biotechnology
Reftype
DOI/URL DOI
Abstract
Purpose: Bioprinting is becoming an increasingly popular platform technology for engineering a variety of tissue types. Our aim was to identify biomaterials that have been found to be suitable for extrusion 3D bioprinting, outline their biomechanical properties and biocompatibility towards their application for bioprinting specific tissue types. This systematic review provides an in-depth overview of current biomaterials suitable for extrusion to aid bioink selection for specific research purposes and facilitate design of novel tailored bioinks.Methods: A systematic search was performed on EMBASE, PubMed, Scopus and Web of Science databases according to the PRISMA guidelines. References of relevant articles, between December 2006 to January 2018, on candidate bioinks used in extrusion 3D bioprinting were reviewed by two independent investigators against standardised inclusion and exclusion criteria. Data was extracted on bioprinter brand and model, printing technique and specifications (speed and resolution), bioink material and class of mechanical assessment, cell type, viability, and target tissue. Also noted were authors, study design (in vitro/in vivo), study duration and year of publication.Results: A total of 9,720 studies were identified, 123 of which met inclusion criteria, consisting of a total of 58 reports using natural biomaterials, 26 using synthetic biomaterials and 39 using a combination of biomaterials as bioinks. Alginate (n = 50) and PCL (n = 33) were the most commonly used bioinks, followed by gelatin (n = 18) and methacrylated gelatin (GelMA) (n = 16). Pneumatic extrusion bioprinting techniques were the most common (n = 78), followed by piston (n = 28). The majority of studies focus on the target tissue, most commonly bone and cartilage, and investigate only one bioink rather than assessing a range to identify those with the most promising printability and biocompatibility characteristics. The Bioscaffolder (GeSiM, Germany), 3D Discovery (regenHU, Switzerland), and Bioplotter (EnvisionTEC, Germany) were the most commonly used commercial bioprinters (n = 35 in total), but groups most often opted to create their own in-house devices (n = 20). Many studies also failed to specify whether the mechanical data reflected pre-, during or post-printing, pre- or post-crosslinking and with or without cells.Conclusions: Despite the continued increase in the variety of biocompatible synthetic materials available, there has been a shift change towards using natural rather than synthetic bioinks for extrusion bioprinting, dominated by alginate either alone or in combination with other biomaterials. On qualitative analysis, no link was demonstrated between the type of bioink or extrusion technique and the target tissue, indicating that bioprinting research is in its infancy with no established tissue specific bioinks or bioprinting techniques. Further research is needed on side-by-side characterisation of bioinks with standardisation of the type and timing of biomechanical assessment.
AUTHOR Oliveira, H. and Médina, C. and Labrunie, G. and Dusserre, N. and Catros, S. and Magnan, L. and Handschin, C. and Stachowicz, M. L. and Fricain, J.-C. and L’Heureux, N.
Title Cell-assembled extracellular matrix (CAM): a human biopaper for the biofabrication of pre-vascularized tissues able to connect to the host circulation in vivo [Abstract]
Year 2021
Journal/Proceedings Biofabrication
Reftype
DOI/URL DOI
Abstract
When considering regenerative approaches, the efficient creation of a functional vasculature, that can support the metabolic needs of bioengineered tissues, is essential for their survival after implantation. However, it is widely recognized that the post-implantation microenvironment of the engineered tissues is often hypoxic due to insufficient vascularization, resulting in ischemia injury and necrosis. This is one of the main limitations of current tissue engineering applications aiming at replacing significant tissue volumes. Here, we have explored the use of a new biomaterial, the cell-assembled extracellular matrix (CAM), as a biopaper to biofabricate a vascular system. CAM sheets are a unique, fully biological and fully human material that has already shown stable long-term implantation in humans. We demonstrated, for the first time, the use of this unprocessed human ECM as a microperforated biopaper. Using microvalve dispensing bioprinting, concentrated human endothelial cells (30 millions ml−1) were deposited in a controlled geometry in CAM sheets and cocultured with HSFs. Following multilayer assembly, thick ECM-based constructs fused and supported the survival and maturation of capillary-like structures for up to 26 d of culture. Following 3 weeks of subcutaneous implantation in a mice model, constructs showed limited degradative response and the pre-formed vasculature successfully connected with the host circulatory system to establish active perfusion.This mechanically resilient tissue equivalent has great potential for the creation of more complex implantable tissues, where rapid anastomosis is sine qua non for cell survival and efficient tissue integration.
AUTHOR Bagnol, Romain and Sprecher, Christoph and Peroglio, Marianna and Chevalier, Jerome and Mahou, Redouan and Büchler, Philippe and Richards, Geoff and Eglin, David
Title Coaxial micro-extrusion of a calcium phosphate ink with aqueous solvents improves printing stability, structure fidelity and mechanical properties [Abstract]
Year 2021
Journal/Proceedings Acta Biomaterialia
Reftype
DOI/URL URL DOI
Abstract
Micro-extrusion-based 3D printing of complex geometrical and porous calcium phosphate (CaP) can improve treatment of bone defects through the production of personalized bone substitutes. However, achieving printing and post-printing shape stabilities for the efficient fabrication and application of rapid hardening protocol are still challenging. In this work, the coaxial printing of a self-setting CaP cement with water and ethanol mixtures aiming to increase the ink yield stress upon extrusion and the stability of fabricated structures was explored. Printing height of overhang structure was doubled when aqueous solvents were used and a 2 log increase of the stiffness was achieved post-printing. A standard and fast steam sterilization protocol applied as hardening step on the coaxial printed CaP cement (CPC) ink resulted in constructs with 4 to 5 times higher compressive moduli in comparison to extrusion process in the absence of solvent. This improved mechanical performance is likely due to rapid CPC setting, preventing cracks formation during hardening process. Thus, coaxial micro-extrusion-based 3D printing of a CPC ink with aqueous solvent enhances printability and allows the use of the widespread steam sterilization cycle as a standalone post-processing technique for production of 3D printed personalized CaP bone substitutes. Statement of Significance Coaxial micro-extrusion-based 3D printing of a self-setting CaP cement with water:ethanol mixtures increased the ink yield stress upon extrusion and the stability of fabricated structures. Printing height of overhang structure was doubled when aqueous solvents were used, and a 2 orders of magnitude log increase of the stiffness was achieved post-printing. A fast hardening step consisting of a standard steam sterilization was applied. Four to 5 times higher compressive moduli was obtained for hardened coaxially printed constructs. This improved mechanical performance is likely due to rapid CPC setting in the coaxial printing, preventing cracks formation during hardening process.
AUTHOR Fenelon, Mathilde and Etchebarne, Marion and Siadous, Robin and Grémare, Agathe and Durand, Marlène and Sentilhes, Loic and Catros, Sylvain and Gindraux, Florelle and L'Heureux, Nicolas and Fricain, Jean-Christophe
Title Comparison of amniotic membrane versus the induced membrane for bone regeneration in long bone segmental defects using calcium phosphate cement loaded with BMP-2 [Abstract]
Year 2021
Journal/Proceedings Materials Science and Engineering: C
Reftype
DOI/URL URL DOI
Abstract
Thanks to its biological properties, the human amniotic membrane (HAM) combined with a bone substitute could be a single-step surgical alternative to the two-step Masquelet induced membrane (IM) technique for regeneration of critical bone defects. However, no study has directly compared these two membranes. We first designed a 3D-printed scaffold using calcium phosphate cement (CPC). We assessed its suitability in vitro to support human bone marrow mesenchymal stromal cells (hBMSCs) attachment and osteodifferentiation. We then performed a rat femoral critical size defect to compare the two-step IM technique with a single-step approach using the HAM. Five conditions were compared. Group 1 was left empty. Group 2 received the CPC scaffold loaded with rh-BMP2 (CPC/BMP2). Group 3 and 4 received the CPC/BMP2 scaffold covered with lyophilized or decellularized/lyophilized HAM. Group 5 underwent a two- step induced membrane procedure with insertion of a polymethylmethacrylate (PMMA) spacer followed by, after 4 weeks, its replacement with the CPC/BMP2 scaffold wrapped in the IM. Micro-CT and histomorphometric analysis were performed after six weeks. Results showed that the CPC scaffold supported the proliferation and osteodifferentiation of hBMSCs in vitro. In vivo, the CPC/BMP2 scaffold very efficiently induced bone formation and led to satisfactory healing of the femoral defect, in a single-step, without autograft or the need for any membrane covering. In this study, there was no difference between the two-step induced membrane procedure and a single step approach. However, the results indicated that none of the tested membranes further enhanced bone healing compared to the CPC/BMP2 group.
AUTHOR Petretta, Mauro and Gambardella, Alessandro and Boi, Marco and Berni, Matteo and Cavallo, Carola and Marchiori, Gregorio and Maltarello, Maria Cristina and Bellucci, Devis and Fini, Milena and Baldini, Nicola and Grigolo, Brunella and Cannillo, Valeria
Title Composite Scaffolds for Bone Tissue Regeneration Based on PCL and Mg-Containing Bioactive Glasses [Abstract]
Year 2021
Journal/Proceedings Biology
Reftype
DOI/URL DOI
Abstract
Polycaprolactone (PCL) is widely used in additive manufacturing for the construction of scaffolds for tissue engineering because of its good bioresorbability, biocompatibility, and processability. Nevertheless, its use is limited by its inadequate mechanical support, slow degradation rate and the lack of bioactivity and ability to induce cell adhesion and, thus, bone tissue regeneration. In this study, we fabricated 3D PCL scaffolds reinforced with a novel Mg-doped bioactive glass (Mg-BG) characterized by good mechanical properties and biological reactivity. An optimization of the printing parameters and scaffold fabrication was performed; furthermore, an extensive microtopography characterization by scanning electron microscopy and atomic force microscopy was carried out. Nano-indentation tests accounted for the mechanical properties of the scaffolds, whereas SBF tests and cytotoxicity tests using human bone-marrow-derived mesenchymal stem cells (BM-MSCs) were performed to evaluate the bioactivity and in vitro viability. Our results showed that a 50/50 wt% of the polymer-to-glass ratio provides scaffolds with a dense and homogeneous distribution of Mg-BG particles at the surface and roughness twice that of pure PCL scaffolds. Compared to pure PCL (hardness H = 35 ± 2 MPa and Young’s elastic modulus E = 0.80 ± 0.05 GPa), the 50/50 wt% formulation showed H = 52 ± 11 MPa and E = 2.0 ± 0.2 GPa, hence, it was close to those of trabecular bone. The high level of biocompatibility, bioactivity, and cell adhesion encourages the use of the composite PCL/Mg-BG scaffolds in promoting cell viability and supporting mechanical loading in the host trabecular bone.
AUTHOR Bello, Thomas and Paindelli, Claudia and Diaz-Gomez, Luis A. and Melchiorri, Anthony and Mikos, Antonios G. and Nelson, Peter S. and Dondossola, Eleonora and Gujral, Taranjit S.
Title Computational modeling identifies multitargeted kinase inhibitors as effective therapies for metastatic, castration-resistant prostate cancer [Abstract]
Year 2021
Journal/Proceedings Proceedings of the National Academy of Sciences
Reftype
DOI/URL URL DOI
Abstract
Metastatic, castration-resistant prostate cancer (mCRPC) is an advanced prostate cancer with limited therapeutic options and poor patient outcomes. To investigate whether multitargeted kinase inhibitors (KIs) represent an opportunity for mCRPC drug development, we applied machine learning{textendash}based functional screening and identified two KIs, PP121 and SC-1, which demonstrated strong suppression of CRPC growth in vitro and in vivo. Furthermore, we show the marked ability of these KIs to improve on standard-of-care chemotherapy in both tumor response and survival, suggesting that combining multitargeted KIs with chemotherapy represents a promising avenue for mCRPC treatment. Overall, our findings demonstrate the application of a multidisciplinary strategy that blends bench science with machine-learning approaches for rapidly identifying KIs that result in desired phenotypic effects.Castration-resistant prostate cancer (CRPC) is an advanced subtype of prostate cancer with limited therapeutic options. Here, we applied a systems-based modeling approach called kinome regularization (KiR) to identify multitargeted kinase inhibitors (KIs) that abrogate CRPC growth. Two predicted KIs, PP121 and SC-1, suppressed CRPC growth in two-dimensional in vitro experiments and in vivo subcutaneous xenografts. An ex vivo bone mimetic environment and in vivo tibia xenografts revealed resistance to these KIs in bone. Combining PP121 or SC-1 with docetaxel, standard-of-care chemotherapy for late-stage CRPC, significantly reduced tibia tumor growth in vivo, decreased growth factor signaling, and vastly extended overall survival, compared to either docetaxel monotherapy. These results highlight the utility of computational modeling in forming physiologically relevant predictions and provide evidence for the role of multitargeted KIs as chemosensitizers for late-stage, metastatic CRPC.All study data are included in the article and/or supporting information.
AUTHOR Zhang, Xiao and Liu, Yang and Luo, Chunyang and Zhai, Chenjun and Li, Zuxi and Zhang, Yi and Yuan, Tao and Dong, Shilei and Zhang, Jiyong and Fan, Weimin
Title Crosslinker-free silk/decellularized extracellular matrix porous bioink for 3D bioprinting-based cartilage tissue engineering [Abstract]
Year 2021
Journal/Proceedings Materials Science and Engineering: C
Reftype
DOI/URL URL DOI
Abstract
As cartilage tissue lacks the innate ability to mount an adequate regeneration response, damage to it is detrimental to the quality of life of the subject. The emergence of three-dimensional bioprinting (3DBP) technology presents an opportunity to repair articular cartilage defects. However, widespread adoption of this technique has been impeded by difficulty in preparing a suitable bioink and the toxicity inherent in the chemical crosslinking process of most bioinks. Our objective was to develop a crosslinker-free bioink with the same biological activity as the original cartilage extracellular matrix (ECM) and good mechanical strength. We prepared bioinks containing different concentrations of silk fibroin and decellularized extracellular matrix (SF-dECM bioinks) mixed with bone marrow mesenchymal stem cells (BMSCs) for 3D bioprinting. SF and dECM interconnect with each other through physical crosslinking and entanglement. A porous structure was formed by removing the polyethylene glycol from the SF-dECM bioink. The results showed the SF-dECM construct had a suitable mechanical strength and degradation rate, and the expression of chondrogenesis-specific genes was found to be higher than that of the SF control construct group. Finally, we confirmed that a SF-dECM construct that was designed to release TGF-β3 had the ability to promote chondrogenic differentiation of BMSCs and provided a good cartilage repair environment, suggesting it is an ideal scaffold for cartilage tissue engineering.
AUTHOR Li, Huijun and Zheng, Han and Tan, Yu Jun and Tor, Shu Beng and Zhou, Kun
Title Development of an Ultrastretchable Double-Network Hydrogel for Flexible Strain Sensors [Abstract]
Year 2021
Journal/Proceedings ACS Appl. Mater. Interfaces
Reftype
DOI/URL DOI
Abstract
The weak mechanical properties of hydrogels due to the inefficient dissipation of energy in the intrinsic structures limit their practical applications. Here, a double-network (DN) hydrogel has been developed by integrating an ionically cross-linked agar network, a covalently cross-linked acrylic acid (AAC) network, and the dynamic and reversible ionically cross-linked coordination between the AAC chains and Fe3+ ions. The proposed model reveals the mechanisms of the improved mechanical performances in the DN agar/AAC-Fe3+ hydrogel. The hydrogen-bond cross-linked double helices of agar and ionic-coordination interactions of AAC-Fe3+ can be temporarily sacrificed during large deformation to readily dissipate the energy, whereas the reversible AAC-Fe3+ interactions can be regenerated after stress relief, which greatly increases the material toughness. The developed DN hydrogel demonstrates a remarkable stretchability with a break strain up to 3174.3%, high strain sensitivity with the gauge factor being 0.83 under a strain of 1000%, and good 3D printability, making the material a desirable candidate for fabricating flexible strain sensors, electronic skin, and soft robots. The weak mechanical properties of hydrogels due to the inefficient dissipation of energy in the intrinsic structures limit their practical applications. Here, a double-network (DN) hydrogel has been developed by integrating an ionically cross-linked agar network, a covalently cross-linked acrylic acid (AAC) network, and the dynamic and reversible ionically cross-linked coordination between the AAC chains and Fe3+ ions. The proposed model reveals the mechanisms of the improved mechanical performances in the DN agar/AAC-Fe3+ hydrogel. The hydrogen-bond cross-linked double helices of agar and ionic-coordination interactions of AAC-Fe3+ can be temporarily sacrificed during large deformation to readily dissipate the energy, whereas the reversible AAC-Fe3+ interactions can be regenerated after stress relief, which greatly increases the material toughness. The developed DN hydrogel demonstrates a remarkable stretchability with a break strain up to 3174.3%, high strain sensitivity with the gauge factor being 0.83 under a strain of 1000%, and good 3D printability, making the material a desirable candidate for fabricating flexible strain sensors, electronic skin, and soft robots.
AUTHOR Puertas-Bartolomé, María and Włodarczyk-Biegun, Małgorzata K. and del Campo, Aránzazu and Vázquez-Lasa, Blanca and San Román, Julio
Title Development of bioactive catechol functionalized nanoparticles applicable for 3D bioprinting [Abstract]
Year 2021
Journal/Proceedings Materials Science and Engineering: C
Reftype
DOI/URL URL DOI
Abstract
Efficient wound treatments to target specific events in the healing process of chronic wounds constitute a significant aim in regenerative medicine. In this sense, nanomedicine can offer new opportunities to improve the effectiveness of existing wound therapies. The aim of this study was to develop catechol bearing polymeric nanoparticles (NPs) and to evaluate their potential in the field of wound healing. Thus, NPs wound healing promoting activities, potential for drug encapsulation and controlled release, and further incorporation in a hydrogel bioink formulation to fabricate cell-laden 3D scaffolds are studied. NPs with 2 and 29 M % catechol contents (named NP2 and NP29) were obtained by nanoprecipitation and presented hydrodynamic diameters of 100 and 75 nm respectively. These nanocarriers encapsulated the hydrophobic compound coumarin-6 with 70% encapsulation efficiency values. In cell culture studies, the NPs had a protective effect in RAW 264.7 macrophages against oxidative stress damage induced by radical oxygen species (ROS). They also presented a regulatory effect on the inflammatory response of stimulated macrophages and promoted upregulation of the vascular endothelial growth factor (VEGF) in fibroblasts and endothelial cells. In particular, NP29 were used in a hydrogel bioink formulation using carboxymethyl chitosan and hyaluronic acid as polymeric matrices. Using a reactive mixing bioprinting approach, NP-loaded hydrogel scaffolds with good structural integrity, shape fidelity and homogeneous NPs dispersion, were obtained. The in vitro catechol NPs release profile of the printed scaffolds revealed a sustained delivery. The bioprinted scaffolds supported viability and proliferation of encapsulated L929 fibroblasts over 14 days. We envision that the catechol functionalized NPs and resulting bioactive bioink presented in this work offer promising advantages for wound healing applications, as they: 1) support controlled release of bioactive catechol NPs to the wound site; 2) can incorporate additional therapeutic functions by co-encapsulating drugs; 3) can be printed into 3D scaffolds with tailored geometries based on patient requirements.
AUTHOR Kamdem Tamo, Arnaud and Doench, Ingo and Walter, Lukas and Montembault, Alexandra and Sudre, Guillaume and David, Laurent and Morales-Helguera, Aliuska and Selig, Mischa and Rolauffs, Bernd and Bernstein, Anke and Hoenders, Daniel and Walther, Andreas and Osorio-Madrazo, Anayancy
Title Development of Bioinspired Functional Chitosan/Cellulose Nanofiber 3D Hydrogel Constructs by 3D Printing for Application in the Engineering of Mechanically Demanding Tissues [Abstract]
Year 2021
Journal/Proceedings Polymers
Reftype
DOI/URL DOI
Abstract
Soft tissues are commonly fiber-reinforced hydrogel composite structures, distinguishable from hard tissues by their low mineral and high water content. In this work, we proposed the development of 3D printed hydrogel constructs of the biopolymers chitosan (CHI) and cellulose nanofibers (CNFs), both without any chemical modification, which processing did not incorporate any chemical crosslinking. The unique mechanical properties of native cellulose nanofibers offer new strategies for the design of environmentally friendly high mechanical performance composites. In the here proposed 3D printed bioinspired CNF-filled CHI hydrogel biomaterials, the chitosan serves as a biocompatible matrix promoting cell growth with balanced hydrophilic properties, while the CNFs provide mechanical reinforcement to the CHI-based hydrogel. By means of extrusion-based printing (EBB), the design and development of 3D functional hydrogel scaffolds was achieved by using low concentrations of chitosan (2.0–3.0% (w/v)) and cellulose nanofibers (0.2–0.4% (w/v)). CHI/CNF printed hydrogels with good mechanical performance (Young’s modulus 3.0 MPa, stress at break 1.5 MPa, and strain at break 75%), anisotropic microstructure and suitable biological response, were achieved. The CHI/CNF composition and processing parameters were optimized in terms of 3D printability, resolution, and quality of the constructs (microstructure and mechanical properties), resulting in good cell viability. This work allows expanding the library of the so far used biopolymer compositions for 3D printing of mechanically performant hydrogel constructs, purely based in the natural polymers chitosan and cellulose, offering new perspectives in the engineering of mechanically demanding hydrogel tissues like intervertebral disc (IVD), cartilage, meniscus, among others.
AUTHOR Curti, Filis and Drăgușin, Diana-Maria and Serafim, Andrada and Iovu, Horia and Stancu, Izabela-Cristina
Title Development of thick paste-like inks based on superconcentrated gelatin/alginate for 3D printing of scaffolds with shape fidelity and stability [Abstract]
Year 2021
Journal/Proceedings Materials Science and Engineering: C
Reftype
DOI/URL URL DOI
Abstract
Shape fidelity and integrity are serious challenges in the 3D printing of hydrogel precursors, as they can influence the overall performance of 3D scaffolds. This work reports the development of superconcentrated inks based on sodium alginate and fish gelatin as an appealing strategy to satisfy such challenges and dictate the quality of the printed scaffolds, without using crosslinking strategies during 3D printing. SEM micrographs and micro-CT images indicate the homogeneous distribution of the polysaccharide in the gelatin-based matrix, suggesting its potential to act as a reinforcing additive. The high concentration of gelatin aqueous solution (50 wt%) and substantial incorporation of alginate have facilitated the highly accurate printability and influence the in vitro stability and mechanical properties of the printed scaffolds. An improvement of the stiffness is dictated by the increase of alginate concentration from 20 wt% to 25 wt%, and an increase of Young modulus with about 46% is reached, confirming the reinforcing effect of polysaccharide. This study highlights the potential of paste-type inks to provide high resolution 3D printed structures with appealing structural and dimensional stability, in vitro degradability and mechanical properties for biomedical applications.
AUTHOR Dai, Michèle and Belaïdi, Jean-Philippe and Fleury, Guillaume and Garanger, Elisabeth and Rielland, Maïté and Schultze, Xavier and Lecommandoux, Sébastien
Title Elastin-like Polypeptide-Based Bioink: A Promising Alternative for 3D Bioprinting
Year 2021
Journal/Proceedings Biomacromolecules
Reftype
DOI/URL DOI
AUTHOR Shiwarski,Daniel J. and Hudson,Andrew R. and Tashman,Joshua W. and Feinberg,Adam W.
Title Emergence of FRESH 3D printing as a platform for advanced tissue biofabrication
Year 2021
Journal/Proceedings APL Bioengineering
Reftype
DOI/URL DOI
AUTHOR Ravanbakhsh, Hossein and Karamzadeh, Vahid and Bao, Guangyu and Mongeau, Luc and Juncker, David and Zhang, Yu Shrike
Title Emerging Technologies in Multi-Material Bioprinting [Abstract]
Year 2021
Journal/Proceedings Advanced Materials
Reftype
DOI/URL DOI
Abstract
Abstract Bioprinting, within the emerging field of biofabrication, aims at the fabrication of functional biomimetic constructs. Different 3D bioprinting techniques have been adapted to bioprint cell-laden bioinks. However, single-material bioprinting techniques oftentimes fail to reproduce the complex compositions and diversity of native tissues. Multi-material bioprinting as an emerging approach enables the fabrication of heterogeneous multi-cellular constructs that replicate their host microenvironments better than single-material approaches. Here, bioprinting modalities are reviewed, their being adapted to multi-material bioprinting is discussed, and their advantages and challenges, encompassing both custom-designed and commercially available technologies are analyzed. A perspective of how multi-material bioprinting opens up new opportunities for tissue engineering, tissue model engineering, therapeutics development, and personalized medicine is offered.
AUTHOR Chen, Shengyang and Shi, Qian and Jang, Taesik and Ibrahim, Mohammed Shahrudin Bin and Deng, Jingyu and Ferracci, Gaia and Tan, Wen See and Cho, Nam-Joon and Song, Juha
Title Engineering Natural Pollen Grains as Multifunctional 3D Printing Materials [Abstract]
Year 2021
Journal/Proceedings Advanced Functional Materials
Reftype
DOI/URL DOI
Abstract
Abstract The development of multifunctional 3D printing materials from sustainable natural resources is a high priority in additive manufacturing. Using an eco-friendly method to transform hard pollen grains into stimulus-responsive microgel particles, we engineered a pollen-derived microgel suspension that can serve as a functional reinforcement for composite hydrogel inks and as a supporting matrix for versatile freeform 3D printing systems. The pollen microgel particles enabled the printing of composite inks and improved the mechanical and physiological stabilities of alginate and hyaluronic acid hydrogel scaffolds for 3D cell culture applications. Moreover, the particles endowed the inks with stimulus-responsive controlled release properties. The suitability of the pollen microgel suspension as a supporting matrix for freeform 3D printing of alginate and silicone rubber inks was demonstrated and optimized by tuning the rheological properties of the microgel. Compared with other classes of natural materials, pollen grains have several compelling features, including natural abundance, renewability, affordability, processing ease, monodispersity, and tunable rheological features, which make them attractive candidates to engineer advanced materials for 3D printing applications.
AUTHOR Kjar, Andrew and McFarland, Bailey and Mecham, Keetch and Harward, Nathan and Huang, Yu
Title Engineering of tissue constructs using coaxial bioprinting [Abstract]
Year 2021
Journal/Proceedings Bioactive Materials
Reftype
DOI/URL URL DOI
Abstract
Bioprinting is a rapidly developing technology for the precise design and manufacture of tissues in various biological systems or organs. Coaxial extrusion bioprinting, an emergent branch, has demonstrated a strong potential to enhance bioprinting's engineering versatility. Coaxial bioprinting assists in the fabrication of complex tissue constructs, by enabling concentric deposition of biomaterials. The fabricated tissue constructs started with simple, tubular vasculature but have been substantially developed to integrate complex cell composition and self-assembly, ECM patterning, controlled release, and multi-material gradient profiles. This review article begins with a brief overview of coaxial printing history, followed by an introduction of crucial engineering components. Afterward, we review the recent progress and untapped potential in each specific organ or biological system, and demonstrate how coaxial bioprinting facilitates the creation of tissue constructs. Ultimately, we conclude that this growing technology will contribute significantly to capabilities in the fields of in vitro modeling, pharmaceutical development, and clinical regenerative medicine.
AUTHOR Firipis, Kate and Nisbet, David R. and Franks, Stephanie J. and Kapsa, Robert M. I. and Pirogova, Elena and Williams, Richard J. and Quigley, Anita
Title Enhancing Peptide Biomaterials for Biofabrication [Abstract]
Year 2021
Journal/Proceedings Polymers
Reftype
DOI/URL URL DOI
Abstract
Biofabrication using well-matched cell/materials systems provides unprecedented opportunities for dealing with human health issues where disease or injury overtake the body’s native regenerative abilities. Such opportunities can be enhanced through the development of biomaterials with cues that appropriately influence embedded cells into forming functional tissues and organs. In this context, biomaterials’ reliance on rigid biofabrication techniques needs to support the incorporation of a hierarchical mimicry of local and bulk biological cues that mimic the key functional components of native extracellular matrix. Advances in synthetic self-assembling peptide biomaterials promise to produce reproducible mimics of tissue-specific structures and may go some way in overcoming batch inconsistency issues of naturally sourced materials. Recent work in this area has demonstrated biofabrication with self-assembling peptide biomaterials with unique biofabrication technologies to support structural fidelity upon 3D patterning. The use of synthetic self-assembling peptide biomaterials is a growing field that has demonstrated applicability in dermal, intestinal, muscle, cancer and stem cell tissue engineering.
AUTHOR Paindelli, Claudia and Casarin, Stefano and Wang, Feng and Diaz-Gomez, Luis and Zhang, Jianhua and Mikos, Antonios G. and Logothetis, Christopher J. and Friedl, Peter and Dondossola, Eleonora
Title Enhancing Radium 223 treatment efficacy by anti-beta 1 integrin targeting [Abstract]
Year 2021
Journal/Proceedings Journal of Nuclear Medicine
Reftype
DOI/URL URL DOI
Abstract
Radium 223 (223Ra) is an α-emitter approved for the treatment of bone metastatic prostate cancer (PCa), which exerts direct cytotoxicity towards PCa cells near the bone interface, whereas cells positioned in the core respond poorly, due to short α-particle penetrance. β1 integrin (β1I) interference has been shown to increase radiosensitivity and significantly enhance external beam radiation efficiency. We hypothesized that targeting β1I would improve 223Ra outcome. We tested the effect of combining 223Ra and anti-β1I antibody treatment in PC3 and C4-2B PCa cell models expressing high and low β1I levels, respectively. In vivo tumor growth was evaluated through bioluminescence. Cellular and molecular determinants of response were analyzed by ex vivo three-dimensional imaging of bone lesions, proteomic analysis and further confirmed by computational modeling and in vitro functional analysis in tissue-engineered bone mimetic systems. Interference with β1I combined with 223Ra reduced PC3 cell growth in bone and significantly improved overall mouse survival, while no change was achieved in C4-2B tumors. Anti-β1I treatment decreased PC3 tumor cell mitosis index and spatially expanded 223Ra lethal effects two-fold, in vivo and in silico. Regression was paralleled by decreased expression of radio-resistance mediators. Targeting β1I significantly improves 223Ra outcome and points towards combinatorial application in PCa tumors with high β1I expression.
AUTHOR Oliveira, Hugo and Médina, Chantal and Stachowicz, Marie-Laure and Paiva dos Santos, Bruno and Chagot, Lise and Dusserre, Nathalie and Fricain, Jean-Christophe
Title Extracellular matrix (ECM)-derived bioinks designed to foster vasculogenesis and neurite outgrowth: Characterization and bioprinting [Abstract]
Year 2021
Journal/Proceedings Bioprinting
Reftype
DOI/URL URL DOI
Abstract
The field of bioprinting has shown a tremendous development in recent years, focusing on the development of advanced in vitro models and on regeneration approaches. In this scope, the lack of suitable biomaterials that can be efficiently formulated as printable bioinks, while supporting specific cellular events, is currently considered as one of the main limitations in the field. Indeed, extracellular matrix (ECM)-derived biomaterials formulated to enable printability and support cellular response, for instance via integrin binding, are eagerly awaited in the field of bioprinting. Several bioactive laminin sequences, including peptides such as YIGSR and IKVAV, have been identified to promote endothelial cell attachment and/or neurite outgrowth and guidance, respectively. Here, we show the development of two distinct bioinks, designed to foster vasculogenesis or neurogenesis, based on methacrylated collagen and hyaluronic acid (CollMA and HAMA, respectively), both relevant ECM-derived polymers, and on their combination with cysteine-flanked laminin-derived peptides. Using this strategy, it was possible to optimize the bioink printability, by tuning CollMA and HAMA concentration and ratio, and modulate their bioactivity, through adjustments in the cell-active peptide sequence spatial density, without compromising cell viability. We demonstrated that cell-specific bioinks could be customized for the bioprinting of both human umbilical vein cord endothelial cells (HUVECs) or adult rat sensory neurons from the dorsal root ganglia, and could stimulate both vasculogenesis and neurite outgrowth, respectively. This approach holds great potential as it can be tailored to other cellular models, due to its inherent capacity to accommodate different peptide compositions and to generate complex peptide mixtures and/or gradients.
AUTHOR Tarun Agarwal and Marco Costantini and Tapas Kumar Maiti
Title Extrusion 3D printing with Pectin-based ink formulations: Recent trends in tissue engineering and food manufacturing [Abstract]
Year 2021
Journal/Proceedings Biomedical Engineering Advances
Reftype
DOI/URL URL DOI
Abstract
3D printing technologies are rapidly revolutionizing all manufacturing sectors due to their ability to create objects with complex geometries in a reproducible and automated manner using material/cell-based formulations, precisely termed printing inks. In this regard, pectin, a naturally occurring plant polysaccharide, has been proposed as a potential component of ink formulations. In this mini-review, we would overview the most recent advances made with pectin-based inks in the fields of tissue engineering and food manufacturing. We also discuss various strategies used to formulate 3D printable pectin inks. Finally, various challenges and prospects for future development are discussed.
AUTHOR Götz, Lisa-Marie and Holeczek, Katharina and Groll, Jürgen and Jüngst, Tomasz and Gbureck, Uwe
Title Extrusion-Based 3D Printing of Calcium Magnesium Phosphate Cement Pastes for Degradable Bone Implants [Abstract]
Year 2021
Journal/Proceedings Materials
Reftype
DOI/URL URL DOI
Abstract
This study aimed to develop printable calcium magnesium phosphate pastes that harden by immersion in ammonium phosphate solution post-printing. Besides the main mineral compound, biocompatible ceramic, magnesium oxide and hydroxypropylmethylcellulose (HPMC) were the crucial components. Two pastes with different powder to liquid ratios of 1.35 g/mL and 1.93 g/mL were characterized regarding their rheological properties. Here, ageing over the course of 24 h showed an increase in viscosity and extrusion force, which was attributed to structural changes in HPMC as well as the formation of magnesium hydroxide by hydration of MgO. The pastes enabled printing of porous scaffolds with good dimensional stability and enabled a setting reaction to struvite when immersed in ammonium phosphate solution. Mechanical performance under compression was approx. 8–20 MPa as a monolithic structure and 1.6–3.0 MPa for printed macroporous scaffolds, depending on parameters such as powder to liquid ratio, ageing time, strand thickness and distance.
AUTHOR Wibowo, Arie and Tajalla, Gusti U. N. and Marsudi, Maradhana A. and Cooper, Glen and Asri, Lia A.T.W. and Liu, Fengyuan and Ardy, Husaini and Bartolo, Paulo J.D.S.
Title Green Synthesis of Silver Nanoparticles Using Extract of Cilembu Sweet Potatoes (Ipomoea batatas L var. Rancing) as Potential Filler for 3D Printed Electroactive and Anti-Infection Scaffolds [Abstract]
Year 2021
Journal/Proceedings Molecules
Reftype
DOI/URL URL DOI
Abstract
Electroactive biomaterials are fascinating for tissue engineering applications because of their ability to deliver electrical stimulation directly to cells, tissue, and organs. One particularly attractive conductive filler for electroactive biomaterials is silver nanoparticles (AgNPs) because of their high conductivity, antibacterial activity, and ability to promote bone healing. However, production of AgNPs involves a toxic reducing agent which would inhibit biological scaffold performance. This work explores facile and green synthesis of AgNPs using extract of Cilembu sweet potato and studies the effect of baking and precursor concentrations (1, 10 and 100 mM) on AgNPs’ properties. Transmission electron microscope (TEM) results revealed that the smallest particle size of AgNPs (9.95 ± 3.69 nm) with nodular morphology was obtained by utilization of baked extract and ten mM AgNO3. Polycaprolactone (PCL)/AgNPs scaffolds exhibited several enhancements compared to PCL scaffolds. Compressive strength was six times greater (3.88 ± 0.42 MPa), more hydrophilic (contact angle of 76.8 ± 1.7°), conductive (2.3 ± 0.5 × 10−3 S/cm) and exhibited anti-bacterial properties against Staphylococcus aureus ATCC3658 (99.5% reduction of surviving bacteria). Despite the promising results, further investigation on biological assessment is required to obtain comprehensive study of this scaffold. This green synthesis approach together with the use of 3D printing opens a new route to manufacture AgNPs-based electroactive with improved anti-bacterial properties without utilization of any toxic organic solvents.
AUTHOR Zhang, Danwei and Jonhson, Win and Herng, Tun Seng and Xu, Xi and Liu, Xiaojing and Pan, Liang-ming and He, Hui and Ding, Jun
Title High Temperature Co-firing of 3D-Printed Al-ZnO/Al2O3 Multi-Material Two-Phase Flow Sensor [Abstract]
Year 2021
Journal/Proceedings Journal of Materiomics
Reftype
DOI/URL URL DOI
Abstract
Sensors are crucial in the understanding of machines working under high temperatures and high-pressure conditions. Current devices utilize polymeric materials as electrical insulators which pose a challenge in the device’s lifespan. Ceramics, on the other hand, is robust and able to withstand high temperature and pressure. For such applications, a co-fired ceramic device which can provide both electrical conductivity and insulation is beneficial and acts as a superior candidate for sensor devices. In this paper, we propose a novel fabrication technique of complex multi-ceramics structures via 3D printing. This fabrication methodology increases both the geometrical complexity and the device’s shape precision. Structural ceramics (alumina) was employed as the electrical insulator whilst providing mechanical rigidity while a functional ceramic (alumina-doped zinc oxide) was employed as the electrically conductive material. The addition of sintering additives, tailoring the printing pastes’ solid loadings and heat treatment profile resolves multi-materials printing challenges such as shrinkage disparity and densification matching. Through high-temperature co-firing of ceramics (HTCC) technology, dense high quality functional multi-ceramics structures are achieved. The proposed fabrication methodology paves the way for multi-ceramics sensors to be utilized in high temperature and pressure systems in the near future.
AUTHOR Tan, Edgar Y. S. and Suntornnond, Ratima and Yeong, Wai Yee
Title High-Resolution Novel Indirect Bioprinting of Low-Viscosity Cell-Laden Hydrogels via Model-Support Bioink Interaction [Abstract]
Year 2021
Journal/Proceedings 3D Printing and Additive Manufacturing
Reftype
DOI/URL DOI
Abstract
Abstract Bioprinting of unmodified soft extracellular matrix into complex 3D structures has remained challenging to fabricate. Herein, we established a novel process for the printing of low-viscosity hydrogel by using a unique support technique to retain the structural integrity of the support structure. We demonstrated that this process of printing could be used for different types of hydrogel, ranging from fast crosslinking gelatin methacrylate to slow crosslinking collagen type I. In addition, we evaluated the biocompatibility of the process by observing the effects of the cytotoxicity of L929 and the functionality of the human umbilical vein endothelium primary cells after printing. The results show that the bioprinted construct provided excellent biocompatibility as well as supported cell growth and differentiation. Thus, this is a novel technique that can be potentially used to enhance the resolution of the extrusion-based bioprinter.
AUTHOR Lechner, Annika and Trossmann, Vanessa T. and Scheibel, Thomas
Title Impact of Cell Loading of Recombinant Spider Silk Based Bioinks on Gelation and Printability [Abstract]
Year 2021
Journal/Proceedings Macromolecular Bioscience
Reftype
DOI/URL DOI
Abstract
Abstract Printability of bioinks encompasses considerations concerning rheology and extrudability, characterization of filament formation, shape fidelity, cell viability and post-printing cellular development. Recombinant spider silk based hydrogels might be a suitable material to be used in bioinks, i.e. a formulation of cells and materials to be used for bioprinting. Here, the high shape fidelity of spider silk ink is shown by bioprinting the shape and size of a human aortic valve. Further the influence of the encapsulation of cells has been evaluated on spider silk hydrogel formation, hydrogel mechanics, and shape fidelity upon extrusion based bioprinting. It is shown that the presence of cells impacts gelation of spider silk proteins differently depending on the used silk variant. RGD-modified spider silk hydrogels are physically crosslinked by the cells, while there is no active interaction between cells and un-tagged spider silk proteins. Strikingly, even at cell densities up to ten million cells/ml, cell viability is high after extrusion based printing which is a significant prerequisite for future applications. Shape fidelity of the printed constructs is demonstrated using a filament collapse test in absence and presence of human cells. This article is protected by copyright. All rights reserved
AUTHOR Paulo Roberto {Lopes Nalesso} and Weiguang Wang and Yanhao Hou and Leonardo Bagne and Amanda Tavares Pereira and Julia Venturini Helaehil and Thiago Antônio {Moretti de Andrade} and Gabriela Bortolança Chiarotto and Paulo Bártolo and Guilherme Ferreira Caetano
Title In vivo investigation of 3D printed polycaprolactone/graphene electro-active bone scaffolds [Abstract]
Year 2021
Journal/Proceedings Bioprinting
Reftype
DOI/URL URL DOI
Abstract
Additive manufactured scaffolds are widely used as 3D support structures for tissue engineering. This paper investigates the mechanisms behind bone regeneration due to the combined use of 3D printed poly (ϵ-caprolactone)/graphene (PCL/G) electro-active scaffolds and electrical stimulation. A comprehensive in vivo study was conducted to assess the proposed approach, using a rat model. Results show that the combined use of electro-active scaffolds and electrical stimulation therapy accelerates the bone regeneration process and the formation of more organized new bone, through fast angiogenesis, and a rapid transition to the mineralization and bone remodelling phase. The mechanism is investigated and explained.
AUTHOR e Silva, Edney P. and Huang, Boyang and Helaehil, Júlia V. and Nalesso, Paulo R. L. and Bagne, Leonardo and de Oliveira, Maraiara A. and Albiazetti, Gabriela C. C. and Aldalbahi, Ali and El-Newehy, Mohamed and Santamaria-Jr, Milton and Mendonça, Fernanda A. S. and Bártolo, Paulo and Caetano, Guilherme F.
Title In vivo study of conductive 3D printed PCL/MWCNTs scaffolds with electrical stimulation for bone tissue engineering [Abstract]
Year 2021
Journal/Proceedings Bio-Design and Manufacturing
Reftype e Silva2021
DOI/URL DOI
Abstract
Critical bone defects are considered one of the major clinical challenges in reconstructive bone surgery. The combination of 3D printed conductive scaffolds and exogenous electrical stimulation (ES) is a potential favorable approach for bone tissue repair. In this study, 3D conductive scaffolds made with biocompatible and biodegradable polycaprolactone (PCL) and multi-walled carbon nanotubes (MWCNTs) were produced using the extrusion-based additive manufacturing to treat large calvary bone defects in rats. Histology results show that the use of PCL/MWCNTs scaffolds and ES contributes to thicker and increased bone tissue formation within the bone defect. Angiogenesis and mineralization are also significantly promoted using high concentration of MWCNTs (3 wt%) and ES. Moreover, scaffolds favor the tartrate-resistant acid phosphatase (TRAP) positive cell formation, while the addition of MWCNTs seems to inhibit the osteoclastogenesis but present limited effects on the osteoclast functionalities (receptor activator of nuclear factor κβ ligand (RANKL) and osteoprotegerin (OPG) expressions). The use of ES promotes the osteoclastogenesis and RANKL expressions, showing a dominant effect in the bone remodeling process. These results indicate that the combination of 3D printed conductive PCL/MWCNTs scaffold and ES is a promising strategy to treat critical bone defects and provide a cue to establish an optimal protocol to use conductive scaffolds and ES for bone tissue engineering.
AUTHOR Zamani, Yasaman and Amoabediny, Ghassem and Mohammadi, Javad and Zandieh-Doulabi, Behrouz and Klein-Nulend, Jenneke and Helder, Marco N.
Title Increased Osteogenic Potential of Pre-Osteoblasts on Three-Dimensional Printed Scaffolds Compared to Porous Scaffolds for Bone Regeneration [Abstract]
Year 2021
Journal/Proceedings Iranian Biomedical Journal
Reftype
DOI/URL URL DOI
Abstract
Background: One of the main challenges with conventional scaffold fabrication methods is the inability to control scaffold architecture. Recently, scaffolds with controlled shape and architecture have been fabricated using three-dimensional printing (3DP). Herein, we aimed to determine whether the much tighter control of microstructure of 3DP poly(lactic-co-glycolic) acid/β-tricalcium phosphate (PLGA/β-TCP) scaffolds is more effective in promoting osteogenesis than porous scaffolds produced by solvent casting/porogen leaching. Methods: Physical and mechanical properties of porous and 3DP scaffolds were studied. The response of pre-osteoblasts to the scaffolds was analyzed after 14 days. Results: The 3DP scaffolds had a smoother surface (Ra: 22 ± 3 µm) relative to the highly rough surface of porous scaffolds (Ra: 110 ± 15 µm). Water contact angle was 112 ± 4° on porous and 76 ± 6° on 3DP scaffolds. Porous and 3DP scaffolds had the pore size of 408 ± 90 and 315 ± 17 µm and porosity of 85 ± 5% and 39 ± 7%, respectively. Compressive strength of 3DP scaffolds (4.0 ± 0.3 MPa) was higher than porous scaffolds (1.7 ± 0.2 MPa). Collagenous matrix deposition was similar on both scaffolds. Cells proliferated from day 1 to day 14 by fourfold in porous and by 3.8-fold in 3DP scaffolds. Alkaline phosphatase (ALP) activity was 21-fold higher in 3DP scaffolds than porous scaffolds. Conclusion: The 3DP scaffolds show enhanced mechanical properties and ALP activity compared to porous scaffolds in vitro, suggesting that 3DP PLGA/β-TCP scaffolds are possibly more favorable for bone formation.
AUTHOR Daskalakis, Evangelos and Liu, Fengyuan and Huang, Boyang and Acar, Anil A. and Cooper, Glen and Weightman, Andrew and Blunn, Gordon and Koç, Bahattin and Bartolo, Paulo
Title Investigating the Influence of Architecture and Material Composition of 3D Printed Anatomical Design Scaffolds for Large Bone Defects [Abstract]
Year 2021
Journal/Proceedings International Journal of Bioprinting; Vol 7, No 2 (2021)
Reftype
DOI/URL URL
Abstract
There is a significant unmet clinical need to prevent amputations due to large bone loss injuries. We are addressing this problem by developing a novel, cost-effective osseointegrated prosthetic solution based on the use of modular pieces, bone bricks, made with biocompatible and biodegradable materials that fit together in a Lego-like way to form the prosthesis. This paper investigates the anatomical designed bone bricks with different architectures, pore size gradients, and material compositions. Polymer and polymer-composite 3D printed bone bricks are extensively morphological, mechanical, and biological characterized. Composite bone bricks were produced by mixing polycaprolactone (PCL) with different levels of hydroxyapatite (HA) and β-tri-calcium phosphate (TCP). Results allowed to establish a correlation between bone bricks architecture and material composition and bone bricks performance. Reinforced bone bricks showed improved mechanical and biological results. Best mechanical properties were obtained with PCL/TCP bone bricks with 38 double zig-zag filaments and 14 spiral-like pattern filaments, while the best biological results were obtained with PCL/HA bone bricks based on 25 double zig-zag filaments and 14 spiral-like pattern filaments.
AUTHOR Wang, Weiguang and Chen, Jun-Xiang and Hou, Yanhao and Bartolo, Paulo and Chiang, Wei-Hung
Title Investigations of Graphene and Nitrogen-Doped Graphene Enhanced Polycaprolactone 3D Scaffolds for Bone Tissue Engineering [Abstract]
Year 2021
Journal/Proceedings Nanomaterials
Reftype
DOI/URL URL DOI
Abstract
Scaffolds play a key role in tissue engineering applications. In the case of bone tissue engineering, scaffolds are expected to provide both sufficient mechanical properties to withstand the physiological loads, and appropriate bioactivity to stimulate cell growth. In order to further enhance cell–cell signaling and cell–material interaction, electro-active scaffolds have been developed based on the use of electrically conductive biomaterials or blending electrically conductive fillers to non-conductive biomaterials. Graphene has been widely used as functioning filler for the fabrication of electro-active bone tissue engineering scaffolds, due to its high electrical conductivity and potential to enhance both mechanical and biological properties. Nitrogen-doped graphene, a unique form of graphene-derived nanomaterials, presents significantly higher electrical conductivity than pristine graphene, and better surface hydrophilicity while maintaining a similar mechanical property. This paper investigates the synthesis and use of high-performance nitrogen-doped graphene as a functional filler of poly(ɛ-caprolactone) (PCL) scaffolds enabling to develop the next generation of electro-active scaffolds. Compared to PCL scaffolds and PCL/graphene scaffolds, these novel scaffolds present improved in vitro biological performance.
AUTHOR Trucco, Diego and Sharma, Aarushi and Manferdini, Cristina and Gabusi, Elena and Petretta, Mauro and Desando, Giovanna and Ricotti, Leonardo and Chakraborty, Juhi and Ghosh, Sourabh and Lisignoli, Gina
Title Modeling and Fabrication of Silk Fibroin-Gelatin-Based Constructs Using Extrusion-Based Three-Dimensional Bioprinting [Abstract]
Year 2021
Journal/Proceedings ACS Biomater. Sci. Eng.
Reftype
DOI/URL DOI
Abstract
Robotic dispensing-based 3D bioprinting represents one of the most powerful technologies to develop hydrogel-based 3D constructs with enormous potential in the field of regenerative medicine. The optimization of hydrogel printing parameters, proper geometry and internal architecture of the constructs, and good cell viability during the bioprinting process are the essential requirements. In this paper, an analytical model based on the hydrogel rheological properties was developed to predict the extruded filament width in order to maximize the printed structure’s fidelity to the design. Viscosity data of two natural hydrogels were imputed to a power-law model to extrapolate the filament width. Further, the model data were validated by monitoring the obtained filament width as the output. Shear stress values occurring during the bioprinting process were also estimated. Human mesenchymal stromal cells (hMSCs) were encapsulated in the silk fibroin-gelatin (G)-based hydrogel, and a 3D bioprinting process was performed to produce cell-laden constructs. Live and dead assay allowed estimating the impact of needle shear stress on cell viability after the bioprinting process. Finally, we tested the potential of hMSCs to undergo chondrogenic differentiation by evaluating the cartilaginous extracellular matrix production through immunohistochemical analyses. Overall, the use of the proposed analytical model enables defining the optimal printing parameters to maximize the fabricated constructs’ fidelity to design parameters before the process execution, enabling to achieve more controlled and standardized products than classical trial-and-error approaches in the biofabrication of engineered constructs. Employing modeling systems exploiting the rheological properties of the hydrogels might be a valid tool in the future for guaranteeing high cell viability and for optimizing tissue engineering approaches in regenerative medicine applications. Robotic dispensing-based 3D bioprinting represents one of the most powerful technologies to develop hydrogel-based 3D constructs with enormous potential in the field of regenerative medicine. The optimization of hydrogel printing parameters, proper geometry and internal architecture of the constructs, and good cell viability during the bioprinting process are the essential requirements. In this paper, an analytical model based on the hydrogel rheological properties was developed to predict the extruded filament width in order to maximize the printed structure’s fidelity to the design. Viscosity data of two natural hydrogels were imputed to a power-law model to extrapolate the filament width. Further, the model data were validated by monitoring the obtained filament width as the output. Shear stress values occurring during the bioprinting process were also estimated. Human mesenchymal stromal cells (hMSCs) were encapsulated in the silk fibroin-gelatin (G)-based hydrogel, and a 3D bioprinting process was performed to produce cell-laden constructs. Live and dead assay allowed estimating the impact of needle shear stress on cell viability after the bioprinting process. Finally, we tested the potential of hMSCs to undergo chondrogenic differentiation by evaluating the cartilaginous extracellular matrix production through immunohistochemical analyses. Overall, the use of the proposed analytical model enables defining the optimal printing parameters to maximize the fabricated constructs’ fidelity to design parameters before the process execution, enabling to achieve more controlled and standardized products than classical trial-and-error approaches in the biofabrication of engineered constructs. Employing modeling systems exploiting the rheological properties of the hydrogels might be a valid tool in the future for guaranteeing high cell viability and for optimizing tissue engineering approaches in regenerative medicine applications.
AUTHOR Petretta, Mauro and Gambardella, Alessandro and Desando, Giovanna and Cavallo, Carola and Bartolotti, Isabella and Shelyakova, Tatiana and Goranov, Vitaly and Brucale, Marco and Dediu, Valentin Alek and Fini, Milena and Grigolo, Brunella
Title Multifunctional 3D-Printed Magnetic Polycaprolactone/Hydroxyapatite Scaffolds for Bone Tissue Engineering [Abstract]
Year 2021
Journal/Proceedings Polymers
Reftype
DOI/URL URL DOI
Abstract
Multifunctional and resistant 3D structures represent a great promise and a great challenge in bone tissue engineering. This study addresses this problem by employing polycaprolactone (PCL)-based scaffolds added with hydroxyapatite (HAp) and superparamagnetic iron oxide nanoparticles (SPION), able to drive on demand the necessary cells and other bioagents for a high healing efficiency. PCL-HAp-SPION scaffolds with different concentrations of the superparamagnetic component were developed through the 3D-printing technology and the specific topographical features were detected by Atomic Force and Magnetic Force Microscopy (AFM-MFM). AFM-MFM measurements confirmed a homogenous distribution of HAp and SPION throughout the surface. The magnetically assisted seeding of cells in the scaffold resulted most efficient for the 1% SPION concentration, providing good cell entrapment and adhesion rates. Mesenchymal Stromal Cells (MSCs) seeded onto PCL-HAp-1% SPION showed a good cell proliferation and intrinsic osteogenic potential, indicating no toxic effects of the employed scaffold materials. The performed characterizations and the collected set of data point on the inherent osteogenic potential of the newly developed PCL-HAp-1% SPION scaffolds, endorsing them towards next steps of in vitro and in vivo studies and validations.
AUTHOR King, William E. and Bowlin, Gary L.
Title Near-Field Electrospinning and Melt Electrowriting of Biomedical Polymers—Progress and Limitations [Abstract]
Year 2021
Journal/Proceedings Polymers
Reftype
DOI/URL URL DOI
Abstract
Near-field electrospinning (NFES) and melt electrowriting (MEW) are the process of extruding a fiber due to the force exerted by an electric field and collecting the fiber before bending instabilities occur. When paired with precise relative motion between the polymer source and the collector, a fiber can be directly written as dictated by preprogrammed geometry. As a result, this precise fiber control results in another dimension of scaffold tailorability for biomedical applications. In this review, biomedically relevant polymers that to date have manufactured fibers by NFES/MEW are explored and the present limitations in direct fiber writing of standardization in published setup details, fiber write throughput, and increased ease in the creation of complex scaffold geometries are discussed.
AUTHOR Salgado-Pizarro, Rebeca and Padilla, Jose Antonio and Xuriguera, Elena and Barreneche, Camila and Fernández, Ana Inés
Title Novel Shape-Stabilized Phase Change Material with Cascade Character: Synthesis, Performance and Shaping Evaluation [Abstract]
Year 2021
Journal/Proceedings Energies
Reftype
DOI/URL URL DOI
Abstract
Thermal Energy Storage (TES) materials, such as Phase Change Materials (PCMs) are proven to enhance the energy efficiency in many fields, such as automotive and building sectors, which correspond to the most energy intensive ones. Shape-stabilized PCM and cascade PCM are procedures to overcome the most important barriers when PCMs are applied since PCMs need to be encapsulated for their technical use: the leakage of the liquid phase, corrosion, low heat transfer and narrow temperature of application. In the present study, a novel shape stabilized PCM with cascade performance (cascade shape stabilized phase change material, CSS-PCM) is synthesized via dissolution, which allows up to 60 wt.% of a paraffin-PCM in the final composition. The novel CSS-PCM is based on a biopolymer, the polycaprolactone (PCL), a low melting temperature polyester as polymeric matrix and RT27 and Micronal DS 5040 acting as PCM. To evaluate the performance of the new TES materials developed, several techniques have been used: Differential Scanning Calorimetry (DSC), and Fourier-Transformed Infrared (FT-IR) spectroscopy were used to evaluate the thermophysical properties and the chemical properties of the different formulations. The CSS-PCM show an increment of storage capacity by increasing the PCM content, and the thermal reliability was also tested: some of the CSS-PCM formulations were stable for up to 500 thermal cycles. Finally, as a potential application of the new polymeric-based PCM 3D, a printing attempt was performed in order to analyze the viability of the formulations to be used as 3D printing material as a first proof of concept.
AUTHOR Yadav, Chandravati and Saini, Arun and Zhang, Wenbo and You, Xiangyu and Chauhan, Indu and Mohanty, Paritosh and Li, Xinping
Title Plant-based nanocellulose: A review of routine and recent preparation methods with current progress in its applications as rheology modifier and 3D bioprinting [Abstract]
Year 2021
Journal/Proceedings International Journal of Biological Macromolecules
Reftype
DOI/URL URL DOI
Abstract
“Nanocellulose” have captivated the topical sphere of sturdily escalating market for sustainable materials. The review focuses on the comprehensive understanding of the distinct surface chemistry and functionalities pertaining to the renovation of macro-cellulose at nanodimensional scale to provide an intuition of their processing-structure-function prospective. The abundant availability, cost effectiveness and diverse properties associated with plant-based resources have great economical perspective for developing sustainable cellulose nanomaterials. Hence, emphasis has been given on nanocellulose types obtained from plant-based sources. An overarching goal is to provide the recent advancement in the preparation routes of nanocellulose. Considering the excellent shear thinning/thixotropic/gel-like behavior, the review provids an assemblage of publications specifically dealing with its application as rheology modifier with emphasis on its use as bioink for 3D bioprinting for various biomedical applications. Altogether, this review has been oriented in a way to collocate a collective data starting from the historical perspective of cellulose discovery to modern cellulosic chemistry and its renovation as nanocellulose with recent technological hype for broad spanning applications.
AUTHOR Korpershoek, Jasmijn V. and Ruijter, Mylène de and Terhaard, Bastiaan F. and Hagmeijer, Michella H. and Saris, Daniël B.F. and Castilho, Miguel and Malda, Jos and Vonk, Lucienne A.
Title Potential of Melt Electrowritten Scaffolds Seeded with Meniscus Cells and Mesenchymal Stromal Cells [Abstract]
Year 2021
Journal/Proceedings International Journal of Molecular Sciences
Reftype
DOI/URL URL DOI
Abstract
Meniscus injury and meniscectomy are strongly related to osteoarthritis, thus there is a clinical need for meniscus replacement. The purpose of this study is to create a meniscus scaffold with micro-scale circumferential and radial fibres suitable for a one-stage cell-based treatment. Poly-caprolactone-based scaffolds with three different architectures were made using melt electrowriting (MEW) technology and their in vitro performance was compared with scaffolds made using fused-deposition modelling (FDM) and with the clinically used Collagen Meniscus Implants® (CMI®). The scaffolds were seeded with meniscus and mesenchymal stromal cells (MSCs) in fibrin gel and cultured for 28 d. A basal level of proteoglycan production was demonstrated in MEW scaffolds, the CMI®, and fibrin gel control, yet within the FDM scaffolds less proteoglycan production was observed. Compressive properties were assessed under uniaxial confined compression after 1 and 28 d of culture. The MEW scaffolds showed a higher Young’s modulus when compared to the CMI® scaffolds and a higher yield point compared to FDM scaffolds. This study demonstrates the feasibility of creating a wedge-shaped meniscus scaffold with MEW using medical-grade materials and seeding the scaffold with a clinically-feasible cell number and -type for potential translation as a one-stage treatment.
AUTHOR Lotz, Benedict and Bothe, Friederike and Deubel, Anne-Kathrin and Hesse, Eliane and Renz, Yvonne and Werner, Carsten and Schäfer, Simone and Böck, Thomas and Groll, Jürgen and von Rechenberg, Brigitte and Richter, Wiltrud and Hagmann, Sebastien
Title Preclinical Testing of New Hydrogel Materials for Cartilage Repair: Overcoming Fixation Issues in a Large Animal Model [Abstract]
Year 2021
Journal/Proceedings International Journal of Biomaterials
Reftype
DOI/URL DOI
Abstract
Reinforced hydrogels represent a promising strategy for tissue engineering of articular cartilage. They can recreate mechanical and biological characteristics of native articular cartilage and promote cartilage regeneration in combination with mesenchymal stromal cells. One of the limitations of in vivo models for testing the outcome of tissue engineering approaches is implant fixation. The high mechanical stress within the knee joint, as well as the concave and convex cartilage surfaces, makes fixation of reinforced hydrogel challenging. Methods. Different fixation methods for full-thickness chondral defects in minipigs such as fibrin glue, BioGlue®, covering, and direct suturing of nonenforced and enforced constructs were compared. Because of insufficient fixation in chondral defects, superficial osteochondral defects in the femoral trochlea, as well as the femoral condyle, were examined using press-fit fixation. Two different hydrogels (starPEG and PAGE) were compared by 3D-micro-CT (μCT) analysis as well as histological analysis. Results. Our results showed fixation of below 50% for all methods in chondral defects. A superficial osteochondral defect of 1 mm depth was necessary for long-term fixation of a polycaprolactone (PCL)-reinforced hydrogel construct. Press-fit fixation seems to be adapted for a reliable fixation of 95% without confounding effects of glue or suture material. Despite the good integration of our constructs, especially in the starPEG group, visible bone lysis was detected in micro-CT analysis. There was no significant difference between the two hydrogels (starPEG and PAGE) and empty control defects regarding regeneration tissue and cell integration. However, in the starPEG group, more cell-containing hydrogel fragments were found within the defect area. Conclusion. Press-fit fixation in a superficial osteochondral defect in the medial trochlear groove of adult minipigs is a promising fixation method for reinforced hydrogels. To avoid bone lysis, future approaches should focus on multilayered constructs recreating the zonal cartilage as well as the calcified cartilage and the subchondral bone plate.
AUTHOR Plou, Javier and Charconnet, Mathias and García, Isabel and Calvo, Javier and Liz-Marzán, Luis M.
Title Preventing Memory Effects in Surface-Enhanced Raman Scattering Substrates by Polymer Coating and Laser-Activated Deprotection [Abstract]
Year 2021
Journal/Proceedings ACS Nano
Reftype
DOI/URL DOI
Abstract
The development of continuous monitoring systems requires in situ sensors that are capable of screening multiple chemical species and providing real-time information. Such in situ measurements, in which the sample is analyzed at the point of interest, are hindered by underlying problems derived from the recording of successive measurements within complex environments. In this context, surface-enhanced Raman scattering (SERS) spectroscopy appears as a noninvasive technology with the ability of identifying low concentrations of chemical species as well as resolving dynamic processes under different conditions. To this aim, the technique requires the use of a plasmonic substrate, typically made of nanostructured metals such as gold or silver, to enhance the Raman signal of adsorbed molecules (the analyte). However, a common source of uncertainty in real-time SERS measurements originates from the irreversible adsorption of (analyte) molecules onto the plasmonic substrate, which may interfere in subsequent measurements. This so-called “SERS memory effect” leads to measurements that do not accurately reflect varying conditions of the sample over time. We introduce herein the design of plasmonic substrates involving a nonpermeable poly(lactic-co-glycolic acid) (PLGA) thin layer on top of the plasmonic nanostructure, toward controlling the adsorption of molecules at different times. The polymeric layer can be locally degraded by irradiation with the same laser used for SERS measurements (albeit at a higher fluence), thereby creating a micrometer-sized window on the plasmonic substrate available to molecules present in solution at a selected measurement time. Using SERS substrates coated with such thermolabile polymer layers, we demonstrate the possibility of performing over 10,000 consecutive measurements per substrate as well as accurate continuous monitoring of analytes in microfluidic channels and biological systems. The development of continuous monitoring systems requires in situ sensors that are capable of screening multiple chemical species and providing real-time information. Such in situ measurements, in which the sample is analyzed at the point of interest, are hindered by underlying problems derived from the recording of successive measurements within complex environments. In this context, surface-enhanced Raman scattering (SERS) spectroscopy appears as a noninvasive technology with the ability of identifying low concentrations of chemical species as well as resolving dynamic processes under different conditions. To this aim, the technique requires the use of a plasmonic substrate, typically made of nanostructured metals such as gold or silver, to enhance the Raman signal of adsorbed molecules (the analyte). However, a common source of uncertainty in real-time SERS measurements originates from the irreversible adsorption of (analyte) molecules onto the plasmonic substrate, which may interfere in subsequent measurements. This so-called “SERS memory effect” leads to measurements that do not accurately reflect varying conditions of the sample over time. We introduce herein the design of plasmonic substrates involving a nonpermeable poly(lactic-co-glycolic acid) (PLGA) thin layer on top of the plasmonic nanostructure, toward controlling the adsorption of molecules at different times. The polymeric layer can be locally degraded by irradiation with the same laser used for SERS measurements (albeit at a higher fluence), thereby creating a micrometer-sized window on the plasmonic substrate available to molecules present in solution at a selected measurement time. Using SERS substrates coated with such thermolabile polymer layers, we demonstrate the possibility of performing over 10,000 consecutive measurements per substrate as well as accurate continuous monitoring of analytes in microfluidic channels and biological systems.
AUTHOR Balaji Mahendiran and Shalini Muthusamy and Sowndarya Sampath and S.N. Jaisankar and Ketul C. Popat and R. Selvakumar and Gopal Shankar Krishnakumar
Title Recent trends in natural polysaccharide based bioinks for multiscale 3D printing in tissue regeneration: A review [Abstract]
Year 2021
Journal/Proceedings International Journal of Biological Macromolecules
Reftype
DOI/URL URL DOI
Abstract
Biofabrication by three-dimensional (3D) printing has been an attractive technology in harnessing the possibility to print anatomical shaped native tissues with controlled architecture and resolution. 3D printing offers the possibility to reproduce complex microarchitecture of native tissues by printing live cells in a layer by layer deposition to provide a biomimetic structural environment for tissue formation and host tissue integration. Plant based biomaterials derived from green and sustainable sources have represented to emulate native physicochemical and biological cues in order to direct specific cellular response and formation of new tissues through biomolecular recognition patterns. This comprehensive review aims to analyze and identify the most commonly used plant based bioinks for 3D printing applications. An overview on the role of different plant based biomaterial of terrestrial origin (Starch, Nanocellulose and Pectin) and marine origin (Ulvan, Alginate, Fucoidan, Agarose and Carrageenan) used for 3D printing applications are discussed elaborately. Furthermore, this review will also emphasis in the functional aspects of different 3D printers, appropriate printing material, merits and demerits of numerous plant based bioinks in developing 3D printed tissue-like constructs. Additionally, the underlying potential benefits, limitations and future perspectives of plant based bioinks for tissue engineering (TE) applications are also discussed.
AUTHOR Moghaddam, Abolfazl Salehi and Khonakdar, Hossein Ali and Arjmand, Mohammad and Jafari, Seyed Hassan and Bagher, Zohreh and Moghaddam, Zahra Salehi and Chimerad, Mohammadreza and Sisakht, Mahsa Mollapour and Shojaei, Shahrokh
Title Review of Bioprinting in Regenerative Medicine: Naturally Derived Bioinks and Stem Cells [Abstract]
Year 2021
Journal/Proceedings ACS Appl. Bio Mater.
Reftype
DOI/URL DOI
Abstract
Regenerative medicine offers the potential to repair or substitute defective tissues by constructing active tissues to address the scarcity and demands for transplantation. The method of forming 3D constructs made up of biomaterials, cells, and biomolecules is called bioprinting. Bioprinting of stem cells provides the ability to reliably recreate tissues, organs, and microenvironments to be used in regenerative medicine. 3D bioprinting is a technique that uses several biomaterials and cells to tailor a structure with clinically relevant geometries and sizes. This technique’s promise is demonstrated by 3D bioprinted tissues, including skin, bone, cartilage, and cardiovascular, corneal, hepatic, and adipose tissues. Several bioprinting methods have been combined with stem cells to effectively produce tissue models, including adult stem cells, embryonic stem cells (ESCs), induced pluripotent stem cells (iPSCs), and differentiation techniques. In this review, technological challenges of printed stem cells using prevalent naturally derived bioinks (e.g., carbohydrate polymers and protein-based polymers, peptides, and decellularized extracellular matrix), recent advancements, leading companies, and clinical trials in the field of 3D bioprinting are delineated. Regenerative medicine offers the potential to repair or substitute defective tissues by constructing active tissues to address the scarcity and demands for transplantation. The method of forming 3D constructs made up of biomaterials, cells, and biomolecules is called bioprinting. Bioprinting of stem cells provides the ability to reliably recreate tissues, organs, and microenvironments to be used in regenerative medicine. 3D bioprinting is a technique that uses several biomaterials and cells to tailor a structure with clinically relevant geometries and sizes. This technique’s promise is demonstrated by 3D bioprinted tissues, including skin, bone, cartilage, and cardiovascular, corneal, hepatic, and adipose tissues. Several bioprinting methods have been combined with stem cells to effectively produce tissue models, including adult stem cells, embryonic stem cells (ESCs), induced pluripotent stem cells (iPSCs), and differentiation techniques. In this review, technological challenges of printed stem cells using prevalent naturally derived bioinks (e.g., carbohydrate polymers and protein-based polymers, peptides, and decellularized extracellular matrix), recent advancements, leading companies, and clinical trials in the field of 3D bioprinting are delineated.
AUTHOR Anh Tong and Quang Long Pham and Paul Abatemarco and Austin Mathew and Dhruv Gupta and Siddharth Iyer and Roman Voronov
Title Review of Low-Cost 3D Bioprinters: State of the Market and Observed Future Trends [Abstract]
Year 2021
Journal/Proceedings SLAS TECHNOLOGY: Translating Life Sciences Innovation
Reftype
DOI/URL DOI
Abstract
Three-dimensional (3D) bioprinting has become mainstream for precise and repeatable high-throughput fabrication of complex cell cultures and tissue constructs in drug testing and regenerative medicine, food products, dental and medical implants, biosensors, and so forth. Due to this tremendous growth in demand, an overwhelming amount of hardware manufacturers have recently flooded the market with different types of low-cost bioprinter models—a price segment that is most affordable to typical-sized laboratories. These machines range in sophistication, type of the underlying printing technology, and possible add-ons/features, which makes the selection process rather daunting (especially for a nonexpert customer). Yet, the review articles available in the literature mostly focus on the technical aspects of the printer technologies under development, as opposed to explaining the differences in what is already on the market. In contrast, this paper provides a snapshot of the fast-evolving low-cost bioprinter niche, as well as reputation profiles (relevant to delivery time, part quality, adherence to specifications, warranty, maintenance, etc.) of the companies selling these machines. Specifically, models spanning three dominant technologies—microextrusion, droplet-based/inkjet, and light-based/crosslinking—are reviewed. Additionally, representative examples of high-end competitors (including up-and-coming microfluidics-based bioprinters) are discussed to highlight their major differences and advantages relative to the low-cost models. Finally, forecasts are made based on the trends observed during this survey, as to the anticipated trickling down of the high-end technologies to the low-cost printers. Overall, this paper provides insight for guiding buyers on a limited budget toward making informed purchasing decisions in this fast-paced market.
AUTHOR Li, Mei-Chun and Wu, Qinglin and Moon, Robert J. and Hubbe, Martin A. and Bortner, Michael J.
Title Rheological Aspects of Cellulose Nanomaterials: Governing Factors and Emerging Applications [Abstract]
Year 2021
Journal/Proceedings Advanced Materials
Reftype
DOI/URL DOI
Abstract
Abstract Cellulose nanomaterials (CNMs), mainly including nanofibrillated cellulose (NFC) and cellulose nanocrystals (CNCs), have attained enormous interest due to their sustainability, biodegradability, biocompatibility, nanoscale dimensions, large surface area, facile modification of surface chemistry, as well as unique optical, mechanical, and rheological performance. One of the most fascinating properties of CNMs is their aqueous suspension rheology, i.e., CNMs helping create viscous suspensions with the formation of percolation networks and chemical interactions (e.g., van der Waals forces, hydrogen bonding, electrostatic attraction/repulsion, and hydrophobic attraction). Under continuous shearing, CNMs in an aqueous suspension can align along the flow direction, producing shear-thinning behavior. At rest, CNM suspensions regain some of their initial structure immediately, allowing rapid recovery of rheological properties. These unique flow features enable CNMs to serve as rheological modifiers in a wide range of fluid-based applications. Herein, the dependence of the rheology of CNM suspensions on test protocols, CNM inherent properties, suspension environments, and postprocessing is systematically described. A critical overview of the recent progress on fluid applications of CNMs as rheology modifiers in some emerging industrial sectors is presented as well. Future perspectives in the field are outlined to guide further research and development in using CNMs as the next generation rheological modifiers.
AUTHOR Justino Netto, Joaquim Manoel and Idogava, Henrique Takashi and Frezzatto Santos, Luiz Eduardo and Silveira, Zilda de Castro and Romio, Pedro and Alves, Jorge Lino
Title Screw-assisted 3D printing with granulated materials: a systematic review [Abstract]
Year 2021
Journal/Proceedings The International Journal of Advanced Manufacturing Technology
Reftype Justino Netto2021
DOI/URL DOI
Abstract
This paper presents a systematic review on extrusion additive manufacturing (EAM), with focus on the technological development of screw-assisted systems that can be fed directly with granulated materials. Screw-assisted EAM has gained importance as an enabling technology to expand the range of 3D printing materials, reduce costs associated with feedstock fabrication, and increase the material deposition rate compared to traditional fused filament fabrication (FFF). Many experimental printheads and commercial systems that use some screw-processing mechanism can be found in the literature, but the design diversity and lack of standard terminology make it difficult to determine the most suitable solutions for a given material or application field. Besides, the few previous reviews have offered only a glimpse into the topic, without an in-depth analysis about the design of the extruders and associated capabilities. A systematic procedure was devised to identify the screw-assisted EAM systems that can print directly from granulated materials, resulting in 61 articles describing different pieces of equipment that were categorized as experimental printheads and commercial systems, for small- and large-scale applications. After describing their main characteristics, the most significant extruder modifications were discussed with reference to the materials processed and performance requirements. In the end, a general workflow for the development of 3D printers based on screw extrusion was proposed. This review intends to provide information about the state-of-the-art screw-assisted EAM and help the academy to identify further research opportunities in the field.
AUTHOR Iria Seoane-Viaño and Patricija Januskaite and Carmen Alvarez-Lorenzo and Abdul W. Basit and Alvaro Goyanes
Title Semi-solid extrusion 3D printing in drug delivery and biomedicine: Personalised solutions for healthcare challenges [Abstract]
Year 2021
Journal/Proceedings Journal of Controlled Release
Reftype
DOI/URL URL DOI
Abstract
Three-dimensional (3D) printing is an innovative additive manufacturing technology, capable of fabricating unique structures in a layer-by-layer manner. Semi-solid extrusion (SSE) is a subset of material extrusion 3D printing, and through the sequential deposition of layers of gel or paste creates objects of any desired size and shape. In comparison to other extrusion-based technologies, SSE 3D printing employs low printing temperatures which makes it suitable for drug delivery and biomedical applications, and the use of disposable syringes provides benefits in meeting critical quality requirements for pharmaceutical use. Besides pharmaceutical manufacturing, SSE 3D printing has attracted increasing attention in the field of bioelectronics, particularly in the manufacture of biosensors capable of measuring physiological parameters or as a means to trigger drug release from medical devices. This review begins by highlighting the major printing process parameters and material properties that influence the feasibility of transforming a 3D design into a 3D object, and follows with a discussion on the current SSE 3D printing developments and their applications in the fields of pharmaceutics, bioprinting and bioelectronics. Finally, the advantages and limitations of this technology are explored, before focusing on its potential clinical applications and suitability for preparing personalised medicines.
AUTHOR Bicudo, Edison and Faulkner, Alex and Li, Phoebe
Title Software, risks, and liabilities: ongoing and emergent issues in 3D bioprinting [Abstract]
Year 2021
Journal/Proceedings Journal of Risk Research
Reftype
DOI/URL DOI
Abstract
AbstractThe growing use of software in biomedicine has enlarged the capacities of researchers and clinicians. This, one might expect, would enhance the precision and safety of biomedicine. However, it has been recognized that software can bring about new risks to the field of medicine and medical devices, requiring at least some degree of caution from the different players responsible for technology governance and risk management. This phenomenon is focused on in this paper, from the viewpoint of 3D bioprinting.Bioprinting is the production of bioactive structures in a layer-by-layer deposition of cells, with the use of devices called bioprinters. The latter can only function by receiving instructions from software. This paper focuses on some software-supported techniques that are key for bioprinting. It shows that a growing range of software packages has been used in bioprinting, a trend that is greatly fostered by open source software.In this evolution, the clinical potentialities of bioprinting come closer to their realization. At the same time, however, uncertainties emerge, related to issues such as data protection, use of biological samples, and others. The growing use of open source software complexifies the scenario, because it leads to a multiplication of actors directly or indirectly involved in the technology’s development, making it difficult to trace liabilities and damages.As no national regulation has been produced to tackle such uncertainties, they have been (provisionally and precariously) addressed in the licenses of software packages. In the years to come, as clinical products eventually spring from bioprinting research, more robust governance schemes will have to emerge in which risks and liabilities are dealt with more carefully by different players. Moreover, regulations will have to address the practice of combining different software packages in the same bioprinting process, as well as the growing globalization of bioprinting research and commercial exploration.
AUTHOR Chawla, Shikha and Desando, Giovanna and Gabusi, Elena and Sharma, Aarushi and Trucco, Diego and Chakraborty, Juhi and Manferdini, Cristina and Petretta, Mauro and Lisignoli, Gina and Ghosh, Sourabh
Title The effect of silk-gelatin bioink and TGF-β3 on mesenchymal stromal cells in 3D bioprinted chondrogenic constructs: A proteomic study [Abstract]
Year 2021
Journal/Proceedings Journal of Materials Research
Reftype Chawla2021
DOI/URL DOI
Abstract
Major limitation of 3D bioprinting is the poor understanding of the role of bioink in modulating molecular signaling pathways. Phenotypically stable engineered articular cartilage was fabricated using silk fibroin-gelatin (SF-G) bioink and progenitor cells or mature articular chondrocytes. In the current study, role of SF-G bioink in modulating in vitro chondrogenic signaling pathways in human bone marrow-derived stromal cells (hMSCs) is elucidated. The interaction between SF-G bioink and hMSCs augmented several chondrogenic pathways, including Wnt, HIF-1, and Notch. We explored the debatable role of TGF-β signaling, by assessing the differential protein expression by hMSCs-laden bioprinted constructs in the presence and absence of TGF-β3. hMSCs-laden bioprinted constructs contained a large percentage of collagen type II and Filamin-B, typical to the native articular cartilage. Hypertrophy markers were not identified following TGF-β3 addition. This is first detailed proteomics analysis to identify articular cartilage-specific pathways in SF-G-based 3D bioprinted construct.
AUTHOR Park, Wonbin and Gao, Ge and Cho, Dong-Woo
Title Tissue-Specific Decellularized Extracellular Matrix Bioinks for Musculoskeletal Tissue Regeneration and Modeling Using 3D Bioprinting Technology [Abstract]
Year 2021
Journal/Proceedings International Journal of Molecular Sciences
Reftype
DOI/URL URL DOI
Abstract
The musculoskeletal system is a vital body system that protects internal organs, supports locomotion, and maintains homeostatic function. Unfortunately, musculoskeletal disorders are the leading cause of disability worldwide. Although implant surgeries using autografts, allografts, and xenografts have been conducted, several adverse effects, including donor site morbidity and immunoreaction, exist. To overcome these limitations, various biomedical engineering approaches have been proposed based on an understanding of the complexity of human musculoskeletal tissue. In this review, the leading edge of musculoskeletal tissue engineering using 3D bioprinting technology and musculoskeletal tissue-derived decellularized extracellular matrix bioink is described. In particular, studies on in vivo regeneration and in vitro modeling of musculoskeletal tissue have been focused on. Lastly, the current breakthroughs, limitations, and future perspectives are described.
AUTHOR Iria Seoane-Viaño and Sarah J. Trenfield and Abdul W. Basit and Alvaro Goyanes
Title Translating 3D printed pharmaceuticals: From hype to real-world clinical applications [Abstract]
Year 2021
Journal/Proceedings Advanced Drug Delivery Reviews
Reftype
DOI/URL URL DOI
Abstract
Three-dimensional (3D) printing is a revolutionary technology that is disrupting pharmaceutical development by enabling the production of personalised printlets (3D printed drug products) on demand. By creating small batches of dose flexible medicines, this versatile technology offers significant advantages for clinical practice and drug development, namely the ability to personalise medicines to individual patient needs, as well as expedite drug development timelines within preclinical studies through to first-in-human (FIH) and Phase I/II clinical trials. Despite the widely demonstrated benefits of 3D printing pharmaceuticals, the clinical potential of the technology is yet to be realised. In this timely review, we provide an overview of the latest cutting-edge investigations in 3D printing pharmaceuticals in the pre-clinical and clinical arena and offer a forward-looking approach towards strategies to further aid the translation of 3D printing into the clinic.
AUTHOR Göckler, Tobias and Haase, Sonja and Kempter, Xenia and Pfister, Rebecca and Maciel, Bruna R. and Grimm, Alisa and Molitor, Tamara and Willenbacher, Norbert and Schepers, Ute
Title Tuning Superfast Curing Thiol-Norbornene-Functionalized Gelatin Hydrogels for 3D Bioprinting [Abstract]
Year 2021
Journal/Proceedings Advanced Healthcare Materials
Reftype
DOI/URL DOI
Abstract
Abstract Photocurable gelatin-based hydrogels have established themselves as powerful bioinks in tissue engineering due to their excellent biocompatibility, biodegradability, light responsiveness, thermosensitivity and bioprinting properties. While gelatin methacryloyl (GelMA) has been the gold standard for many years, thiol-ene hydrogel systems based on norbornene-functionalized gelatin (GelNB) and a thiolated crosslinker have recently gained increasing importance. In this paper, a highly reproducible water-based synthesis of GelNB is presented, avoiding the use of dimethyl sulfoxide (DMSO) as organic solvent and covering a broad range of degrees of functionalization (DoF: 20% to 97%). Mixing with thiolated gelatin (GelS) results in the superfast curing photoclick hydrogel GelNB/GelS. Its superior properties over GelMA, such as substantially reduced amounts of photoinitiator (0.03% (w/v)), superfast curing (1–2 s), higher network homogeneity, post-polymerization functionalization ability, minimal cross-reactivity with cellular components, and improved biocompatibility of hydrogel precursors and degradation products lead to increased survival of primary cells in 3D bioprinting. Post-printing viability analysis revealed excellent survival rates of > 84% for GelNB/GelS bioinks of varying crosslinking density, while cell survival for GelMA bioinks is strongly dependent on the DoF. Hence, the semisynthetic and easily accessible GelNB/GelS hydrogel is a highly promising bioink for future medical applications and other light-based biofabrication techniques.
AUTHOR De Moor, Lise and Minne, Mendy and Tytgat, Liesbeth and Vercruysse, Chris and Dubruel, Peter and Van Vlierberghe, Sandra and Declercq, Heidi
Title Tuning the Phenotype of Cartilage Tissue Mimics by Varying Spheroid Maturation and Methacrylamide-Modified Gelatin Hydrogel Characteristics [Abstract]
Year 2021
Journal/Proceedings Macromolecular Bioscience
Reftype
DOI/URL DOI
Abstract
Abstract In hybrid bioprinting of cartilage tissue constructs, spheroids are used as cellular building blocks and combined with biomaterials for dispensing. However, biomaterial intrinsic cues can deeply affect cell fate and to date, the influence of hydrogel encapsulation on spheroid viability and phenotype has received limited attention. This study assesses this need and unravels 1) how the phenotype of spheroid-laden constructs can be tuned through adjusting the hydrogel physico–chemical properties and 2) if the spheroid maturation stage prior to encapsulation is a determining factor for the construct phenotype. Articular chondrocyte spheroids with a cartilage specific extracellular matrix (ECM) are generated and different maturation stages, early-, mid-, and late-stage (3, 7, and 14 days, respectively), are harvested and encapsulated in 10, 15, or 20 w/v% methacrylamide-modified gelatin (gelMA) for 14 days. The encapsulation of immature spheroids do not lead to a cartilage-like ECM production but when more mature mid- or late-stage spheroids are combined with a certain concentration of gelMA, a fibrocartilage-like as well as a hyaline cartilage-like phenotype can be induced. As a proof of concept, late-stage spheroids are bioprinted using a 10 w/v% gelMA–Irgacure 2959 solution with the aim to test the processing potential of the spheroid-laden bioink.
AUTHOR Lagatuz, M. and Vyas, R. J. and Predovic, M. and Lim, S. and Jacobs, N. and Martinho, M. and Valizadegan, H. and Kao, D. and Oza, N. and Theriot, C. A. and Zanello, S. B. and Taibbi, G. and Vizzeri, G. and Dupont, M. and Grant, M. B. and Lindner, D. J. and Reinecker, H.-C. and Pinhas, A. and Chui, T. Y. and Rosen, R. B. and Moldovan, N. and Vickerman, M. B. and Radhakrishnan, K. and Parsons-Wingerter, P.
Title Vascular Patterning as Integrative Readout of Complex Molecular and Physiological Signaling by VESsel GENeration Analysis [Abstract]
Year 2021
Journal/Proceedings J Vasc Res
Reftype
DOI/URL DOI
Abstract
The molecular signaling cascades that regulate angiogenesis and microvascular remodeling are fundamental to normal development, healthy physiology, and pathologies such as inflammation and cancer. Yet quantifying such complex, fractally branching vascular patterns remains difficult. We review application of NASA’s globally available, freely downloadable VESsel GENeration (VESGEN) Analysis software to numerous examples of 2D vascular trees, networks, and tree-network composites. Upon input of a binary vascular image, automated output includes informative vascular maps and quantification of parameters such as tortuosity, fractal dimension, vessel diameter, area, length, number, and branch point. Previous research has demonstrated that cytokines and therapeutics such as vascular endothelial growth factor, basic fibroblast growth factor (fibroblast growth factor-2), transforming growth factor-beta-1, and steroid triamcinolone acetonide specify unique “fingerprint” or “biomarker” vascular patterns that integrate dominant signaling with physiological response. In vivo experimental examples described here include vascular response to keratinocyte growth factor, a novel vessel tortuosity factor; angiogenic inhibition in humanized tumor xenografts by the anti-angiogenesis drug leronlimab; intestinal vascular inflammation with probiotic protection by Saccharomyces boulardii, and a workflow programming of vascular architecture for 3D bioprinting of regenerative tissues from 2D images. Microvascular remodeling in the human retina is described for astronaut risks in microgravity, vessel tortuosity in diabetic retinopathy, and venous occlusive disease.
AUTHOR Lagatuz, M. and Vyas, R. J. and Predovic, M. and Lim, S. and Jacobs, N. and Martinho, M. and Valizadegan, H. and Kao, D. and Oza, N. and Theriot, C. A. and Zanello, S. B. and Taibbi, G. and Vizzeri, G. and Dupont, M. and Grant, M. B. and Lindner, D. J. and Reinecker, H.-C. and Pinhas, A. and Chui, T. Y. and Rosen, R. B. and Moldovan, N. and Vickerman, M. B. and Radhakrishnan, K. and Parsons-Wingerter, P.
Title Vascular Patterning as Integrative Readout of Complex Molecular and Physiological Signaling by VESsel GENeration Analysis [Abstract]
Year 2021
Journal/Proceedings J Vasc Res
Reftype
DOI/URL DOI
Abstract
The molecular signaling cascades that regulate angiogenesis and microvascular remodeling are fundamental to normal development, healthy physiology, and pathologies such as inflammation and cancer. Yet quantifying such complex, fractally branching vascular patterns remains difficult. We review application of NASA’s globally available, freely downloadable VESsel GENeration (VESGEN) Analysis software to numerous examples of 2D vascular trees, networks, and tree-network composites. Upon input of a binary vascular image, automated output includes informative vascular maps and quantification of parameters such as tortuosity, fractal dimension, vessel diameter, area, length, number, and branch point. Previous research has demonstrated that cytokines and therapeutics such as vascular endothelial growth factor, basic fibroblast growth factor (fibroblast growth factor-2), transforming growth factor-beta-1, and steroid triamcinolone acetonide specify unique “fingerprint” or “biomarker” vascular patterns that integrate dominant signaling with physiological response. In vivo experimental examples described here include vascular response to keratinocyte growth factor, a novel vessel tortuosity factor; angiogenic inhibition in humanized tumor xenografts by the anti-angiogenesis drug leronlimab; intestinal vascular inflammation with probiotic protection by Saccharomyces boulardii, and a workflow programming of vascular architecture for 3D bioprinting of regenerative tissues from 2D images. Microvascular remodeling in the human retina is described for astronaut risks in microgravity, vessel tortuosity in diabetic retinopathy, and venous occlusive disease.
AUTHOR Lagatuz, M. and Vyas, R. J. and Predovic, M. and Lim, S. and Jacobs, N. and Martinho, M. and Valizadegan, H. and Kao, D. and Oza, N. and Theriot, C. A. and Zanello, S. B. and Taibbi, G. and Vizzeri, G. and Dupont, M. and Grant, M. B. and Lindner, D. J. and Reinecker, H.-C. and Pinhas, A. and Chui, T. Y. and Rosen, R. B. and Moldovan, N. and Vickerman, M. B. and Radhakrishnan, K. and Parsons-Wingerter, P.
Title Vascular Patterning as Integrative Readout of Complex Molecular and Physiological Signaling by VESsel GENeration Analysis [Abstract]
Year 2021
Journal/Proceedings J Vasc Res
Reftype
DOI/URL DOI
Abstract
The molecular signaling cascades that regulate angiogenesis and microvascular remodeling are fundamental to normal development, healthy physiology, and pathologies such as inflammation and cancer. Yet quantifying such complex, fractally branching vascular patterns remains difficult. We review application of NASA’s globally available, freely downloadable VESsel GENeration (VESGEN) Analysis software to numerous examples of 2D vascular trees, networks, and tree-network composites. Upon input of a binary vascular image, automated output includes informative vascular maps and quantification of parameters such as tortuosity, fractal dimension, vessel diameter, area, length, number, and branch point. Previous research has demonstrated that cytokines and therapeutics such as vascular endothelial growth factor, basic fibroblast growth factor (fibroblast growth factor-2), transforming growth factor-beta-1, and steroid triamcinolone acetonide specify unique “fingerprint” or “biomarker” vascular patterns that integrate dominant signaling with physiological response. In vivo experimental examples described here include vascular response to keratinocyte growth factor, a novel vessel tortuosity factor; angiogenic inhibition in humanized tumor xenografts by the anti-angiogenesis drug leronlimab; intestinal vascular inflammation with probiotic protection by Saccharomyces boulardii, and a workflow programming of vascular architecture for 3D bioprinting of regenerative tissues from 2D images. Microvascular remodeling in the human retina is described for astronaut risks in microgravity, vessel tortuosity in diabetic retinopathy, and venous occlusive disease.
AUTHOR Devillard, Chloé D. and Marquette, Christophe A.
Title Vascular Tissue Engineering: Challenges and Requirements for an Ideal Large Scale Blood Vessel [Abstract]
Year 2021
Journal/Proceedings Frontiers in Bioengineering and Biotechnology
Reftype
DOI/URL DOI
Abstract
Since the emergence of regenerative medicine and tissue engineering more than half a century ago, one obstacle has persisted: the in vitro creation of large-scale vascular tissue (>1 cm3) to meet the clinical needs of viable tissue grafts but also for biological research applications. Considerable advancements in biofabrication have been made since Weinberg and Bell, in 1986, created the first blood vessel from collagen, endothelial cells, smooth muscle cells and fibroblasts. The synergistic combination of advances in fabrication methods, availability of cell source, biomaterials formulation and vascular tissue development, promises new strategies for the creation of autologous blood vessels, recapitulating biological functions, structural functions, but also the mechanical functions of a native blood vessel. In this review, the main technological advancements in bio-fabrication are discussed with a particular highlights on 3D bioprinting technologies. The choice of the main biomaterials and cell sources, the use of dynamic maturation systems such as bioreactors and the associated clinical trials will be detailed. The remaining challenges in this complex engineering field will finally be discussed.
AUTHOR Jhinuk Rahman and Julian Quodbach
Title Versatility on demand – The case for semi-solid micro-extrusion in pharmaceutics [Abstract]
Year 2021
Journal/Proceedings Advanced Drug Delivery Reviews
Reftype
DOI/URL URL DOI
Abstract
Since additive manufacturing of pharmaceuticals has been introduced as viable method to produce individualized drug delivery systems with complex geometries and release profiles, semi-solid micro-extrusion has shown to be uniquely beneficial. Easy incorporation of actives, room-temperature processability and avoidance of cross-contamination by using disposables are some of the advantages that led many researchers to focus their work on this technology in the last few years. First acceptability and in-vivo studies have brought it closer towards implementation in decentralized settings. This review covers recently established process models in light of viscosity and printability discussions to help develop high quality printed medicines. Quality defining formulation and process parameters to characterize the various developed dosage forms are presented before critically discussing the role of semi-solid micro-extrusion in the future of personalized drug delivery systems. Remaining challenges regarding regulatory guidance and quality assurance that pose the last hurdle for large scale and commercial manufacturing are addressed.
AUTHOR Hamid, Omar A. and Eltaher, Hoda M. and Sottile, Virginie and Yang, Jing
Title 3D bioprinting of a stem cell-laden, multi-material tubular composite: An approach for spinal cord repair [Abstract]
Year 2020
Journal/Proceedings Materials Science and Engineering: C
Reftype
DOI/URL URL DOI
Abstract
Development of a biomimetic tubular scaffold capable of recreating developmental neurogenesis using pluripotent stem cells offers a novel strategy for the repair of spinal cord tissues. Recent advances in 3D printing technology have facilitated biofabrication of complex biomimetic environments by precisely controlling the 3D arrangement of various acellular and cellular components (biomaterials, cells and growth factors). Here, we present a 3D printing method to fabricate a complex, patterned and embryoid body (EB)-laden tubular scaffold composed of polycaprolactone (PCL) and hydrogel (alginate or gelatine methacrylate (GelMA)). Our results revealed 3D printing of a strong, macro-porous PCL/hydrogel tubular scaffold with a high capacity to control the porosity of the PCL scaffold, wherein the maximum porosity in the PCL wall was 15%. The method was equally employed to create spatiotemporal protein concentration within the scaffold, demonstrating its ability to generate linear and opposite gradients of model molecules (fluorescein isothiocyanate-conjugated bovine serum albumin (FITC-BSA) and rhodamine). 3D bioprinting of EBs-laden GelMA was introduced as a novel 3D printing strategy to incorporate EBs in a hydrogel matrix. Cell viability and proliferation were measured post-printing. Following the bioprinting of EBs-laden 5% GelMA hydrogel, neural differentiation of EBs was induced using 1 μM retinoic acid (RA). The differentiated EBs contained βIII-tubulin positive neurons displaying axonal extensions and cells migration. Finally, 3D bioprinting of EBs-laden PCL/GelMA tubular scaffold successfully supported EBs neural differentiation and patterning in response to co-printing with 1 μM RA. 3D printing of a complex heterogeneous tubular scaffold that can encapsulate EBs, spatially controlled protein concentration and promote neuronal patterning will help in developing more biomimetic scaffolds capable of replicating the neural patterning which occurs during neural tube development.
AUTHOR Chen, Shengyang and Jang, Tae-Sik and Pan, Houwen Matthew and Jung, Hyun-Do and Sia, Ming Wei and Xie, Shuying and Hang, Yao and Chong, Seow and Wong, Dongan
Title 3D Freeform Printing of Nanocomposite Hydrogels through in situ Precipitation in Reactive Viscous Fluid
Year 2020
Journal/Proceedings International Journal of Bioprinting
Reftype
DOI/URL DOI
AUTHOR Lin, Che-Wei and Su, Yu-Feng and Lee, Chih-Yun and Kang, Lin and Wang, Yan-Hsiung and Lin, Sung-Yen and Wang, Chih-Kuang
Title 3D printed bioceramics fabricated using negative thermoresponsive hydrogels and silicone oil sealing to promote bone formation in calvarial defects [Abstract]
Year 2020
Journal/Proceedings Ceramics International
Reftype
DOI/URL URL DOI
Abstract
The purpose of the present work was to investigate the potential for application and the effectiveness of osteoconductive scaffolds with bicontinuous phases of 3D printed bioceramics (3DP-BCs) based on reverse negative thermoresponsive hydrogels (poly[(N-isopropylacrylamide)-co-(methacrylic acid)]; p(NiPAAm-MAA)). 3DP-BCs have bioceramic objects and microchannel pores when created using robotic deposition additive manufacturing. We evaluated the benefits of silicone oil sealing on the 3DP-BC green body during the sintering process in terms of densification and structural stability. The shrinkage, density, porosity, element composition, phase structure and microstructural analyses and compression strength measurements of sintered 3DP-BC objects are presented and discussed in this study. In addition, the results of cell viability assays and bone healing analyses of the calvarial bone defects in a rabbit model were used to evaluate 3DP-BC performance. The main results indicated that these 3DP-BC scaffolds have optimal continuous pores and adequate compressive strength, which can enable the protection of calvarial defects and provide an environment for cell growth. Therefore, 3DP-BC scaffolds have better new bone regeneration efficiency in rabbit calvarial bone defect models than empty scaffolds and mold-forming bioceramic scaffolds (MF-BCs).
AUTHOR Rupp, Harald and Binder, Wolfgang H.
Title 3D Printing of Core–Shell Capsule Composites for Post-Reactive and Damage Sensing Applications [Abstract]
Year 2020
Journal/Proceedings Advanced Materials Technologies
Reftype
DOI/URL DOI
Abstract
Abstract 3D printing of multicomponent materials as an advantageous method over traditional mold casting methods is demonstrated, developing small core–shell capsule composites fabricated by a two-step 3D printing process. Using a two-print-head system (fused deposition modeling extruder and a liquid inkjet print head), micro-sized capsules are manufactured in sizes ranging from 100 to 800 µm. The thermoplastic polymer poly(ε-caprolactone) (PCL) is chosen as matrix/shell material due to its optimal interaction with the embedded hydrophobic liquids. First, the core–shell capsules are printed with model liquids and pure PCL to optimize the printing parameters and to ensure fully enclosed capsules inside the polymer. As a proof of concept, novel “click” reaction systems, used in self-healing and stress-detection applications, are manufactured in which PCL composites with nano- and micro-fillers are combined with reactive, encapsulated liquids. The so generated 3D printed core–shell capsule composite can be used for post-printing reactions and damage sensing when combined with a fluorogenic dye.
AUTHOR Critchley, Susan and Sheehy, Eamon J. and Cunniffe, Gráinne and Diaz-Payno, Pedro and Carroll, Simon F. and Jeon, Oju and Alsberg, Eben and Brama, Pieter A. J. and Kelly, Daniel J.
Title 3D printing of fibre-reinforced cartilaginous templates for the regeneration of osteochondral defects [Abstract]
Year 2020
Journal/Proceedings Acta Biomaterialia
Reftype
DOI/URL URL DOI
Abstract
Successful osteochondral defect repair requires regenerating the subchondral bone whilst simultaneously promoting the development of an overlying layer of articular cartilage that is resistant to vascularization and endochondral ossification. During skeletal development articular cartilage also functions as a surface growth plate, which postnatally is replaced by a more spatially complex bone-cartilage interface. Motivated by this developmental process, the hypothesis of this study is that bi-phasic, fibre-reinforced cartilaginous templates can regenerate both the articular cartilage and subchondral bone within osteochondral defects created in caprine joints. To engineer mechanically competent implants, we first compared a range of 3D printed fibre networks (PCL, PLA and PLGA) for their capacity to mechanically reinforce alginate hydrogels whilst simultaneously supporting mesenchymal stem cell (MSC) chondrogenesis in vitro. These mechanically reinforced, MSC-laden alginate hydrogels were then used to engineer the endochondral bone forming phase of bi-phasic osteochondral constructs, with the overlying chondral phase consisting of cartilage tissue engineered using a co-culture of infrapatellar fat pad derived stem/stromal cells (FPSCs) and chondrocytes. Following chondrogenic priming and subcutaneous implantation in nude mice, these bi-phasic cartilaginous constructs were found to support the development of vascularised endochondral bone overlaid by phenotypically stable cartilage. These fibre-reinforced, bi-phasic cartilaginous templates were then evaluated in clinically relevant, large animal (caprine) model of osteochondral defect repair. Although the quality of repair was variable from animal-to-animal, in general more hyaline-like cartilage repair was observed after 6 months in animals treated with bi-phasic constructs compared to animals treated with commercial control scaffolds. This variability in the quality of repair points to the need for further improvements in the design of 3D bioprinted implants for joint regeneration. Statement of Significance Successful osteochondral defect repair requires regenerating the subchondral bone whilst simultaneously promoting the development of an overlying layer of articular cartilage. In this study, we hypothesised that bi-phasic, fibre-reinforced cartilaginous templates could be leveraged to regenerate both the articular cartilage and subchondral bone within osteochondral defects. To this end we used 3D printed fibre networks to mechanically reinforce engineered transient cartilage, which also contained an overlying layer of phenotypically stable cartilage engineered using a co-culture of chondrocytes and stem cells. When chondrogenically primed and implanted into caprine osteochondral defects, these fibre-reinforced bi-phasic cartilaginous grafts were shown to spatially direct tissue development during joint repair. Such developmentally inspired tissue engineering strategies, enabled by advances in biofabrication and 3D printing, could form the basis of new classes of regenerative implants in orthopaedic medicine.
AUTHOR Wibowo, Arie and Vyas, Cian and Cooper, Glen and Qulub, Fitriyatul and Suratman, Rochim and Mahyuddin, Andi Isra and Dirgantara, Tatacipta and Bartolo, Paulo
Title 3D Printing of Polycaprolactone-Polyaniline Electroactive Scaffolds for Bone Tissue Engineering. [Abstract]
Year 2020
Journal/Proceedings Materials
Reftype
DOI/URL DOI
Abstract
Electrostimulation and electroactive scaffolds can positively influence and guide cellular behaviour and thus has been garnering interest as a key tissue engineering strategy. The development of conducting polymers such as polyaniline enables the fabrication of conductive polymeric composite scaffolds. In this study, we report on the initial development of a polycaprolactone scaffold incorporating different weight loadings of a polyaniline microparticle filler. The scaffolds are fabricated using screw-assisted extrusion-based 3D printing and are characterised for their morphological, mechanical, conductivity, and preliminary biological properties. The conductivity of the polycaprolactone scaffolds increases with the inclusion of polyaniline. The in vitro cytocompatibility of the scaffolds was assessed using human adipose-derived stem cells to determine cell viability and proliferation up to 21 days. A cytotoxicity threshold was reached at 1% wt. polyaniline loading. Scaffolds with 0.1% wt. polyaniline showed suitable compressive strength (6.45 ± 0.16 MPa) and conductivity (2.46 ± 0.65 × 10(-4) S/cm) for bone tissue engineering applications and demonstrated the highest cell viability at day 1 (88%) with cytocompatibility for up to 21 days in cell culture.
AUTHOR García-Astrain, Clara and Lenzi, Elisa and Jimenez de Aberasturi, Dorleta and Henriksen-Lacey, Malou and Binelli, Marco R. and Liz-Marzán, Luis M.
Title 3D-Printed Biocompatible Scaffolds with Built-In Nanoplasmonic Sensors [Abstract]
Year 2020
Journal/Proceedings Advanced Functional Materials
Reftype
DOI/URL DOI
Abstract
Abstract 3D printing strategies have acquired great relevance toward the design of 3D scaffolds with precise macroporous structures, for supported mammalian cell growth. Despite advances in 3D model designs, there is still a shortage of detection tools to precisely monitor in situ cell behavior in 3D, thereby allowing a better understanding of the progression of diseases or to test the efficacy of drugs in a more realistic microenvironment. Even if the number of available inks has exponentially increased, they do not necessarily offer the required functionalities to be used as internal sensors. Herein the potential of surface-enhanced Raman scattering (SERS) spectroscopy for the detection of biorelevant analytes within a plasmonic hydrogel-based, 3D-printed scaffold is demonstrated. Such SERS-active scaffolds allow for the 3D detection of model molecules, such as 4-mercaptobenzoic acid. Flexibility in the choice of plasmonic nanoparticles is demonstrated through the use of gold nanoparticles with different morphologies, gold nanorods showing the best balance between SERS enhancement and scaffold transparency. Detection of the biomarker adenosine is also demonstrated as a proof-of-concept toward the use of these plasmonic scaffolds for SERS sensing of cell-secreted molecules over extended periods of time.
AUTHOR Zamani, Yasaman and Amoabediny, Ghassem and Mohammadi, Javad and Seddiqi, Hadi and Helder, Marco N. and Zandieh-Doulabi, Behrouz and Klein-Nulend, Jenneke and Koolstra, Jan Harm
Title 3D-printed poly(Ɛ-caprolactone) scaffold with gradient mechanical properties according to force distribution in the mandible for mandibular bone tissue engineering [Abstract]
Year 2020
Journal/Proceedings Journal of the Mechanical Behavior of Biomedical Materials
Reftype
DOI/URL URL DOI
Abstract
In bone tissue engineering, prediction of forces induced to the native bone during normal functioning is important in the design, fabrication, and integration of a scaffold with the host. The aim of this study was to customize the mechanical properties of a layer-by-layer 3D-printed poly(ϵ-caprolactone) (PCL) scaffold estimated by finite element (FE) modeling in order to match the requirements of the defect, to prevent mechanical failure, and ensure optimal integration with the surrounding tissue. Forces and torques induced on the mandibular symphysis during jaw opening and closing were predicted by FE modeling. Based on the predicted forces, homogeneous-structured PCL scaffolds with 3 different void sizes (0.3, 0.6, and 0.9 mm) were designed and 3D-printed using an extrusion based 3D-bioprinter. In addition, 2 gradient-structured scaffolds were designed and 3D-printed. The first gradient scaffold contained 2 regions (0.3 mm and 0.6 mm void size in the upper and lower half, respectively), whereas the second gradient scaffold contained 3 regions (void sizes of 0.3, 0.6, and 0.9 mm in the upper, middle and lower third, respectively). Scaffolds were tested for their compressive and tensile strength in the upper and lower halves. The actual void size of the homogeneous scaffolds with designed void size of 0.3, 0.6, and 0.9 mm was 0.20, 0.59, and 0.95 mm, respectively. FE modeling showed that during opening and closing of the jaw, the highest force induced on the symphysis was a compressive force in the transverse direction. The compressive force was induced throughout the symphyseal line and reduced from top (362.5 N, compressive force) to bottom (107.5 N, tensile force) of the symphysis. Compressive and tensile strength of homogeneous scaffolds decreased by 1.4-fold to 3-fold with increasing scaffold void size. Both gradient scaffolds had higher compressive strength in the upper half (2 region-gradient scaffold: 4.9 MPa; 3 region-gradient scaffold: 4.1 MPa) compared with the lower half (2 region-gradient scaffold: 2.5 MPa; 3 region-gradient scaffold: 2.7 MPa) of the scaffold. 3D-printed PCL scaffolds had higher compressive strength in the scaffold layer-by-layer building direction compared with the side direction, and a very low tensile strength in the scaffold layer-by-layer building direction. Fluid shear stress and fluid pressure distribution in the gradient scaffolds were more homogeneous than in the 0.3 mm void size scaffold and similar to the 0.6 mm and 0.9 mm void size scaffolds. In conclusion, these data show that the mechanical properties of 3D-printed PCL scaffolds can be tailored based on the predicted forces on the mandibular symphysis. These 3D-printed PCL scaffolds had different mechanical properties in scaffold building direction compared with the side direction, which should be taken into account when placing the scaffold in the defect site. Our findings might have implications for improved performance and integration of scaffolds with native tissue.
AUTHOR Mancini, I. A. D. and Schmidt, S. and Brommer, H. and Pouran, B. and Schäfer, S. and Tessmar, J. and Mensinga, A. and van Rijen, M. H. P. and Groll, J. and Blunk, T. and Levato, R. and Malda, J. and van Weeren, P. R.
Title A composite hydrogel-3D printed thermoplast osteochondral anchor as example for a zonal approach to cartilage repair: in vivo performance in a long-term equine model [Abstract]
Year 2020
Journal/Proceedings Biofabrication
Reftype
DOI/URL DOI
Abstract
Recent research has been focusing on the generation of living personalized osteochondral constructs for joint repair. Native articular cartilage has a zonal structure, which is not reflected in current constructs and which may be a cause of the frequent failure of these repair attempts. Therefore, we investigated the performance of a composite implant that further reflects the zonal distribution of cellular component both in vitro and in vivo in a long-term equine model. Constructs constituted of a 3D-printed poly(ϵ-caprolactone) (PCL) bone anchor from which reinforcing fibers protruded into the chondral part of the construct over which two layers of a thiol-ene cross-linkable hyaluronic acid/poly(glycidol) hybrid hydrogel (HA-SH/P(AGE-co-G)) were fabricated. The top layer contained Articular Cartilage Progenitor Cells (ACPCs) derived from the superficial layer of native cartilage tissue, the bottom layer contained mesenchymal stromal cells (MSCs). The chondral part of control constructs were homogeneously filled with MSCs. After six months in vivo, microtomography revealed significant bone growth into the anchor. Histologically, there was only limited production of cartilage-like tissue (despite persistency of hydrogel) both in zonal and non-zonal constructs. There were no differences in histological scoring; however, the repair tissue was significantly stiffer in defects repaired with zonal constructs. The sub-optimal quality of the repair tissue may be related to several factors, including early loss of implanted cells, or inappropriate degradation rate of the hydrogel. Nonetheless, this approach may be promising and research into further tailoring of biomaterials and of construct characteristics seems warranted.
AUTHOR Jung, Harry and Lee, Ji Seung and Lee, Jun Ho and Park, Ki Joon and Lee, Jae Jun and Park, Hae Sang
Title A Feasibility Study for 3D-printed Poly(methyl methacrylate)-resin Tracheostomy Tube Using a Hamster Cheek Pouch Model
Year 2020
Journal/Proceedings In Vivo
Reftype
DOI/URL URL
AUTHOR Wang, Zehao and Hui, Aiping and Zhao, Hongbin and Ye, Xiaohan and Zhang, Chao and Wang, Aiqin and Zhang, Changqing
Title A Novel 3D-bioprinted Porous Nano Attapulgite Scaffolds with Good Performance for Bone Regeneration [Abstract]
Year 2020
Journal/Proceedings International Journal of Nanomedicine
Reftype
DOI/URL URL
Abstract
BACKGROUND: Natural clay nanomaterials are an emerging class of biomaterial with great potential for tissue engineering and regenerative medicine applications, most notably for osteogenesis. MATERIALS AND METHODS: Herein, for the first time, novel tissue engineering scaffolds were prepared by 3D bioprinter using nontoxic and bioactive natural attapulgite (ATP) nanorods as starting materials, with polyvinyl alcohol as binder, and then sintered to obtain final scaffolds. The microscopic morphology and structure of ATP particles and scaffolds were observed by transmission electron microscope and scanning electron microscope. In vitro biocompatibility and osteogenesis with osteogenic precursor cell (hBMSCs) were assayed using MTT method, Live/Dead cell staining, alizarin red staining and RT-PCR. In vivo bone regeneration was evaluated with micro-CT and histology analysis in rat cranium defect model. RESULTS: We successfully printed a novel porous nano-ATP scaffold designed with inner channels with a dimension of 500 µm and wall structures with a thickness of 330 µm. The porosity of current 3D-printed scaffolds ranges from 75% to 82% and the longitudinal compressive strength was up to 4.32±0.52 MPa. We found firstly that nano-ATP scaffolds with excellent biocompatibility for hBMSCscould upregulate the expression of osteogenesis-related genes bmp2 and runx2 and calcium deposits in vitro. Interestingly, micro-CT and histology analysis revealed abundant newly formed bone was observed along the defect margin, even above and within the 3D bioprinted porous ATP scaffolds in a rat cranial defect model. Furthermore, histology analysis demonstrated that bone was formed directly following a process similar to membranous ossification without any intermediate cartilage formation and that many newly formed blood vessels are within the pores of 3D-printed scaffolds at four and eight weeks. CONCLUSION: These results suggest that the 3D-printed porous nano-ATP scaffolds are promising candidates for bone tissue engineering by osteogenesis and angiogenesis.
AUTHOR Moxon, Sam and Ferreira, Miguel and Santos, Patricia and Popa, Bogdan and Gloria, Antonio and Katsarava, Ramaz and Tugushi, David and Serra, Armenio and Hooper, Nigel and Kimber, Susan and Fonseca, Ana and Domingos, Marco
Title A Preliminary Evaluation of the Pro-Chondrogenic Potential of 3D-Bioprinted Poly(ester Urea) Scaffolds
Year 2020
Journal/Proceedings Polymers
Reftype
DOI/URL DOI
AUTHOR Li, Zuxi and Zhang, Xiao and Yuan, Tao and Zhang, Yi and Luo, Chunyang and Zhang, Jiyong and Liu, Yang and Fan, Weimin
Title Addition of Platelet-Rich Plasma to Silk Fibroin Hydrogel Bioprinting for Cartilage Regeneration [Abstract]
Year 2020
Journal/Proceedings Tissue Engineering Part A
Reftype
DOI/URL DOI
Abstract
The recent advent of 3D bioprinting of biopolymers provides a novel method for fabrication of tissue-engineered scaffolds and also offers a potentially promising avenue in cartilage regeneration. Silk fibroin (SF) is one of the most popular biopolymers used for 3D bioprinting, but further application of SF is hindered by its limited biological activities. Incorporation of growth factors (GFs) has been identified as a solution to improve biological function. Platelet-rich plasma (PRP) is an autologous resource of GFs, which has been widely used in clinic. In this study, we have developed SF-based bioinks incorporated with different concentrations of PRP (12.5%, 25%, and 50%; vol/vol). Release kinetic studies show that SF-PRP bioinks could achieve controlled release of GFs. Subsequently, SF-PRP bioinks were successfully fabricated into scaffolds by bioprinting. Our results revealed that SF-PRP scaffolds possessed proper internal pore structure, good biomechanical properties, and a suitable degradation rate for cartilage regeneration. Live/dead staining showed that 3D, printed SF-PRP scaffolds were biocompatible. Moreover, in vitro studies revealed that tissue-engineered cartilage from the SF-PRP group exhibited improved qualities compared with the pure SF controls, according to histological and immunohistochemical findings. Biochemical evaluations confirmed that SF-PRP (50% PRP, v/v) scaffolds allowed the largest increases in collagen and glycosaminoglycan concentrations, when compared with the pure SF group. These findings suggest that 3D, printed SF-PRP scaffolds could be potential candidates for cartilage tissue engineering.
AUTHOR Cui, Xiaolin and Li, Jun and Hartanto, Yusak and Durham, Mitchell and Tang, Junnan and Zhang, Hu and Hooper, Gary and Lim, Khoon and Woodfield, Tim
Title Advances in Extrusion 3D Bioprinting: A Focus on Multicomponent Hydrogel-Based Bioinks [Abstract]
Year 2020
Journal/Proceedings Advanced Healthcare Materials
Reftype
DOI/URL DOI
Abstract
Abstract 3D bioprinting involves the combination of 3D printing technologies with cells, growth factors and biomaterials, and has been considered as one of the most advanced tools for tissue engineering and regenerative medicine (TERM). However, despite multiple breakthroughs, it is evident that numerous challenges need to be overcome before 3D bioprinting will eventually become a clinical solution for a variety of TERM applications. To produce a 3D structure that is biologically functional, cell-laden bioinks must be optimized to meet certain key characteristics including rheological properties, physico-mechanical properties, and biofunctionality; a difficult task for a single component bioink especially for extrusion based bioprinting. As such, more recent research has been centred on multicomponent bioinks consisting of a combination of two or more biomaterials to improve printability, shape fidelity and biofunctionality. In this article, multicomponent hydrogel-based bioink systems are systemically reviewed based on the inherent nature of the bioink (natural or synthetic hydrogels), including the most current examples demonstrating properties and advances in application of multicomponent bioinks, specifically for extrusion based 3D bioprinting. This review article will assist researchers in the field in identifying the most suitable bioink based on their requirements, as well as pinpointing current unmet challenges in the field.
AUTHOR Huang, Boyang and Vyas, Cian and Byun, Jae Jong and El-Newehy, Mohamed and Huang, Zhucheng and Bártolo, Paulo
Title Aligned multi-walled carbon nanotubes with nanohydroxyapatite in a 3D printed polycaprolactone scaffold stimulates osteogenic differentiation [Abstract]
Year 2020
Journal/Proceedings Materials Science and Engineering: C
Reftype
DOI/URL URL DOI
Abstract
The development of highly biomimetic scaffolds in terms of composition and structures, to repair or replace damaged bone tissues, is particularly relevant for tissue engineering. This paper investigates a 3D printed porous scaffold containing aligned multi-walled carbon nanotubes (MWCNTs) and nano-hydroxyapatite (nHA), mimicking the natural bone tissue from the nanoscale to macroscale level. MWCNTs with similar dimensions as collagen fibres are coupled with nHA and mixed within a polycaprolactone (PCL) matrix to produce scaffolds using a screw-assisted extrusion-based additive manufacturing system. Scaffolds with different material compositions were extensively characterised from morphological, mechanical and biological points of views. Transmission electron microscopy and polarised Raman spectroscopy confirm the presence of aligned MWCNTs within the printed filaments. The PCL/HA/MWCNTs scaffold are similar to the nanostructure of native bone and shows overall increased mechanical properties, cell proliferation, osteogenic differentiation and scaffold mineralisation, indicating a promising approach for bone tissue regeneration.
AUTHOR Kamdem Tamo, Arnaud and Doench, Ingo and Morales Helguera, Aliuska and Hoenders, Daniel and Walther, Andreas and Madrazo, Anayancy Osorio
Title Biodegradation of Crystalline Cellulose Nanofibers by Means of Enzyme Immobilized-Alginate Beads and Microparticles [Abstract]
Year 2020
Journal/Proceedings Polymers
Reftype
DOI/URL URL DOI
Abstract
Recent advances in nanocellulose technology have revealed the potential of crystalline cellulose nanofibers to reinforce materials which are useful for tissue engineering, among other functions. However, the low biodegradability of nanocellulose can possess some problems in biomedical applications. In this work, alginate particles with encapsulated enzyme cellulase extracted from Trichoderma reesei were prepared for the biodegradation of crystalline cellulose nanofibers, which carrier system could be incorporated in tissue engineering biomaterials to degrade the crystalline cellulose nanoreinforcement in situ and on-demand during tissue regeneration. Both alginate beads and microparticles were processed by extrusion-dropping and inkjet-based methods, respectively. Processing parameters like the alginate concentration, concentration of ionic crosslinker Ca2+, hardening time, and ionic strength of the medium were varied. The hydrolytic activity of the free and encapsulated enzyme was evaluated for unmodified (CNFs) and TEMPO-oxidized cellulose nanofibers (TOCNFs) in suspension (heterogeneous conditions); in comparison to solubilized cellulose derivatives (homogeneous conditions). The enzymatic activity was evaluated for temperatures between 25–75 °C, pH range from 3.5 to 8.0 and incubation times until 21 d. Encapsulated cellulase in general displayed higher activity compared to the free enzyme over wider temperature and pH ranges and for longer incubation times. A statistical design allowed optimizing the processing parameters for the preparation of enzyme-encapsulated alginate particles presenting the highest enzymatic activity and sphericity. The statistical analysis yielded the optimum particles characteristics and properties by using a formulation of 2% (w/v) alginate, a coagulation bath of 0.2 M CaCl2 and a hardening time of 1 h. In homogeneous conditions the highest catalytic activity was obtained at 55 °C and pH 4.8. These temperature and pH values were considered to study the biodegradation of the crystalline cellulose nanofibers in suspension. The encapsulated cellulase preserved its activity for several weeks over that of the free enzyme, which latter considerably decreased and practically showed deactivation after just 10 d. The alginate microparticles with their high surface area-to-volume ratio effectively allowed the controlled release of the encapsulated enzyme and thereby the sustained hydrolysis of the cellulose nanofibers. The relative activity of cellulase encapsulated in the microparticles leveled-off at around 60% after one day and practically remained at that value for three weeks.
AUTHOR Estermann, Manuela and Bisig, Christoph and Septiadi, Dedy and Petri-Fink, Alke and Rothen-Rutishauser, Barbara
Title Bioprinting for Human Respiratory and Gastrointestinal In Vitro Models [Abstract]
Year 2020
Journal/Proceedings
Reftype
DOI/URL DOI
Abstract
Increasing ethical and biological concerns require a paradigm shift toward animal-free testing strategies for drug testing and hazard assessments. To this end, the application of bioprinting technology in the field of biomedicine is driving a rapid progress in tissue engineering. In particular, standardized and reproducible in vitro models produced by three-dimensional (3D) bioprinting technique represent a possible alternative to animal models, enabling in vitro studies relevant to in vivo conditions. The innovative approach of 3D bioprinting allows a spatially controlled deposition of cells and biomaterial in a layer-by-layer fashion providing a platform for engineering reproducible models. However, despite the promising and revolutionizing character of 3D bioprinting technology, standardized protocols providing detailed instructions are lacking. Here, we provide a protocol for the automatized printing of simple alveolar, bronchial, and intestine epithelial cell layers as the basis for more complex respiratory and gastrointestinal tissue models. Such systems will be useful for high-throughput toxicity screening and drug efficacy evaluation.
AUTHOR Zamani, Yasaman and Mohammadi, Javad and Amoabediny, Ghassem and Helder, Marco N. and Zandieh-Doulabi, Behrouz and Klein-Nulend, Jenneke
Title Bioprinting of Alginate-Encapsulated Pre-osteoblasts in PLGA/β-TCP Scaffolds Enhances Cell Retention but Impairs Osteogenic Differentiation Compared to Cell Seeding after 3D-Printing [Abstract]
Year 2020
Journal/Proceedings Regenerative Engineering and Translational Medicine
Reftype Zamani2020
DOI/URL DOI
Abstract
In tissue engineering, cellularization of scaffolds has typically been performed by seeding the cells after scaffold fabrication. 3D-printing technology now allows bioprinting of cells encapsulated in a hydrogel simultaneously with the scaffold material. Here, we aimed to investigate whether bioprinting or cell seeding post-printing is more effective in enhancing responses of pre-osteoblastic MC3T3-E1 cell line derived from mouse calvaria.
AUTHOR Lee, J. M. and Sing, S. L. and Yeong, W. Y.
Title Bioprinting of Multimaterials with Computer-aided Design/Computer -aided Manufacturing [Abstract]
Year 2020
Journal/Proceedings International Journal of Bioprinting; Vol 6, No 1 (2020)
Reftype
DOI/URL URL
Abstract
Multimaterials deposition, a distinct advantage in bioprinting, overcomes material’s limitation in hydrogel-based bioprinting. Multimaterials are deposited in a build/support configuration to improve the structural integrity of three-dimensional bioprinted construct. A combination of rapid cross-linking hydrogel has been chosen for the build/support setup. The bioprinted construct was further chemically cross-linked to ensure a stable construct after print. This paper also proposes a file segmentation and preparation technique to be used in bioprinting for printing freeform structures.
AUTHOR Huang, Yen-Lin and Liang, Ching-Yeu and Ritz, Danilo and Coelho, Ricardo and Septiadi, Dedy and Estermann, Manuela and Cumin, Cécile and Rimmer, Natalie and Schötzau, Andreas and Núñez López, Mónica and Fedier, André and Konantz, Martina and Vlajnic, Tatjana and Calabrese, Diego and Lengerke, Claudia and David, Leonor and Rothen-Rutishauser, Barbara and Jacob, Francis and Heinzelmann-Schwarz, Viola
Title Collagen-rich omentum is a premetastatic niche for integrin α2-mediated peritoneal metastasis [Abstract]
Year 2020
Journal/Proceedings eLife
Reftype
DOI/URL DOI
Abstract
The extracellular matrix (ECM) plays critical roles in tumor progression and metastasis. However, the contribution of ECM proteins to early metastatic onset in the peritoneal cavity remains unexplored. Here, we suggest a new route of metastasis through the interaction of integrin alpha 2 (ITGA2) with collagens enriched in the tumor coinciding with poor outcome in patients with ovarian cancer. Using multiple gene-edited cell lines and patient-derived samples, we demonstrate that ITGA2 triggers cancer cell adhesion to collagen, promotes cell migration, anoikis resistance, mesothelial clearance, and peritoneal metastasis in vitro and in vivo. Mechanistically, phosphoproteomics identify an ITGA2-dependent phosphorylation of focal adhesion kinase and mitogen-activated protein kinase pathway leading to enhanced oncogenic properties. Consequently, specific inhibition of ITGA2-mediated cancer cell-collagen interaction or targeting focal adhesion signaling may present an opportunity for therapeutic intervention of metastatic spread in ovarian cancer.
AUTHOR Diloksumpan, Paweena and de Ruijter, Myl{`{e}}ne and Castilho, Miguel and Gbureck, Uwe and Vermonden, Tina and van Weeren, P. Ren{'{e}} and Malda, Jos and Levato, Riccardo
Title Combining multi-scale 3D printing technologies to engineer reinforced hydrogel-ceramic interfaces [Abstract]
Year 2020
Journal/Proceedings Biofabrication
Reftype
DOI/URL DOI
Abstract
Multi-material 3D printing technologies that resolve features at different lengths down to the microscale open new avenues for regenerative medicine, particularly in the engineering of tissue interfaces. Herein, extrusion printing of a bone-biomimetic ceramic ink and melt electrowriting (MEW) of spatially organized polymeric microfibres are integrated for the biofabrication of an osteochondral plug, with a mechanically reinforced bone-to-cartilage interface. A printable physiological temperature-setting bioceramic, based on α-tricalcium phosphate, nanohydroxyapatite and a custom-synthesized biodegradable and crosslinkable poloxamer, was developed as bone support. The mild setting reaction of the bone ink enabled us to print directly within melt electrowritten polycaprolactone meshes, preserving their micro-architecture. Ceramic-integrated MEW meshes protruded into the cartilage region of the composite plug, and were embedded with mechanically soft gelatin-based hydrogels, laden with articular cartilage chondroprogenitor cells. Such interlocking design enhanced the hydrogel-to-ceramic adhesion strength >6.5-fold, compared with non-interlocking fibre architectures, enabling structural stability during handling and surgical implantation in osteochondral defects ex vivo. Furthermore, the MEW meshes endowed the chondral compartment with compressive properties approaching those of native cartilage (20-fold reinforcement versus pristine hydrogel). The osteal and chondral compartment supported osteogenesis and cartilage matrix deposition in vitro, and the neo-synthesized cartilage matrix further contributed to the mechanical reinforcement at the ceramic-hydrogel interface. This multi-material, multi-scale 3D printing approach provides a promising strategy for engineering advanced composite constructs for the regeneration of musculoskeletal and connective tissue interfaces.
AUTHOR Müller, Michael and Fisch, Philipp and Molnar, Marc and Eggert, Sebastian and Binelli, Marco and Maniura-Weber, Katharina and Zenobi-Wong, Marcy
Title Development and thorough characterization of the processing steps of an ink for 3D printing for bone tissue engineering [Abstract]
Year 2020
Journal/Proceedings Materials Science and Engineering: C
Reftype
DOI/URL URL DOI
Abstract
Achieving reproducibility in the 3D printing of biomaterials requires a robust polymer synthesis method to reduce batch-to-batch variation as well as methods to assure a thorough characterization throughout the manufacturing process. Particularly biomaterial inks containing large solid fractions such as ceramic particles, often required for bone tissue engineering applications, are prone to inhomogeneity originating from inadequate mixing or particle aggregation which can lead to inconsistent printing results. The production of such an ink for bone tissue engineering consisting of gellan gum methacrylate (GG-MA), hyaluronic acid methacrylate and hydroxyapatite (HAp) particles was therefore optimized in terms of GG-MA synthesis and ink preparation process, and the ink's printability was thoroughly characterized to assure homogeneous and reproducible printing results. A new buffer mediated synthesis method for GG-MA resulted in consistent degrees of substitution which allowed the creation of large 5 g batches. We found that both the new synthesis as well as cryomilling of the polymer components of the ink resulted in a decrease in viscosity from 113 kPa·s to 11.3 kPa·s at a shear rate of 0.1 s−1 but increased ink homogeneity. The ink homogeneity was assessed through thermogravimetric analysis and a newly developed extrusion force measurement setup. The ink displayed strong inter-layer adhesion between two printed ink layers as well as between a layer of ink with and a layer without HAp. The large polymer batch production along with the characterization of the ink during the manufacturing process allows ink production in the gram scale and could be used in applications such as the printing of osteochondral grafts.
AUTHOR Tan, Wen See and Juhari, Muhammad Aidil Bin and Shi, Qian and Chen, Shengyang and Campolo, Domenico and Song, Juha
Title Development of a new additive manufacturing platform for direct freeform 3D printing of intrinsically curved flexible membranes [Abstract]
Year 2020
Journal/Proceedings Additive Manufacturing
Reftype
DOI/URL URL DOI
Abstract
The wearable technology market has been expanding from wearable medical devices for non-invasive continuous monitoring of patient vital signs to wearable devices for tracking fitness activities that any person can access. Regardless of their form or function, desirable characteristics of wearable devices are the ability to be flexible, conformal, and easily attachable to the human body. However, as the human body is intrinsically curved and irregular, flat devices often have poor interfacial adhesion with the human body. This often leads to interfacial delamination and eventual detachment of the device. Therefore, a new additive manufacturing (AM) platform, a direct freeform 3D printing process (DF3DP), is proposed to allow direct construction of intrinsically curved 3D surfaces during the material deposition phase without the need for any pre-shaped supporting molds or templates. This 3D freeform printing process involves a supporting matrix made up of calcium alginate microgels, printing material made from silicone ink, and freeform printing paths derived from customized G-codes that conform exactly to the scanned human surface profile. Curved meshes mimicking the human elbow were used as a demonstration. A static contact stability test showed that the printed 3D silicone mesh was highly conformal to the model elbow surface as compared to a 2D flat mesh. A dynamic contact stability test was also conducted by subjecting both meshes to 100 cycles of mechanical flexion and extension, proving that intrinsically curved surfaces can provide better contact stability for complex human body surfaces undergoing motion than can flat surfaces. These results have proven that intrinsically curved membranes or structures fabricated by DF3DP can reduce the interfacial shear stress and occurrence of cracks and delamination while maintaining structural integrity and stability during use without compromising the comfort of the users. Our approach can resolve interfacial issues in flexible substrates and has great potential for epidermal devices or soft robotics via its long-term sustainable performance.
AUTHOR Zhang, Hua and Cong, Yang and Osi, Amarachi Rosemary and Zhou, Yang and Huang, Fangcheng and Zaccaria, Remo P. and Chen, Jing and Wang, Rong and Fu, Jun
Title Direct 3D Printed Biomimetic Scaffolds Based on Hydrogel Microparticles for Cell Spheroid Growth [Abstract]
Year 2020
Journal/Proceedings Advanced Functional Materials
Reftype
DOI/URL DOI
Abstract
Abstract Biocompatible hydrogel inks with shear-thinning, appropriate yield strength, and fast self-healing are desired for 3D bioprinting. However, the lack of ideal 3D bioprinting inks with outstanding printability and high structural fidelity, as well as cell-compatibility, has hindered the progress of extrusion-based 3D bioprinting for tissue engineering. In this study, novel self-healable pre-cross-linked hydrogel microparticles (pcHμPs) of chitosan methacrylate (CHMA) and polyvinyl alcohol (PVA) hybrid hydrogels are developed and used as bioinks for extrusion-based 3D printing of scaffolds with high fidelity and biocompatibility. The pcHμPs display excellent shear thinning when injected through a syringe and subsequently self-heal into gels as shear forces are removed. Numerical simulations indicate that the pcHμPs experience a plug flow in the nozzle with minimal disturbance, which favors a steady and continuous printing. Moreover, the pcHμPs show a self-supportive yield strength (540 Pa), which is critical for the fidelity of printed constructs. A series of biomimetic constructs with very high aspect ratio and delicate fine structures are directly printed by using the pcHμP ink. The 3D printed scaffolds support the growth of bone-marrow-derived mesenchymal stem cells and formation of cell spheroids, which are most important for tissue engineering.
AUTHOR Sohrabi, Somayeh and kassir, Nour and Keshavarz Moraveji, Mostafa
Title Droplet microfluidics: fundamentals and its advanced applications [Abstract]
Year 2020
Journal/Proceedings RSC Advances
Reftype
DOI/URL DOI
Abstract
Droplet-based microfluidic systems have been shown to be compatible with many chemical and biological reagents and capable of performing a variety of operations that can be rendered programmable and reconfigurable. This platform has dimensional scaling benefits that have enabled controlled and rapid mixing of fluids in the droplet reactors{,} resulting in decreased reaction times. This{,} coupled with the precise generation and repeatability of droplet operations{,} has made the droplet-based microfluidic system a potent high throughput platform for biomedical research and applications. In addition to being used as micro-reactors ranging from the nano- to femtoliter (10−15 liters) range; droplet-based systems have also been used to directly synthesize particles and encapsulate many biological entities for biomedicine and biotechnology applications. For this{,} in the following article we will focus on the various droplet operations{,} as well as the numerous applications of the system and its future in many advanced scientific fields. Due to advantages of droplet-based systems{,} this technology has the potential to offer solutions to today{'}s biomedical engineering challenges for advanced diagnostics and therapeutics.
AUTHOR Huang, Boyang and Aslan, Enes and Jiang, Zhengyi and Daskalakis, Evangelos and Jiao, Mohan and Aldalbahi, Ali and Vyas, Cian and Bártolo, Paulo
Title Engineered dual-scale poly (ε-caprolactone) scaffolds using 3D printing and rotational electrospinning for bone tissue regeneration [Abstract]
Year 2020
Journal/Proceedings Additive Manufacturing
Reftype
DOI/URL URL DOI
Abstract
Large bone defects due to trauma or disease present a significant clinical challenge with limited efficacy of current therapies. A key aim is to develop biomimetic scaffolds that reflect the native tissue structure with 3D printing being an important enabling technology. However, the incorporation of multiple length scales and anisotropic features, mimicking the native architecture, is difficult with current processes. In this study, we propose a simple and versatile hybrid printing process using a screw-assisted additive manufacturing technique combined with rotational electrospinning to fabricate dual-scale anisotropic scaffolds. 3D microscale porous polycaprolactone (PCL) structures with highly aligned nanoscale fibres were successfully produced layer-by-layer. The scaffolds were morphological, mechanical and biological characterised. Human adipose-derived stem cells (hADSCs) were seeded on the hybrid scaffold to evaluate the effects of structural and anisotropic topographic cues on cell attachment, proliferation and osteogenesis differentiation. Results show that the 3D printed microscale structures have uniform and well-defined geometries and the alignment of nanoscale electrospun fibres increases by increasing the electrospinning rotational velocity. Mechanical results show that there is no significant difference between 3D printed scaffolds with or without electrospun meshes. In vitro results show higher cell seeding efficiency and proliferation in dual-scale scaffolds with high density electrospun meshes. A more stretched and elongated cell morphology was observed in aligned nanofibre scaffolds showing higher anisotropic cytoskeletal organization than 3D printed PCL scaffolds without electrospun meshes. The dual-scale scaffolds present improved overall osteogenic markers expressions (COL-1, ALP and OCN). However, no statistical difference between normalised osteogenic marker expressions were observed between dual-scale scaffolds and 3D printed scaffolds. This might be attributed to the poor bioactivity of the substrate material, PCL, suggesting topographical cues might not be sufficient to stimulate cell fate towards to an osteogenic linage. The results suggest that the proposed fabrication strategy is a promising approach for the design of novel bone scaffolds to modulate cell fates by integrating the topographic cue reported in this paper with biochemical cues associated to the use of more bioactive materials.
AUTHOR Lee, Jia Min and Yeong, Wai Yee
Title Engineering macroscale cell alignment through coordinated toolpath design using support-assisted 3D bioprinting [Abstract]
Year 2020
Journal/Proceedings Journal of The Royal Society Interface
Reftype
DOI/URL DOI
Abstract
Aligned cells provide direction-dependent mechanical properties that influence biological and mechanical function in native tissues. Alignment techniques such as casting and uniaxial stretching cannot fully replicate the complex fibre orientation of native tissue such as the heart. In this study, bioprinting is used to direct the orientation of cell alignment. A 0°–90° grid structure was printed to assess the robustness of the support-assisted bioprinting technique. The variation in the angles of the grid pattern is designed to mimic the differences in fibril orientation of native tissues, where angles of cell alignment vary across the different layers. Through bioprinting of a cell–hydrogel mixture, C2C12 cells displayed directed alignment along the longitudinal axis of printed struts. Cell alignment is induced through firstly establishing structurally stable constructs (i.e. distinct 0°–90° structures) and secondly, allowing cells to dynamically remodel the bioprinted construct. Herein reports a method of inducing a macroscale level of controlled cell alignment with angle variation. This was not achievable both in terms of methods (i.e. conventional alignment techniques such as stretching and electrical stimulation) and magnitude (i.e. hydrogel features with less than 100 µm features).
AUTHOR Song, Jie-Liang and Fu, Xin-Ye and Raza, Ali and Shen, Nai-An and Xue, Ya-Qi and Wang, Hua-Jie and Wang, Jin-Ye
Title Enhancement of mechanical strength of TCP-alginate based bioprinted constructs [Abstract]
Year 2020
Journal/Proceedings Journal of the Mechanical Behavior of Biomedical Materials
Reftype
DOI/URL URL DOI
Abstract
To overcome the mechanical drawback of bioink, we proposed a supporter model to enhance the mechanical strength of bioprinted 3D constructs, in which a unit-assembly idea was involved. Based on Computed Tomography images of critical-sized rabbit bone defect, the 3D re-construction was accomplished by a sequenced process using Mimics 17.0, BioCAM and BioCAD software. 3D constructs were bioprinted using polycaprolactone (PCL) ink for the outer supporter under extrusion mode, and cell-laden tricalcium phosphate (TCP)/alginate bioink for the inner filler under air pressure dispensing mode. The relationship of viscosity of bioinks, 3D bioprinting pressure, TCP/alginate ratio and cell survival were investigated by the shear viscosities analysis, live/dead cell test and cell-counting kit 8 measurement. The viscosity of bioinks at 1.0 s−1-shear rate could be adjusted within the range of 1.75 ± 0.29 Pa·s to 155.65 ± 10.86 Pa·s by changing alginate concentration, corresponding to 10 kPa–130 kPa of printing pressure. This design with PCL supporter could significantly enhance the compressive strength and compressive modulus of standardized 3D mechanical testing specimens up to 2.15 ± 0.14 MPa to 2.58 ± 0.09 MPa, and 42.83 ± 4.75 MPa to 53.12 ± 1.19 MPa, respectively. Cells could maintain the high viability (over 80%) under the given printing pressure but cell viability declined with the increase of TCP content. Cell survival after experiencing 7 days of cell culture could be achieved when the ratio of TCP/alginate was 1 : 4. All data supported the feasibility of the supporter and unit-assembly model to enhance mechanical properties of bioprinted 3D constructs.
AUTHOR Steier, Anke and Schmieg, Barbara and Irtel von Brenndorff, Yannic and Meier, Manuel and Nirschl, Hermann and Franzreb, Matthias and Lahann, Joerg
Title Enzyme Scaffolds with Hierarchically Defined Properties via 3D Jet Writing [Abstract]
Year 2020
Journal/Proceedings Macromolecular Bioscience
Reftype
DOI/URL DOI
Abstract
Abstract The immobilization of enzymes into polymer hydrogels is a versatile approach to improve their stability and utility in biotechnological and biomedical applications. However, these systems typically show limited enzyme activity, due to unfavorable pore dimensions and low enzyme accessibility. Here, 3D jet writing of water-based bioinks, which contain preloaded enzymes, is used to prepare hydrogel scaffolds with well-defined, tessellated micropores. After 3D jet writing, the scaffolds are chemically modified via photopolymerization to ensure mechanical stability. Enzyme loading and activity in the hydrogel scaffolds is fully retained over 3 d. Important structural parameters of the scaffolds such as pore size, pore geometry, and wall diameter are controlled with micrometer resolution to avoid mass-transport limitations. It is demonstrated that scaffold pore sizes between 120 µm and 1 mm can be created by 3D jet writing approaching the length scales of free diffusion in the hydrogels substrates and resulting in high levels of enzyme activity (21.2% activity relative to free enzyme). With further work, a broad range of applications for enzyme-laden hydrogel scaffolds including diagnostics and enzymatic cascade reactions is anticipated.
AUTHOR Dubey, Nileshkumar and Ferreira, Jessica A. and Malda, Jos and Bhaduri, Sarit B. and Bottino, Marco C.
Title Extracellular Matrix/Amorphous Magnesium Phosphate Bioink for 3D Bioprinting of Craniomaxillofacial Bone Tissue [Abstract]
Year 2020
Journal/Proceedings ACS Applied Materials & Interfaces
Reftype
DOI/URL DOI
Abstract
Bioprinting, a promising field in regenerative medicine, holds great potential to create three-dimensional, defect-specific vascularized bones with tremendous opportunities to address unmet craniomaxillofacial reconstructive challenges. A cytocompatible bioink is a critical prerequisite to successfully regenerate functional bone tissue. Synthetic self-assembling peptides have a nanofibrous structure resembling the native extracellular matrix (ECM), making them an excellent bioink component. Amorphous magnesium phosphates (AMPs) have shown greater levels of resorption while maintaining high biocompatibility, osteoinductivity, and low inflammatory response, as compared to their calcium phosphate counterparts. Here, we have established a novel bioink formulation (ECM/AMP) that combines an ECM-based hydrogel containing 2% octapeptide FEFEFKFK and 98% water with AMP particles to realize high cell function with desirable bioprintability. We analyzed the osteogenic differentiation of dental pulp stem cells (DPSCs) encapsulated in the bioink, as well as in vivo bone regeneration, to define the potential of the formulated bioink as a growth factor-free bone-forming strategy. Cell-laden AMP-modified bioprinted constructs showed an improved cell morphology but similar cell viability (∼90%) compared to their AMP-free counterpart. In functional assays, the cell-laden bioprinted constructs modified with AMP exhibited a high level of mineralization and osteogenic gene expression without the use of growth factors, thus suggesting that the presence of AMP-triggered DPSCs’ osteogenic differentiation. Cell-free ECM-based bioprinted constructs were implanted in vivo. In comparison with the ECM group, bone volume per total volume for ECM/1.0AMP was approximately 1.7- and 1.4-fold higher at 4 and 8 weeks, respectively. Further, a significant increase in the bone density was observed in ECM/1.0AMP from 4 to 8 weeks. These results demonstrate that the presence of AMP in the bioink significantly increased bone formation, thus showing promise for in situ bioprinting strategies. We foresee significant potential in translating this innovative bioink toward the regeneration of patient-specific bone tissue for regenerative dentistry. Bioprinting, a promising field in regenerative medicine, holds great potential to create three-dimensional, defect-specific vascularized bones with tremendous opportunities to address unmet craniomaxillofacial reconstructive challenges. A cytocompatible bioink is a critical prerequisite to successfully regenerate functional bone tissue. Synthetic self-assembling peptides have a nanofibrous structure resembling the native extracellular matrix (ECM), making them an excellent bioink component. Amorphous magnesium phosphates (AMPs) have shown greater levels of resorption while maintaining high biocompatibility, osteoinductivity, and low inflammatory response, as compared to their calcium phosphate counterparts. Here, we have established a novel bioink formulation (ECM/AMP) that combines an ECM-based hydrogel containing 2% octapeptide FEFEFKFK and 98% water with AMP particles to realize high cell function with desirable bioprintability. We analyzed the osteogenic differentiation of dental pulp stem cells (DPSCs) encapsulated in the bioink, as well as in vivo bone regeneration, to define the potential of the formulated bioink as a growth factor-free bone-forming strategy. Cell-laden AMP-modified bioprinted constructs showed an improved cell morphology but similar cell viability (∼90%) compared to their AMP-free counterpart. In functional assays, the cell-laden bioprinted constructs modified with AMP exhibited a high level of mineralization and osteogenic gene expression without the use of growth factors, thus suggesting that the presence of AMP-triggered DPSCs’ osteogenic differentiation. Cell-free ECM-based bioprinted constructs were implanted in vivo. In comparison with the ECM group, bone volume per total volume for ECM/1.0AMP was approximately 1.7- and 1.4-fold higher at 4 and 8 weeks, respectively. Further, a significant increase in the bone density was observed in ECM/1.0AMP from 4 to 8 weeks. These results demonstrate that the presence of AMP in the bioink significantly increased bone formation, thus showing promise for in situ bioprinting strategies. We foresee significant potential in translating this innovative bioink toward the regeneration of patient-specific bone tissue for regenerative dentistry.
AUTHOR Somasekharan, Lakshmi and Kasoju, Naresh and Raju, Riya and Bhatt, Anugya
Title Formulation and Characterization of Alginate Dialdehyde, Gelatin, and Platelet-Rich Plasma-Based Bioink for Bioprinting Applications [Abstract]
Year 2020
Journal/Proceedings Bioengineering
Reftype
DOI/URL URL DOI
Abstract
Layer-by-layer additive manufacturing process has evolved into three-dimensional (3D) “bio-printing” as a means of constructing cell-laden functional tissue equivalents. The process typically involves the mixing of cells of interest with an appropriate hydrogel, termed as “bioink”, followed by printing and tissue maturation. An ideal bioink should have adequate mechanical, rheological, and biological features of the target tissues. However, native extracellular matrix (ECM) is made of an intricate milieu of soluble and non-soluble extracellular factors, and mimicking such a composition is challenging. To this end, here we report the formulation of a multi-component bioink composed of gelatin and alginate -based scaffolding material, as well as a platelet-rich plasma (PRP) suspension, which mimics the insoluble and soluble factors of native ECM respectively. Briefly, sodium alginate was subjected to controlled oxidation to yield alginate dialdehyde (ADA), and was mixed with gelatin and PRP in various volume ratios in the presence of borax. The formulation was systematically characterized for its gelation time, swelling, and water uptake, as well as its morphological, chemical, and rheological properties; furthermore, blood- and cytocompatibility were assessed as per ISO 10993 (International Organization for Standardization). Printability, shape fidelity, and cell-laden printing was evaluated using the RegenHU 3D Discovery bioprinter. The results indicated the successful development of ADA–gelatin–PRP based bioink for 3D bioprinting and biofabrication applications.
AUTHOR Abu Awwad, Hosam Al-Deen M. and Thiagarajan, Lalitha and Kanczler, Janos M. and Amer, Mahetab H. and Bruce, Gordon and Lanham, Stuart and Rumney, Robin M. H. and Oreffo, Richard O. C. and Dixon, James E.
Title Genetically-programmed, mesenchymal stromal cell-laden & mechanically strong 3D bioprinted scaffolds for bone repair [Abstract]
Year 2020
Journal/Proceedings Journal of Controlled Release
Reftype
DOI/URL URL DOI
Abstract
Additive manufacturing processes used to create regenerative bone tissue engineered implants are not biocompatible, thereby restricting direct use with stem cells and usually require cell seeding post-fabrication. Combined delivery of stem cells with the controlled release of osteogenic factors, within a mechanically-strong biomaterial combined during manufacturing would replace injectable defect fillers (cements) and allow personalized implants to be rapidly prototyped by 3D bioprinting. Through the use of direct genetic programming via the sustained release of an exogenously delivered transcription factor RUNX2 (delivered as recombinant GET-RUNX2 protein) encapsulated in PLGA microparticles (MPs), we demonstrate that human mesenchymal stromal (stem) cells (hMSCs) can be directly fabricated into a thermo-sintered 3D bioprintable material and achieve effective osteogenic differentiation. Importantly we observed osteogenic programming of gene expression by released GET-RUNX2 (8.2-, 3.3- and 3.9-fold increases in OSX, RUNX2 and OPN expression, respectively) and calcification (von Kossa staining) in our scaffolds. The developed biodegradable PLGA/PEG paste formulation augments high-density bone development in a defect model (~2.4-fold increase in high density bone volume) and can be used to rapidly prototype clinically-sized hMSC-laden implants within minutes using mild, cytocompatible extrusion bioprinting. The ability to create mechanically strong 'cancellous bone-like’ printable implants for tissue repair that contain stem cells and controlled-release of programming factors is innovative, and will facilitate the development of novel localized delivery approaches to direct cellular behaviour for many regenerative medicine applications including those for personalized bone repair.
AUTHOR Eltaher, Hoda M. and Abukunna, Fatima E. and Ruiz-Cantu, Laura and Stone, Zack and Yang, Jing and Dixon, James E.
Title Human-scale tissues with patterned vascular networks by additive manufacturing of sacrificial sugar-protein composites [Abstract]
Year 2020
Journal/Proceedings Acta Biomaterialia
Reftype
DOI/URL URL DOI
Abstract
Combating necrosis, by supplying nutrients and removing waste, presents the major challenge for engineering large three-dimensional (3D) tissues. Previous elegant work used 3D printing with carbohydrate glass as a cytocompatible sacrificial template to create complex engineered tissues with vascular networks (Miller et al. 2012, Nature Materials). The fragile nature of this material compounded with the technical complexity needed to create high-resolution structures led us to create a flexible sugar-protein composite, termed Gelatin-sucrose matrix (GSM), to achieve a more robust and applicable material. Here we developed a low-range (25–37˚C) temperature sensitive formulation that can be moulded with micron-resolution features or cast during 3D printing to produce complex flexible filament networks forming sacrificial vessels. Using the temperature-sensitivity, we could control filament degeneration meaning GSM can be used with a variety of matrices and crosslinking strategies. Furthermore by incorporation of biocompatible crosslinkers into GSM directly, we could create thin endothelialized vessel walls and generate patterned tissues containing multiple matrices and cell-types. We also demonstrated that perfused vascular channels sustain metabolic function of a variety of cell-types including primary human cells. Importantly, we were able to construct vascularized human noses which otherwise would have been necrotic. Our material can now be exploited to create human-scale tissues for regenerative medicine applications. Statement of Significance Authentic and engineered tissues have demands for mass transport, exchanging nutrients and oxygen, and therefore require vascularization to retain viability and inhibit necrosis. Basic vascular networks must be included within engineered tissues intrinsically. Yet, this has been unachievable in physiologically-sized constructs with tissue-like cell densities until recently. Sacrificial moulding is an alternative in which networks of rigid lattices of filaments are created to prevent subsequent matrix ingress. Our study describes a biocompatible sacrificial sugar-protein formulation; GSM, made from mixtures of inexpensive and readily available bio-grade materials. GSM can be cast/moulded or bioprinted as sacrificial filaments that can rapidly dissolve in an aqueous environment temperature-sensitively. GSM material can be used to engineer viable and vascularized human-scale tissues for regenerative medicine applications.
AUTHOR Hauptstein, Julia and Böck, Thomas and Bartolf-Kopp, Michael and Forster, Leonard and Stahlhut, Philipp and Nadernezhad, Ali and Blahetek, Gina and Zernecke-Madsen, Alma and Detsch, Rainer and Jüngst, Tomasz and Groll, Jürgen and Teßmar, Jörg and Blunk, Torsten
Title Hyaluronic Acid-Based Bioink Composition Enabling 3D Bioprinting and Improving Quality of Deposited Cartilaginous Extracellular Matrix [Abstract]
Year 2020
Journal/Proceedings Advanced Healthcare Materials
Reftype
DOI/URL DOI
Abstract
Abstract In 3D bioprinting, bioinks with high concentrations of polymeric materials are frequently used to enable fabrication of 3D cell-hydrogel constructs with sufficient stability. However, this is often associated with restricted cell bioactivity and an inhomogeneous distribution of newly produced extracellular matrix (ECM). Therefore, this study investigates bioink compositions based on hyaluronic acid (HA), an attractive material for cartilage regeneration, which allow for reduction of polymer content. Thiolated HA and allyl-modified poly(glycidol) in varying concentrations are UV-crosslinked. To adapt bioinks to poly(ε-caprolactone) (PCL)-supported 3D bioprinting, the gels are further supplemented with 1 wt% unmodified high molecular weight HA (hmHA) and chondrogenic differentiation of incorporated human mesenchymal stromal cells is assessed. Strikingly, addition of hmHA to gels with a low polymer content (3 wt%) results in distinct increase of construct quality with a homogeneous ECM distribution throughout the constructs, independent of the printing process. Improved ECM distribution in those constructs is associated with increased construct stiffness after chondrogenic differentiation, as compared to higher concentrated constructs (10 wt%), which only show pericellular matrix deposition. The study contributes to effective bioink development, demonstrating dual function of a supplement enabling PCL-supported bioprinting and at the same time improving biological properties of the resulting constructs.
AUTHOR De Moor, Lise and Fernandez, Sélina and Vercruysse, Chris and Tytgat, Liesbeth and Asadian, Mahtab and De Geyter, Nathalie and Van Vlierberghe, Sandra and Dubruel, Peter and Declercq, Heidi
Title Hybrid Bioprinting of Chondrogenically Induced Human Mesenchymal Stem Cell Spheroids [Abstract]
Year 2020
Journal/Proceedings Frontiers in Bioengineering and Biotechnology
Reftype
DOI/URL DOI
Abstract
To date, the treatment of articular cartilage lesions remains challenging. A promising strategy for the development of new regenerative therapies is hybrid bioprinting, combining the principles of developmental biology, biomaterial science, and 3D bioprinting. In this approach, scaffold-free cartilage microtissues with small diameters are used as building blocks, combined with a photo-crosslinkable hydrogel and subsequently bioprinted. Spheroids of human bone marrow-derived mesenchymal stem cells (hBM-MSC) are created using a high-throughput microwell system and chondrogenic differentiation is induced during 42 days by applying chondrogenic culture medium and low oxygen tension (5%). Stable and homogeneous cartilage spheroids with a mean diameter of 116 ± 2.80 μm, which is compatible with bioprinting, were created after 14 days of culture and a glycosaminoglycans (GAG)- and collagen II-positive extracellular matrix (ECM) was observed. Spheroids were able to assemble at random into a macrotissue, driven by developmental biology tissue fusion processes, and after 72 h of culture, a compact macrotissue was formed. In a directed assembly approach, spheroids were assembled with high spatial control using the bio-ink based extrusion bioprinting approach. Therefore, 14-day spheroids were combined with a photo-crosslinkable methacrylamide-modified gelatin (gelMA) as viscous printing medium to ensure shape fidelity of the printed construct. The photo-initiators Irgacure 2959 and Li-TPO-L were evaluated by assessing their effect on bio-ink properties and the chondrogenic phenotype. The encapsulation in gelMA resulted in further chondrogenic maturation observed by an increased production of GAG and a reduction of collagen I. Moreover, the use of Li-TPO-L lead to constructs with lower stiffness which induced a decrease of collagen I and an increase in GAG and collagen II production. After 3D bioprinting, spheroids remained viable and the cartilage phenotype was maintained. Our findings demonstrate that hBM-MSC spheroids are able to differentiate into cartilage microtissues and display a geometry compatible with 3D bioprinting. Furthermore, for hybrid bioprinting of these spheroids, gelMA is a promising material as it exhibits favorable properties in terms of printability and it supports the viability and chondrogenic phenotype of hBM-MSC microtissues. Moreover, it was shown that a lower hydrogel stiffness enhances further chondrogenic maturation after bioprinting.
AUTHOR Strauß, Svenja and Meutelet, Rafaela and Radosevic, Luka and Gretzinger, Sarah and Hubbuch, Jürgen
Title Image analysis as PAT-Tool for use in extrusion-based bioprinting [Abstract]
Year 2020
Journal/Proceedings Bioprinting
Reftype
DOI/URL URL DOI
Abstract
The technology of bioprinting is arousing a growing interest in biopharmaceutical research and industry. In order to accelerate process development in the field of bioprinting, image-based analysis methods are non-invasive, time- and cost-saving tools which are usable for printer characterization, bioink printability evaluation, and process optimization. Image processing can also be used for the study of reproducibility, since reliable production is important in the transition from research to industrial application, and more precisely to clinical studies. This study revolves around the establishment of an automated and image-based line analysis method for bioprinting applications which enables an easy comparison of 3D-printed lines. Diverse rheological properties of bioinks and the printing process affect the geometry of the resulting object. The line represents a simple geometry, where the influence of the rheological properties and printing parameters is directly apparent. Therefore, a method for line analysis was developed on the basis of image recognition. At first, the method is tested for several substances such as Nivea®, pure and colored Kolliphor solutions, and two commercially available hydrogel formulations which can be used as bioinks. These are Biogelx™-ink-RGD by Biogelx and Cellink® Bioink by Cellink. The examination of limitations showed that transparent materials such as Kolliphor-based solutions cannot be analyzed with the developed method whereas opaque materials such as Nivea® and both bioinks can be analyzed. In the course of process characterization, the method was used to investigate the shrinkage behavior for both bionks. With the help of the line analysis tool, a shrinkage behavior of both bioinks was demonstrated and thus, process time could be identified as a critical process parameter.
AUTHOR López-Carrasco, Amparo and Martín-Vañó, Susana and Burgos-Panadero, Rebeca and Monferrer, Ezequiel and Berbegall, Ana P. and Fernández-Blanco, Beatriz and Navarro, Samuel and Noguera, Rosa
Title Impact of extracellular matrix stiffness on genomic heterogeneity in MYCN-amplified neuroblastoma cell line [Abstract]
Year 2020
Journal/Proceedings Journal of Experimental & Clinical Cancer Research
Reftype López-Carrasco2020
DOI/URL DOI
Abstract
Increased tissue stiffness is a common feature of malignant solid tumors, often associated with metastasis and poor patient outcomes. Vitronectin, as an extracellular matrix anchorage glycoprotein related to a stiff matrix, is present in a particularly increased quantity and specific distribution in high-risk neuroblastoma. Furthermore, as cells can sense and transform the proprieties of the extracellular matrix into chemical signals through mechanotransduction, genotypic changes related to stiffness are possible.
AUTHOR Fisch, Philipp and Holub, Martin and Zenobi-Wong, Marcy
Title Improved accuracy and precision of bioprinting through progressive cavity pump-controlled extrusion [Abstract]
Year 2020
Journal/Proceedings bioRxiv
Reftype
DOI/URL URL DOI
Abstract
3D bioprinting has seen a tremendous growth in recent years in a variety of fields such as tissue and organ models, drug testing and regenerative medicine. This growth has led researchers and manufacturers to continuously advance and develop novel bioprinting techniques and materials. Although new bioprinting methods are emerging (e.g. contactless and volumetric bioprinting), micro-extrusion bioprinting remains the most widely used method. Micro-extrusion bioprinting, however, is still largely dependent on the conventional pneumatic extrusion process, which relies heavily on homogenous biomaterial inks and bioinks to maintain a constant material flowrate. Augmenting the functionality of the bioink with the addition of nanoparticles, cells or biopolymers can induce inhomogeneities resulting in uneven material flow during printing and/or clogging of the nozzle, leading to defects in the printed construct. In this work, we evaluated a novel extrusion technique based on a miniaturized progressive cavity pump. We compared the accuracy and precision of this system to the pneumatic extrusion system and tested both for their effect on cell viability after extrusion. The progressive cavity pump achieved a significantly higher accuracy and precision compared to the pneumatic system while maintaining good viability and was able to maintain its reliability independently of the bioink composition, printing speed or nozzle size. Progressive cavity pumps are a promising tool for bioprinting and could help provide standardized and validated bioprinted constructs while leaving the researcher more freedom in the design of the bioinks with increased functionality.
AUTHOR Hou, Yanhao and Wang, Weiguang and Bartolo, Paulo Jorge Da Silva
Title Investigating the Effect of Carbon Nanomaterials Reinforcing Poly(Ε-Caprolactone) Scaffolds for Bone Repair Applications [Abstract]
Year 2020
Journal/Proceedings International Journal of Bioprinting
Reftype
DOI/URL URL
Abstract
Scaffolds, three-dimensional (3D) substrates providing appropriate mechanical support and biological environments for new tissue formation, are the most common approaches in tissue engineering. To improve scaffold properties such as mechanical properties, surface characteristics, biocompatibility and biodegradability, different types of fillers have been used reinforcing biocompatible and biodegradable polymers. This paper investigates and compares the mechanical and biological behaviors of 3D printed poly(ε-caprolactone) scaffolds reinforced with graphene (G) and graphene oxide (GO) at different concentrations. Results show that contrary to G which improves mechanical properties and enhances cell attachment and proliferation, GO seems to show some cytotoxicity, particular at high contents.
AUTHOR Šimková, Kateřina and Thormann, Ursula and Imanidis, Georgios
Title Investigation of drug dissolution and uptake from low-density DPI formulations in an impactor–integrated cell culture model [Abstract]
Year 2020
Journal/Proceedings European Journal of Pharmaceutics and Biopharmaceutics
Reftype
DOI/URL URL DOI
Abstract
Besides deposition, pulmonary bioavailability is determined by dissolution of particles in the scarce epithelial fluid and by cellular API uptake. In the present work, we have developed an experimental in vitro model, which is combining the state-of-the-art next generation impactor (NGI), used for aerodynamic performance assessment of inhalation products, with a culture of human alveolar A549 epithelial cells to study the fate of inhaled drugs following lung deposition. The goal was to investigate five previously developed nano-milled and spray-dried budesonide formulations and to examine the suitability of the in vitro test model. The NGI dissolution cups of stages 3, 4, and 5 were transformed to accommodate cell culture inserts while assuring minimal interference with the air flow. A549 cells were cultivated at the air–liquid interface on Corning® Matrigel® -coated inserts. After deposition of aerodynamically classified powders on the cell cultures, budesonide amount was determined on the cell surface, in the interior of the cell monolayer, and in the basal solution for four to eight hours. Significant differences in the total deposited drug amount and the amount remaining on the cell surface at the end of the experiment were found between different formulations and NGI stages. Roughly 50% of budesonide was taken up by the cells and converted to a large extent to its metabolic conjugate with oleic acid for all formulations and stages. Prolonged time required for complete drug dissolution and cell uptake in case of large deposited powder amounts suggested initial drug saturation of the surfactant layer of the cell surface. Discrimination between formulations with respect to time scale of dissolution and cell uptake was possible with the present test model providing useful insights into the biopharmaceutical performance of developed formulations that may be relevant for predicting local bioavailability. The absolute quantitative result of cell uptake and permeation into the systemic compartment is unreliable, though, because of partly compromised cell membrane integrity due to particle impaction and professed leakiness of A549 monolayer tight junctions, respectively.
AUTHOR Rafiee, Mohammad and Farahani, Rouhollah D. and Therriault, Daniel
Title Multi-Material 3D and 4D Printing: A Survey [Abstract]
Year 2020
Journal/Proceedings Advanced Science
Reftype
DOI/URL DOI
Abstract
Abstract Recent advances in multi-material 3D and 4D printing (time as the fourth dimension) show that the technology has the potential to extend the design space beyond complex geometries. The potential of these additive manufacturing (AM) technologies allows for functional inclusion in a low-cost single-step manufacturing process. Different composite materials and various AM technologies can be used and combined to create customized multi-functional objects to suit many needs. In this work, several types of 3D and 4D printing technologies are compared and the advantages and disadvantages of each technology are discussed. The various features and applications of 3D and 4D printing technologies used in the fabrication of multi-material objects are reviewed. Finally, new avenues for the development of multi-material 3D and 4D printed objects are proposed, which reflect the current deficiencies and future opportunities for inclusion by AM.
AUTHOR Ruiz-Cantu, Laura and Gleadall, Andrew and Faris, Callum and Segal, Joel and Shakesheff, Kevin and Yang, Jing
Title Multi-material 3D bioprinting of porous constructs for cartilage regeneration [Abstract]
Year 2020
Journal/Proceedings Materials Science and Engineering: C
Reftype
DOI/URL URL DOI
Abstract
The current gold standard for nasal reconstruction after rhinectomy or severe trauma includes transposition of autologous cartilage grafts in conjunction with coverage using an autologous skin flap. Harvesting autologous cartilage requires a major additional procedure that may create donor site morbidity. Major nasal reconstruction also requires sculpting autologous cartilages to form a cartilage framework, which is complex, highly skill-demanding and very time consuming. These limitations have prompted facial reconstructive surgeons to explore different techniques such as tissue engineered cartilage. This work explores the use of multi-material 3D bioprinting with chondrocyte-laden gelatin methacrylate (GelMA) and polycaprolactone (PCL) to fabricate constructs that can potentially be used for nasal reconstruction. In this study, we have investigated the effect of 3D manufacturing parameters including temperature, needle gauge, UV exposure time, and cell carrier formulation (GelMA) on the viability and functionality of chondrocytes in bioprinted constructs. Furthermore, we printed chondrocyte-laden GelMA and PCL into composite constructs to combine biological and mechanical properties. It was found that 20% w/v GelMA was the best concentration for the 3D bioprinting of the chondrocytes without comprising the scaffold's porous structure and cell functionality. In addition, the 3D bioprinted constructs showed neocartilage formation and similar mechanical properties to nasal alar cartilage after a 50-day culture period. Neocartilage formation was also observed in the composite constructs evidenced by the presence of glycosaminoglycans and collagen type II. This study shows the feasibility of manufacturing neocartilage using chondrocytes/GelMA/PCL 3D bioprinted porous constructs which could be applied as a method for fabricating implants for nose reconstruction.
AUTHOR Rupp, Harald and Binder, Wolfgang H.
Title Multicomponent Stress-Sensing Composites Fabricated by 3D-Printing Methodologies [Abstract]
Year 2020
Journal/Proceedings Macromolecular Rapid Communications
Reftype
DOI/URL DOI
Abstract
Abstract The preparation and characterization of mechanoresponsive, 3D-printed composites are reported using a dual-printing setup for both, liquid dispensing and fused-deposition-modeling. The here reported stress-sensing materials are based on high- and low molecular weight mechanophores, including poly(ε-caprolactone)-, polyurethane-, and alkyl(C11)-based latent copper(I)bis(N-heterocyclic carbenes), which can be activated by compression to trigger a fluorogenic, copper(I)-catalyzed azide/alkyne “click”-reaction of an azide-functionalized fluorescent dye inside a bulk polymeric material. Focus is placed on the printability and postprinting activity of the latent mechanophores and the fluorogenic “click”-components. The multicomponent specimen containing both, azide and alkyne, are manufactured via a 3D-printer to place the components separately inside the specimen into void spaces generated during the FDM-process, which subsequently are filled with liquids using a separate liquid dispenser, located within the same 3D-printing system. The low-molecular weight mechanophores bearing the alkyl-C11 chains display the best printability, yielding a mechanochemical response after the 3D-printing process.
AUTHOR Plou, Javier and García, Isabel and Charconnet, Mathias and Astobiza, Ianire and García-Astrain, Clara and Matricardi, Cristiano and Mihi, Agustín and Carracedo, Arkaitz and Liz-Marzán, Luis M.
Title Multiplex SERS Detection of Metabolic Alterations in Tumor Extracellular Media [Abstract]
Year 2020
Journal/Proceedings Advanced Functional Materials
Reftype
DOI/URL DOI
Abstract
Abstract The composition and intercellular interactions of tumor cells in the tissues dictate the biochemical and metabolic properties of the tumor microenvironment. The metabolic rewiring has a profound impact on the properties of the microenvironment, to an extent that monitoring such perturbations could harbor diagnostic and therapeutic relevance. A growing interest in these phenomena has inspired the development of novel technologies with sufficient sensitivity and resolution to monitor metabolic alterations in the tumor microenvironment. In this context, surface-enhanced Raman scattering (SERS) can be used for the label-free detection and imaging of diverse molecules of interest among extracellular components. Herein, the application of nanostructured plasmonic substrates comprising Au nanoparticles, self-assembled as ordered superlattices, to the precise SERS detection of selected tumor metabolites, is presented. The potential of this technology is first demonstrated through the analysis of kynurenine, a secreted immunomodulatory derivative of the tumor metabolism and the related molecules tryptophan and purine derivatives. SERS facilitates the unambiguous identification of trace metabolites and allows the multiplex detection of their characteristic fingerprints under different conditions. Finally, the effective plasmonic SERS substrate is combined with a hydrogel-based three-dimensional cancer model, which recreates the tumor microenvironment, for the real-time imaging of metabolite alterations and cytotoxic effects on tumor cells.
AUTHOR Lee, Mihyun and Bae, Kraun and Levinson, Clara and Zenobi-Wong, Marcy
Title Nanocomposite bioink exploits dynamic covalent bonds between nanoparticles and polysaccharides for precision bioprinting [Abstract]
Year 2020
Journal/Proceedings Biofabrication
Reftype
DOI/URL DOI
Abstract
The field of bioprinting has made significant recent progress towards engineering tissues with increasing complexity and functionality. It remains challenging, however, to develop bioinks with optimal biocompatibility and good printing fidelity. Here, we demonstrate enhanced printability of a polymer-based bioink based on dynamic covalent linkages between nanoparticles (NPs) and polymers, which retains good biocompatibility. Amine-presenting silica NPs (ca. 45 nm) were added to a polymeric ink containing oxidized alginate (OxA). The formation of reversible imine bonds between amines on the NPs and aldehydes of OxA lead to significantly improved rheological properties and high printing fidelity. In particular, the yield stress increased with increasing amounts of NPs (14.5 Pa without NPs, 79 Pa with 2 wt% NPs). In addition, the presence of dynamic covalent linkages in the gel provided improved mechanical stability over 7 d compared to ionically crosslinked gels. The nanocomposite ink retained high printability and mechanical strength, resulting in generation of centimeter-scale porous constructs and an ear structure with overhangs and high structural fidelity. Furthermore, the nanocomposite ink supported both in vitro and in vivo maturation of bioprinted gels containing chondrocytes. This approach based on simple oxidation can be applied to any polysaccharide, thus the widely applicability of the method is expected to advance the field towards the goal of precision bioprinting.
AUTHOR Hou, Yanhao and Wang, Weiguang and Bártolo, Paulo
Title Novel Poly(ɛ-caprolactone)/Graphene Scaffolds for Bone Cancer Treatment and Bone Regeneration [Abstract]
Year 2020
Journal/Proceedings 3D Printing and Additive Manufacturing
Reftype
DOI/URL DOI
Abstract
Scaffold-based bone tissue engineering is the most relevant approach for critical-sized bone defects. It is based on the use of three-dimensional substrates to provide the appropriate biomechanical environment for bone regeneration. Despite some successful results previously reported, scaffolds were never designed for disease treatment applications. This article proposes a novel dual-functional scaffold for cancer applications, comprising both treatment and regeneration functions. These functions are achieved by combining a biocompatible and biodegradable polymer and graphene. Results indicate that high concentrations of graphene enhance the mechanical properties of the scaffolds, also increasing the inhibition on cancer cell viability and proliferation.
AUTHOR Lim, Khoon S. and Abinzano, Florencia and Bernal, Paulina Nuñez and Albillos Sanchez, Ane and Atienza-Roca, Pau and Otto, Iris A. and Peiffer, Quentin C. and Matsusaki, Michiya and Woodfield, Tim B. F. and Malda, Jos and Levato, Riccardo
Title One-Step Photoactivation of a Dual-Functionalized Bioink as Cell Carrier and Cartilage-Binding Glue for Chondral Regeneration [Abstract]
Year 2020
Journal/Proceedings Advanced Healthcare Materials
Reftype
DOI/URL DOI
Abstract
Abstract Cartilage defects can result in pain, disability, and osteoarthritis. Hydrogels providing a chondroregeneration-permissive environment are often mechanically weak and display poor lateral integration into the surrounding cartilage. This study develops a visible-light responsive gelatin ink with enhanced interactions with the native tissue, and potential for intraoperative bioprinting. A dual-functionalized tyramine and methacryloyl gelatin (GelMA-Tyr) is synthesized. Photo-crosslinking of both groups is triggered in a single photoexposure by cell-compatible visible light in presence of tris(2,2′-bipyridyl)dichlororuthenium(II) and sodium persulfate as initiators. Neo-cartilage formation from embedded chondroprogenitor cells is demonstrated in vitro, and the hydrogel is successfully applied as bioink for extrusion-printing. Visible light in situ crosslinking in cartilage defects results in no damage to the surrounding tissue, in contrast to the native chondrocyte death caused by UV light (365–400 nm range), commonly used in biofabrication. Tyramine-binding to proteins in native cartilage leads to a 15-fold increment in the adhesive strength of the bioglue compared to pristine GelMA. Enhanced adhesion is observed also when the ink is extruded as printable filaments into the defect. Visible-light reactive GelMA-Tyr bioinks can act as orthobiologic carriers for in situ cartilage repair, providing a permissive environment for chondrogenesis, and establishing safe lateral integration into chondral defects.
AUTHOR Diloksumpan, Paweena and Bolaños, Rafael Vindas and Cokelaere, Stefan and Pouran, Behdad and de Grauw, Janny and van Rijen, Mattie and van Weeren, René and Levato, Riccardo and Malda, Jos
Title Orthotopic Bone Regeneration within 3D Printed Bioceramic Scaffolds with Region-Dependent Porosity Gradients in an Equine Model [Abstract]
Year 2020
Journal/Proceedings Advanced Healthcare Materials
Reftype
DOI/URL DOI
Abstract
Abstract The clinical translation of three-dimensionally printed bioceramic scaffolds with tailored architectures holds great promise toward the regeneration of bone to heal critical-size defects. Herein, the long-term in vivo performance of printed hydrogel-ceramic composites made of methacrylated-oligocaprolactone-poloxamer and low-temperature self-setting calcium-phosphates is assessed in a large animal model. Scaffolds printed with different internal architectures, displaying either a designed porosity gradient or a constant pore distribution, are implanted in equine tuber coxae critical size defects. Bone ingrowth is challenged and facilitated only from one direction via encasing the bioceramic in a polycaprolactone shell. After 7 months, total new bone volume and scaffold degradation are significantly greater in structures with constant porosity. Interestingly, gradient scaffolds show lower extent of remodeling and regeneration even in areas having the same porosity as the constant scaffolds. Low regeneration in distal regions from the interface with native bone impairs ossification in proximal regions of the construct, suggesting that anisotropic architectures modulate the cross-talk between distant cells within critical-size defects. The study provides key information on how engineered architectural patterns impact osteoregeneration in vivo, and also indicates the equine tuber coxae as promising orthotopic model for studying materials stimulating bone formation.
AUTHOR Chen, Grona and Xu, Yihua and Chi Lip Kwok, Philip and Kang, Lifeng
Title Pharmaceutical Applications of 3D Printing [Abstract]
Year 2020
Journal/Proceedings Additive Manufacturing
Reftype
DOI/URL URL DOI
Abstract
Although 3D printing (3DP) has long been an integral part of industries such as aviation and automotive, its use in healthcare, especially the pharmaceutical industry, is relatively new and currently receiving close attention. At the beginning of 2018, we reviewed the applications of 3DP for drug delivery and drug testing [1]. Due to the rapid development of this field, it is necessary to summarize the latest development in this field after 2 years. In this article, we reviewed the three major areas in pharmaceutical applications. First, drug delivery system is the most studied subject, including controlled release, polypills, gastrofloating, orodispersibles and microneedles. Second, 3DP also helped the development of pharmaceutical devices, including pharmacy dispensing aids and drug eluting devices. Lastly, we reviewed the pharmaceutical models for drug testing, covering acellular and cellular models. We also summarized the materials used in the mentioned articles and their regulatory status for pharmaceutical applications to provide references for future research.
AUTHOR Bedell, Matthew L. and Navara, Adam M. and Du, Yingying and Zhang, Shengmin and Mikos, Antonios G.
Title Polymeric Systems for Bioprinting [Abstract]
Year 2020
Journal/Proceedings Chemical Reviews
Reftype
DOI/URL DOI
Abstract
Bioprinting is rapidly being adopted as a major method for fabricating tissue engineering constructs. Through the precise deposition of cell- and bioactive molecule-laden materials, bioprinting offers researchers a means to create biological constructs with enhanced spatial complexity that more closely mimics native tissue. The vast majority of materials used in bioprinting have been polymers due to their suitability toward resembling the cellular environment and the variety of methods available to process polymeric systems in ambient or relatively mild chemical and environmental conditions. In this review, we will discuss in detail the wide variety of natural and synthetic polymers that have been employed as inks in bioprinting. We will review recent bioprinting innovations, such as increasing architectural complexity and cell viability in heterogeneous tissue constructs, which allow for the investigation of biological questions that could not be addressed before. We will also survey nascent fields of study that promise to further advance the development of novel biofabrication technologies in the field, such as 4D bioprinting and the inclusion of nanomaterials. To conclude, we will examine some of the necessary steps that must take place to bring this technology to commercial markets and facilitate its use in clinical therapies. Bioprinting is rapidly being adopted as a major method for fabricating tissue engineering constructs. Through the precise deposition of cell- and bioactive molecule-laden materials, bioprinting offers researchers a means to create biological constructs with enhanced spatial complexity that more closely mimics native tissue. The vast majority of materials used in bioprinting have been polymers due to their suitability toward resembling the cellular environment and the variety of methods available to process polymeric systems in ambient or relatively mild chemical and environmental conditions. In this review, we will discuss in detail the wide variety of natural and synthetic polymers that have been employed as inks in bioprinting. We will review recent bioprinting innovations, such as increasing architectural complexity and cell viability in heterogeneous tissue constructs, which allow for the investigation of biological questions that could not be addressed before. We will also survey nascent fields of study that promise to further advance the development of novel biofabrication technologies in the field, such as 4D bioprinting and the inclusion of nanomaterials. To conclude, we will examine some of the necessary steps that must take place to bring this technology to commercial markets and facilitate its use in clinical therapies.
AUTHOR Cernecu, Alexandra and Lungu, Adriana and Stancu, Izabela Cristina and Vasile, Eugeniu and Iovu, Horia
Title Polysaccharide-Based 3D Printing Inks Supplemented with Additives
Year 2020
Journal/Proceedings University Politechnica of Bucharest Scientific Bulletin
Reftype
DOI/URL URL
AUTHOR Schwab, Andrea and Levato, Riccardo and D’Este, Matteo and Piluso, Susanna and Eglin, David and Malda, Jos
Title Printability and Shape Fidelity of Bioinks in 3D Bioprinting [Abstract]
Year 2020
Journal/Proceedings Chemical Reviews
Reftype
DOI/URL DOI
Abstract
Three-dimensional bioprinting uses additive manufacturing techniques for the automated fabrication of hierarchically organized living constructs. The building blocks are often hydrogel-based bioinks, which need to be printed into structures with high shape fidelity to the intended computer-aided design. For optimal cell performance, relatively soft and printable inks are preferred, although these undergo significant deformation during the printing process, which may impair shape fidelity. While the concept of good or poor printability seems rather intuitive, its quantitative definition lacks consensus and depends on multiple rheological and chemical parameters of the ink. This review discusses qualitative and quantitative methodologies to evaluate printability of bioinks for extrusion- and lithography-based bioprinting. The physicochemical parameters influencing shape fidelity are discussed, together with their importance in establishing new models, predictive tools and printing methods that are deemed instrumental for the design of next-generation bioinks, and for reproducible comparison of their structural performance. Three-dimensional bioprinting uses additive manufacturing techniques for the automated fabrication of hierarchically organized living constructs. The building blocks are often hydrogel-based bioinks, which need to be printed into structures with high shape fidelity to the intended computer-aided design. For optimal cell performance, relatively soft and printable inks are preferred, although these undergo significant deformation during the printing process, which may impair shape fidelity. While the concept of good or poor printability seems rather intuitive, its quantitative definition lacks consensus and depends on multiple rheological and chemical parameters of the ink. This review discusses qualitative and quantitative methodologies to evaluate printability of bioinks for extrusion- and lithography-based bioprinting. The physicochemical parameters influencing shape fidelity are discussed, together with their importance in establishing new models, predictive tools and printing methods that are deemed instrumental for the design of next-generation bioinks, and for reproducible comparison of their structural performance.
AUTHOR Athanasiadis, Markos and Afanasenkau, Dzmitry and Derks, Wouter and Tondera, Christoph and Murganti, Francesca and Busskamp, Volker and Bergmann, Olaf and Minev, Ivan R.
Title Printed elastic membranes for multimodal pacing and recording of human stem-cell-derived cardiomyocytes [Abstract]
Year 2020
Journal/Proceedings npj Flexible Electronics
Reftype Athanasiadis2020
DOI/URL DOI
Abstract
Bioelectronic interfaces employing arrays of sensors and bioactuators are promising tools for the study, repair and engineering of cardiac tissues. They are typically constructed from rigid and brittle materials processed in a cleanroom environment. An outstanding technological challenge is the integration of soft materials enabling a closer match to the mechanical properties of biological cells and tissues. Here we present an algorithm for direct writing of elastic membranes with embedded electrodes, optical waveguides and microfluidics using a commercial 3D printing system and a palette of silicone elastomers. As proof of principle, we demonstrate interfacing of cardiomyocytes derived from human induced pluripotent stem cells (hiPSCs), which are engineered to express Channelrhodopsin-2. We demonstrate electrical recording of cardiomyocyte field potentials and their concomitant modulation by optical and pharmacological stimulation delivered via the membrane. Our work contributes a simple prototyping strategy with potential applications in organ-on-chip or implantable systems that are multi-modal and mechanically soft.
AUTHOR Figueiredo, Lara and Le Visage, Catherine and Weiss, Pierre and Yang, Jing
Title Quantifying Oxygen Levels in 3D Bioprinted Cell-Laden Thick Constructs with Perfusable Microchannel Networks [Abstract]
Year 2020
Journal/Proceedings Polymers
Reftype
DOI/URL URL DOI
Abstract
The survival and function of thick tissue engineered implanted constructs depends on pre-existing, embedded, functional, vascular-like structures that are able to integrate with the host vasculature. Bioprinting was employed to build perfusable vascular-like networks within thick constructs. However, the improvement of oxygen transportation facilitated by these vascular-like networks was directly quantified. Using an optical fiber oxygen sensor, we measured the oxygen content at different positions within 3D bioprinted constructs with and without perfusable microchannel networks. Perfusion was found to play an essential role in maintaining relatively high oxygen content in cell-laden constructs and, consequently, high cell viability. The concentration of oxygen changes following switching on and off the perfusion. Oxygen concentration depletes quickly after pausing perfusion but recovers rapidly after resuming the perfusion. The quantification of oxygen levels within cell-laden hydrogel constructs could provide insight into channel network design and cellular responses.
AUTHOR Tan, Wen See and Shi, Qian and Chen, Shengyang and Bin Juhari, Muhammad Aidil and Song, Juha
Title Recyclable and biocompatible microgel-based supporting system for positive 3D freeform printing of silicone rubber [Abstract]
Year 2020
Journal/Proceedings Biomedical Engineering Letters
Reftype Tan2020
DOI/URL DOI
Abstract
Additive manufacturing (AM) of biomaterials has evolved from a rapid prototyping tool into a viable approach for the manufacturing of patient-specific implants over the past decade. It can tailor to the unique physiological and anatomical criteria of the patient’s organs or bones through precise controlling of the structure during the 3D printing. Silicone elastomers, which is a major group of materials in many biomedical implants, have low viscosities and can be printed with a special AM platform, known as freeform 3D printing systems. The freeform 3D printing systems are composed of a supporting bath and a printing material. Current supporting matrices that are either commercially purchased or synthesized were usually disposed of after retrieval of the printed part. In this work, we proposed a new and improved supporting matrix comprises of synthesized calcium alginate microgels produced via encapsulation which can be recycled, reused, and recovered for multiple prints, hence minimizing wastage and cost of materials. The dehydration tolerance of the calcium alginate microgels was improved through physical means by the addition of glycerol and chemical means by developing new calcium alginate microgels encapsulated with glycerol. The recyclability of the heated calcium alginate microgels was also enhanced by a rehydration step with sodium chloride solution and a recovery step with calcium chloride solution via the ion exchange process. We envisaged that our reusable and recyclable biocompatible calcium alginate microgels can save material costs, time, and can be applied in various freeform 3D printing systems.
AUTHOR Schipani, Rossana and Scheurer, Stefan and Florentin, Romain and Critchley, Susan E. and Kelly, Daniel John
Title Reinforcing interpenetrating network hydrogels with 3D printed polymer networks to engineer cartilage mimetic composites [Abstract]
Year 2020
Journal/Proceedings Biofabrication
Reftype
DOI/URL DOI
Abstract
Engineering constructs that mimic the complex structure, composition and biomechanics of the articular cartilage represents a promising route to joint regeneration. Such tissue engineering strategies require the development of biomaterials that mimic the mechanical properties of articular cartilage whilst simultaneously providing an environment supportive of chondrogenesis. Here three-dimensional (3D) bioprinting is used to develop polycaprolactone (PCL) fibre networks to mechanically reinforce interpenetrating network (IPN) hydrogels consisting of alginate and gelatin methacryloyl (GelMA). Inspired by the significant tension-compression nonlinearity of the collagen network in articular cartilage, we printed reinforcing PCL networks with different ratios of tensile to compressive modulus. Synergistic increases in compressive modulus were observed when IPN hydrogels were reinforced with PCL networks that were relatively soft in compression and stiff in tension. The resulting composites possessed equilibrium and dynamic mechanical properties that matched or approached that of native articular cartilage. Finite Element (FE) modelling revealed that the reinforcement of IPN hydrogels with specific PCL networks limited radial expansion and increased the hydrostatic pressure generated within the IPN upon the application of compressive loading. Next, multiple-tool biofabrication techniques were used to 3D bioprint PCL reinforced IPN hydrogels laden with a co-culture of bone marrow-derived stromal cells (BMSCs) and chondrocytes (CCs). The bioprinted biomimetic composites were found to support robust chondrogenesis, with encapsulated cells producing hyaline-like cartilage that stained strongly for sGAG and type II collagen deposition, and negatively for type X collagen and calcium deposition. Taken together, these results demonstrate how 3D bioprinting can be used to engineer constructs that are both pro-chondrogenic and biomimetic of the mechanical properties of articular cartilage.
AUTHOR Sanz-Fraile, Hector and Amorós, Susana and Mendizabal, Irene Isabel and Gálvez-Montón, Carolina and Prat-Vidal, Cristina and Bayés-Genís, Antoni and Navajas, Daniel and Farre, Ramon and Otero, Jorge
Title Silk-reinforced Collagen Hydrogels with Raised Multiscale Stiffness for Mesenchymal Cells 3D Culture [Abstract]
Year 2020
Journal/Proceedings Tissue Engineering Part A
Reftype
DOI/URL DOI
Abstract
Type I collagen hydrogels are of high interest in tissue engineering. With the evolution of 3D bioprinting technologies, a high number of collagen-based scaffolds have been reported for the development of 3D cell cultures. A recent proposal was to mix collagen with silk fibroin derived from Bombyx Mori silkworm. Nevertheless, due to the difficulties in the preparation and the characteristics of the protein, several problems like phase separation and collagen denaturation appears during the procedure. Therefore, the common solution is to diminish the concentration of collagen although in that way the most biologically relevant component is reduced. In the present work, we present a new, simple and effective method to develop a collagen-silk hybrid hydrogel with high collagen concentration and with increased stiffness approaching that of natural tissues, which could be of high interest for the development of cardiac patches for myocardial regeneration and for preconditioning of mesenchymal stem cells to improve their therapeutic potential. Sericin in the silk was preserved by using a physical solubilizing procedure which results in a preserved fibrous structure of type I collagen, as shown by ultrastructural imaging. The macro- and micromechanical properties of the hybrid hydrogels measured by tensile stretch and Atomic Force Microscopy respectively, showed a more than two-fold stiffening as compared with collagen-only hydrogels. Rheological measurements showed improved printability properties for the developed biomaterial. The suitability of the hydrogels for 3D cell culture was assessed by 3D bioprinting bone marrow-derived mesenchymal stem cells cultured within the scaffolds. The result was a biomaterial with improved printability characteristics that better resembled the mechanical properties of natural soft tissues while preserving biocompatibility owing to the high concentration of collagen.
AUTHOR Li, Huijun and Tan, Yu Jun and Kiran, Raj and Tor, Shu Beng and Zhou, Kun
Title Submerged and non-submerged 3D bioprinting approaches for the fabrication of complex structures with the hydrogel pair GelMA and alginate/methylcellulose [Abstract]
Year 2020
Journal/Proceedings Additive Manufacturing
Reftype
DOI/URL URL DOI
Abstract
The extrusion-based bioprinting of hydrogels such as gelatin methacrylate (GelMA) into structures with complex shape suffers from poor printability due to their low viscosity. The present study deals with hydrogel materials by using the mixture of cell-laden photopolymerizable GelMA as a main printing material and the mixture of alginate and methylcellulose (Alg/MC) as a support material because of its high viscosity and good thixotropic property. One extrusion-based approach is developed by printing the two mixtures into structures in an alternating layer-by-layer manner, with the electrostatic interactions between polycationic GelMA and polyanionic Alg/MC contributing to the integrity of the structures. The final printed structures are exposed to ultraviolet (UV) light to form crosslinks in GelMA through photopolymerization for further structural strengthening. The one-time UV exposure minimizes cell damage in cell-GelMA, demonstrating an advantage over those in previously reported studies that required repeated UV exposures upon the printing of each layer of a structure. The other approach is developed by submerging the extrusion nozzle into a bath of Alg/MC to print cell-laden GelMA structures, which, upon printing completion, are also subject to one-time UV exposure before the removal of the support material Alg/MC. A flower with living cells is printed to demonstrate the capability of the second approach of fabricating structures with geometric complexity. The structures printed using both approaches demonstrate a well-maintained shape fidelity, structural integrity and cell viability of over 93% up to five culturing days. The proposed two printing approaches based on the cell-GelMA and Alg/MC pair will be beneficial for exploring new opportunities in bioprinting.
AUTHOR Prasopthum, Aruna and Deng, Zexing and Khan, Ilyas M. and Yin, Zhanhai and Guo, Baolin and Yang, Jing
Title Three dimensional printed degradable and conductive polymer scaffolds promote chondrogenic differentiation of chondroprogenitor cells [Abstract]
Year 2020
Journal/Proceedings Biomaterials Science
Reftype
DOI/URL DOI
Abstract
Conductive polymers have been used for various biomedical applications including biosensors{,} tissue engineering and regenerative medicine. However{,} the poor processability and brittleness of these polymers hinder the fabrication of three-dimensional structures with desirable geometries. Moreover{,} their application in tissue engineering and regenerative medicine has been so far limited to excitable cells such as neurons and muscle cells. To enable their wider adoption in tissue engineering and regenerative medicine{,} new materials and formulations that overcome current limitations are required. Herein{,} a biodegradable conductive block copolymer{,} tetraaniline-b-polycaprolactone-b-tetraaniline (TPT){,} is synthesised and 3D printed for the first time into porous scaffolds with defined geometries. Inks are formulated by combining TPT with PCL in solutions which are then directly 3D printed to generate porous scaffolds. TPT and PCL are both biodegradable. The combination of TPT with PCL increases the flexibility of the hybrid material compared to pure TPT{,} which is critical for applications that need mechanical robustness of the scaffolds. The highest TPT content shows the lowest tensile failure strain. Moreover{,} the absorption of a cell adhesion-promoting protein (fibronectin) and chondrogenic differentiation of chondroprogenitor cells are found to be dependent on the amount of TPT in the blends. Higher content of TPT in the blends increases both fibronectin adsorption and chondrogenic differentiation{,} though the highest concentration of TPT in the blends is limited by its solubility in the ink. Despite the contradicting effects of TPT concentration on flexibility and chondrogenic differentiation{,} a concentration that strikes a balance between the two factors is still available. It is worth noting that the effect on chondrogenic differentiation is found in scaffolds without external electric stimulation. Our work demonstrates the possibility of 3D printing flexible conductive and biodegradable scaffolds and their potential use in cartilage tissue regeneration{,} and opens up future opportunities in using electric stimulation to control chondrogenesis in these scaffolds.
AUTHOR Zhang, Xihui and Jiang, Tianyan and Chen, Dandan and Wang, Qi and Zhang, Leshuai W.
Title Three-dimensional liver models: state of the art and their application for hepatotoxicity evaluation [Abstract]
Year 2020
Journal/Proceedings Critical Reviews in Toxicology
Reftype
DOI/URL DOI
Abstract
AbstractWhile alternative methods for toxicity testing using re-constructed human skin and cornea have been written into guidelines and adopted by regulatory authorities, three-dimensional (3D) liver models are currently applied in the industrial settings for hepatotoxicity screening and prediction. These 3D liver models can recapitulate the architecture, functionality and toxicity response of the native liver, demonstrated by a set of related hallmarks. In this comprehensive review, non-scaffold and scaffold-based methods available for 3D liver model formation are introduced, with an emphasis on their advantages and drawbacks. We then focus on the characteristics of primary human hepatocytes, stem cell derived hepatocyte like cells, and immortalized hepatic cell lines as cell resources for model reconstruction. Primary hepatocytes are generally regarded to be superior to other cell types due to their comparable metabolic profiles to the native liver. Additionally, the application of 3D liver models (mostly liver spheroids) on the evaluation of drug induced liver injury and chronic liver diseases (steatosis, cirrhosis, cholestasis), as well as the potential of nanomaterials to introduce hepatotoxicity are summarized. Finally, the global 3D cell market from 3D liver model manufacturing to the contract service of in vitro hepatotoxicity testing using the models is extensively explored. However, 3D liver models face cultural and regulatory barriers in different countries, and therefore the business development of 3D liver models is not easy. Toxicologists, material scientists, engineers should work together to develop, validate and apply 3D liver models for hepatotoxicity testing under the support from industrial organizations and governmental agencies.
AUTHOR Vyas, Cian and Ates, Gokhan and Aslan, Enes and Hart, Jack and Huang, Boyang and Bartolo, Paulo
Title Three-Dimensional Printing and Electrospinning Dual-Scale Polycaprolactone Scaffolds with Low-Density and Oriented Fibers to Promote Cell Alignment [Abstract]
Year 2020
Journal/Proceedings 3D Printing and Additive Manufacturing
Reftype
DOI/URL DOI
Abstract
Complex and hierarchically functionalized scaffolds composed of micro- and nanoscale structures are a key goal in tissue engineering. The combination of three-dimensional (3D) printing and electrospinning enables the fabrication of these multiscale structures. This study presents a polycaprolactone 3D-printed and electrospun scaffold with multiple mesh layers and fiber densities. The results show successful fabrication of a dual-scale scaffold with the 3D-printed scaffold acting as a gap collector with the printed microfibers as the electrodes and the pores a series of insulating gaps resulting in aligned nanofibers. The electrospun fibers are highly aligned perpendicular to the direction of the printed fiber and form aligned meshes within the pores of the scaffold. Mechanical testing showed no significant difference between the number of mesh layers whereas the hydrophobicity of the scaffold increased with increasing fiber density. Biological results indicate that increasing the number of mesh layers improves cell proliferation, migration, and adhesion. The aligned nanofibers within the microscale pores allowed enhanced cell bridging and cell alignment that was not observed in the 3D-printed only scaffold. These results demonstrate a facile method of incorporating low-density and aligned fibers within a 3D-printed scaffold that is a promising development in multiscale hierarchical scaffolds where alignment of cells can be desirable.
AUTHOR Schwab, Andrea and Helary, Christophe and Richards, Geoff and Alini, Mauro and Eglin, David and D{textquoteright}Este, Matteo
Title Tissue mimetic hyaluronan bio-ink containing oriented collagen fibers to modulate hMSC spreading and differentiation [Abstract]
Year 2020
Journal/Proceedings bioRxiv
Reftype
DOI/URL URL DOI
Abstract
Biofabrication is providing scientists and clinicians the ability to produce engineered tissues with desired shapes, chemical and biological gradients. Typical resolutions achieved with extrusion-based bioprinting are at the macroscopic level. However, for capturing the fibrillar nature of the extracellular matrix (ECM), it is necessary to arrange ECM components at smaller scales, down to the sub-micron and the molecular level.In this study, we introduce a (bio)ink containing hyaluronan (HA) as tyramine derivative (THA) and collagen (Col). Similarly to other connective tissues, in this (bio)ink Col is present in fibrillar form and HA as viscoelastic space filler. THA was enzymatically crosslinked under mild conditions allowing simultaneous Col fibrillogenesis, thus achieving a homogeneous distribution of Col fibrils within the viscoelastic HA-based matrix. THA-Col composite displayed synergistic properties in terms of storage modulus and shear-thinning, translating into good printability.Shear-induced alignment of the Col fibrils along the printing direction was achieved and quantified via immunofluorescence and second harmonic generation.Cell-free and cell-laden constructs were printed and characterized, analyzing the influence of the controlled microscopic anisotropy on cell behavior and chondrogenic differentiation.THA-Col showed cell instructive properties modulating hMSC adhesion, morphology and sprouting from spheroids stimulated by the presence and the orientation of Col fibers. Actin filament staining showed that hMSCs embedded into aligned constructs displayed increased cytoskeleton alignment along the fibril direction. Based on gene expression of cartilage/bone markers and matrix production, hMSCs embedded into the bioink displayed chondrogenic differentiation comparable or superior to standard pellet culture by means of proteoglycan production (Safranin O staining and proteoglycan quantification) as well as increase in cartilage related genes.The possibility of printing matrix components with control over microscopic alignment brings biofabrication one step closer to capturing the complexity of native tissues.
AUTHOR Nasim Golafshan and Elke Vorndran and Stefan Zaharievski and Harold Brommer and Firoz Babu Kadumudi and Alireza Dolatshahi-Pirouz and Uwe Gbureck and René {van Weeren} and Miguel Castilho and Jos Malda
Title Tough magnesium phosphate-based 3D-printed implants induce bone regeneration in an equine defect model [Abstract]
Year 2020
Journal/Proceedings Biomaterials
Reftype
DOI/URL URL DOI
Abstract
One of the important challenges in bone tissue engineering is the development of biodegradable bone substitutes with appropriate mechanical and biological properties for the treatment of larger defects and those with complex shapes. Recently, magnesium phosphate (MgP) doped with biologically active ions like strontium (Sr2+) have shown to significantly enhance bone formation when compared with the standard calcium phosphate-based ceramics. However, such materials can hardly be shaped into large and complex geometries and more importantly lack the adequate mechanical properties for the treatment of load-bearing bone defects. In this study, we have fabricated bone implants through extrusion assisted three-dimensional (3D) printing of MgP ceramics modified with Sr2+ ions (MgPSr) and a medical grade polycaprolactone (PCL) polymer phase. MgPSr with 30 wt% PCL (MgPSr-PCL30) allowed the printability of relevant size structures (>780 mm3) at room temperature with an interconnected macroporosity of approximately 40%. The printing resulted in implants with a compressive strength of 4.3 MPa, which were able to support up to 50 cycles of loading without plastic deformation. Notably, MgPSr-PCL30 scaffolds were able to promote in vitro bone formation in medium without the supplementation with osteo-inducing components. In addition, long-term in vivo performance of the 3D printed scaffolds was investigated in an equine tuber coxae model over 6 months. The micro-CT and histological analysis showed that implantation of MgPSr-PCL30 induced bone regeneration, while no bone formation was observed in the empty defects. Overall, the novel polymer modified MgP ceramic material and extrusion-based 3D printing process presented here greatly improved the shape ability and load bearing properties of MgP-based ceramics with simultaneously induction of new bone formation.
AUTHOR Shapira, Assaf and Noor, Nadav and Oved, Hadas and Dvir, Tal
Title Transparent support media for high resolution 3D printing of volumetric cell-containing ECM structures [Abstract]
Year 2020
Journal/Proceedings Biomedical Materials
Reftype
DOI/URL DOI
Abstract
3D bioprinting may revolutionize the field of tissue engineering by allowing fabrication of bio-structures with high degree of complexity, fine architecture and heterogeneous composition. The printing substances in these processes are mostly based on biomaterials and living cells. As such, they generally possess weak mechanical properties and thus must be supported during fabrication in order to prevent the collapse of large, volumetric multi-layered printouts. In this work, we characterize a uniquely formulated media used to support printing of extracellular matrix-based biomaterials. We show that a hybrid material, comprised of calcium-alginate nanoparticles and xanthan gum, presents superb qualities that enable printing at high resolution of down to 10 microns, allowing fabrication of complex constructs and cellular structures. This hybrid also presents an exclusive combination of desirable properties such as biocompatibility, high transparency, stability at a wide range of temperatures and amenability to delicate extraction procedures. Moreover, as fabrication of large, volumetric biological structures may require hours and even days to accomplish, we have demonstrated that the hybrid medium can support prolonged, precise printing for at least 18 hours. All these qualities make it a promising support medium for 3D printing of tissues and organs.
AUTHOR Döhler, Diana and Kang, Jiheong and Cooper, Chris Brittain and Tok, Jeffrey B.-H. and Rupp, Harald and Binder, Wolfgang H. and Bao, Zhenan
Title Tuning the Self-Healing Response of Poly(dimethylsiloxane)-Based Elastomers [Abstract]
Year 2020
Journal/Proceedings ACS Appl. Polym. Mater.
Reftype
DOI/URL DOI
Abstract
We present a comprehensive investigation of mechanical properties of supramolecular polymer networks with rationally developed multistrength hydrogen-bonding interactions. Self-healing poly(dimethylsiloxane) (PDMS)-based elastomers with varying elasticity, fracture toughness, and the ability to dissipate strain energy through the reversible breakage and re-formation of the supramolecular interactions were obtained. By changing the ratio between isophorone diisocyanate (IU), 4,4′-methylenebis(cyclohexyl isocyanate) (MCU), and 4,4′-methylenebis(phenyl isocyanate) (MPU) and by varying the molecular weight of the PDMS precursor, we obtained a library of poly(urea)s to study the interplay of mechanical performance and self-healability. The Young’s moduli of the presented materials ranged between 0.4 and 13 MPa and increased with decreasing molecular weight of the PDMS precursor and increasing content of MCU or MPU units related to the formation of stronger hydrogen-bonding interactions. By exchanging MPU against MCU units, we achieved an optimum balance between mechanical properties and self-healing performance, and by the additional reduction of the molecular weight of the precursor polymer, a minimum recovery of 80% in stress within 12 h at room temperature was observed. Selected poly(urea)s could be processed via 3D printing by the conventional extrusion method, obtaining dimensionally stable and freestanding objects. We present a comprehensive investigation of mechanical properties of supramolecular polymer networks with rationally developed multistrength hydrogen-bonding interactions. Self-healing poly(dimethylsiloxane) (PDMS)-based elastomers with varying elasticity, fracture toughness, and the ability to dissipate strain energy through the reversible breakage and re-formation of the supramolecular interactions were obtained. By changing the ratio between isophorone diisocyanate (IU), 4,4′-methylenebis(cyclohexyl isocyanate) (MCU), and 4,4′-methylenebis(phenyl isocyanate) (MPU) and by varying the molecular weight of the PDMS precursor, we obtained a library of poly(urea)s to study the interplay of mechanical performance and self-healability. The Young’s moduli of the presented materials ranged between 0.4 and 13 MPa and increased with decreasing molecular weight of the PDMS precursor and increasing content of MCU or MPU units related to the formation of stronger hydrogen-bonding interactions. By exchanging MPU against MCU units, we achieved an optimum balance between mechanical properties and self-healing performance, and by the additional reduction of the molecular weight of the precursor polymer, a minimum recovery of 80% in stress within 12 h at room temperature was observed. Selected poly(urea)s could be processed via 3D printing by the conventional extrusion method, obtaining dimensionally stable and freestanding objects.
AUTHOR Iordache, F. and Alexandru, D. and Pisoschi, A. M. and PoP, A.
Title 3D Bioprinting of Blood Vessel Model Using Collagen-Hyaluronic Acid Hydrogel [Abstract]
Year 2019
Journal/Proceedings AgroLife Scientific Journal
Reftype
DOI/URL URL
Abstract
3D bioprinting is a technology that supports fabrication of biomimetic tissues with complex architecture. It has application in drug discovery, tissue development, and regenerative medicine. The aim of this study was to create a blood vessel model correlating properties of collagen-hyaluronic acid hydrogel with bioprinter parameters such as speed rate, pressure, number of layers, nozzle diameter, and temperature. The blood vessel model was created using BioCAD software and bioprinted by extrusion technology using collagen-hyaluronic acid hydrogel. We analyzed the water uptake, enzymatic degradation and morphology by scanning electron microscopy and after staining with Hematoxylin and Eosin (H&E) and Trichromic Masson dyes. The results showed that the blood vessel constructs have 2.46 mm (±0.41) mean diameter, 1.4 mm (±0.10) mean thick wall, and 2.8 mm (±0.05) mean height which is appropriate with the model created in the BioCAD software. The optimal parameters for these constructs were: 1.1 bar pressure, 1mm/sec speed rate, 18°C temperature, 0.2 mm nozzle diameter, and 10 numbers of layers. Increasing hydrogel weight by 22% at 2 hours after immersion in PBS suggesting that is hydrophilic. Furthermore, decreasing by up to 47.2% in the presence of collagenase (50 μg/ml) shows that is biodegradable. H&E and Trichromic Masson staining showed that collagen-hyaluronic acid hydrogel organized in a network with pores dimension that could support cells growth and differentiation. In conclusion, our scaffold mimics the blood vessel structure, further experiment will be addressed for study the biocompatibility of these scaffold with mesenchymal stem cells.
AUTHOR Li, J. and Liu, X. and Crook, J. M. and Wallace, G. G.
Title 3D graphene-containing structures for tissue engineering [Abstract]
Year 2019
Journal/Proceedings Materials Today Chemistry
Reftype
DOI/URL URL DOI
Abstract
Graphene and its derivatives have been extensively explored in various fields and have shown great promise toward energy harvesting, environmental protection, and health care. 3D graphene-containing structures (3DGCSs) are especially endowed with useable features relating to physicochemical properties within the hierarchical architectures. Thus, 3DGCSs are increasingly being applied for tissue engineering because of their supportability of human cells and functionalization potential. This review focuses on recent progress in tissue engineering utilizing 3DGCSs, providing insights into fabrication, application, and constraints in bionic research.
AUTHOR Alison, Lauriane and Menasce, Stefano and Bouville, Florian and Tervoort, Elena and Mattich, Iacopo and Ofner, Alessandro and Studart, André R.
Title 3D printing of sacrificial templates into hierarchical porous materials [Abstract]
Year 2019
Journal/Proceedings Scientific Reports
Reftype Alison2019
DOI/URL DOI
Abstract
Hierarchical porous materials are widespread in nature and find an increasing number of applications as catalytic supports, biological scaffolds and lightweight structures. Recent advances in additive manufacturing and 3D printing technologies have enabled the digital fabrication of porous materials in the form of lattices, cellular structures and foams across multiple length scales. However, current approaches do not allow for the fast manufacturing of bulk porous materials featuring pore sizes that span broadly from macroscopic dimensions down to the nanoscale. Here, ink formulations are designed and investigated to enable 3D printing of hierarchical materials displaying porosity at the nano-, micro- and macroscales. Pores are generated upon removal of nanodroplets and microscale templates present in the initial ink. Using particles to stabilize the droplet templates is key to obtain Pickering nanoemulsions that can be 3D printed through direct ink writing. The combination of such self-assembled templates with the spatial control offered by the printing process allows for the digital manufacturing of hierarchical materials exhibiting thus far inaccessible multiscale porosity and complex geometries.
AUTHOR Rupp, Harald and Döhler, Diana and Hilgeroth, Philipp and Mahmood, Nasir and Beiner, Mario and Binder, Wolfgang H.
Title 3D Printing of Supramolecular Polymers: Impact of Nanoparticles and Phase Separation on Printability [Abstract]
Year 2019
Journal/Proceedings Macromolecular Rapid Communications
Reftype
DOI/URL DOI
Abstract
Abstract 3D printing of linear and three-arm star supramolecular polymers with attached hydrogen bonds and their nanocomposites is reported. The concept is based on hydrogen-bonded supramolecular polymers, known to form nano-sized micellar clusters. Printability is based on reversible thermal- and shear-induced dissociation of a supramolecular polymer network, which generates stable and self-supported structures after printing, as checked via melt-rheology and X-ray scattering. The linear and three-arm star poly(isobutylene)s PIB-B2 (Mn = 8500 g mol −1), PIB-B3 (Mn = 16 000 g mol −1), and linear poly(ethylene glycol)s PEG-B2 (Mn = 900 g mol−1, 8500 g mol −1) are prepared and then probed by melt-rheology to adjust the viscosity to address the proper printing window. The supramolecular PIB polymers show a rubber-like behavior and are able to form self-supported 3D printed objects at room temperature and below, reaching polymer strand diameters down to 200–300 µm. Nanocomposites of PIB-B2 with silica nanoparticles (12 nm, 5–15 wt%) are generated, in turn leading to an improvement of their shape persistence. A blend of the linear polymer PIB-B2 and the three-arm star polymer PIB-B3 (ratio ≈ 3/1 mol) reaches an even higher structural stability, able to build free-standing structures.
AUTHOR Mehrotra, Shreya and Moses, Joseph Christakiran and Bandyopadhyay, Ashutosh and Mandal, Biman B.
Title 3D Printing/Bioprinting Based Tailoring of in Vitro Tissue Models: Recent Advances and Challenges [Abstract]
Year 2019
Journal/Proceedings ACS Applied Bio Materials
Reftype
DOI/URL DOI
Abstract
Prodigious progress in the past decade has pronounced 3D printing as one of the most promising technique for assembling biological materials in a complex layout that mimics native human tissues. With the advent of technology, several improvements in printing techniques have facilitated the development of intricate strategies and designs that were imaginably distant due to the conventional top-down approaches. Most of these advanced strategies generally follow a thorough coordination and an elaborate biomimetic blueprint due to which it is now possible to fabricate in vitro tissue models with ease. However, much remains to be accomplished at several forefronts for utilizing this technology to its full potential. With several printing strategies at the lead, it has now become essential to systematically analyze and learn from several endeavors such that shortcomings can be understood and future efforts can be made toward negating them. Taking account of all the recent tissue specific developments in this field, this review serves as a framework for bringing together in discussion several strategies and constraints in developing small scaled in vitro tissues. Highlighting the growing popularity of the organ and body on chip platforms and their easy scale up using 3D printing, latest advancements, and the challenges in this field are also discussed. Prodigious progress in the past decade has pronounced 3D printing as one of the most promising technique for assembling biological materials in a complex layout that mimics native human tissues. With the advent of technology, several improvements in printing techniques have facilitated the development of intricate strategies and designs that were imaginably distant due to the conventional top-down approaches. Most of these advanced strategies generally follow a thorough coordination and an elaborate biomimetic blueprint due to which it is now possible to fabricate in vitro tissue models with ease. However, much remains to be accomplished at several forefronts for utilizing this technology to its full potential. With several printing strategies at the lead, it has now become essential to systematically analyze and learn from several endeavors such that shortcomings can be understood and future efforts can be made toward negating them. Taking account of all the recent tissue specific developments in this field, this review serves as a framework for bringing together in discussion several strategies and constraints in developing small scaled in vitro tissues. Highlighting the growing popularity of the organ and body on chip platforms and their easy scale up using 3D printing, latest advancements, and the challenges in this field are also discussed.
AUTHOR Shen, Jie and Wang, Wenhao and Zhai, Xinyun and Chen, Bo and Qiao, Wei and Li, Wan and Li, Penghui and Zhao, Ying and Meng, Yuan and Qian, Shi and Liu, Xuanyong and Chu, Paul K. and Yeung, Kelvin W. K.
Title 3D-printed nanocomposite scaffolds with tunable magnesium ionic microenvironment induce in situ bone tissue regeneration [Abstract]
Year 2019
Journal/Proceedings Applied Materials Today
Reftype
DOI/URL URL DOI
Abstract
Local tissue microenvironment is able to regulate cell-to-cell interaction that leads to effective tissue repair. This study aims to demonstrate a tunable magnesium ionic (Mg2+) microenvironment in bony tissue that can significantly induce bone defect repair. The concept can be realized by using a newly fabricated nanocomposite comprising of custom-made copolymer polycaprolactone-co-poly(ethylene glycol)-co-polycaprolactone (PCL-PEG-PCL) and surface-modified magnesium oxide (MgO) nanoparticles. In this study, additive manufacturing (AM) technology had been adopted to help design the porous three-dimensional (3D) scaffolds with tunable Mg2+ microenvironment. We found that the wettability and printability of new copolymer had been improved as compared with that of PCL polymer. Additionally, when MgO nanoparticles incorporated into the newly synthesized hydrophilic copolymer matrix, it could lead to increased compressive moduli significantly. In the in vitro studies, the fabricated nanocomposite scaffold with low concentration of Mg2+ microenvironment not only demonstrated better cytocompatibility, but also remarkably enhanced osteogenic differentiation in vitro as compared with the pure PCL and PCL-PEG-PCL co-polymer controls. In the animal studies, we also found that superior and early bone formation and tissue mineralization could be observed in the same 3D printed scaffold. However, the nanocomposite scaffold with high concentration of Mg2+ jeopardized the in situ bony tissue regeneration capability due to excessive magnesium ions in bone tissue microenvironment. Lastly, this study demonstrates that the nanocomposite 3D scaffold with controlled magnesium concentration in bone tissue microenvironment can effectively promote bone defect repair.
AUTHOR Augurio, Adriana and Cortelletti, Paolo and Tognato, Riccardo and Rios, Anne and Levato, Riccardo and Malda, Jos and Alini, Mauro and Eglin, David and Giancane, Gabriele and Speghini, Adolfo and Serra, Tiziano
Title A Multifunctional Nanocomposite Hydrogel for Endoscopic Tracking and Manipulation [Abstract]
Year 2019
Journal/Proceedings Advanced Intelligent Systems
Reftype
DOI/URL DOI
Abstract
In this work, the fabrication of multi-responsive and hierarchically organized nanomaterial by using core-shell SrF2 upconverting nanoparticles, doped with Yb3+, Tm3+, Nd3+ incorporated into gelatin methacryloyl matrix, is reported. Upon 800 nm excitation, deep monitoring of 3D printed constructs is demonstrated. Addition of magnetic self-assembly of iron oxide nanoparticles within the hydrogel provides anisotropic structuration from the nano- to the macro-scale and magnetic responsiveness permitting remote manipulation. The present study provides a new strategy for the fabrication of a novel highly organized multi-responsive material using additive manufacturing, which could have important implications in biomedicine. This article is protected by copyright. All rights reserved.
AUTHOR Kjar, Andrew and Huang, Yu
Title Application of Micro-Scale 3D Printing in Pharmaceutics [Abstract]
Year 2019
Journal/Proceedings Pharmaceutics
Reftype
DOI/URL URL DOI
Abstract
3D printing, as one of the most rapidly-evolving fabrication technologies, has released a cascade of innovation in the last two decades. In the pharmaceutical field, the integration of 3D printing technology has offered unique advantages, especially at the micro-scale. When printed at a micro-scale, materials and devices can provide nuanced solutions to controlled release, minimally invasive delivery, high-precision targeting, biomimetic models for drug discovery and development, and future opportunities for personalized medicine. This review aims to cover the recent advances in this area. First, the 3D printing techniques are introduced with respect to the technical parameters and features that are uniquely related to each stage of pharmaceutical development. Then specific micro-sized pharmaceutical applications of 3D printing are summarized and grouped according to the provided benefits. Both advantages and challenges are discussed for each application. We believe that these technologies provide compelling future solutions for modern medicine, while challenges remain for scale-up and regulatory approval.
AUTHOR Wang, Weiguang and Huang, Boyang and Byun, Jae Jong and Bártolo, Paulo
Title Assessment of PCL/carbon material scaffolds for bone regeneration [Abstract]
Year 2019
Journal/Proceedings Journal of the Mechanical Behavior of Biomedical Materials
Reftype
DOI/URL URL DOI
Abstract
Biomanufacturing is a relatively new research domain focusing on the use of additive manufacturing technologies, biomaterials, cells and biomolecular signals to produce tissue constructs for tissue engineering. For bone regeneration, researchers are focusing on the use of polymeric and polymer/ceramic scaffolds seeded with osteoblasts or mesenchymal stem cells. However, the design of high-performance scaffolds in terms of mechanical, cell-stimulation and biological performance is still required. This is the first paper investigating the use of an extrusion additive manufacturing system to produce poly(ε-caprolactone) (PCL), PCL/graphene nanosheet (GNS) and PCL/carbon nanotube (CNT) scaffolds for bone applications. Scaffolds with regular and reproducible architecture were produced and evaluated from chemical, physical and biological points of view. Results suggest that the addition of both graphene and CNT allow the fabrication of scaffolds with improved properties. It also shows that scaffolds containing graphene present better mechanical properties and high cell-affinity improving cell attachment, proliferation and differentiation.
AUTHOR Freeman, F. E. and Browe, D. C. and Nulty, J. and Von Euw, S. and Grayson, W. L. and Kelly, D. J.
Title Biofabrication of multiscale bone extracellular matrix scaffolds for bone tissue engineering. [Abstract]
Year 2019
Journal/Proceedings European Cells and Materials Journal
Reftype
DOI/URL URL DOI
Abstract
Interconnected porosity is critical to the design of regenerative scaffolds, as it permits cell migration, vascularisation and diffusion of nutrients and regulatory molecules inside the scaffold. 3D printing is a promising strategy to achieve this as it allows the control over scaffold pore size, porosity and interconnectivity. Thus, the aim of the present study was to integrate distinct biofabrication strategies to develop a multiscale porous scaffold that was not only mechanically functional at the time of implantation, but also facilitated rapid vascularisation and provided stem cells with appropriate cues to enable their differentiation into osteoblasts. To achieve this, polycaprolactone (PCL) was functionalised with decellularised bone extracellular matrix (ECM), to produce osteoinductive filaments for 3D printing. The addition of bone ECM to the PCL not only increased the mechanical properties of the resulting scaffold, but also increased cellular attachment and enhanced osteogenesis of mesenchymal stem cells (MSCs). In vivo, scaffold pore size determined the level of vascularisation, with a larger filament spacing supporting faster vessel in-growth and more new bone formation. By freeze-drying solubilised bone ECM within these 3D-printed scaffolds, it was possible to introduce a matrix network with microscale porosity that further enhanced cellular attachment in vitro and increased vessel infiltration and overall levels of new bone formation in vivo. To conclude, an "off-the-shelf" multiscale bone-ECM-derived scaffold was developed that was mechanically stable and, once implanted in vivo, will drive vascularisation and, ultimately, lead to bone regeneration.
AUTHOR Cernencu, Alexandra I. and Lungu, Adriana and Stancu, Izabela-Cristina and Serafim, Andrada and Heggset, Ellinor and Syverud, Kristin and Iovu, Horia
Title Bioinspired 3D printable pectin-nanocellulose ink formulations [Abstract]
Year 2019
Journal/Proceedings Carbohydrate Polymers
Reftype
DOI/URL URL DOI
Abstract
The assessment of several ink formulations for 3D printing based on two natural macromolecular compounds is presented. In the current research we have exploited the fast crosslinking potential of pectin and the remarkable shear-thinning properties of carboxylated cellulose nanofibrils, which is known to induce a desired viscoelastic behavior. Prior to 3D printing, the viscoelastic properties of the polysaccharide inks were evaluated by rheological measurements and injectability tests. The reliance of the printing parameters on the ink composition was established through one-dimensional lines printing, the base units of 3D-structures. The performance of the 3D-printed structures after ionic cross-linking was evaluated in terms of mechanical properties and rehydration behavior. MicroCT was also used to evaluate the morphology of the 3D-printed objects regarding the effect of pectin/nanocellulose ratio on the geometrical features of scaffolds. The proportionality between the two polymers proved to be the determining factor for the firmness and strength of the printed objects.
AUTHOR Yilmaz, B. and Tahmasebifar, A. and Baran, E. T.
Title Bioprinting Technologies in Tissue Engineering
Year 2019
Journal/Proceedings Advances in Biochemical Engineering/Biotechnology
Reftype
DOI/URL DOI
AUTHOR Creusen, Guido and Roshanasan, Ardeshir and Garcia Lopez, Javier and Peneva, Kalina and Walther, Andreas
Title Bottom-up design of model network elastomers and hydrogels from precise star polymers [Abstract]
Year 2019
Journal/Proceedings Polymer Chemistry
Reftype
DOI/URL DOI
Abstract
We introduce a platform for the simultaneous design of model network hydrogels and bulk elastomers based on well-defined water-soluble star polymers with a low glass transition temperature (Tg). This platform is enabled via the development of a synthetic route to a new family of 4-arm star polymers based on water-soluble poly(triethylene glycol methyl ether acrylate) (p(mTEGA)){,} which after quantitative introduction of functional end-groups can serve as suitable building blocks for model network formation. We first describe in detail the synthesis of highly defined star polymers using light and Cu-wire mediated Cu-based reversible deactivation radical polymerization. The resulting polymers exhibit narrow dispersities and controlled arm length at very high molecular weights{,} and feature a desirable low Tg of −55 °C. Subsequently{,} we elucidate the rational design of the stiffness and elasticity in covalent model network elastomers and hydrogels formed by fast photo-crosslinking for different arm lengths{,} and construct thermally reversible model network hydrogels based on dynamic supramolecular bonds. In addition{,} we describe preliminary 3D-printing applications. This work provides a key alternative to commonly used star-poly(ethylene glycol) (PEG) for model hydrogel networks{,} and demonstrates access to new main and side chain chemistries{,} thus chain stiffnesses and entanglement molecular weight{,} and{,} critically{,} enables the simultaneous study of the mechanical behavior of bulk network elastomers and swollen hydrogels with the same network topology. In a wider perspective{,} this work also highlights the need for advancing precision polymer chemistry to allow for an understanding of architectural control for the rational design of functional mechanical network materials.
AUTHOR Valot, Laurine and Martinez, Jean and Mehdi, Ahmad and Subra, Gilles
Title Chemical insights into bioinks for 3D printing [Abstract]
Year 2019
Journal/Proceedings Chemical Society Reviews
Reftype
DOI/URL DOI
Abstract
3D printing has triggered the acceleration of numerous research areas in health sciences{,} which traditionally used cells as starting materials{,} in particular tissue engineering{,} regenerative medicine and also in the design of more relevant bioassays for drug discovery and development. While cells can be successfully printed in 2D layers without the help of any supporting biomaterial{,} the obtainment of more complex 3D architectures requires a specific bioink{,} i.e. a material in which the cells are embedded during and after the printing process helping to support them while they are arranged in superimposed layers. The bioink plays a critical role in bioprinting: first{,} it must be adapted to the 3D printing technology; then{,} it must fulfil the physicochemical and mechanical characteristics of the target construct (e.g. stiffness{,} elasticity{,} robustness{,} transparency); finally it should guarantee cell viability and eventually induce a desired behaviour. This review focuses on the nature of bioink components of natural or synthetic origin{,} and highlights the chemistry required for the establishment of the 3D network in conditions compatible with the selected 3D printing technique and cell survival.
AUTHOR Loai, Sadi and Kingston, Benjamin R. and Wang, Zongjie and Philpott, David N. and Tao, Mingyang and Cheng, Hai-Ling Margaret
Title Clinical Perspectives on 3D Bioprinting Paradigms for Regenerative Medicine
Year 2019
Journal/Proceedings Regenerative Medicine Frontiers
Reftype
DOI/URL URL DOI
AUTHOR Marques, C. F. and Diogo, G. S. and Pina, S. and Oliveira, J. M. and Silva, T. H. and Reis, R. L.
Title Collagen-based bioinks for hard tissue engineering applications: a comprehensive review [Abstract]
Year 2019
Journal/Proceedings Journal of Materials Science: Materials in Medicine
Reftype
DOI/URL DOI
Abstract
In the last few years, additive manufacturing (AM) has been gaining great interest in the fabrication of complex structures for soft-to-hard tissues regeneration, with tailored porosity, and boosted structural, mechanical, and biological properties. 3D printing is one of the most known AM techniques in the field of biofabrication of tissues and organs. This technique opened up opportunities over the conventional ones, with the capability of creating replicable, customized, and functional structures that can ultimately promote effectively different tissues regeneration. The uppermost component of 3D printing is the bioink, i.e. a mixture of biomaterials that can also been laden with different cell types, and bioactive molecules. Important factors of the fabrication process include printing fidelity, stability, time, shear-thinning properties, mechanical strength and elasticity, as well as cell encapsulation and cell-compatible conditions. Collagen-based materials have been recognized as a promising choice to accomplish an ideal mimetic bioink for regeneration of several tissues with high cell-activating properties. This review presents the state-of-art of the current achievements on 3D printing using collagen-based materials for hard tissue engineering, particularly on the development of scaffolds for bone and cartilage repair/regeneration. The ultimate aim is to shed light on the requirements to successfully print collagen-based inks and the most relevant properties exhibited by the so fabricated scaffolds. In this regard, the adequate bioprinting parameters are addressed, as well as the main materials properties, namely physicochemical and mechanical properties, cell compatibility and commercial availability, covering hydrogels, microcarriers and decellularized matrix components. Furthermore, the fabrication of these bioinks with and without cells used in inkjet printing, laser-assisted printing, and direct in writing technologies are also overviewed. Finally, some future perspectives of novel bioinks are given.
AUTHOR Marchiori, Gregorio and Berni, Matteo and Boi, Marco and Petretta, Mauro and Grigolo, Brunella and Bellucci, Devis and Cannillo, Valeria and Garavelli, Chiara and Bianchi, Michele
Title Design of a novel procedure for the optimization of the mechanical performances of 3D printed scaffolds for bone tissue engineering combining CAD, Taguchi method and FEA [Abstract]
Year 2019
Journal/Proceedings Medical Engineering and Physics
Reftype
DOI/URL URL DOI
Abstract
In order to increase manufacturing and experimental efficiency, a certain degree of control over design performances before realization phase is recommended. In this context, this paper presents an integrated procedure to design 3D scaffolds for bone tissue engineering. The procedure required a combination of Computer Aided Design (CAD), Finite Element Analysis (FEA), and Design methodologies Of Experiments (DOE), firstly to understand the influence of the design parameters, and then to control them. Based on inputs from the literature and limitations imposed by the chosen manufacturing process (Precision Extrusion Deposition), 36 scaffold architectures have been drawn. The porosity of each scaffold has been calculated with CAD. Thereafter, a generic scaffold material was considered and its variable parameters were combined with the geometrical ones according to the Taguchi method, i.e. a DOE method. The compressive response of those principal combinations was simulated by FEA, and the influence of each design parameter on the scaffold compressive behaviour was clarified. Finally, a regression model was obtained correlating the scaffold's mechanical performances to its geometrical and material parameters. This model has been applied to a novel composite material made of polycaprolactone and innovative bioactive glass. By setting specific porosity (50%) and stiffness (0.05 GPa) suitable for trabecular bone substitutes, the model selected 4 of the 36 initial scaffold architectures. Only these 4 more promising geometries will be realized and physically tested for advanced indications on compressive strength and biocompatibility.
AUTHOR Cofiño, Carla and Perez-Amodio, Soledad and Semino, Carlos E. and Engel, Elisabeth and Mateos-Timoneda, Miguel A.
Title Development of a Self-Assembled Peptide/Methylcellulose-Based Bioink for 3D Bioprinting [Abstract]
Year 2019
Journal/Proceedings Macromolecular Materials and Engineering
Reftype
DOI/URL DOI
Abstract
Abstract The introduction of 3D bioprinting to fabricate living constructs with tailored architecture has provided a new paradigm for biofabrication, with the potential to overcome several drawbacks of conventional scaffold-based tissue regeneration strategies. Hydrogel-based materials are suitable candidates regarding cell biocompatibility but often display poor mechanical properties. Self-assembling peptides are a promising source of biomaterials to be used as 3D scaffolds based on their similarity to extracellular matrices (structurally and mechanically). In this study, an advanced bioink for biofabrication is presented based on the optimization of a RAD16-I-based biomaterial. The strategy followed to build 3D predefined structures by 3D printing is based on an enhancement of bioink viscosity by adding methylcellulose (MC) to a RAD16-I solution. The resultant constructs display high shape fidelity and stability and embedded human mesenchymal stem cells present high viability after 7 days of culture. Moreover, cells are also able to differentiate to the adipogenic lineage, suggesting the suitability of this novel biomaterial for soft tissue engineering applications.
AUTHOR Athanasiadis, Markos and Pak, Anna and Afanasenkau, Dzmitry and Minev, Ivan R.
Title Direct Writing of Elastic Fibers with Optical, Electrical, and Microfluidic Functionality [Abstract]
Year 2019
Journal/Proceedings Advanced Materials Technologies
Reftype
DOI/URL DOI
Abstract
Abstract Direct Ink Writing is an additive fabrication technology that allows the integration of a diverse range of functional materials into soft and bioinspired devices such as robots and human-machine interfaces. Typically, a viscoelastic ink is extruded from a nozzle as a continuous filament of circular cross section. Here it is shown that a careful selection of printing parameters such as nozzle height and speed can produce filaments with a range of cross-sectional geometries. Thus, elliptic cylinder-, ribbon-, or groove-shaped filaments can be printed. By using the nozzle as a stylus for postprint filament modification, even filaments with an embedded microfluidic channel can be produced. This strategy is applied to directly write freeform and elastic optical fibers, electrical interconnects, and microfluidics. The integration of these components into simple sensor-actuator systems is demonstrated. Prototypes of an optical fiber with steerable tip and a thermal actuation system for soft tissues are presented.
AUTHOR Wang, Weiguang and Junior, José Roberto Passarini and Nalesso, Paulo Roberto Lopes and Musson, David and Cornish, Jillian and Mendonça, Fernanda and Caetano, Guilherme Ferreira and Bártolo, Paulo
Title Engineered 3D printed poly(ɛ-caprolactone)/graphene scaffolds for bone tissue engineering [Abstract]
Year 2019
Journal/Proceedings Materials Science and Engineering: C
Reftype
DOI/URL URL DOI
Abstract
Scaffolds are important physical substrates for cell attachment, proliferation and differentiation. Multiple factors could influence the optimal design of scaffolds for a specific tissue, such as the geometry, the materials used to modulate cell proliferation and differentiation, its biodegradability and biocompatibility. The optimal design of a scaffold for a specific tissue strongly depends on both materials and manufacturing processes. Previous studies of human adipose-derived stem cells (hADSCs) seeded on poly(ε-caprolactone) (PCL)/graphene scaffolds have proved that the addition of small concentrations of graphene to PCL scaffolds improves cell proliferation. Based on such results, this paper further investigates, for the first time, both in vitro and in vivo characteristics of 3D printed PCL/graphene scaffolds. Scaffolds were evaluated from morphological, biological and short term immune response points of view. Results show that the produced scaffolds induce an acceptable level of immune response, suggesting high potential for in vivo applications. Finally, the scaffolds were used to treat a rat calvaria critical size defect with and without applying micro electrical stimulation (10 μA). Quantification of connective and new bone tissue formation and the levels of ALP, RANK, RANKL, OPG were considered. Results show that the use of scaffolds containing graphene and electrical stimulation seems to increase cell migration and cell influx, leading to new tissue formation, well-organized tissue deposition and bone remodelling.
AUTHOR Angelopoulos, Ioannis and Allenby, Mark C. and Lim, Mayasari and Zamorano, Mauricio
Title Engineering inkjet bioprinting processes toward translational therapies [Abstract]
Year 2019
Journal/Proceedings Biotechnology and Bioengineering
Reftype
DOI/URL DOI
Abstract
Abstract Bioprinting is the assembly of three-dimensional (3D) tissue constructs by layering cell-laden biomaterials using additive manufacturing techniques, offering great potential for tissue engineering and regenerative medicine. Such a process can be performed with high resolution and control by personalized or commercially available inkjet printers. However, bioprinting's clinical translation is significantly limited due to process engineering challenges. Upstream challenges include synthesis, cellular incorporation, and functionalization of “bioinks,” and extrusion of print geometries. Downstream challenges address sterilization, culture, implantation, and degradation. In the long run, bioinks must provide a microenvironment to support cell growth, development, and maturation and must interact and integrate with the surrounding tissues after implantation. Additionally, a robust, scaleable manufacturing process must pass regulatory scrutiny from regulatory bodies such as U.S. Food and Drug Administration, European Medicines Agency, or Australian Therapeutic Goods Administration for bioprinting to have a real clinical impact. In this review, recent advances in inkjet-based 3D bioprinting will be presented, emphasizing on biomaterials available, their properties, and the process to generate bioprinted constructs with application in medicine. Current challenges and the future path of bioprinting and bioinks will be addressed, with emphasis in mass production aspects and the regulatory framework bioink-based products must comply to translate this technology from the bench to the clinic.
AUTHOR Jiang, Tao and Munguía López, Jose and Flores-Torres, Salvador and Kort-Mascort, Jacqueline and Kinsella, Joseph
Title Extrusion bioprinting of soft materials: An emerging technique for biological model fabrication
Year 2019
Journal/Proceedings Applied Physics Reviews
Reftype
DOI/URL DOI
AUTHOR Huang, Boyang and Vyas, Cian and Roberts, Iwan and Poutrel, Quentin-Arthur and Chiang, Wei-Hung and Blaker, Jonny J. and Huang, Zhucheng and Bártolo, Paulo
Title Fabrication and characterisation of 3D printed MWCNT composite porous scaffolds for bone regeneration [Abstract]
Year 2019
Journal/Proceedings Materials Science and Engineering: C
Reftype
DOI/URL URL DOI
Abstract
Carbon nanotubes (CNTs) with exceptional physical and chemical properties are attracting significant interest in the field of tissue engineering. Several reports investigated CNTs biocompatibility and their impact in terms of cell attachment, proliferation and differentiation mainly using polymer/CNTs membranes. However, these 2D membranes are not able to emulate the complex in vivo environment. In this paper, additive manufacturing (3D printing) is used to create composite 3D porous scaffolds containing different loadings of multi-walled carbon nanotubes (MWCNT) (0.25, 0.75 and 3 wt%) for bone tissue regeneration. Pre-processed and processed materials were extensively characterised in terms of printability, morphological and topographic characteristics and thermal, mechanical and biological properties. Scaffolds with pore sizes ranging between 366 μm and 397 μm were successfully produced and able to sustain early-stage human adipose-derived mesenchymal stem cells attachment and proliferation. Results show that MWCNTs enhances protein adsorption, mechanical and biological properties. Composite scaffolds, particularly the 3 wt% loading of MWCNTs, seem to be good candidates for bone tissue regeneration.
AUTHOR Rathan, Swetha and Dejob, Léa and Schipani, Rossana and Haffner, Benjamin and Möbius, Matthias E. and Kelly, Daniel J.
Title Fiber Reinforced Cartilage ECM Functionalized Bioinks for Functional Cartilage Tissue Engineering [Abstract]
Year 2019
Journal/Proceedings Advanced Healthcare Materials
Reftype
DOI/URL DOI
Abstract
Abstract Focal articular cartilage (AC) defects, if left untreated, can lead to debilitating diseases such as osteoarthritis. While several tissue engineering strategies have been developed to promote cartilage regeneration, it is still challenging to generate functional AC capable of sustaining high load-bearing environments. Here, a new class of cartilage extracellular matrix (cECM)-functionalized alginate bioink is developed for the bioprinting of cartilaginous tissues. The bioinks are 3D-printable, support mesenchymal stem cell (MSC) viability postprinting and robust chondrogenesis in vitro, with the highest levels of COLLII and ACAN expression observed in bioinks containing the highest concentration of cECM. Enhanced chondrogenesis in cECM-functionalized bioinks is also associated with progression along an endochondral-like pathway, as evident by increases in RUNX2 expression and calcium deposition in vitro. The bioinks loaded with MSCs and TGF-β3 are also found capable of supporting robust chondrogenesis, opening the possibility of using such bioinks for direct “print-and-implant” cartilage repair strategies. Finally, it is demonstrated that networks of 3D-printed polycaprolactone fibers with compressive modulus comparable to native AC can be used to mechanically reinforce these bioinks, with no loss in cell viability. It is envisioned that combinations of such biomaterials can be used in multiple-tool biofabrication strategies for the bioprinting of biomimetic cartilaginous implants.
AUTHOR Mestre, Rafael and Patiño, Tania and Barceló, Xavier and Anand, Shivesh and Pérez-Jiménez, Ariadna and Sánchez, Samuel
Title Force Modulation and Adaptability of 3D-Bioprinted Biological Actuators Based on Skeletal Muscle Tissue [Abstract]
Year 2019
Journal/Proceedings Advanced Materials Technologies
Reftype
DOI/URL DOI
Abstract
Abstract The integration of biological systems into robotic devices might provide them with capabilities acquired from natural systems and significantly boost their performance. These abilities include real-time bio-sensing, self-organization, adaptability, or self-healing. As many muscle-based bio-hybrid robots and bio-actuators arise in the literature, the question of whether these features can live up to their expectations becomes increasingly substantial. Herein, the force generation and adaptability of skeletal-muscle-based bio-actuators undergoing long-term training protocols are analyzed. The 3D-bioprinting technique is used to fabricate bio-actuators that are functional, responsive, and have highly aligned myotubes. The bio-actuators are 3D-bioprinted together with two artificial posts, allowing to use it as a force measuring platform. In addition, the force output evolution and dynamic gene expression of the bio-actuators are studied to evaluate their degree of adaptability according to training protocols of different frequencies and mechanical stiffness, finding that their force generation could be modulated to different requirements. These results shed some light into the fundamental mechanisms behind the adaptability of muscle-based bio-actuators and highlight the potential of using 3D bioprinting as a rapid and cost-effective tool for the fabrication of custom-designed soft bio-robots.
AUTHOR Geetha Bai, Renu and Muthoosamy, Kasturi and Manickam, Sivakumar and Hilal-Alnaqbi, Ali
Title Graphene-based 3D scaffolds in tissue engineering: fabrication, applications, and future scope in liver tissue engineering [Abstract]
Year 2019
Journal/Proceedings International journal of nanomedicine
Reftype
DOI/URL URL
Abstract
Tissue engineering embraces the potential of recreating and replacing defective body parts by advancements in the medical field. Being a biocompatible nanomaterial with outstanding physical, chemical, optical, and biological properties, graphene-based materials were successfully employed in creating the perfect scaffold for a range of organs, starting from the skin through to the brain. Investigations on 2D and 3D tissue culture scaffolds incorporated with graphene or its derivatives have revealed the capability of this carbon material in mimicking in vivo environment. The porous morphology, great surface area, selective permeability of gases, excellent mechanical strength, good thermal and electrical conductivity, good optical properties, and biodegradability enable graphene materials to be the best component for scaffold engineering. Along with the apt microenvironment, this material was found to be efficient in differentiating stem cells into specific cell types. Furthermore, the scope of graphene nanomaterials in liver tissue engineering as a promising biomaterial is also discussed. This review critically looks into the unlimited potential of graphene-based nanomaterials in future tissue engineering and regenerative therapy.
AUTHOR Tondera, Christoph and Akbar, Teuku Fawzul and Thomas, Alvin Kuriakose and Lin, Weilin and Werner, Carsten and Busskamp, Volker and Zhang, Yixin and Minev, Ivan R.
Title Highly Conductive, Stretchable, and Cell-Adhesive Hydrogel by Nanoclay Doping [Abstract]
Year 2019
Journal/Proceedings Small
Reftype
DOI/URL DOI
Abstract
Abstract Electrically conductive materials that mimic physical and biological properties of tissues are urgently required for seamless brain–machine interfaces. Here, a multinetwork hydrogel combining electrical conductivity of 26 S m−1, stretchability of 800%, and tissue-like elastic modulus of 15 kPa with mimicry of the extracellular matrix is reported. Engineering this unique set of properties is enabled by a novel in-scaffold polymerization approach. Colloidal hydrogels of the nanoclay Laponite are employed as supports for the assembly of secondary polymer networks. Laponite dramatically increases the conductivity of in-scaffold polymerized poly(ethylene-3,4-diethoxy thiophene) in the absence of other dopants, while preserving excellent stretchability. The scaffold is coated with a layer containing adhesive peptide and polysaccharide dextran sulfate supporting the attachment, proliferation, and neuronal differentiation of human induced pluripotent stem cells directly on the surface of conductive hydrogels. Due to its compatibility with simple extrusion printing, this material promises to enable tissue-mimetic neurostimulating electrodes.
AUTHOR Apelgren, Peter and Karabulut, Erdem and Amoroso, Matteo and Mantas, Athanasios and Martínez Ávila, Héctor and Kölby, Lars and Kondo, Tetsuo and Toriz, Guillermo and Gatenholm, Paul
Title In Vivo Human Cartilage Formation in Three-Dimensional Bioprinted Constructs with a Novel Bacterial Nanocellulose Bioink [Abstract]
Year 2019
Journal/Proceedings ACS Biomaterials Science & Engineering
Reftype
DOI/URL DOI
Abstract
Bacterial nanocellulose (BNC) is a 3D network of nanofibrils exhibiting excellent biocompatibility. Here, we present the aqueous counter collision (ACC) method of BNC disassembly to create bioink with suitable properties for cartilage-specific 3D-bioprinting. BNC was disentangled by ACC, and fibril characteristics were analyzed. Bioink printing fidelity and shear-thinning properties were evaluated. Cell-laden bioprinted grid constructs (5 × 5 × 1 mm3) containing human nasal chondrocytes (10 M mL-1) were implanted in nude mice and explanted after 30 and 60 days. Both ACC and hydrolysis resulted in significantly reduced fiber lengths, with ACC resulting in longer fibrils and fewer negative charges relative to hydrolysis. Moreover, ACC-BNC bioink showed outstanding printability, postprinting mechanical stability, and structural integrity. In vivo, cell-laden structures were rapidly integrated, maintained structural integrity, and showed chondrocyte proliferation, with 32.8 ± 13.8 cells per mm2 observed after 30 days and 85.6 ± 30.0 cells per mm2 at day 60 (p = 0.002). Furthermore, a full-thickness skin graft was attached and integrated completely on top of the 3D-bioprinted construct. The novel ACC disentanglement technique makes BNC biomaterial highly suitable for 3D-bioprinting and clinical translation, suggesting cell-laden 3D-bioprinted ACC-BNC as a promising solution for cartilage repair. Bacterial nanocellulose (BNC) is a 3D network of nanofibrils exhibiting excellent biocompatibility. Here, we present the aqueous counter collision (ACC) method of BNC disassembly to create bioink with suitable properties for cartilage-specific 3D-bioprinting. BNC was disentangled by ACC, and fibril characteristics were analyzed. Bioink printing fidelity and shear-thinning properties were evaluated. Cell-laden bioprinted grid constructs (5 × 5 × 1 mm3) containing human nasal chondrocytes (10 M mL-1) were implanted in nude mice and explanted after 30 and 60 days. Both ACC and hydrolysis resulted in significantly reduced fiber lengths, with ACC resulting in longer fibrils and fewer negative charges relative to hydrolysis. Moreover, ACC-BNC bioink showed outstanding printability, postprinting mechanical stability, and structural integrity. In vivo, cell-laden structures were rapidly integrated, maintained structural integrity, and showed chondrocyte proliferation, with 32.8 ± 13.8 cells per mm2 observed after 30 days and 85.6 ± 30.0 cells per mm2 at day 60 (p = 0.002). Furthermore, a full-thickness skin graft was attached and integrated completely on top of the 3D-bioprinted construct. The novel ACC disentanglement technique makes BNC biomaterial highly suitable for 3D-bioprinting and clinical translation, suggesting cell-laden 3D-bioprinted ACC-BNC as a promising solution for cartilage repair.
AUTHOR Schipani, Rossana and Nolan, David R. and Lally, Caitrίona and Kelly, Daniel J.
Title Integrating finite element modelling and 3D printing to engineer biomimetic polymeric scaffolds for tissue engineering [Abstract]
Year 2019
Journal/Proceedings Connective Tissue Research
Reftype
DOI/URL DOI
Abstract
ABSTRACTThe suitability of a scaffold for tissue engineering is determined by a number of interrelated factors. The biomaterial should be biocompatible and cell instructive, with a porosity and pore interconnectivity that facilitates cellular migration and the transport of nutrients and waste products into and out of the scaffolds. For the engineering of load bearing tissues, the scaffold may also be required to possess specific mechanical properties and/or ensure the transfer of mechanical stimuli to cells to direct their differentiation. Achieving these design goals is challenging, but could potentially be realised by integrating computational tools such as finite element (FE) modelling with three-dimensional (3D) printing techniques to assess how scaffold architecture and material properties influence the performance of the implant. In this study we first use Fused Deposition Modelling (FDM) to modulate the architecture of polycaprolactone (PCL) scaffolds, exploring the influence of varying fibre diameter, spacing and laydown pattern on the structural and mechanical properties of such scaffolds. We next demonstrate that a simple FE modelling strategy, which captures key aspects of the printed scaffold’s actual geometry and material behaviour, can be used to accurately model the mechanical characteristics of such scaffolds. We then show the utility of this strategy by using FE modelling to help design 3D printed scaffolds with mechanical properties mimicking that of articular cartilage. In conclusion, this study demonstrates that a relatively simple FE modelling approach can be used to inform the design of 3D printed scaffolds to ensure their bulk mechanical properties mimic specific target tissues.
AUTHOR Sharma, Aarushi and Desando, Giovanna and Petretta, Mauro and Chawla, Shikha and Bartolotti, Isabella and Manferdini, Cristina and Paolella, Francesca and Gabusi, Elena and Trucco, Diego and Ghosh, Sourabh and Lisignoli, Gina
Title Investigating the Role of Sustained Calcium Release in Silk-Gelatin-Based Three-Dimensional Bioprinted Constructs for Enhancing the Osteogenic Differentiation of Human Bone Marrow Derived Mesenchymal Stromal Cells
Year 2019
Journal/Proceedings ACS Biomaterials Science & Engineering
Reftype
DOI/URL DOI
AUTHOR Romanazzo, Sara and Nemec, Stephanie and Roohani, Iman
Title iPSC Bioprinting: Where are We at? [Abstract]
Year 2019
Journal/Proceedings Materials
Reftype
DOI/URL URL DOI
Abstract
Here, we present a concise review of current 3D bioprinting technologies applied to induced pluripotent stem cells (iPSC). iPSC have recently received a great deal of attention from the scientific and clinical communities for their unique properties, which include abundant adult cell sources, ability to indefinitely self-renew and differentiate into any tissue of the body. Bioprinting of iPSC and iPSC derived cells combined with natural or synthetic biomaterials to fabricate tissue mimicked constructs, has emerged as a technology that might revolutionize regenerative medicine and patient-specific treatment. This review covers the advantages and disadvantages of bioprinting techniques, influence of bioprinting parameters and printing condition on cell viability, and commonly used iPSC sources, and bioinks. A clear distinction is made for bioprinting techniques used for iPSC at their undifferentiated stage or when used as adult stem cells or terminally differentiated cells. This review presents state of the art data obtained from major searching engines, including Pubmed/MEDLINE, Google Scholar, and Scopus, concerning iPSC generation, undifferentiated iPSC, iPSC bioprinting, bioprinting techniques, cartilage, bone, heart, neural tissue, skin, and hepatic tissue cells derived from iPSC.
AUTHOR Zhuang, Pei and Ng, Wei Long and An, Jia and Chua, Chee Kai and Tan, Lay Poh
Title Layer-by-layer ultraviolet assisted extrusion-based (UAE) bioprinting of hydrogel constructs with high aspect ratio for soft tissue engineering applications [Abstract]
Year 2019
Journal/Proceedings PLOS ONE
Reftype
DOI/URL DOI
Abstract
One of the major challenges in the field of soft tissue engineering using bioprinting is fabricating complex tissue constructs with desired structure integrity and mechanical property. To accomplish such requirements, most of the reported works incorporated reinforcement materials such as poly(ϵ-caprolactone) (PCL) polymer within the 3D bioprinted constructs. Although this approach has made some progress in constructing soft tissue-engineered scaffolds, the mechanical compliance mismatch and long degradation period are not ideal for soft tissue engineering. Herein, we present a facile bioprinting strategy that combines the rapid extrusion-based bioprinting technique with an in-built ultraviolet (UV) curing system to facilitate the layer-by-layer UV curing of bioprinted photo-curable GelMA-based hydrogels to achieve soft yet stable cell-laden constructs with high aspect ratio for soft tissue engineering. GelMA is supplemented with a viscosity enhancer (gellan gum) to improve the bio-ink printability and shape fidelity while maintaining the biocompatibility before crosslinking via a layer-by-layer UV curing process. This approach could eventually fabricate soft tissue constructs with high aspect ratio (length to diameter) of ≥ 5. The effects of UV source on printing resolution and cell viability were also studied. As a proof-of-concept, small building units (3D lattice and tubular constructs) with high aspect ratio are fabricated. Furthermore, we have also demonstrated the ability to perform multi-material printing of tissue constructs with high aspect ratio along both the longitudinal and transverse directions for potential applications in tissue engineering of soft tissues. This layer-by-layer ultraviolet assisted extrusion-based (UAE) Bioprinting may provide a novel strategy to develop soft tissue constructs with desirable structure integrity.
AUTHOR Markstedt, Kajsa and Håkansson, Karl and Toriz, Guillermo and Gatenholm, Paul
Title Materials from trees assembled by 3D printing – Wood tissue beyond nature limits [Abstract]
Year 2019
Journal/Proceedings Applied Materials Today
Reftype
DOI/URL URL DOI
Abstract
Materials from trees have the potential to replace fossil based and other non-sustainable materials in everyday products, thus transforming the society back to a bioeconomy. This paper presents a 3D printing platform which mimics wood biogenesis for the assembly of wood biopolymers into wood-like hierarchical composites. The genome was substituted with G-code, the programming language which controls how the 3D printer assembles material. The rosette was replaced by the printer head for extrusion of cellulose. Instead of microtubules guiding the alignment of cellulose, the printing direction was guided by an x/y stage, thus mimicking the microfibril angle. The printed structures were locked by an enzymatic crosslinking reaction similar to what occurs in the cell wall upon lignification. Hierarchical structures characteristic for wood were designed and printed with control of density, swelling and directional strength. Accelerating the development of the 3D printing technology helps realize the circular bioeconomy where garments, packaging, furniture and entire houses are manufactured by 3D printing wood.
AUTHOR Zhou, Miaomiao and Lee, Bae Hoon and Tan, Yu Jun and Tan, Lay Poh
Title Microbial transglutaminase induced controlled crosslinking of gelatin methacryloyl to tailor rheological properties for 3D printing [Abstract]
Year 2019
Journal/Proceedings Biofabrication
Reftype
DOI/URL DOI
Abstract
Gelatin methacryloyl (GelMA) is a versatile biomaterial that has been shown to possess many advantages such as good biocompatibility, support for cell growth, tunable mechanical properties, photocurable capability, and low material cost. Due to these superior properties, much research has been carried out to develop GelMA as a bioink for bioprinting. However, there are still many challenges, and one major challenge is the control of its rheological properties to yield good printability. Herein, this study presents a strategy to control the rheology of GelMA through partial enzymatic crosslinking. Unlike other enzymatic crosslinking strategies where the rheological properties could not be controlled once reaction takes place, we could, to a large extent, keep the rheological properties stable by introducing a deactivation step after obtaining the optimized rheological properties. Ca2+-independent microbial transglutaminase (MTGase) was introduced to partially catalyze covalent bond formation between chains of GelMA. The enzyme was then deactivated to prevent further uncontrolled crosslinking that would render the hydrogel not printable. After printing, a secondary post-printing crosslinking step (photo crosslinking) was then introduced to ensure long-term stability of the printed structure for subsequent cell studies. Biocompatibility studies carried out using cells encapsulated in the printed structure showed excellent cell viability for at least 7 d. This strategy for better control of rheological properties of GelMA could more significantly enhance the usability of this material as bioink for bioprinting of cell-laden structures for soft tissue engineering.
AUTHOR Xu, Yichi and Peng, Jiang and Richards, Geoff and Lu, Shibi and Eglin, David
Title Optimization of electrospray fabrication of stem cell–embedded alginate–gelatin microspheres and their assembly in 3D-printed poly(ε-caprolactone) scaffold for cartilage tissue engineering [Abstract]
Year 2019
Journal/Proceedings Journal of Orthopaedic Translation
Reftype
DOI/URL URL DOI
Abstract
Objective Our study reports the optimization of electrospray human bone marrow stromal cell (hBMSCs)–embedded alginate–gelatin (Alg-Gel, same as following) microspheres for the purpose of their assembly in 3D-printed poly(ε-caprolactone) (PCL) scaffold for the fabrication of a mechanically stable and biological supportive tissue engineering cartilage construct. Methods The fabrication of the Alg-Gel microspheres using an electrospray technique was optimized in terms of polydispersity, yield of microspheres and circularity and varying fabrication conditions. PCL scaffolds were designed and printed by melt extrusion. Then, four groups were set: Alg-hBMSC microspheres cultured in the 2D well plate (Alg-hBMSCs+2D) group, Alg-Gel-hBMSC microspheres cultured in the 2D well plate (Alg-Gel-hBMSCs+2D) group, Alg-Gel-hBMSC microspheres embedded in PCL scaffold cultured in the 2D well plate (Alg-Gel-hBMSCs+2D) group and Alg-Gel-hBMSCs microspheres cultured in the 3D bioreactor (Alg-Gel-hBMSCs+3D) group. Cell viability, proliferation and chondrogenic differentiation were evaluated, and mechanical test was performed. Results Nonaggregated, low polydispersity and almost spherical microspheres of average diameter of 200–300 μm were produced with alginate 1.5 w: v%, gelatin (Type B) concentration of 0.5 w: v % and CaCl2 coagulating bath concentration of 3.0 w: v %, using 30G needle size and 8 kV and 0.6 bar voltage and air pressure, respectively. Alginate with gelatin hydrogel improved viability and promoted hBMSC proliferation better than alginate microspheres. Interestingly, hBMSCs embedded in microspheres assembled in 3D-printed PCL scaffold and cultured in a 3D bioreactor were more proliferative in comparison to the previous two groups (p < 0.05). Similarly, the GAG content, GAG/DNA ratio as well as Coll 2 and Aggr gene expression were increased in the last two groups. Conclusion Optimization of hBMSC-embedded Alg-Gel microspheres produced by electrospray has been performed. The Alg-Gel composition selected allows conservation of hBMSC viability and supports proliferation and matrix deposition. The possibility to seed and assemble microspheres in designed 3D-printed PCL scaffolds for the fabrication of a mechanically stable and biological supportive tissue engineering cartilage construct was demonstrated. Translational potential of this article We optimize and demonstrate that electrospray microsphere fabrication is a cytocompatible and facile process to produce the hBMSC-embedded microsize tissue-like particles that can easily be assembled into a stable construct. This finding could have application in the development of mechanically competent stem cell–based tissue engineering of cartilage regeneration.
AUTHOR Fenton, Owen S. and Paolini, Marion and Andresen, Jason L. and Müller, Florence J. and Langer, Robert
Title Outlooks on Three-Dimensional Printing for Ocular Biomaterials Research [Abstract]
Year 2019
Journal/Proceedings Journal of Ocular Pharmacology and Therapeutics
Reftype
DOI/URL DOI
Abstract
Abstract Given its potential for high-resolution, customizable, and waste-free fabrication of medical devices and in vitro biological models, 3-dimensional (3D) bioprinting has broad utility within the biomaterials field. Indeed, 3D bioprinting has to date been successfully used for the development of drug delivery systems, the recapitulation of hard biological tissues, and the fabrication of cellularized organ and tissue-mimics, among other applications. In this study, we highlight convergent efforts within engineering, cell biology, soft matter, and chemistry in an overview of the 3D bioprinting field, and we then conclude our work with outlooks toward the application of 3D bioprinting for ocular research in vitro and in vivo.
AUTHOR Filardo, G. and Petretta, M. and Cavallo, C. and Roseti, L. and Durante, S. and Albisinni, U. and Grigolo, B.
Title Patient-specific meniscus prototype based on 3D bioprinting of human cell-laden scaffold [Abstract]
Year 2019
Journal/Proceedings Bone and Joint Research
Reftype
DOI/URL DOI
Abstract
Objectives Meniscal injuries are often associated with an active lifestyle. The damage of meniscal tissue puts young patients at higher risk of undergoing meniscal surgery and, therefore, at higher risk of osteoarthritis. In this study, we undertook proof-of-concept research to develop a cellularized human meniscus by using 3D bioprinting technology. Methods A 3D model of bioengineered medial meniscus tissue was created, based on MRI scans of a human volunteer. The Digital Imaging and Communications in Medicine (DICOM) data from these MRI scans were processed using dedicated software, in order to obtain an STL model of the structure. The chosen 3D Discovery printing tool was a microvalve-based inkjet printhead. Primary mesenchymal stem cells (MSCs) were isolated from bone marrow and embedded in a collagen-based bio-ink before printing. LIVE/DEAD assay was performed on realized cell-laden constructs carrying MSCs in order to evaluate cell distribution and viability. Results This study involved the realization of a human cell-laden collagen meniscus using 3D bioprinting. The meniscus prototype showed the biological potential of this technology to provide an anatomically shaped, patient-specific construct with viable cells on a biocompatible material. Conclusion This paper reports the preliminary findings of the production of a custom-made, cell-laden, collagen-based human meniscus. The prototype described could act as the starting point for future developments of this collagen-based, tissue-engineered structure, which could aid the optimization of implants designed to replace damaged menisci. Cite this article: G. Filardo, M. Petretta, C. Cavallo, L. Roseti, S. Durante, U. Albisinni, B. Grigolo. Patient-specific meniscus prototype based on 3D bioprinting of human cell-laden scaffold. Bone Joint Res 2019;8:101–106. DOI: 10.1302/2046-3758.82.BJR-2018-0134.R1.
AUTHOR Pan, Houwen Matthew and Chen, Shengyang and Jang, Tae-Sik and Han, Win Tun and Jung, Hyun-do and Li, Yaning and Song, Juha
Title Plant seed-inspired cell protection, dormancy, and growth for large-scale biofabrication [Abstract]
Year 2019
Journal/Proceedings Biofabrication
Reftype
DOI/URL DOI
Abstract
Biofabrication technologies have endowed us with the capability to fabricate complex biological constructs. However, cytotoxic biofabrication conditions have been a major challenge for their clinical application, leading to a trade-off between cell viability and scalability of biofabricated constructs. Taking inspiration from nature, we proposed a cell protection strategy which mimicks the protected and dormant state of plant seeds in adverse external conditions and their germination in response to appropriate environmental cues. Applying this bioinspired strategy to biofabrication, we successfully preserved cell viability and enhanced the seeding of cell-laden biofabricated constructs via a cytoprotective pyrogallol (PG)-alginate encapsulation system. Our cytoprotective encapsulation technology utilizes PG-triggered sporulation and germination processes to preserve cells, is mechanically robust, chemically resistant, and highly customizable to adequately match cell protectability with cytotoxicity of biofabrication conditions. More importantly, the facile and tunable decapsulation of our PG-alginate system allows for effective germination of dormant cells, under typical culture conditions. With this approach, we have successfully achieved a biofabrication process which is reproducible, scalable, and provided a practical solution for off-the-shelf availability, shipping and temporary storage of fabricated bio-constructs.
AUTHOR Rotbaum, Y. and Puiu, C. and Rittel, D. and Domingos, M.
Title Quasi-static and dynamic in vitro mechanical response of 3D printed scaffolds with tailored pore size and architectures [Abstract]
Year 2019
Journal/Proceedings Materials Science and Engineering: C
Reftype
DOI/URL URL DOI
Abstract
Scaffold-based Tissue Engineering represents the most promising approach for the regeneration of load bearing skeletal tissues, in particular bone and cartilage. Scaffolds play major role in this process by providing a physical template for cells to adhere and proliferate whilst ensuring an adequate biomechanical support at the defect site. Whereas the quasi static mechanical properties of porous polymeric scaffolds are well documented, the response of these constructs under high strain compressive rates remain poorly understood. Therefore, this study investigates, for the first time, the influence of pore size and geometry on the mechanical behaviour of Polycaprolactone (PCL) scaffolds under quasi static and dynamic conditions. 3D printed scaffolds with varied pore sizes and geometries were obtained using different filament distances (FD) and lay-down patterns, respectively. In particular, by fixing the lay-down pattern at 0/90° and varying the FD between 480 and 980 μm it was possible to generate scaffolds with square pores with dimensions in the range of 150–650 μm and porosities of 59–79%. On the other hand, quadrangular, hexagonal, triangular and complex pore geometries with constant porosity (approx. 70%) were obtained at a fixed FD of 680 μm and imposing four different lay-down patterns of 0/90, 0/60/120, 0/45/90/135 and 0/30/60/90/120/150°, respectively. The mechanical response of printed scaffolds was assessed under two different compression loading regimes spanning five distinct strain rates, from 10−2 to 2000 s−1, using two different apparatus: a conventional screw-driven testing machine (Instron 4483) and a Split Hopkinson pressure bar (SHPB) equipped with a set of A201 Flexi-force™ (FF) force sensors and a pulse shaper. Our results show that the mechanical properties of PCL scaffolds are not strain rate sensitive between 1300 and 2000 s−1 and these strongly depend on the pore size (porosity) rather than pore geometry. Those findings are extremely relevant for the engineering of bone tissue scaffolds with enhanced mechanical stability by providing new data describing the mechanical response of these constructs at high strain rates as well as the at the transition between quasi static and dynamic regimes.
AUTHOR Prendergast, Margaret E. and Burdick, Jason A.
Title Recent Advances in Enabling Technologies in 3D Printing for Precision Medicine [Abstract]
Year 2019
Journal/Proceedings Advanced Materials
Reftype
DOI/URL DOI
Abstract
Abstract Advances in areas such as data analytics, genomics, and imaging have revealed individual patient complexities and exposed the inherent limitations of generic therapies for patient treatment. These observations have also fueled the development of precision medicine approaches, where therapies are tailored for the individual rather than the broad patient population. 3D printing is a field that intersects with precision medicine through the design of precision implants with patient-directed shapes, structures, and materials or for the development of patient-specific in vitro models that can be used for screening precision therapeutics. Toward their success, advances in 3D printing and biofabrication technologies are needed with enhanced resolution, complexity, reproducibility, and speed and that encompass a broad range of cells and materials. The overall goal of this progress report is to highlight recent advances in 3D printing technologies that are helping to enable advances important in precision medicine.
AUTHOR Dooley, Max and Prasopthum, Aruna and Liao, Zhiyu and Sinjab, Faris and McLaren, Jane and Rose, Felicity R. A. J. and Yang, Jing and Notingher, Ioan
Title Spatially-offset Raman spectroscopy for monitoring mineralization of bone tissue engineering scaffolds: feasibility study based on phantom samples [Abstract]
Year 2019
Journal/Proceedings Biomedical Optics Express
Reftype
DOI/URL URL DOI
Abstract
Using phantom samples, we investigated the feasibility of spatially-offset Raman spectroscopy (SORS) as a tool for monitoring non-invasively the mineralization of bone tissue engineering scaffold in-vivo. The phantom samples consisted of 3D-printed scaffolds of poly-caprolactone (PCL) and hydroxyapatite (HA) blends, with varying concentrations of HA, to mimic the mineralisation process. The scaffolds were covered by a 4 mm layer of skin to simulate the real in-vivo measurement conditions. At a concentration of HA approximately 1/3 that of bone (~0.6 g/cm3), the characteristic Raman band of HA (960 cm−1) was detectable when the PCL:HA layer was located at 4 mm depth within the scaffold (i.e. 8 mm below the skin surface). For the layers of the PCL:HA immediately under the skin (i.e. top of the scaffold), the detection limit of HA was 0.18 g/cm3, which is approximately one order of magnitude lower than that of bone. Similar results were also found for the phantoms simulating uniform and inward gradual mineralisation of the scaffold, indicating the suitability of SORS to detect early stages of mineralisation. Nevertheless, the results also show that the contribution of the materials surrounding the scaffold can be significant and methods for subtraction need to be investigated in the future. In conclusion, these results indicate that spatially-offset Raman spectroscopy is a promising technique for in-vivo longitudinal monitoring scaffold mineralization and bone re-growth.
AUTHOR Gloria, Antonio and Frydman, B. and Lamas, Miguel L. and Serra, Armenio C. and Martorelli, Massimo and Coelho, Jorge F. J. and Fonseca, Ana C. and Domingos, M.
Title The influence of poly(ester amide) on the structural and functional features of 3D additive manufactured poly(ε-caprolactone) scaffolds [Abstract]
Year 2019
Journal/Proceedings Materials Science and Engineering: C
Reftype
DOI/URL URL DOI
Abstract
The current research reports for the first time the use of blends of poly(ε-caprolactone) (PCL) and poly(ester amide) (PEA) for the fabrication of 3D additive manufactured scaffolds. Tailor made PEA was synthesized to afford fully miscible blends of PCL and PEA using different percentages (5, 10, 15 and 20% w/w). Stability, characteristic temperatures and material's compatibility were studied through thermal analyses (i.e., TGA, DSC). Even though DMTA and static compression tests demonstrated the possibility to improve the storage modulus, Young's modulus and maximum stress by increasing the amount of PEA, a decrease of hardness was found beyond a threshold concentration of PEA as the lowest values were achieved for PCL/PEA (20% w/w) scaffolds (from 0.39 ± 0.03 GPa to 0.21 ± 0.02 GPa in the analysed load range). The scaffolds presented a controlled morphology and a fully interconnected network of internal channels. The water contact angle measurements showed a clear increase of hydrophilicity resulting from the addition of PEA. This result was further corroborated with the improved adhesion and proliferation of human mesenchymal stem cells (hMSCs). The presence of PEA also influenced the cell morphology. Better cell spreading and a much higher and homogenous number of cells were observed for PCL/PEA scaffolds when compared to PCL ones.
AUTHOR Pedrotty, Dawn M. and Volodymyr, Kuzmenko and Erdem, Karabulut and Sugrue Alan, M. and Christopher, Livia and Vaidya Vaibhav, R. and McLeod Christopher, J. and Asirvatham Samuel, J. and Paul, Gatenholm and Suraj, Kapa
Title Three-Dimensional Printed Biopatches With Conductive Ink Facilitate Cardiac Conduction When Applied to Disrupted Myocardium
Year 2019
Journal/Proceedings Circulation: Arrhythmia and Electrophysiology
Reftype
DOI/URL DOI
AUTHOR Caetano, Guilherme and Wang, Weiguang and Murashima, Adriana and Passarini, José Roberto and Bagne, Leonardo and Leite, Marcel and Hyppolito, Miguel and Al-Deyab, Salem and El-Newehy, Mohamed and Bártolo, Paulo and Frade, Marco Andrey Cipriani
Title Tissue Constructs with Human Adipose-Derived Mesenchymal Stem Cells to Treat Bone Defects in Rats [Abstract]
Year 2019
Journal/Proceedings Materials
Reftype
DOI/URL URL DOI
Abstract
The use of porous scaffolds created by additive manufacturing is considered a viable approach for the regeneration of critical-size bone defects. This paper investigates the xenotransplantation of polycaprolactone (PCL) tissue constructs seeded with differentiated and undifferentiated human adipose-derived mesenchymal stem cells (hADSCs) to treat calvarial critical-sized defect in Wistar rats. PCL scaffolds without cells were also considered. In vitro and in vivo biological evaluations were performed to assess the feasibility of these different approaches. In the case of cell seeded scaffolds, it was possible to observe the presence of hADSCs in the rat tissue contributing directly (osteoblasts) and indirectly (stimulation by paracrine factors) to tissue formation, organization and mineralization. The presence of bone morphogenetic protein-2 (BMP-2) in the rat tissue treated with cell-seeded PCL scaffolds suggests that the paracrine factors of undifferentiated hADSC cells could stimulate BMP-2 production by surrounding cells, leading to osteogenesis. Moreover, BMP-2 acts synergistically with growth factors to induce angiogenesis, leading to higher numbers of blood vessels in the groups containing undifferentiated and differentiated hADSCs.
AUTHOR Kang, Yuan and Wang, Chaoli and Qiao, Youbei and Gu, Junwei and Zhang, Han and Peijs, Ton and Kong, Jie and Zhang, Guangcheng and Shi, Xuetao
Title Tissue-Engineered Trachea Consisting of Electrospun Patterned sc-PLA/GO-g-IL Fibrous Membranes with Antibacterial Property and 3D-Printed Skeletons with Elasticity [Abstract]
Year 2019
Journal/Proceedings Biomacromolecules
Reftype
DOI/URL DOI
Abstract
In this study, a tissue-engineered trachea, consisting of multilevel structural electrospun polylactide (PLA) membranes enveloping 3D-printed thermoplastic polyurethane (TPU) skeletons, was developed to create a mechanically robust, antibacterial and bioresorbable graft for the tracheal reconstruction. The study design incorporated two distinct uses of stereocomplex PLA: patterned electrospun fibers to enhance tissue integration compared to the random layered fibers, meanwhile possessing good antibacterial property; and 3D-printed TPU scaffold with elasticity to provide external support and protection. Herein, ionic liquid (IL)-functioned graphene oxide (GO) was synthesized and presented enhanced mechanical and hydrophilicity properties. More interesting, antibacterial activity of the GO-g-IL modified PLA membranes were proved by Escherichia coli and Staphylococcus aureus, showing superior antibacterial effect compared to single GO or IL. The synergistic antibacterial effect could be related to that GO break cytomembrane of bacteria by its extremely sharp edges, while IL works by electrostatic interaction between its cationic structures and electronegative phosphate groups of bacteria membranes, leading to the loss of cell electrolyte and cell death. Hence, after L929 fibroblast cells were seeded on patterned fibrous membranes with phenotypic shape, further effective cell infiltration, cell proliferation and attachment were observed. In addition, the tissue-engineered trachea scaffolds were implanted into rabbit models. The in vivo result confirmed that the scaffolds with patterned membranes manifested favorable biocompatibility and promoted tissue regeneration. In this study, a tissue-engineered trachea, consisting of multilevel structural electrospun polylactide (PLA) membranes enveloping 3D-printed thermoplastic polyurethane (TPU) skeletons, was developed to create a mechanically robust, antibacterial and bioresorbable graft for the tracheal reconstruction. The study design incorporated two distinct uses of stereocomplex PLA: patterned electrospun fibers to enhance tissue integration compared to the random layered fibers, meanwhile possessing good antibacterial property; and 3D-printed TPU scaffold with elasticity to provide external support and protection. Herein, ionic liquid (IL)-functioned graphene oxide (GO) was synthesized and presented enhanced mechanical and hydrophilicity properties. More interesting, antibacterial activity of the GO-g-IL modified PLA membranes were proved by Escherichia coli and Staphylococcus aureus, showing superior antibacterial effect compared to single GO or IL. The synergistic antibacterial effect could be related to that GO break cytomembrane of bacteria by its extremely sharp edges, while IL works by electrostatic interaction between its cationic structures and electronegative phosphate groups of bacteria membranes, leading to the loss of cell electrolyte and cell death. Hence, after L929 fibroblast cells were seeded on patterned fibrous membranes with phenotypic shape, further effective cell infiltration, cell proliferation and attachment were observed. In addition, the tissue-engineered trachea scaffolds were implanted into rabbit models. The in vivo result confirmed that the scaffolds with patterned membranes manifested favorable biocompatibility and promoted tissue regeneration.
AUTHOR Costa, Pedro F.
Title Translating Biofabrication to the Market [Abstract]
Year 2019
Journal/Proceedings Trends in Biotechnology
Reftype
DOI/URL URL DOI
Abstract
Biofabrication holds great potential to revolutionize important industries in the health, food, and textile sectors, but its translation to market is still challenging. I analyze the current state of innovation and commercialization in biofabrication and try to assess its limitations, strengths, and future progress.
AUTHOR Gretzinger, Sarah and Beckert, Nicole and Gleadall, Andrew and Lee-Thedieck, Cornelia and Hubbuch, Jürgen
Title 3D bioprinting – Flow cytometry as analytical strategy for 3D cell structures [Abstract]
Year 2018
Journal/Proceedings Bioprinting
Reftype
DOI/URL URL DOI
Abstract
The importance of 3D printing technologies increased significantly over the recent years. They are considered to have a huge impact in regenerative medicine and tissue engineering, since 3D bioprinting enables the production of cell-laden 3D scaffolds. Transition from academic research to pharmaceutical industry or clinical applications, however, is highly dependent on developing a robust and well-known process, while maintaining critical cell characteristics. Hence, a directed and systematic approach to 3D bioprinting process development is required, which also allows for the monitoring of these cell characteristics. This work presents the development of a flow cytometry-based analytical strategy as a tool for 3D bioprinting research. The development was based on a model process using a commercially available alginate-based bioink, the β-cell line INS-1E, and direct dispensing as 3D bioprinting method. We demonstrated that this set-up enabled viability and proliferation analysis. Additionally, use of an automated sampler facilitated high-throughput screenings. Finally, we showed that each process step, e.g. suspension of cells in bioink or 3D printing, cross-linking of the alginate scaffold after printing, has a crucial impact on INS-1E viability. This reflects the importance of process optimization in 3D bioprinting and the usefulness of the flow cytometry-based analytical strategy described here. The presented strategy has a great potential as a cell characterisation tool for 3D bioprinting and may contribute to a more directed process development.
AUTHOR Petta, D. and Armiento, A. R. and Grijpma, D. and Alini, M. and Eglin, D. and D'Este, M.
Title 3D bioprinting of a hyaluronan bioink through enzymatic-and visible light-crosslinking [Abstract]
Year 2018
Journal/Proceedings Biofabrication
Reftype
DOI/URL DOI
Abstract
Extrusion-based three-dimensional bioprinting relies on bioinks engineered to combine viscoelastic properties for extrusion and shape retention, and biological properties for cytocompatibility and tissue regeneration. To satisfy these conflicting requirements, bioinks often utilize either complex mixtures or complex modifications of biopolymers. In this paper we introduce and characterize a bioink exploiting a dual crosslinking mechanism, where an enzymatic reaction forms a soft gel suitable for cell encapsulation and extrusion, while a visible light photo-crosslinking allows shape retention of the printed construct. The influence of cell density and cell type on the rheological and printability properties was assessed correlating the printing outcomes with the damping factor, a rheological characteristic independent of the printing system. Stem cells, chondrocytes and fibroblasts were encapsulated, and their viability was assessed up to 14 days with live/dead, alamar blue and trypan blue assays. Additionally, the impact of the printing parameters on cell viability was investigated. Owing to its straightforward preparation, low modification, presence of two independent crosslinking mechanisms for tuning shear-thinning independently of the final shape fixation, the use of visible green instead of UV light, the possibility of encapsulating and sustaining the viability of different cell types, the hyaluronan bioink here presented is a valid biofabrication tool for producing 3D printed tissue-engineered constructs.
AUTHOR Aied, Ahmed and Song, Wenhui and Wang, Wenxin and Baki, Abdulrahman and Sigen, A.
Title 3D Bioprinting of stimuli-responsive polymers synthesised from DE-ATRP into soft tissue replicas [Abstract]
Year 2018
Journal/Proceedings Bioprinting
Reftype
DOI/URL URL DOI
Abstract
Synthetic polymers possess more reproducible physical and chemical properties than their naturally occurring counterparts. They have also emerged as an important alternative for fabricating tissue substitutes because they can be molecularly tailored to have vast array of molecular weights, block structures, active functional groups, and mechanical properties. To this date however, there has been very few successful and fully functional synthetic tissue and organ substitutes and with the rapidly spreading 3D printing technology beginning to reshape the tissue engineering and regenerative field, the need for an effective, safe, and bio printable biomaterial is becoming more and more urgent. Here, we have developed a synthetic polymer from controlled living radical polymerisation that can be printed into well-defined structures. The polymer showed low cytotoxicity before and after printing. Additionally, the incorporation of gelatine-methacrylate coated PLGA microparticles within the hydrogel provided cell adhesion surfaces for cell proliferation. The results point to possible application of the microparticle seeded, synthetic hydrogel as a direct printable tissue or organ substitute.
AUTHOR Lim, Seng Han and Kathuria, Himanshu and Tan, Justin Jia Yao and Kang, Lifeng
Title 3D printed drug delivery and testing systems — a passing fad or the future? [Abstract]
Year 2018
Journal/Proceedings Advanced Drug Delivery Reviews
Reftype
DOI/URL URL DOI
Abstract
The US Food and Drug Administration approval of the first 3D printed tablet in 2015 has ignited growing interest in 3D printing, or additive manufacturing (AM), for drug delivery and testing systems. Beyond just a novel method for rapid prototyping, AM provides key advantages over traditional manufacturing of drug delivery and testing systems. These includes the ability to fabricate complex geometries to achieve variable drug release kinetics; ease of personalising pharmacotherapy for patient and lowering the cost for fabricating personalised dosages. Furthermore, AM allows fabrication of complex and micron-sized tissue scaffolds and models for drug testing systems that closely resemble in vivo conditions. However, there are several limitations such as regulatory concerns that may impede the progression to market. Here, we provide an overview of the advantages of AM drug delivery and testing, as compared to traditional manufacturing techniques. Also, we discuss the key challenges and future directions for AM enabled pharmaceutical applications.
AUTHOR Caetano, Guilherme Ferreira and Wang, Weiguang and Chiang, Wei-Hung and Cooper, Glen and Diver, Carl and Blaker, Jonny James and Frade, Marco Andrey and Bártolo, Paulo
Title 3D-Printed Poly(ɛ-caprolactone)/Graphene Scaffolds Activated with P1-Latex Protein for Bone Regeneration [Abstract]
Year 2018
Journal/Proceedings 3D Printing and Additive Manufacturing
Reftype
DOI/URL DOI
Abstract
Abstract Biomanufacturing is a relatively new research domain focusing on the use of additive manufacturing technologies, biomaterials, cells, and biomolecular signals to produce tissue constructs for tissue engineering. For bone regeneration, researchers are focusing on the use of polymeric and polymer/ceramic scaffolds seeded with osteoblasts or mesenchymal stem cells. However, high-performance scaffolds in terms of mechanical, cell stimulation, and biological performance are still required. This article investigates the use of an extrusion additive manufacturing system to produce poly(ɛ-caprolactone) (PCL) and PCL/graphene nanosheet scaffolds for bone applications. Scaffolds with regular and reproducible architecture and uniform dispersion of graphene were produced and coated with P1-latex protein extracted from the Hevea brasiliensis rubber tree. Results show that the obtained scaffolds cultivated with human adipose-derived stem cells present no toxicity effects. The presence of graphene nanosheet and P1-latex protein in the scaffolds increased cell proliferation compared with PCL scaffolds. Moreover, the presence of P1-latex protein promotes earlier osteogenic differentiation, suggesting that PCL/graphene/P1-latex protein scaffolds are suitable for bone regeneration applications.
AUTHOR Couck, Sarah and Saint-Remi, Julien Cousin and der Perre, Stijn Van and Baron, Gino V. and Minas, Clara and Ruch, Patrick and Denayer, Joeri F. M.
Title 3D-printed SAPO-34 monoliths for gas separation [Abstract]
Year 2018
Journal/Proceedings Microporous and Mesoporous Materials
Reftype
DOI/URL URL DOI
Abstract
Abstract A 3D printing method (the Direct Ink writing, DIW, method) is applied to produce SAPO-34 zeolite based structured adsorbents with the shape of a honeycomb-like monolith. The use of the 3D printing technique gives this structure a well-defined and easily adaptable geometry. As binder material, methyl cellulose was used. The SAPO-34 monolith was characterized by SEM as well as Ar and Hg porosimetry. The CO2 adsorption affinity, capacity and heat of adsorption were determined by recording high pressure adsorption isotherms at different temperatures, using the gravimetric technique. The separation potential was investigated by means of breakthrough experiments with mixtures of CO2 and N2. The experimental selectivity of CO2/N2 separation was compared to the selectivity as predicted by the Ideal Adsorbed Solution Theory. A drop in capacity was noticed during the experiments and N2 capacities were close to zero or slightly negative due to the very low adsorption, meaning absolute selectivity values could not be determined. However, due to the low N2 capacity, experimental selectivity is estimated to be excellent as was predicted with IAST. While the 3D printing is found to be a practical, fast and flexible route to generate monolithic adsorbent structures, improvements in formulation are required in terms of sample robustness for handling purposes and heat transfer characteristics of the obtained monoliths during gas separation.
AUTHOR Shi, Pujiang and Tan, Yong Sheng Edgar and Yeong, Wai Yee and Li, Hoi Yeung and Laude, Augustinus
Title A bilayer photoreceptor‐retinal tissue model with gradient cell density design: A study of microvalve‐based bioprinting [Abstract]
Year 2018
Journal/Proceedings Journal of Tissue Engineering and Regenerative Medicine
Reftype
DOI/URL DOI
Abstract
Abstract ARPE‐19 and Y79 cells were precisely and effectively delivered to form an in vitro retinal tissue model via 3D cell bioprinting technology. The samples were characterized by cell viability assay, haematoxylin and eosin and immunofluorescent staining, scanning electrical microscopy and confocal microscopy, and so forth. The bioprinted ARPE‐19 cells formed a high‐quality cell monolayer in 14 days. Manually seeded ARPE‐19 cells were poorly controlled during and after cell seeding, and they aggregated to form uneven cell layer. The Y79 cells were subsequently bioprinted on the ARPE‐19 cell monolayer to form 2 distinctive patterns. The microvalve‐based bioprinting is efficient and accurate to build the in vitro tissue models with the potential to provide similar pathological responses and mechanism to human diseases, to mimic the phenotypic endpoints that are comparable with clinical studies, and to provide a realistic prediction of clinical efficacy.
AUTHOR Agarwala, Shweta and Lee, Jia Min and Ng, Wei Long and Layani, Michael and Yeong, Wai Yee and Magdassi, Shlomo
Title A novel 3D bioprinted flexible and biocompatible hydrogel bioelectronic platform [Abstract]
Year 2018
Journal/Proceedings Biosensors and Bioelectronics
Reftype
DOI/URL URL DOI
Abstract
Abstract Bioelectronics platforms are gaining widespread attention as they provide a template to study the interactions between biological species and electronics. Decoding the effect of the electrical signals on the cells and tissues holds the promise for treating the malignant tissue growth, regenerating organs and engineering new-age medical devices. This work is a step forward in this direction, where bio- and electronic materials co-exist on one platform without any need for post processing. We fabricate a freestanding and flexible hydrogel based platform using 3D bioprinting. The fabrication process is simple, easy and provides a flexible route to print materials with preferred shapes, size and spatial orientation. Through the design of interdigitated electrodes and heating coil, the platform can be tailored to print various circuits for different functionalities. The biocompatibility of the printed platform is tested using C2C12 murine myoblasts cell line. Furthermore, normal human dermal fibroblasts (primary cells) are also seeded on the platform to ascertain the compatibility.
AUTHOR Rayate, Amol and Jain, Prashant K.
Title A Review on 4D Printing Material Composites and Their Applications [Abstract]
Year 2018
Journal/Proceedings Materials Today: Proceedings
Reftype
DOI/URL URL DOI
Abstract
4D printing is an extension of 3D printing in which stimuli-responsive active smart materials are used to produce the static structure. This static structure then converts into another structure when it is exposed to the stimulus. Type of stimulus may be light, heat, pH, water, magnetic field etc. depending upon the material selected for 3D printing. In recent advances, these dynamic structures developed by 3D printing process are used for actuators, smart devices, aesthetic primitives, smart textiles, and also in biomedical applications. This paper is about the brief overview of the advanced materials for 4D printing and their applications.
AUTHOR Tognato, Riccardo and Armiento, Angela R. and Bonfrate, Valentina and Levato, Riccardo and Malda, Jos and Alini, Mauro and Eglin, David and Giancane, Gabriele and Serra, Tiziano
Title A Stimuli-Responsive Nanocomposite for 3D Anisotropic Cell-Guidance and Magnetic Soft Robotics [Abstract]
Year 2018
Journal/Proceedings Advanced Functional Materials
Reftype
DOI/URL DOI
Abstract
Abstract Stimuli-responsive materials have the potential to enable the generation of new bioinspired devices with unique physicochemical properties and cell-instructive ability. Enhancing biocompatibility while simplifying the production methodologies, as well as enabling the creation of complex constructs, i.e., via 3D (bio)printing technologies, remains key challenge in the field. Here, a novel method is presented to biofabricate cellularized anisotropic hybrid hydrogel through a mild and biocompatible process driven by multiple external stimuli: magnetic field, temperature, and light. A low-intensity magnetic field is used to align mosaic iron oxide nanoparticles (IOPs) into filaments with tunable size within a gelatin methacryloyl matrix. Cells seeded on top or embedded within the hydrogel align to the same axes of the IOPs filaments. Furthermore, in 3D, C2C12 skeletal myoblasts differentiate toward myotubes even in the absence of differentiation media. 3D printing of the nanocomposite hydrogel is achieved and creation of complex heterogeneous structures that respond to magnetic field is demonstrated. By combining the advanced, stimuli-responsive hydrogel with the architectural control provided by bioprinting technologies, 3D constructs can also be created that, although inspired by nature, express functionalities beyond those of native tissue, which have important application in soft robotics, bioactuators, and bionic devices.
AUTHOR Li, Huijun and Tan, Yu Jun and Li, Lin
Title A strategy for strong interface bonding by 3D bioprinting of oppositely charged κ-carrageenan and gelatin hydrogels [Abstract]
Year 2018
Journal/Proceedings Carbohydrate Polymers
Reftype
DOI/URL URL
Abstract
A promising approach for improving the interfacial bonding of a three-dimensionally (3D) printed multilayered structure has been investigated by taking advantage of the electrostatic interactions between two hydrogels with oppositely charges. Here, two hydrogels namely gelatin and κ-carrageenan, which are the cationic and anionic hydrogels respectively, are used. It is found that the interfacial bonding strength between these two oppositely charged hydrogels is significantly higher than that of a bilayered gelatin or a bilayered κ-carrageenan. The bioprinted multilayered κ-carrageenan-gelatin hydrogel construct demonstrates a very good biocompatibility and a good structure integrity at 37 °C. Our strategy also overcomes the limitation of using gelatin for bio-fabrication at 37 °C, without further post crosslinking.
AUTHOR Wang, Hanxiao and das Neves Domingos, Marco Andre and Scenini, Fabio
Title Advanced mechanical and thermal characterization of 3D bioextruded poly(ε-caprolactone)-based composites [Abstract]
Year 2018
Journal/Proceedings Rapid Prototyping Journal
Reftype
DOI/URL DOI
Abstract
Purpose The main purpose of the present work is to study the effect of nano hydroxyapatite (HA) and graphene oxide (GO) particles on thermal and mechanical performances of 3D printed poly(ε-caprolactone) (PCL) filaments used in Bone Tissue Engineering (BTE). Design/methodology/approach Raw materials were prepared by melt blending, followed by 3D printing via 3D Discovery (regenHU Ltd., CH) with all fabricating parameters kept constant. Filaments, including pure PCL, PCL/HA, and PCL/GO, were tested under the same conditions. Several techniques were used to mechanically, thermally, and microstructurally evaluate properties of these filaments, including Differential Scanning Calorimetry (DSC), tensile test, nano indentation, and Scanning Electron Microscope (SEM). Findings Results show that both HA and GO nano particles are capable of improving mechanical performance of PCL. Enhanced mechanical properties of PCL/HA result from reinforcing effect of HA, while a different mechanism is observed in PCL/GO, where degree of crystallinity plays an important role. In addition, GO is more efficient at enhancing mechanical performance of PCL compared with HA. Originality/value For the first time, a systematic study about effects of nano HA and GO particles on bioactive scaffolds produced by Additive Manufacturing (AM) for bone tissue engineering applications is conducted in this work. Mechanical and thermal behaviors of each sample, pure PCL, PCL/HA and PCL/GO, are reported, correlated, and compared with literature.
AUTHOR Fortunato, Gabriele Maria and Maria, Carmelo De and Eglin, David and Serra, Tiziano and Vozzi, Giovanni
Title An ink-jet printed electrical stimulation platform for muscle tissue regeneration [Abstract]
Year 2018
Journal/Proceedings Bioprinting
Reftype
DOI/URL URL DOI
Abstract
Conducting polymeric materials have been used to modulate response of cells seeded on their surfaces. However, there is still major improvement to be made related to their biocompatibility, conductivity, stability in biological milieu, and processability toward truly tissue engineered functional device. In this work, conductive polymer, poly(3,4-ethylene-dioxythiophene):polystyrene-sulfonate (PEDOT:PSS), and its possible applications in tissue engineering were explored. In particular PEDOT:PSS solution was inkjet printed onto a gelatin substrate for obtaining a conductive structure. Mechanical and electrical characterizations, structural stability by swelling and degradation tests were carried out on different PEDOT-based samples obtained by varying the number of printed PEDOT layers from 5 to 50 on gelatin substrate. Biocompatibility of substrates was investigated on C2C12 myoblasts, through metabolic activity assay and imaging analysis during a 7-days culture period, to assess cell morphology, differentiation and alignment. The results of this first part allowed to proceed with the second part of the study in which these substrates were used for the design of an electrical stimulation device, with the aim of providing the external stimulus (3 V amplitude square wave at 1 and 2 Hz frequency) to guide myotubes alignment and enhance differentiation, having in this way promising applications in the field of muscle tissue engineering.
AUTHOR Park, Hae Sang and Lee, Ji Seung and Jung, Harry and Kim, Do Yeon and Kim, Sang Wook and Sultan, Md. Tipu and Park, Chan Hum
Title An omentum-cultured 3D-printed artificial trachea: in vivo bioreactor [Abstract]
Year 2018
Journal/Proceedings Artificial Cells, Nanomedicine, and Biotechnology
Reftype
DOI/URL DOI
Abstract
AbstractThe purpose of this study was to evaluate whether the prior implantation of a 3D-printed polycaprolactone (PCL) artificial trachea in the omentum is beneficial for revascularization of the scaffold and reduces associated complications in the reconstruction of a circumferential tracheal defect. Ten New Zealand rabbits were divided into 2 groups: (1) PCL-OC group (PCL scaffold cultured in omentum for 2 weeks before transplantation) and (2) PCL group. In the PCL-OC group, newly formed connective tissue completely covered the luminal surface of the scaffold with mild inflammation at 2 weeks postoperatively; a minor degree of stenosis was noted at 8 weeks postoperatively. The PCL group showed scaffold exposure without any tissue regeneration at 2 weeks postoperatively, and a moderate degree of luminal stenosis 6 weeks after implantation. Histology revealed highly organized regenerated tissue composed of ciliated respiratory epithelium, and submucosal layer in the PCL-OC group. Neo-cartilage regeneration was noted in part of the regenerated tissue. The PCL group demonstrated severe inflammation and an unorganized structure compared to that of the PCL-OC group. In vivo omentum culture of the tracheal scaffold before transplantation is beneficial for rapid re-epithelialization and revascularization of the scaffold. It also prevents postoperative luminal stenosis.
AUTHOR Ng, Wei Long and Goh, Min Hao and Yeong, Wai Yee and Naing, May Win
Title Applying macromolecular crowding to 3D bioprinting: fabrication of 3D hierarchical porous collagen-based hydrogel constructs [Abstract]
Year 2018
Journal/Proceedings Biomaterials Science
Reftype
DOI/URL DOI
Abstract
Native tissues and/or organs possess complex hierarchical porous structures that confer highly-specific cellular functions. Despite advances in fabrication processes{,} it is still very challenging to emulate the hierarchical porous collagen architecture found in most native tissues. Hence{,} the ability to recreate such hierarchical porous structures would result in biomimetic tissue-engineered constructs. Here{,} a single-step drop-on-demand (DOD) bioprinting strategy is proposed to fabricate hierarchical porous collagen-based hydrogels. Printable macromolecule-based bio-inks (polyvinylpyrrolidone{,} PVP) have been developed and printed in a DOD manner to manipulate the porosity within the multi-layered collagen-based hydrogels by altering the collagen fibrillogenesis process. The experimental results have indicated that hierarchical porous collagen structures could be achieved by controlling the number of macromolecule-based bio-ink droplets printed on each printed collagen layer. This facile single-step bioprinting process could be useful for the structural design of collagen-based hydrogels for various tissue engineering applications.
AUTHOR Mouser, Vivian H. M. and Levato, Riccardo and Mensinga, Anneloes and Dhert, Wouter J. A. and Gawlitta, Debby and Malda, Jos
Title Bio-ink development for three-dimensional bioprinting of hetero-cellular cartilage constructs [Abstract]
Year 2018
Journal/Proceedings Connective Tissue Research
Reftype
DOI/URL DOI
Abstract
ABSTRACTBioprinting is a promising tool to fabricate organized cartilage. This study aimed to investigate the printability of gelatin-methacryloyl/gellan gum (gelMA/gellan) hydrogels with and without methacrylated hyaluronic acid (HAMA), and to explore (zone-specific) chondrogenesis of chondrocytes, articular cartilage progenitor cells (ACPCs), and multipotent mesenchymal stromal cells (MSCs) embedded in these bio-inks.The incorporating of HAMA in gelMA/gellan bio-ink increased filament stability, as measured using a filament collapse assay, but did not influence (zone-specific) chondrogenesis of any of the cell types. Highest chondrogenic potential was observed for MSCs, followed by ACPCs, which displayed relatively high proteoglycan IV mRNA levels. Therefore, two-zone constructs were printed with gelMA/gellan/HAMA containing ACPCs in the superficial region and MSCs in the middle/deep region. Chondrogenic differentiation was confirmed, however, printing influence cellular differentiation.ACPC- and MSC-laden gelMA/gellan/HAMA hydrogels are of interest for the fabrication of cartilage constructs. Nevertheless, this study underscores the need for careful evaluation of the effects of printing on cellular differentiation.
AUTHOR Gungor-Ozkerim, P. Selcan and Inci, Ilyas and Zhang, Yu Shrike and Khademhosseini, Ali and Dokmeci, Mehmet Remzi
Title Bioinks for 3D bioprinting: an overview [Abstract]
Year 2018
Journal/Proceedings Biomaterials Science
Reftype
DOI/URL DOI
Abstract
Bioprinting is an emerging technology with various applications in making functional tissue constructs to replace injured or diseased tissues. It is a relatively new approach that provides high reproducibility and precise control over the fabricated constructs in an automated manner{,} potentially enabling high-throughput production. During the bioprinting process{,} a solution of a biomaterial or a mixture of several biomaterials in the hydrogel form{,} usually encapsulating the desired cell types{,} termed the bioink{,} is used for creating tissue constructs. This bioink can be cross-linked or stabilized during or immediately after bioprinting to generate the final shape{,} structure{,} and architecture of the designed construct. Bioinks may be made from natural or synthetic biomaterials alone{,} or a combination of the two as hybrid materials. In certain cases{,} cell aggregates without any additional biomaterials can also be adopted for use as a bioink for bioprinting processes. An ideal bioink should possess proper mechanical{,} rheological{,} and biological properties of the target tissues{,} which are essential to ensure correct functionality of the bioprinted tissues and organs. In this review{,} we provide an in-depth discussion of the different bioinks currently employed for bioprinting{,} and outline some future perspectives in their further development.
AUTHOR García-Lizarribar, Andrea and Fernández-Garibay, Xiomara and Velasco-Mallorquí, Ferran and G. Castaño, Albert and Samitier, Josep and Ramón-Azcón, Javier
Title Composite Biomaterials as Long-Lasting Scaffolds for 3D Bioprinting of Highly Aligned Muscle Tissue
Year 2018
Journal/Proceedings Macromolecular Bioscience
Reftype
DOI/URL DOI
AUTHOR Visscher, D. O. and Gleadall, A. and Buskermolen, J. K. and Burla, F. and Segal, J. and Koenderink, G. H. and Helder, M. N. and van Zuijlen, P. P. M.
Title Design and fabrication of a hybrid alginate hydrogel/poly(ε-caprolactone) mold for auricular cartilage reconstruction [Abstract]
Year 2018
Journal/Proceedings Journal of Biomedical Materials Research Part B: Applied Biomaterials
Reftype
DOI/URL DOI
Abstract
Abstract The aim of this study was to design and manufacture an easily assembled cartilage implant model for auricular reconstruction. First, the printing accuracy and mechanical properties of 3D-printed poly-ε-caprolactone (PCL) scaffolds with varying porosities were determined to assess overall material properties. Next, the applicability of alginate as cell carrier for the cartilage implant model was determined. Using the optimal outcomes of both experiments (in terms of (bio)mechanical properties, cell survival, neocartilage formation, and printing accuracy), a hybrid auricular implant model was developed. PCL scaffolds with 600 μm distances between strands exhibited the best mechanical properties and most optimal printing quality for further exploration. In alginate, chondrocytes displayed high cell survival (~83% after 21 days) and produced cartilage-like matrix in vitro. Alginate beads cultured in proliferation medium exhibited slightly higher compressive moduli (6 kPa) compared to beads cultured in chondrogenic medium (3.5 kPa, p > .05). The final auricular mold could be printed with 300 μm pores and high fidelity, and the injected chondrocytes survived the culture period of 21 days. The presented hybrid auricular mold appears to be an adequate model for cartilage tissue engineering and may provide a novel approach to auricular cartilage regeneration for facial reconstruction. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res B Part B: Appl Biomater, 2018.
AUTHOR Schmieg, Barbara and Schimek, Adrian and Franzreb, Matthias
Title Development and performance of a 3D‐printable Polyethylenglycol‐Diacrylate hydrogel suitable for enzyme entrapment and long‐term biocatalytic applications [Abstract]
Year 2018
Journal/Proceedings Engineering in Life Sciences
Reftype
DOI/URL DOI
Abstract
Physical entrapment of enzymes within a porous matrix is a fast and gentle process to immobilize biocatalysts to enable their recycling and long‐term use. This study introduces the development of a biocompatible 3D‐printing material suitable for enzyme entrapment, while having good rheological and UV‐hardening properties. Three different viscosity‐enhancing additives have been tested in combination with a polyethylenglycol‐diacrylate‐based hydrogel system. The addition of polyxanthan or hectorite clay particles results in hydrogels that degrade over hours or days, releasing entrapped compounds. In contrast, the addition of nanometer‐sized silicate particles ensures processability while preventing disintegration of the hydrogel. Lattice structures with a total height of 6 mm consisting of 40 layers were 3D‐printed with all materials and characterized by image analysis. Rheological measurements identified a shear stress window of 200 < τ < 500 Pa at shear rates of 25 s−1 and 25°C for well‐defined geometries with an extrusion‐based printhead. Enzymes immobilized in these long‐term stable hydrogel structures retained an effective activity of approximately 10% compared to the free enzyme in solution. It could be shown that the reduction of effective activity isn't caused by a significant reduction of the intrinsic enzyme activity but by mass transfer limitations within the printed hydrogel structures. This article is protected by copyright. All rights reserved
AUTHOR Bastola, A. K. and Paudel, M. and Li, L.
Title Development of hybrid magnetorheological elastomers by 3D printing [Abstract]
Year 2018
Journal/Proceedings Polymer
Reftype
DOI/URL URL DOI
Abstract
Intelligent or smart materials have one or more properties that can be significantly changed in a controlled fashion by external stimuli, such as temperature, pH, electric or magnetic fields, etc. Magnetorheological (MR) materials are a class of smart materials whose properties can be varied by applying an external magnetic field. In this work, the possibility of employing a suitable 3D printing technology for the development of one of the smart MR materials, the magnetorheological elastomer (MRE) has been explored. In order to achieve such 3D printing, a multi-material printing is implemented, where a controlled volume of MR fluid is encapsulated within an elastomer matrix in the layer-by-layer fashion. The choice of printing materials determines the final structure of the 3D printed hybrid MR elastomer. Printing with a vulcanizing MR suspension produces the solid MR structure inside the elastomer matrix while printing with a non-vulcanizing MR suspension (MR fluid) results in the structures that the MR fluid is encapsulated inside the elastomer matrix. The 3D printability of different materials has been studied by measuring their rheological properties and we found that the highly shear thinning and thixotropic properties are important for 3D printability. The quality of the printed filaments strongly depends on the key printing parameters such as extrusion pressure, initial height and feed rate. The experimental results from the forced vibration testing show that the 3D printed MR elastomers could change their elastic and damping properties when exposed to the external magnetic field. Furthermore, the 3D printed MR elastomer also exhibits the anisotropic behavior when the direction of the magnetic field is changed with respect to the orientation of the printed filaments. This study has demonstrated that the 3D printing is viable for fabrication of hybrid MR elastomers with controlled structures of magnetic particles or MR fluids.
AUTHOR Prasopthum, Aruna and Shakesheff, Kevin M. and Yang, Jing
Title Direct three-dimensional printing of polymeric scaffolds with nanofibrous topography [Abstract]
Year 2018
Journal/Proceedings Biofabrication
Reftype
DOI/URL DOI
Abstract
Three-dimensional (3D) printing is a powerful manufacturing tool for making 3D structures with well-defined architectures for a wide range of applications. The field of tissue engineering has also adopted this technology to fabricate scaffolds for tissue regeneration. The ability to control architecture of scaffolds, e.g. matching anatomical shapes and having defined pore size, has since been improved significantly. However, the material surface of these scaffolds is smooth and does not resemble that found in natural extracellular matrix (ECM), in particular, the nanofibrous morphology of collagen. This natural nanoscale morphology plays a critical role in cell behaviour. Here, we have developed a new approach to directly fabricate polymeric scaffolds with an ECM-like nanofibrous topography and defined architectures using extrusion-based 3D printing. 3D printed tall scaffolds with interconnected pores were created with disparate features spanning from nanometres to centimetres. Our approach removes the need for a sacrificial mould and subsequent mould removal compared to previous methods. Moreover, the nanofibrous topography of the 3D printed scaffolds significantly enhanced protein absorption, cell adhesion and differentiation of human mesenchymal stem cells when compared to those with smooth material surfaces. These 3D printed scaffolds with both defined architectures and nanoscale ECM-mimicking morphologies have potential applications in cartilage and bone regeneration.
AUTHOR Zamani, Yasaman and Mohammadi, Javad and Amoabediny, Ghassem and Visscher, Dafydd O. and Helder, Marco N. and Zandieh-Doulabi, Behrouz and Klein-Nulend, Jenneke
Title Enhanced osteogenic activity by {MC}3T3-E1 pre-osteoblasts on chemically surface-modified poly($upepsilon$-caprolactone) 3D-printed scaffolds compared to {RGD} immobilized scaffolds [Abstract]
Year 2018
Journal/Proceedings Biomedical Materials
Reftype
DOI/URL DOI
Abstract
In bone tissue engineering, the intrinsic hydrophobicity and surface smoothness of three-dimensional (3D)-printed poly(ε-caprolactone) scaffolds hamper cell attachment, proliferation and differentiation. This intrinsic hydrophobicity of poly(ε-caprolactone) can be overcome by surface modifications, such as surface chemical modification or immobilization of biologically active molecules on the surface. Moreover, surface chemical modification may alter surface smoothness. Whether surface chemical modification or immobilization of a biologically active molecule on the surface is more effective to enhance pre-osteoblast proliferation and differentiation is currently unknown. Therefore, we aimed to investigate the osteogenic response of MC3T3-E1 pre-osteoblasts to chemically surface-modified and RGD-immobilized 3D-printed poly(ε-caprolactone) scaffolds. Poly(ε-caprolactone) scaffolds were 3D-printed consisting of strands deposited layer by layer with alternating 0°/90° lay-down pattern. 3D-printed poly(ε-caprolactone) scaffolds were surface-modified by either chemical modification using 3 M sodium hydroxide (NaOH) for 24 or 72 h, or by RGD-immobilization. Strands were visualized by scanning electron microscopy. MC3T3-E1 pre-osteoblasts were seeded onto the scaffolds and cultured up to 14 d. The strands of the unmodified poly(ε-caprolactone) scaffold had a smooth surface. NaOH treatment changed the scaffold surface topography from smooth to a honeycomb-like surface pattern, while RGD immobilization did not alter the surface topography. MC3T3-E1 pre-osteoblast seeding efficiency was similar (44%–54%) on all scaffolds after 12 h. Cell proliferation increased from day 1 to day 14 in unmodified controls (1.9-fold), 24 h NaOH-treated scaffolds (3-fold), 72 h NaOH-treated scaffolds (2.2-fold), and RGD-immobilized scaffolds (4.5-fold). At day 14, increased collagenous matrix deposition was achieved only on 24 h NaOH-treated (1.8-fold) and RGD-immobilized (2.2-fold) scaffolds compared to unmodified controls. Moreover, 24 h, but not 72 h, NaOH-treated scaffolds, increased alkaline phosphatase activity by 5-fold, while the increase by RGD immobilization was only 2.5-fold. Only 24 h NaOH-treated scaffolds enhanced mineralization (2.0-fold) compared to unmodified controls. In conclusion, RGD immobilization (0.011 μg mg−1 scaffold) on the surface and 24 h NaOH treatment of the surface of 3D-printed PCL scaffold both enhance pre-osteoblast proliferation and matrix deposition while only 24 h NaOH treatment results in increased osteogenic activity, making it the treatment of choice to promote bone formation by osteogenic cells.
AUTHOR Lee, Mihyun and Bae, Kraun and Guillon, Pierre and Chang, Jin and Arlov, Øystein and Zenobi-Wong, Marcy
Title Exploitation of Cationic Silica Nanoparticles for Bioprinting of Large-Scale Constructs with High Printing Fidelity [Abstract]
Year 2018
Journal/Proceedings ACS Applied Materials and Interfaces
Reftype
DOI/URL DOI
Abstract
Three-dimensional (3D) bioprinting allows the fabrication of 3D structures containing living cells whose 3D shape and architecture are matched to a patient. The feature is desirable to achieve personalized treatment of trauma or diseases. However, realization of this promising technique in the clinic is greatly hindered by inferior mechanical properties of most biocompatible bioink materials. Here, we report a novel strategy to achieve printing large constructs with high printing quality and fidelity using an extrusion-based printer. We incorporate cationic nanoparticles in an anionic polymer mixture, which significantly improves mechanical properties, printability, and printing fidelity of the polymeric bioink due to electrostatic interactions between the nanoparticles and polymers. Addition of cationic-modified silica nanoparticles to an anionic polymer mixture composed of alginate and gellan gum results in significantly increased zero-shear viscosity (1062%) as well as storage modulus (486%). As a result, it is possible to print a large (centimeter-scale) porous structure with high printing quality, whereas the use of the polymeric ink without the nanoparticles leads to collapse of the printed structure during printing. We demonstrate such a mechanical enhancement is achieved by adding nanoparticles within a certain size range (90%) and extracellular matrix secretion are observed for cells printed with nanocomposite inks. The design principle demonstrated can be applied for various anionic polymer-based systems, which could lead to achievement of 3D bioprinting-based personalized treatment.
AUTHOR Monz{'o}n, Mario and Liu, Chaozong and Ajami, Sara and Oliveira, Miguel and Donate, Ricardo and Ribeiro, Viviana and Reis, Rui L.
Title Functionally graded additive manufacturing to achieve functionality specifications of osteochondral scaffolds
Year 2018
Journal/Proceedings Bio-Design and Manufacturing
Reftype
DOI/URL DOI
AUTHOR Romanazzo, S. and Vedicherla, S. and Moran, C. and Kelly, D. J.
Title Meniscus ECM‐functionalised hydrogels containing infrapatellar fat pad‐derived stem cells for bioprinting of regionally defined meniscal tissue [Abstract]
Year 2018
Journal/Proceedings Journal of Tissue Engineering and Regenerative Medicine
Reftype
DOI/URL DOI
Abstract
Abstract Injuries to the meniscus of the knee commonly lead to osteoarthritis. Current therapies for meniscus regeneration, including meniscectomies and scaffold implantation, fail to achieve complete functional regeneration of the tissue. This has led to increased interest in cell and gene therapies and tissue engineering approaches to meniscus regeneration. The implantation of a biomimetic implant, incorporating cells, growth factors, and extracellular matrix (ECM)‐derived proteins, represents a promising approach to functional meniscus regeneration. The objective of this study was to develop a range of ECM‐functionalised bioinks suitable for 3D bioprinting of meniscal tissue. To this end, alginate hydrogels were functionalised with ECM derived from the inner and outer regions of the meniscus and loaded with infrapatellar fat pad‐derived stem cells. In the absence of exogenously supplied growth factors, inner meniscus ECM promoted chondrogenesis of fat pad‐derived stem cells, whereas outer meniscus ECM promoted a more elongated cell morphology and the development of a more fibroblastic phenotype. With exogenous growth factors supplementation, a more fibrogenic phenotype was observed in outer ECM‐functionalised hydrogels supplemented with connective tissue growth factor, whereas inner ECM‐functionalised hydrogels supplemented with TGFβ3 supported the highest levels of Sox‐9 and type II collagen gene expression and sulfated glycosaminoglycans (sGAG) deposition. The final phase of the study demonstrated the printability of these ECM‐functionalised hydrogels, demonstrating that their codeposition with polycaprolactone microfibres dramatically improved the mechanical properties of the 3D bioprinted constructs with no noticeable loss in cell viability. These bioprinted constructs represent an exciting new approach to tissue engineering of functional meniscal grafts.
AUTHOR Gill, Elisabeth L. and Li, Xia and Birch, Mark A. and Huang, Yan Yan Shery
Title Multi-length scale bioprinting towards simulating microenvironmental cues [Abstract]
Year 2018
Journal/Proceedings Bio-Design and Manufacturing
Reftype
DOI/URL DOI
Abstract
It is envisaged that the creation of cellular environments at multiple length scales, that recapitulate in vivo bioactive and structural roles, may hold the key to creating functional, complex tissues in the laboratory. This review considers recent advances in biofabrication and bioprinting techniques across different length scales. Particular focus is placed on 3D printing of hydrogels and fabrication of biomaterial fibres that could extend the feature resolution and material functionality of soft tissue constructs. The outlook from this review discusses how one might create and simulate microenvironmental cues in vitro. A fabrication platform that integrates the competencies of different biofabrication technologies is proposed. Such a multi-process, multiscale fabrication strategy may ultimately translate engineering capability into an accessible life sciences toolkit, fulfilling its potential to deliver in vitro disease models and engineered tissue implants.
AUTHOR Huang, Yun-An and Ho, Chris T. and Lin, Yu-Hsuan and Lee, Chen-Ju and Ho, Szu-Mo and Li, Ming-Chia and Hwang, Eric
Title Nanoimprinted Anisotropic Topography Preferentially Guides Axons and Enhances Nerve Regeneration [Abstract]
Year 2018
Journal/Proceedings Macromolecular Bioscience
Reftype
DOI/URL DOI
Abstract
Abstract Surface topography has a profound effect on the development of the nervous system, such as neuronal differentiation and morphogenesis. While the interaction of neurons and the surface topography of their local environment is well characterized, the neuron–topography interaction during the regeneration process remains largely unknown. To address this question, an anisotropic surface topography resembling linear grooves made from poly(ethylene-vinyl acetate) (EVA), a soft and biocompatible polymer, using nanoimprinting, is established. It is found that neurons from both the central and peripheral nervous system can survive and grow on this grooved surface. Additionally, it is observed that axons but not dendrites specifically align with these grooves. Furthermore, it is demonstrated that neurons on the grooved surface are capable of regeneration after an on-site injury. More importantly, these injured neurons have an accelerated and enhanced regeneration. Together, the data demonstrate that this anisotropic topography guides axon growth and improves axon regeneration. This opens up the possibility to study the effect of surface topography on regenerating axons and has the potential to be developed into a medical device for treating peripheral nerve injuries.
AUTHOR Hauser, Daniel and Estermann, Manuela and Milosevic, Ana and Steinmetz, Lukas and Vanhecke, Dimitri and Septiadi, Dedy and Drasler, Barbara and Petri-Fink, Alke and Ball, Vincent and Rothen-Rutishauser, Barbara
Title Polydopamine/Transferrin Hybrid Nanoparticles for Targeted Cell-Killing [Abstract]
Year 2018
Journal/Proceedings Nanomaterials
Reftype
DOI/URL URL DOI
Abstract
Polydopamine can form biocompatible particles that convert light into heat. Recently, a protocol has been optimized to synthesize polydopamine/protein hybrid nanoparticles that retain the biological function of proteins, and combine it with the stimuli-induced heat generation of polydopamine. We have utilized this novel system to form polydopamine particles, containing transferrin (PDA/Tf). Mouse melanoma cells, which strongly express the transferrin receptor, were exposed to PDA/Tf nanoparticles (NPs) and, subsequently, were irradiated with a UV laser. The cell death rate was monitored in real-time. When irradiated, the melanoma cells exposed to PDA/Tf NPs underwent apoptosis, faster than the control cells, pointing towards the ability of PDA/Tf to mediate UV-light-induced cell death. The system was also validated in an organotypic, 3D-printed tumor spheroid model, comprising mouse melanoma cells, and the exposure and subsequent irradiation with UV-light, yielded similar results to the 2D cell culture. The process of apoptosis was found to be targeted and mediated by the lysosomal membrane permeabilization. Therefore, the herein presented polydopamine/protein NPs constitute a versatile and stable system for cancer cell-targeting and photothermal apoptosis induction.
AUTHOR Chinga-Carrasco, Gary
Title Potential and Limitations of Nanocelluloses as Components in Biocomposite Inks for Three-Dimensional Bioprinting and for Biomedical Devices [Abstract]
Year 2018
Journal/Proceedings Biomacromolecules
Reftype
DOI/URL DOI
Abstract
Three-dimensional (3D) printing has rapidly emerged as a new technology with a wide range of applications that includes biomedicine. Some common 3D printing methods are based on the suitability of biopolymers to be extruded through a nozzle to construct a 3D structure layer by layer. Nanocelluloses with specific rheological characteristics are suitable components to form inks for 3D printing. This review considers various nanocelluloses that have been proposed for 3D printing with a focus on the potential advantages, limitations, and requirements when used for biomedical devices and when used in contact with the human body.
AUTHOR Kumari, Sushma and Bargel, Hendrik and Anby, Mette U. and Lafargue, David and Scheibel, Thomas
Title Recombinant Spider Silk Hydrogels for Sustained Release of Biologicals [Abstract]
Year 2018
Journal/Proceedings ACS Biomaterials Science and Engineering
Reftype
DOI/URL DOI
Abstract
Therapeutic biologics (i.e., proteins) have been widely recognized for the treatment, prevention, and cure of a variety of human diseases and syndromes. However, design of novel protein-delivery systems to achieve a nontoxic, constant, and efficient delivery with minimal doses of therapeutic biologics is still challenging. Here, recombinant spider silk-based materials are employed as a delivery system for the administration of therapeutic biologicals. Hydrogels made of the recombinant spider silk protein eADF4(C16) were used to encapsulate the model biologicals BSA, HRP, and LYS by direct loading or through diffusion, and their release was studied. Release of model biologicals from eADF4(C16) hydrogels is in part dependent on the electrostatic interaction between the biological and the recombinant spider silk protein variant used. In addition, tailoring the pore sizes of eADF4(C16) hydrogels strongly influenced the release kinetics. In a second approach, a particles-in-hydrogel system was used, showing a prolonged release in comparison with that of plain hydrogels (from days to week). The particle-enforced spider silk hydrogels are injectable and can be 3D printed. These initial studies indicate the potential of recombinant spider silk proteins to design novel injectable hydrogels that are suitable for delivering therapeutic biologics.
AUTHOR Li, Huijun and Tan, Cavin and Li, Lin
Title Review of 3D printable hydrogels and constructs [Abstract]
Year 2018
Journal/Proceedings Materials and Design
Reftype
DOI/URL URL DOI
Abstract
Three dimensional (3D) bioprinting technologies with appropriate bioinks are potentially able to fabricate artificial tissues or organs with precise control. A bioink is a mixture of biomaterial and living cells, which is a biomaterial for bioprinting. Hydrogels are the most appealing candidates of biomaterials because they have many similar features of the natural extracellular matrix and could also provide a highly hydrated environment for cell proliferation. In this field of bio-fabrication, particularly in bioprinting, the lack of suitable hydrogels remains a major challenge. Thus, choosing appropriate hydrogels for bioprinting is the key to print self-supporting 3D constructs. Most importantly, the considerations regarding the bioinks and the obtained constructs should be made clear. This review aims to provide the specific considerations regarding the important properties of a potential bioink and the generated 3D construct, including rheological, interfacial, structural, biological, and degradation properties, which are crucial for printing of complex and functional 3D structures. Among all of the above considerations, interfacial bonding is one of the important considerations of successfully obtaining a 3D structure. Unfortunately, it is rarely mentioned in the prior literature. This review also points out, for the first time, the characterization of a potential bioink from a rheological point of view. To provide readers with an understanding of the background, the review will first present current technologies for bioprinting and their limitations. Following this will be a summary and discussion of some frequently used hydrogels for bioprinting, and their respective limitations as well. The readers will be informed on the current limitations and achievements in 3D bioprinting. This review ultimately intends to help researchers to select or develop suitable bioinks for successfully bioprinting 3D constructs.
AUTHOR Gleadall, Andrew and Visscher, Dafydd and Yang, Jing and Thomas, Daniel and Segal, Joel
Title Review of additive manufactured tissue engineering scaffolds: relationship between geometry and performance [Abstract]
Year 2018
Journal/Proceedings Burns and Trauma
Reftype
DOI/URL DOI
Abstract
Material extrusion additive manufacturing has rapidly grown in use for tissue engineering research since its adoption in the year 2000. It has enabled researchers to produce scaffolds with intricate porous geometries that were not feasible with traditional manufacturing processes. Researchers can control the structural geometry through a wide range of customisable printing parameters and design choices including material, print path, temperature, and many other process parameters. Currently, the impact of these choices is not fully understood. This review focuses on how the position and orientation of extruded filaments, which sometimes referred to as the print path, lay-down pattern, or simply ``scaffold design'', affect scaffold properties and biological performance. By analysing trends across multiple studies, new understanding was developed on how filament position affects mechanical properties. Biological performance was also found to be affected by filament position, but a lack of consensus between studies indicates a need for further research and understanding. In most research studies, scaffold design was dictated by capabilities of additive manufacturing software rather than free-form design of structural geometry optimised for biological requirements. There is scope for much greater application of engineering innovation to additive manufacture novel geometries. To achieve this, better understanding of biological requirements is needed to enable the effective specification of ideal scaffold geometries.
AUTHOR Kuzmenko, Volodymyr and Karabulut, Erdem and Pernevik, Elin and Enoksson, Peter and Gatenholm, Paul
Title Tailor-made conductive inks from cellulose nanofibrils for 3D printing of neural guidelines [Abstract]
Year 2018
Journal/Proceedings Carbohydrate Polymers
Reftype
DOI/URL URL DOI
Abstract
Neural tissue engineering (TE), an innovative biomedical method of brain study, is very dependent on scaffolds that support cell development into a functional tissue. Recently, 3D patterned scaffolds for neural TE have shown significant positive effects on cells by a more realistic mimicking of actual neural tissue. In this work, we present a conductive nanocellulose-based ink for 3D printing of neural TE scaffolds. It is demonstrated that by using cellulose nanofibrils and carbon nanotubes as ink constituents, it is possible to print guidelines with a diameter below 1 mm and electrical conductivity of 3.8 × 10−1 S cm−1. The cell culture studies reveal that neural cells prefer to attach, proliferate, and differentiate on the 3D printed conductive guidelines. To our knowledge, this is the first research effort devoted to using cost-effective cellulosic 3D printed structures in neural TE, and we suppose that much more will arise in the near future.
AUTHOR Raghunath, Michael and Rimann, Markus and Kopanska, Katarzyna and Laternser, Sandra
Title TEDD Annual Meeting with 3D Bioprinting Workshop [Abstract]
Year 2018
Journal/Proceedings CHIMIA
Reftype
DOI/URL DOI
Abstract
Bioprinting is the technology of choice for realizing functional tissues such as vascular system, muscle, cartilage and bone. In the future, bioprinting will influence the way we engineer tissues and bring it to a new level of physiological relevance. That was the topic of the 2017 TEDD Annual Meeting at ZHAW Waedenswil on 8th and 9th November. In an exciting workshop, the two companies regenHU Ltd. and CELLINK gave us an insight into highly topical applications and collaborations in this domain.
AUTHOR Kelder, Cindy and Bakker, Astrid Diana and Klein-Nulend, Jenneke and Wismeijer, Daniël
Title The 3D Printing of Calcium Phosphate with K-Carrageenan under Conditions Permitting the Incorporation of Biological Components—A Method [Abstract]
Year 2018
Journal/Proceedings Journal of Functional Biomaterials
Reftype
DOI/URL URL DOI
Abstract
Critical-size bone defects are a common clinical problem. The golden standard to treat these defects is autologous bone grafting. Besides the limitations of availability and co-morbidity, autografts have to be manually adapted to fit in the defect, which might result in a sub-optimal fit and impaired healing. Scaffolds with precise dimensions can be created using 3-dimensional (3D) printing, enabling the production of patient-specific, ‘tailor-made’ bone substitutes with an exact fit. Calcium phosphate (CaP) is a popular material for bone tissue engineering due to its biocompatibility, osteoconductivity, and biodegradable properties. To enhance bone formation, a bioactive 3D-printed CaP scaffold can be created by combining the printed CaP scaffold with biological components such as growth factors and cytokines, e.g., vascular endothelial growth factor (VEGF), bone morphogenetic protein-2 (BMP-2), and interleukin-6 (IL-6). However, the 3D-printing of CaP with a biological component is challenging since production techniques often use high temperatures or aggressive chemicals, which hinders/inactivates the bioactivity of the incorporated biological components. Therefore, in our laboratory, we routinely perform extrusion-based 3D-printing with a biological binder at room temperature to create porous scaffolds for bone healing. In this method paper, we describe in detail a 3D-printing procedure for CaP paste with K-carrageenan as a biological binder.
AUTHOR Choudhury, Deepak and Anand, Shivesh and Win Naing, May
Title The Arrival of Commercial Bioprinters - Towards 3D Bioprinting Revolution!
Year 2018
Journal/Proceedings International Journal of Bioprinting
Reftype
DOI/URL DOI
AUTHOR Li, Huijun and Tan, Yu Jun and Liu, Sijun and Li, Lin
Title Three-Dimensional Bioprinting of Oppositely Charged Hydrogels with Super Strong Interface Bonding [Abstract]
Year 2018
Journal/Proceedings ACS Applied Materials and Interfaces
Reftype
DOI/URL DOI
Abstract
A novel strategy to improve the adhesion between printed layers of three-dimensional (3D) printed constructs is developed by exploiting the interaction between two oppositely charged hydrogels. Three anionic hydrogels [alginate, xanthan, and κ-carrageenan (Kca)] and three cationic hydrogels [chitosan, gelatin, and gelatin methacrylate (GelMA)] are chosen to find the optimal combination of two oppositely charged hydrogels for the best 3D printability with strong interface bonding. Rheological properties and printability of the hydrogels, as well as structural integrity of printed constructs in cell culture medium, are studied as functions of polymer concentration and the combination of hydrogels. Kca2 (2 wt % Kca hydrogel) and GelMA10 (10 wt % GelMA hydrogel) are found to be the best combination of oppositely charged hydrogels for 3D printing. The interfacial bonding between a Kca layer and a GelMA layer is proven to be significantly higher than that of the bilayered Kca or bilayered GelMA because of the formation of polyelectrolyte complexes between the oppositely charged hydrogels. A good cell viability of >96% is obtained for the 3D-bioprinted Kca–GelMA construct. This novel strategy has a great potential for 3D bioprinting of layered constructs with a strong interface bonding.
AUTHOR Allig, Sebastian and Mayer, Margot and Thielemann, Christiane
Title Workflow for bioprinting of cell-laden bioink
Year 2018
Journal/Proceedings Lekar a Technika
Reftype
DOI/URL URL
AUTHOR Huang, Ying and Zhang, Xiao-Fei and Gao, Guifang and Yonezawa, Tomo and Cui, Xiaofeng
Title 3D bioprinting and the current applications in tissue engineering [Abstract]
Year 2017
Journal/Proceedings Biotechnology Journal
Reftype
DOI/URL DOI
Abstract
Bioprinting as an enabling technology for tissue engineering possesses the promises to fabricate highly mimicked tissue or organs with digital control. As one of the biofabrication approaches, bioprinting has the advantages of high throughput and precise control of both scaffold and cells. Therefore, this technology is not only ideal for translational medicine but also for basic research applications. Bioprinting has already been widely applied to construct functional tissues such as vasculature, muscle, cartilage, and bone. In this review, the authors introduce the most popular techniques currently applied in bioprinting, as well as the various bioprinting processes. In addition, the composition of bioink including scaffolds and cells are described. Furthermore, the most current applications in organ and tissue bioprinting are introduced. The authors also discuss the challenges we are currently facing and the great potential of bioprinting. This technology has the capacity not only in complex tissue structure fabrication based on the converted medical images, but also as an efficient tool for drug discovery and preclinical testing. One of the most promising future advances of bioprinting is to develop a standard medical device with the capacity of treating patients directly on the repairing site, which requires the development of automation and robotic technology, as well as our further understanding of biomaterials and stem cell biology to integrate various printing mechanisms for multi-phasic tissue engineering.
AUTHOR Peng, Weijie and Datta, Pallab and Ayan, Bugra and Ozbolat, Veli and Sosnoski, Donna and Ozbolat, Ibrahim T.
Title 3D bioprinting for drug discovery and development in pharmaceutics [Abstract]
Year 2017
Journal/Proceedings Acta Biomaterialia
Reftype
DOI/URL URL DOI
Abstract
Successful launch of a commercial drug requires significant investment of time and financial resources wherein late-stage failures become a reason for catastrophic failures in drug discovery. This calls for infusing constant innovations in technologies, which can give reliable prediction of efficacy, and more importantly, toxicology of the compound early in the drug discovery process before clinical trials. Though computational advances have resulted in more rationale in silico designing, in vitro experimental studies still require gaining industry confidence and improving in vitro-in vivo correlations. In this quest, due to their ability to mimic the spatial and chemical attributes of native tissues, three-dimensional (3D) tissue models have now proven to provide better results for drug screening compared to traditional two-dimensional (2D) models. However, in vitro fabrication of living tissues has remained a bottleneck in realizing the full potential of 3D models. Recent advances in bioprinting provide a valuable tool to fabricate biomimetic constructs, which can be applied in different stages of drug discovery research. This paper presents the first comprehensive review of bioprinting techniques applied for fabrication of 3D tissue models for pharmaceutical studies. A comparative evaluation of different bioprinting modalities is performed to assess the performance and ability of fabricating 3D tissue models for pharmaceutical use as the critical selection of bioprinting modalities indeed plays a crucial role in efficacy and toxicology testing of drugs and accelerates the drug development cycle. In addition, limitations with current tissue models are discussed thoroughly and future prospects of the role of bioprinting in pharmaceutics are provided to the reader. Present advances in tissue biofabrication have crucial role to play in aiding the pharmaceutical development process achieve its objectives. Advent of three-dimensional (3D) models, in particular, is viewed with immense interest by the community due to their ability to mimic in vivo hierarchical tissue architecture and heterogeneous composition. Successful realization of 3D models will not only provide greater in vitro-in vivo correlation compared to the two-dimensional (2D) models, but also eventually replace pre-clinical animal testing, which has their own shortcomings. Amongst all fabrication techniques, bioprinting- comprising all the different modalities (extrusion-, droplet- and laser-based bioprinting), is emerging as the most viable fabrication technique to create the biomimetic tissue constructs. Notwithstanding the interest in bioprinting by the pharmaceutical development researchers, it can be seen that there is a limited availability of comparative literature which can guide the proper selection of bioprinting processes and associated considerations, such as the bioink selection for a particular pharmaceutical study. Thus, this work emphasizes these aspects of bioprinting and presents them in perspective of differential requirements of different pharmaceutical studies like in vitro predictive toxicology, high-throughput screening, drug delivery and tissue-specific efficacies. Moreover, since bioprinting techniques are mostly applied in regenerative medicine and tissue engineering, a comparative analysis of similarities and differences are also expounded to help researchers make informed decisions based on contemporary literature.
AUTHOR Choi, Y. J. and Yi, H. G. and Kim, S. W. and Cho, D. W.
Title 3D Cell Printed Tissue Analogues: A New Platform for Theranostics [Abstract]
Year 2017
Journal/Proceedings Theranostics
Reftype
DOI/URL URL
Abstract
Stem cell theranostics has received much attention for noninvasively monitoring and tracing transplanted therapeutic stem cells through imaging agents and imaging modalities. Despite the excellent regenerative capability of stem cells, their efficacy has been limited due to low cellular retention, low survival rate, and low engraftment after implantation. Three-dimensional (3D) cell printing provides stem cells with the similar architecture and microenvironment of the native tissue and facilitates the generation of a 3D tissue-like construct that exhibits remarkable regenerative capacity and functionality as well as enhanced cell viability. Thus, 3D cell printing can overcome the current concerns of stem cell therapy by delivering the 3D construct to the damaged site. Despite the advantages of 3D cell printing, the in vivo and in vitro tracking and monitoring of the performance of 3D cell printed tissue in a noninvasive and real-time manner have not been thoroughly studied. In this review, we explore the recent progress in 3D cell technology and its applications. Finally, we investigate their potential limitations and suggest future perspectives on 3D cell printing and stem cell theranostics.
AUTHOR Sommer, Marianne R. and Alison, Lauriane and Minas, Clara and Tervoort, Elena and Ruhs, Patrick A. and Studart, Andre R.
Title 3D printing of concentrated emulsions into multiphase biocompatible soft materials [Abstract]
Year 2017
Journal/Proceedings Soft Matter
Reftype
DOI/URL DOI
Abstract
3D printing via direct ink writing (DIW) is a versatile additive manufacturing approach applicable to a variety of materials ranging from ceramics over composites to hydrogels. Due to the mild processing conditions compared to other additive manufacturing methods{,} DIW enables the incorporation of sensitive compounds such as proteins or drugs into the printed structure. Although emulsified oil-in-water systems are commonly used vehicles for such compounds in biomedical{,} pharmaceutical{,} and cosmetic applications{,} printing of such emulsions into architectured soft materials has not been fully exploited and would open new possibilities for the controlled delivery of sensitive compounds. Here{,} we 3D print concentrated emulsions into soft materials{,} whose multiphase architecture allows for site-specific incorporation of both hydrophobic and hydrophilic compounds into the same structure. As a model ink{,} concentrated emulsions stabilized by chitosan-modified silica nanoparticles are studied{,} because they are sufficiently stable against coalescence during the centrifugation step needed to create a bridging network of droplets. The resulting ink is ideal for 3D printing as it displays high yield stress{,} storage modulus and elastic recovery{,} through the formation of networks of droplets as well as of gelled silica nanoparticles in the presence of chitosan. To demonstrate possible architectures{,} we print biocompatible soft materials with tunable hierarchical porosity containing an encapsulated hydrophobic compound positioned in specific locations of the structure. The proposed emulsion-based ink system offers great flexibility in terms of 3D shaping and local compositional control{,} and can potentially help address current challenges involving the delivery of incompatible compounds in biomedical applications.
AUTHOR Sultan, Sahar and Siqueira, Gilberto and Zimmermann, Tanja and Mathew, Aji P.
Title 3D printing of nano-cellulosic biomaterials for medical applications [Abstract]
Year 2017
Journal/Proceedings Current Opinion in Biomedical Engineering
Reftype
DOI/URL URL DOI
Abstract
Abstract Nanoscaled versions of cellulose viz. cellulose nanofibers (CNF) or cellulose nanocrystals (CNC) isolated from natural resources are being used extensively since the past decade in the biomedical field e.g. for tissue engineering, implants, drug delivery systems, cardiovascular devices, and wound healing due to their remarkable mechanical, chemical and biocompatible properties. In the recent years, 3D printing of nanocellulose in combination with polymers is being studied as a viable route to future regenerative therapy. The printability of nanocellulose hydrogels owing to their shear thinning behavior and the possibility to support living cells allows 3D bioprinting using nanocellulose, a recent development which holds tremendous potential.
AUTHOR Suntornnond, R. and Tan, E. Y. S. and An, J. and Chua, C. K.
Title A highly printable and biocompatible hydrogel composite for direct printing of soft and perfusable vasculature-like structures [Abstract]
Year 2017
Journal/Proceedings Scientific Reports
Reftype
DOI/URL URL DOI
Abstract
Vascularization is one major obstacle in bioprinting and tissue engineering. In order to create thick tissues or organs that can function like original body parts, the presence of a perfusable vascular system is essential. However, it is challenging to bioprint a hydrogel-based three-dimensional vasculature-like structure in a single step. In this paper, we report a new hydrogel-based composite that offers impressive printability, shape integrity, and biocompatibility for 3D bioprinting of a perfusable complex vasculature-like structure. The hydrogel composite can be used on a non-liquid platform and is printable at human body temperature. Moreover, the hydrogel composite supports both cell proliferation and cell differentiation. Our results represent a potentially new vascularization strategy for 3D bioprinting and tissue engineering.
AUTHOR Bastola, A. K. and Hoang, V. T. and Li, L.
Title A novel hybrid magnetorheological elastomer developed by 3D printing [Abstract]
Year 2017
Journal/Proceedings Materials and Design
Reftype
DOI/URL URL
Abstract
Abstract In this study, a novel magnetorheological (MR) hybrid elastomer has been developed using a 3D printing method. In such an MR hybrid elastomer, a controlled volume of an MR fluid was encapsulated layer by layer into an elastomer matrix by means of a 3D printer and each layer was a composite structure consisting of an MR fluid and an elastomer. Similar to current MR fluids and MR elastomers, mechanical properties of 3D printed MR hybrid elastomers could be controlled via an externally applied magnetic field. The experimental results showed that the relative change in the damping capability of the new MR elastomer was more pronounced than the change in its stiffness when exposed to an external magnetic field. The study demonstrated that the 3D printing technique is feasible for fabrication of MR elastomers with controlled microstructures including magnetic particles or MR fluids. The 3D printed MR hybrid elastomer is also a potential material as a tunable spring-damper element.
AUTHOR Lorson, Thomas and Jaksch, Sebastian and Lübtow, Michael M. and Jüngst, Tomasz and Groll, Jürgen and Lühmann, Tessa and Luxenhofer, Robert
Title A Thermogelling Supramolecular Hydrogel with Sponge-Like Morphology as a Cytocompatible Bioink [Abstract]
Year 2017
Journal/Proceedings Biomacromolecules
Reftype
DOI/URL DOI
Abstract
Biocompatible polymers that form thermoreversible supramolecular hydrogels have gained great interest in biomaterials research and tissue engineering. When favorable rheological properties are achieved at the same time, they are particularly promising candidates as material that allow for the printing of cells, so-called bioinks. We synthesized a novel thermogelling block copolymer and investigated the rheological properties of its aqueous solution by viscosimetry and rheology. The polymers undergo thermogelation between room temperature and body temperature, form transparent hydrogels of surprisingly high strength (G′ > 1000 Pa) and show rapid and complete shear recovery after stress. Small angle neutron scattering suggests an unusual bicontinuous sponge-like gel network. Excellent cytocompatibility was demonstrated with NIH 3T3 fibroblasts, which were incorporated and bioplotted into predefined 3D hydrogel structures without significant loss of viability. The developed materials fulfill all criteria for future use as bioink for biofabrication.
AUTHOR Charbe, Nitin B. and McCarron, Paul A. and Lane, Majella E. and Tambuwala, Murtaza M.
Title Application of three-dimensional printing for colon targeted drug delivery systems [Abstract]
Year 2017
Journal/Proceedings International Journal of Pharmaceutical Investigation
Reftype
DOI/URL URL
Abstract
Orally administered solid dosage forms currently dominate over all other dosage forms and routes of administrations. However, human gastrointestinal tract (GIT) poses a number of obstacles to delivery of the drugs to the site of interest and absorption in the GIT. Pharmaceutical scientists worldwide have been interested in colon drug delivery for several decades, not only for the delivery of the drugs for the treatment of colonic diseases such as ulcerative colitis and colon cancer but also for delivery of therapeutic proteins and peptides for systemic absorption. Despite extensive research in the area of colon targeted drug delivery, we have not been able to come up with an effective way of delivering drugs to the colon. The current tablets designed for colon drug release depend on either pH-dependent or time-delayed release formulations. During ulcerative colitis the gastric transit time and colon pH-levels is constantly changing depending on whether the patient is having a relapse or under remission. Hence, the current drug delivery system to the colon is based on one-size-fits-all. Fails to effectively deliver the drugs locally to the colon for colonic diseases and delivery of therapeutic proteins and peptides for systemic absorption from the colon. Hence, to overcome the current issues associated with colon drug delivery, we need to provide the patients with personalized tablets which are specifically designed to match the individual's gastric transit time depending on the disease state. Three-dimensional (3D) printing (3DP) technology is getting cheaper by the day and bespoke manufacturing of 3D-printed tablets could provide the solutions in the form of personalized colon drug delivery system. This review provides a bird's eye view of applications and current advances in pharmaceutical 3DP with emphasis on the development of colon targeted drug delivery systems.
AUTHOR Ribeiro, Alexandre and Blokzijl, Maarten Michiel and Levato, Riccardo and Visser, Claas Willem and Castilho, Miguel and Hennink, Wim E. and Vermonden, Tina and Malda, Jos
Title Assessing bioink shape fidelity to aid material development in 3D bioprinting [Abstract]
Year 2017
Journal/Proceedings Biofabrication
Reftype
DOI/URL DOI
Abstract
Abstract During extrusion-based bioprinting, the deposited bioink filaments are subjected to deformations, such as collapse of overhanging filaments, which compromises the ability to stack several layers of bioink, and fusion between adjacent filaments, which compromises the resolution and maintenance of a desired pore structure. When developing new bioinks, approaches to assess their shape fidelity after printing would be beneficial to evaluate the degree of deformation of the deposited filament and to estimate how similar the final printed construct would be to the design. However, shape fidelity has been prevalently assessed qualitatively through visual inspection after printing, hampering the direct comparison of the printability of different bioinks. In this technical note, we propose a quantitative evaluation for shape fidelity of bioinks based on testing the filament collapse on overhanging structures and the filament fusion of parallel printed strands. Both tests were applied on a hydrogel platform based on poloxamer 407 and poly(ethylene glycol) (PEG) blends, providing a library of hydrogels with different yield stresses. The presented approach is an easy way to assess bioink shape fidelity, applicable to any filament-based bioprinting system and able to quantitatively evaluate this aspect of printability , based on the degree of deformation of the printed filament. In addition, we built a simple theoretical model that relates filament collapse with bioink yield stress. The results of both shape fidelity tests underline the role of yield stress as one of the parameters influencing the printability of a bioink. The presented quantitative evaluation will allow for reproducible comparisons between different bioink platforms.
AUTHOR Aljohani, Waeljumah and Ullah, Muhammad Wajid and Zhang, Xianglin and Yang, Guang
Title Bioprinting and its applications in tissue engineering and regenerative medicine [Abstract]
Year 2017
Journal/Proceedings International Journal of Biological Macromolecules
Reftype
DOI/URL URL DOI
Abstract
Abstract Bioprinting of three-dimensional constructs mimicking natural-like extracellular matrix has revolutionized biomedical technology. Bioprinting technology circumvents various discrepancies associated with current tissue engineering strategies by providing an automated and advanced platform to fabricate various biomaterials through precise deposition of cells and polymers in a premeditated fashion. However, few obstacles associated with development of 3D scaffolds including varied properties of polymers used and viability, controlled distribution, and vascularization, etc. of cells hinder bioprinting of complex structures. Therefore, extensive efforts have been made to explore the potential of various natural polymers (e.g. cellulose, gelatin, alginate, and chitosan, etc.) and synthetic polymers in bioprinting by tuning their printability and cross-linking features, mechanical and thermal properties, biocompatibility, and biodegradability, etc. This review describes the potential of these polymers to support adhesion and proliferation of viable cells to bioprint cell laden constructs, bone, cartilage, skin, and neural tissues, and blood vessels, etc. for various applications in tissue engineering and regenerative medicines. Further, it describes various challenges associated with current bioprinting technology and suggests possible solutions. Although at early stage of development, the potential benefits of bioprinting technology are quite clear and expected to open new gateways in biomedical, pharmaceutics and several other fields in near future.
AUTHOR Nguyen, Duong and Hägg, Daniel and Forsman, Alma and Ekholm, Josefine and Nimkingratana, Puwapong and Brantsing, Camilla and Kalogeropoulos, Theodoros and Zaunz, Samantha and Concaro, Sebastian and Brittberg, Mats and Lindahl, Anders and Gatenholm, Paul and Enejder, Annika and Simonsson, Stina
Title Cartilage Tissue Engineering by the 3D Bioprinting of iPS Cells in a Nanocellulose/Alginate Bioink [Abstract]
Year 2017
Journal/Proceedings Scientific Reports
Reftype
DOI/URL DOI
Abstract
Cartilage lesions can progress into secondary osteoarthritis and cause severe clinical problems in numerous patients. As a prospective treatment of such lesions, human-derived induced pluripotent stem cells (iPSCs) were shown to be 3D bioprinted into cartilage mimics using a nanofibrillated cellulose (NFC) composite bioink when co-printed with irradiated human chondrocytes. Two bioinks were investigated: NFC with alginate (NFC/A) or hyaluronic acid (NFC/HA). Low proliferation and phenotypic changes away from pluripotency were seen in the case of NFC/HA. However, in the case of the 3D-bioprinted NFC/A (60/40, dry weight % ratio) constructs, pluripotency was initially maintained, and after five weeks, hyaline-like cartilaginous tissue with collagen type II expression and lacking tumorigenic Oct4 expression was observed in 3D -bioprinted NFC/A (60/40, dry weight % relation) constructs. Moreover, a marked increase in cell number within the cartilaginous tissue was detected by 2-photon fluorescence microscopy, indicating the importance of high cell densities in the pursuit of achieving good survival after printing. We conclude that NFC/A bioink is suitable for bioprinting iPSCs to support cartilage production in co-cultures with irradiated chondrocytes.
AUTHOR Siqueira, Gilberto and Kokkinis, Dimitri and Libanori, Rafael and Hausmann, Michael K. and Gladman, Amelia Sydney and Neels, Antonia and Tingaut, Philippe and Zimmermann, Tanja and Lewis, Jennifer A. and Studart, André R.
Title Cellulose Nanocrystal Inks for 3D Printing of Textured Cellular Architectures [Abstract]
Year 2017
Journal/Proceedings Advanced Functional Materials
Reftype
DOI/URL DOI
Abstract
3D printing of renewable building blocks like cellulose nanocrystals offers an attractive pathway for fabricating sustainable structures. Here, viscoelastic inks composed of anisotropic cellulose nanocrystals (CNC) that enable patterning of 3D objects by direct ink writing are designed and formulated. These concentrated inks are composed of CNC particles suspended in either water or a photopolymerizable monomer solution. The shear-induced alignment of these anisotropic building blocks during printing is quantified by atomic force microscopy, polarized light microscopy, and 2D wide-angle X-ray scattering measurements. Akin to the microreinforcing effect in plant cell walls, the alignment of CNC particles during direct writing yields textured composites with enhanced stiffness along the printing direction. The observations serve as an important step forward toward the development of sustainable materials for 3D printing of cellular architectures with tailored mechanical properties.
AUTHOR Thamm, Christopher and DeSimone, Elise and Scheibel, Thomas
Title Characterization of Hydrogels Made of a Novel Spider Silk Protein eMaSp1s and Evaluation for 3D Printing [Abstract]
Year 2017
Journal/Proceedings Macromolecular Bioscience
Reftype
DOI/URL DOI
Abstract
Recombinantly produced spider silk proteins have high potential for bioengineering and various biomedical applications because of their biocompatibility, biodegradability, and low immunogenicity. Here, the recently described small spider silk protein eMaSp1s is assembled into hydrogels, which can be 3D printed into scaffolds. Further, blending with a recombinantly produced MaSp2 derivative eADF4(C16) alters the mechanical properties of the resulting hydrogels. Different spider silk hydrogels also show a distinct recovery after a high shear stress deformation, exhibiting the tunability of their features for selected applications.
AUTHOR D'Amora, Ugo and D'Este, Matteo and Eglin, David and Safari, Fatemeh and Sprecher, Christoph and Gloria, Antonio and De Santis, Roberto and Alini, Mauro and Ambrosio, Luigi
Title Collagen Density Gradient on 3D Printed Poly(ε-Caprolactone) Scaffolds for Interface Tissue Engineering
Year 2017
Journal/Proceedings Journal of tissue engineering and regenerative medicine
Reftype
DOI/URL DOI
AUTHOR Baumann, Bernhard and Jungst, Tomasz and Stichler, Simone and Feineis, Susanne and Wiltschka, Oliver and Kuhlmann, Matthias and Lindén, Mika and Groll, Jürgen
Title Control of Nanoparticle Release Kinetics from 3D Printed Hydrogel Scaffolds [Abstract]
Year 2017
Journal/Proceedings Angewandte Chemie International Edition
Reftype
DOI/URL DOI
Abstract
The convergence of biofabrication with nanotechnology is largely unexplored but enables geometrical control of cell-biomaterial arrangement combined with controlled drug delivery and release. As a step towards integration of these two fields of research, this study demonstrates that modulation of electrostatic nanoparticle–polymer and nanoparticle–nanoparticle interactions can be used for tuning nanoparticle release kinetics from 3D printed hydrogel scaffolds. This generic strategy can be used for spatiotemporal control of the release kinetics of nanoparticulate drug vectors in biofabricated constructs.
AUTHOR Mouser, V. H. M. and Abbadessa, A. and Levato, R. and Hennink, W. E. and Vermonden, T. and Gawlitta, D. and Malda, J.
Title Development of a thermosensitive HAMA-containing bio-ink for the fabrication of composite cartilage repair constructs [Abstract]
Year 2017
Journal/Proceedings Biofabrication
Reftype
DOI/URL URL
Abstract
Fine-tuning of bio-ink composition and material processing parameters is crucial for the development of biomechanically relevant cartilage constructs. This study aims to design and develop cartilage constructs with tunable internal architectures and relevant mechanical properties. More specifically, the potential of methacrylated hyaluronic acid (HAMA) added to thermosensitive hydrogels composed of methacrylated poly[ N -(2-hydroxypropyl)methacrylamide mono/dilactate] (pHPMA-lac)/polyethylene glycol (PEG) triblock copolymers, to optimize cartilage-like tissue formation by embedded chondrocytes, and enhance printability was explored. Additionally, co-printing with polycaprolactone (PCL) was performed for mechanical reinforcement. Chondrocyte-laden hydrogels composed of pHPMA-lac-PEG and different concentrations of HAMA (0%–1% w/w) were cultured for 28 d in vitro and subsequently evaluated for the presence of cartilage-like matrix. Young’s moduli were determined for hydrogels with the different HAMA concentrations. Additionally, hydrogel/PCL constructs with different internal architectures were co-printed and analyzed for their mechanical properties. The results of this study demonstrated a dose-dependent effect of HAMA concentration on cartilage matrix synthesis by chondrocytes. Glycosaminoglycan (GAG) and collagen type II content increased with intermediate HAMA concentrations (0.25%–0.5%) compared to HAMA-free controls, while a relatively high HAMA concentration (1%) resulted in increased fibrocartilage formation. Young’s moduli of generated hydrogel constructs ranged from 14 to 31 kPa and increased with increasing HAMA concentration. The pHPMA-lac-PEG hydrogels with 0.5% HAMA were found to be optimal for cartilage-like tissue formation. Therefore, this hydrogel system was co-printed with PCL to generate porous or solid constructs with different mesh sizes. Young’s moduli of these composite constructs were in the range of native cartilage (3.5–4.6 MPa). Interestingly, the co-printing procedure influenced the mechanical properties of the final constructs. These findings are relevant for future bio-ink development, as they demonstrate the importance of selecting proper HAMA concentrations, as well as appropriate print settings and construct designs for optimal cartilage matrix deposition and final mechanical properties of constructs, respectively.
AUTHOR Stichler, Simone and Böck, Thomas and Paxton, Naomi Claire and Bertlein, Sarah and Levato, Riccardo and Schill, Verena and Smolan, Willi and Malda, Jos and Tessmar, Joerg and Blunk, Torsten and Groll, Juergen
Title Double printing of hyaluronic acid / poly(glycidol) hybrid hydrogels with poly(ε-caprolactone) for MSC chondrogenesis [Abstract]
Year 2017
Journal/Proceedings Biofabrication
Reftype
DOI/URL DOI
Abstract
Abstract This study investigates the use of allyl-functionalized poly(glycidol)s (P(AGE-co-G)) as cytocompatible cross-linker for thiol-functionalized hyaluronic acid (HA-SH) and the optimization of this hybrid hydrogel as bioink for 3D bioprinting. Chemical cross-linking of gels with 10 wt.% overall polymer concentration was achieved by UV-induced radical thiol-ene coupling between the thiol and allyl groups. Addition of unmodified high molecular weight HA (1.36 MDa) allowed tuning of the rheology for extrusion based bioprinting. Incorporation of additional HA resulted in hydrogels with lower Young’s modulus and higher swelling ratio especially in the first 24 h, but a comparable equilibrium swelling for all gels after 24 h. Embedding of human and equine mesenchymal stem cells (MSCs) in the gels and subsequent in vitro culture showed promising chondrogenic differentiation after 21 d for cells from both origins. Moreover, cells could be printed with these gels, and embedded hMSCs showed good cell survival for at least 21 d in culture. To achieve mechanical stable and robust constructs for the envisioned application in articular cartilage, the formulations were adjusted for double printing with the thermoplastic poly--caprolactone (PCL).
AUTHOR Liao, Zhiyu and Sinjab, Faris and Nommeots-Nomm, Amy and Jones, Julian and Ruiz-Cantu, Laura and Yang, Jing and Rose, Felicity and Notingher, Ioan
Title Feasibility of Spatially Offset Raman Spectroscopy for in Vitro and in Vivo Monitoring Mineralization of Bone Tissue Engineering Scaffolds [Abstract]
Year 2017
Journal/Proceedings Analytical Chemistry
Reftype
DOI/URL DOI
Abstract
We investigated the feasibility of using spatially offset Raman spectroscopy (SORS) for nondestructive characterization of bone tissue engineering scaffolds. The deep regions of these scaffolds, or scaffolds implanted subcutaneously in live animals, are typically difficult to measure by confocal Raman spectroscopy techniques because of the limited depth penetration of light caused by the high level of light scattering. Layered samples consisting of bioactive glass foams (IEIC16), three-dimensional (3D)-printed biodegradable poly(lactic-co-glycolic acid) scaffolds (PLGA), and hydroxyapatite powder (HA) were used to mimic nondestructive detection of biomineralization for intact real-size 3D tissue engineering constructs. SORS spectra were measured with a new SORS instrument using a digital micromirror device (DMD) to allow software selection of the spatial offsets. The results show that HA can be reliably detected at depths of 0–2.3 mm, which corresponds to the maximum accessible spatial offset of the current instrument. The intensity ratio of Raman bands associated with the scaffolds and HA with the spatial offset depended on the depth at which HA was located. Furthermore, we show the feasibility for in vivo monitoring mineralization of scaffold implanted subcutaneously by demonstrating the ability to measure transcutaneously Raman signals of the scaffolds and HA (fresh chicken skin used as a top layer). The ability to measure spectral depth profiles at high speed (5 s acquisition time) and the ease of implementation make SORS a promising approach for noninvasive characterization of cell/tissue development in vitro, and for long-term in vivo monitoring the mineralization in 3D scaffolds subcutaneously implanted in small animals.
AUTHOR Mancini, Irina and Vindas Bolaños, Rafael and Brommer, Harold and Castilho, Miguel and Ribeiro, Alexandro and van Loon, Johannes and Mensinga, Anneloes and Rijen, Mattie and Malda, Jos and van Weeren, Paul
Title Fixation of hydrogel constructs for cartilage repair in the equine model: a challenging issue [Abstract]
Year 2017
Journal/Proceedings Tissue Engineering Part C: Methods
Reftype
DOI/URL DOI
Abstract
u> Objective To evaluate the use of commercial and autologous fibrin glue and of an alternative method based on a 3D-printed polycaprolactone (PCL) anchor for the fixation of hydrogel-based scaffolds in an equine model for cartilage repair. Methods In a first study, three different hydrogel-based materials were orthotopically implanted in nine horses for 1-4 weeks in 6mm diameter full thickness cartilage defects in the medial femoral trochlear ridge and fixated with commercially available fibrin glue (CFG). One defect was filled with CFG only as a control. In a second study, CFG and autologous fibrin glue (AFG) were compared in an ectopic equine model. The third study compared the efficacy of AFG and a 3D-printed PCL-based osteal anchor for fixation of PCL-reinforced hydrogels in 3 horses for 2 weeks, with a 4 week follow-up to evaluate integration of bone with the PCL anchor. Short-term scaffold integration and cell infiltration were evaluated by micro-CT and histology as outcome parameters. Results The first study showed signs of subchondral bone resorption in all defects, including the controls filled with CFG only, with significant infiltration of neutrophils. Ectopically, CFG induced clear inflammation with strong neutrophil accumulation, AFG was less reactive, showing fibroblast infiltration only. In the third study the fixation potential for PCL-reinforced hydrogels of AFG was inferior to the PCL anchor. PCL-reinforcement had disappeared from two defects and showed signs of dislodging in the remaining four. All 6 constructs fixated with the PCL anchor were still in place after 2 weeks. At 4 weeks, the PCL anchor showed good integration and signs of new bone formation. Conclusions The use of AFG should be preferred to xenogeneic products in the horse, but AFG is subject to individual variations and laborious to make. The PCL anchor provide the best fixation, however this technique involves the whole osteochondral unit, which entails a different conceptual approach to cartilage repair.
AUTHOR Borovjagin, Anton V. and Ogle, Brenda M. and Berry, Joel L. and Zhang, Jianyi
Title From Microscale Devices to 3D Printing [Abstract]
Year 2017
Journal/Proceedings Circulation Research
Reftype
DOI/URL URL DOI
Abstract
Current strategies for engineering cardiovascular cells and tissues have yielded a variety of sophisticated tools for studying disease mechanisms, for development of drug therapies, and for fabrication of tissue equivalents that may have application in future clinical use. These efforts are motivated by the need to extend traditional 2-dimensional (2D) cell culture systems into 3D to more accurately replicate in vivo cell and tissue function of cardiovascular structures. Developments in microscale devices and bioprinted 3D tissues are beginning to supplant traditional 2D cell cultures and preclinical animal studies that have historically been the standard for drug and tissue development. These new approaches lend themselves to patient-specific diagnostics, therapeutics, and tissue regeneration. The emergence of these technologies also carries technical challenges to be met before traditional cell culture and animal testing become obsolete. Successful development and validation of 3D human tissue constructs will provide powerful new paradigms for more cost effective and timely translation of cardiovascular tissue equivalents.
AUTHOR Henriksson, I. and Gatenholm, P. and Hägg, D. A.
Title Increased lipid accumulation and adipogenic gene expression of adipocytes in 3D bioprinted nanocellulose scaffolds [Abstract]
Year 2017
Journal/Proceedings Biofabrication
Reftype
DOI/URL URL
Abstract
Compared to standard 2D culture systems, new methods for 3D cell culture of adipocytes could provide more physiologically accurate data and a deeper understanding of metabolic diseases such as diabetes. By resuspending living cells in a bioink of nanocellulose and hyaluronic acid, we were able to print 3D scaffolds with uniform cell distribution. After one week in culture, cell viability was 95%, and after two weeks the cells displayed a more mature phenotype with larger lipid droplets than standard 2D cultured cells. Unlike cells in 2D culture, the 3D bioprinted cells did not detach upon lipid accumulation. After two weeks, the gene expression of the adipogenic marker genes PPAR γ and FABP4 was increased 2.0- and 2.2-fold, respectively, for cells in 3D bioprinted constructs compared with 2D cultured cells. Our 3D bioprinted culture system produces better adipogenic differentiation of mesenchymal stem cells and a more mature cell phenotype than conventional 2D culture systems.
AUTHOR Dalton, Paul D.
Title Melt electrowriting with additive manufacturing principles [Abstract]
Year 2017
Journal/Proceedings Current Opinion in Biomedical Engineering
Reftype
DOI/URL URL DOI
Abstract
Abstract The recent development of electrostatic writing (electrowriting) with molten jets provides an opportunity to tackle some significant challenges within tissue engineering. The process uses an applied voltage to generate a stable fluid jet with a predictable path, that is continuously deposited onto a collector. The fiber diameter is variable during the process, and is applicable to polymers with a history of clinical use. Melt electrowriting therefore has potential for clinical translation if the biological efficacy of the implant can be improved over existing gold standards. It provides a unique opportunity for laboratories to perform low-cost, high resolution, additive manufacturing research that is well positioned for clinical translation, using existing regulatory frameworks.
AUTHOR Ligon, Samuel Clark and Liska, Robert and Stampfl, Jürgen and Gurr, Matthias and Mülhaupt, Rolf
Title Polymers for 3D Printing and Customized Additive Manufacturing [Abstract]
Year 2017
Journal/Proceedings Chemical Reviews
Reftype
DOI/URL DOI
Abstract
Additive manufacturing (AM) alias 3D printing translates computer-aided design (CAD) virtual 3D models into physical objects. By digital slicing of CAD, 3D scan, or tomography data, AM builds objects layer by layer without the need for molds or machining. AM enables decentralized fabrication of customized objects on demand by exploiting digital information storage and retrieval via the Internet. The ongoing transition from rapid prototyping to rapid manufacturing prompts new challenges for mechanical engineers and materials scientists alike. Because polymers are by far the most utilized class of materials for AM, this Review focuses on polymer processing and the development of polymers and advanced polymer systems specifically for AM. AM techniques covered include vat photopolymerization (stereolithography), powder bed fusion (SLS), material and binder jetting (inkjet and aerosol 3D printing), sheet lamination (LOM), extrusion (FDM, 3D dispensing, 3D fiber deposition, and 3D plotting), and 3D bioprinting. The range of polymers used in AM encompasses thermoplastics, thermosets, elastomers, hydrogels, functional polymers, polymer blends, composites, and biological systems. Aspects of polymer design, additives, and processing parameters as they relate to enhancing build speed and improving accuracy, functionality, surface finish, stability, mechanical properties, and porosity are addressed. Selected applications demonstrate how polymer-based AM is being exploited in lightweight engineering, architecture, food processing, optics, energy technology, dentistry, drug delivery, and personalized medicine. Unparalleled by metals and ceramics, polymer-based AM plays a key role in the emerging AM of advanced multifunctional and multimaterial systems including living biological systems as well as life-like synthetic systems.
AUTHOR Paxton, Naomi Claire and Smolan, Willi and Böck, Thomas and Melchels, Ferry P. W. and Groll, Juergen and Juengst, Tomasz
Title Proposal to Assess Printability of Bioinks for Extrusion-Based Bioprinting and Evaluation of Rheological Properties Governing Bioprintability [Abstract]
Year 2017
Journal/Proceedings Biofabrication
Reftype
DOI/URL DOI
Abstract
Abstract The development and formulation of printable inks for extrusion-based 3D bioprinting has been a major challenge in the field of biofabrication. Inks, often polymer solutions with the addition of crosslinking to form hydrogels, must not only display adequate mechanical properties for the chosen application, but also show high biocompatibility as well as printability. Here we describe a reproducible two-step method for the assessment of the printability of inks for bioprinting, focussing firstly on screening ink formulations to assess fibre formation and the ability to form 3D constructs before presenting a method for the rheological evaluation of inks to characterise the yield point, shear thinning and recovery behaviour. In conjunction, a mathematical model was formulated to provide a theoretical understanding of the pressure-driven, shear thinning extrusion of inks through needles in a bioprinter. The assessment methods were trialled with a commercially-available crème, poloxamer 407, alginate-based inks and an alginate-gelatin composite material. Yield stress was investigated by applying a stress ramp to a number of inks, which demonstrated the necessity of high yield for printable materials. The shear thinning behaviour of the inks was then characterised by quantifying the degree of shear thinning and using the mathematical model to predict the window of printer operating parameters in which the materials could be printed. Furthermore, the model predicted high shear conditions and high residence times for cells at the walls of the needle and effects on cytocompatibility at different printing conditions. Finally, the ability of the materials to recover to their original viscosity after extrusion was examined using rotational recovery rheological measurements. Taken together, these assessment techniques revealed significant insights into the requirements for printable inks and shear conditions present during the extrusion process and allow the rapid and reproducible characterisation of a wide variety of inks for bioprinting.
AUTHOR DeSimone, Elise and Schacht, Kristin and Pellert, Alexandra and Scheibel, Thomas
Title Recombinant spider silk-based bioinks [Abstract]
Year 2017
Journal/Proceedings Biofabrication
Reftype
DOI/URL URL
Abstract
Bioinks, 3D cell culture systems which can be printed, are still in the early development stages. Currently, extensive research is going into designing printers to be more accommodating to bioinks, designing scaffolds with stiff materials as support structures for the often soft bioinks, and modifying the bioinks themselves. Recombinant spider silk proteins, a potential biomaterial component for bioinks, have high biocompatibility, can be processed into several morphologies and can be modified with cell adhesion motifs to enhance their bioactivity. In this work, thermally gelled hydrogels made from recombinant spider silk protein encapsulating mouse fibroblast cell line BALB/3T3 were prepared and characterized. The bioinks were evaluated for performance in vitro both before and after printing, and it was observed that unprinted bioinks provided a good platform for cell spreading and proliferation, while proliferation in printed scaffolds was prohibited. To improve the properties of the printed hydrogels, gelatin was given as an additive and thereby served indirectly as a plasticizer, improving the resolution of printed strands. Taken together, recombinant spider silk proteins and hydrogels made thereof show good potential as a bioink, warranting further development.
AUTHOR Reitmaier, Sandra and Kovtun, Anna and Schuelke, Julian and Kanter, Britta and Lemm, Madlin and Hoess, Andreas and Heinemann, Sascha and Nies, Berthold and Ignatius, Anita
Title Strontium(II) and mechanical loading additively augment bone formation in calcium phosphate scaffolds [Abstract]
Year 2017
Journal/Proceedings Journal of Orthopaedic Research
Reftype
DOI/URL DOI
Abstract
Calcium phosphate cements (CPCs) are widely used for bone-defect treatment. Current developments comprise the fabrication of porous scaffolds by three-dimensional plotting and doting using biologically active substances, such as strontium. Strontium is known to increase osteoblast activity and simultaneously to decrease osteoclast resorption. This study investigated the short- and long-term in vivo performances of strontium(II)-doted CPC (SrCPC) scaffolds compared to non-doted CPC scaffolds after implantation in unloaded or load-bearing trabecular bone defects in sheep. After 6 weeks, both CPC and SrCPC scaffolds exhibited good biocompatibility and osseointegration. Fluorochrome labeling revealed that both scaffolds were penetrated by newly formed bone already after 4 weeks. Neither strontium doting nor mechanical loading significantly influenced early bone formation. In contrast, after 6 months, bone formation was significantly enhanced in SrCPC compared to CPC scaffolds. Energy dispersive X-ray analysis demonstrated the release of strontium from the SrCPC into the bone. Strontium addition did not significantly influence material resorption or osteoclast formation. Mechanical loading significantly stimulated bone formation in both CPC and SrCPC scaffolds after 6 months without impairing scaffold integrity. The most bone was found in SrCPC scaffolds under load-bearing conditions. Concluding, these results demonstrate that strontium doting and mechanical loading additively stimulated bone formation in CPC scaffolds and that the scaffolds exhibited mechanical stability under moderate load, implying good clinical suitability. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res
AUTHOR Levato, Riccardo and Webb, William R. and Otto, Iris A. and Mensinga, Anneloes and Zhang, Yadan and van Rijen, Mattie and van Weeren, René and Khan, Ilyas M. and Malda, Jos
Title The bio in the ink: cartilage regeneration with bioprintable hydrogels and articular cartilage-derived progenitor cells
Year 2017
Journal/Proceedings Acta Biomaterialia
Reftype
DOI/URL URL
AUTHOR Bertlein, Sarah and Brown, Gabriella and Lim, Khoon and Jungst, Tomasz and Boeck, Thomas and Blunk, Torsten and Tessmar, Joerg and J. Hooper, Gary and Woodfield, Tim and Groll, Jürgen
Title Thiol-Ene Clickable Gelatin: A Platform Bioink for Multiple 3D Biofabrication Technologies [Abstract]
Year 2017
Journal/Proceedings Advanced Materials
Reftype
DOI/URL DOI
Abstract
Bioprinting can be defined as the art of combining materials and cells to fabricate designed, hierarchical 3D hybrid constructs. Suitable materials, so called bioinks, have to comply with challenging rheological processing demands and rapidly form a stable hydrogel postprinting in a cytocompatible manner. Gelatin is often adopted for this purpose, usually modified with (meth-)acryloyl functionalities for postfabrication curing by free radical photopolymerization, resulting in a hydrogel that is cross-linked via nondegradable polymer chains of uncontrolled length. The application of allylated gelatin (GelAGE) as a thiol-ene clickable bioink for distinct biofabrication applications is reported. Curing of this system occurs via dimerization and yields a network with flexible properties that offer a wider biofabrication window than (meth-)acryloyl chemistry, and without additional nondegradable components. An in-depth analysis of GelAGE synthesis is conducted, and standard UV-initiation is further compared with a recently described visible-light-initiator system for GelAGE hydrogel formation. It is demonstrated that GelAGE may serve as a platform bioink for several biofabrication technologies by fabricating constructs with high shape fidelity via lithography-based (digital light processing) 3D printing and extrusion-based 3D bioprinting, the latter supporting long-term viability postprinting of encapsulated chondrocytes.
AUTHOR Freeman, Fiona E. and Kelly, Daniel J.
Title Tuning Alginate Bioink Stiffness and Composition for Controlled Growth Factor Delivery and to Spatially Direct MSC Fate within Bioprinted Tissues [Abstract]
Year 2017
Journal/Proceedings Scientific Reports
Reftype Freeman2017
DOI/URL DOI
Abstract
Alginate is a commonly used bioink in 3D bioprinting. Matrix stiffness is a key determinant of mesenchymal stem cell (MSC) differentiation, suggesting that modulation of alginate bioink mechanical properties represents a promising strategy to spatially regulate MSC fate within bioprinted tissues. In this study, we define a printability window for alginate of differing molecular weight (MW) by systematically varying the ratio of alginate to ionic crosslinker within the bioink. We demonstrate that the MW of such alginate bioinks, as well as the choice of ionic crosslinker, can be tuned to control the mechanical properties (Young’s Modulus, Degradation Rate) of 3D printed constructs. These same factors are also shown to influence growth factor release from the bioinks. We next explored if spatially modulating the stiffness of 3D bioprinted hydrogels could be used to direct MSC fate inside printed tissues. Using the same alginate and crosslinker, but varying the crosslinking ratio, it is possible to bioprint constructs with spatially varying mechanical microenvironments. Moreover, these spatially varying microenvironments were found to have a significant effect on the fate of MSCs within the alginate bioinks, with stiffer regions of the bioprinted construct preferentially supporting osteogenesis over adipogenesis.
AUTHOR Abbadessa, Anna and Landín, Mariana and Oude Blenke, Erik and Hennink, Wim E. and Vermonden, Tina
Title Two-component thermosensitive hydrogels: Phase separation affecting rheological behavior [Abstract]
Year 2017
Journal/Proceedings European Polymer Journal
Reftype
DOI/URL URL
Abstract
Abstract Extracellular matrices are mainly composed of a mixture of different biopolymers and therefore the use of two or more building blocks for the development of tissue-mimicking hydrogels is nowadays an attractive strategy in tissue-engineering. Multi-component hydrogel systems may undergo phase separation, which in turn can lead to new, unexpected material properties. The aim of this study was to understand the role of phase separation on the mechanical properties and 3D printability of hydrogels composed of triblock copolymers of polyethylene glycol (PEG) and methacrylated poly(N-(2-hydroxypropyl) methacrylamide-mono/dilactate) (pHPMAlac) blended with methacrylated hyaluronic acid (HAMA). To this end, hydrogels composed of different concentrations of PEG/pHPMAlac and HAMA, were analyzed for phase behavior and rheological properties. Subsequently, phase separation and rheological behavior as function of the two polymer concentrations were mathematically processed to generate a predictive model. Results showed that PEG/pHPMAlac/HAMA hydrogels were characterized by hydrophilic, HAMA-richer internal domains dispersed in a more hydrophobic continuous phase, composed of PEG/pHPMAlac, and that the volume fraction of the dispersed phase increased by increasing HAMA concentration. Storage modulus, yield stress and viscosity increased with increasing HAMA concentration for low/medium HAMA contents (≤0.75% w/w), while a further increase of HAMA resulted in a decrease of the mentioned properties. On the other hand, by increasing the concentration of PEG/pHPMAlac these rheological properties were enhanced. The generated models showed a good fitting with experimental data, and were used to identify an exemplary 3D printability window for PEG/pHPMAlac/HAMA hydrogels, which was verified by rheological characterization and preparation of 3D printed scaffolds. In conclusion, a clear relationship between phase separation and rheological behavior in these two-component hydrogels can be described by complex functions of the two polymer concentrations. The predictive model generated in this study can be used as a valid tool for the identification of hydrogel compositions with desired, selected characteristics.
AUTHOR Gu, Bon Kang and Choi, Dong Jin and Park, Sang Jun and Kim, Min Sup and Kang, Chang Mo and Kim, Chun-Ho
Title 3-dimensional bioprinting for tissue engineering applications [Abstract]
Year 2016
Journal/Proceedings Biomaterials Research
Reftype
DOI/URL DOI
Abstract
The 3-dimensional (3D) printing technologies, referred to as additive manufacturing (AM) or rapid prototyping (RP), have acquired reputation over the past few years for art, architectural modeling, lightweight machines, and tissue engineering applications. Among these applications, tissue engineering field using 3D printing has attracted the attention from many researchers. 3D bioprinting has an advantage in the manufacture of a scaffold for tissue engineering applications, because of rapid-fabrication, high-precision, and customized-production, etc. In this review, we will introduce the principles and the current state of the 3D bioprinting methods. Focusing on some of studies that are being current application for biomedical and tissue engineering fields using printed 3D scaffolds.
AUTHOR Daly, Andrew C. and Cunniffe, Gr{'{a}}inne M. and Sathy, Binulal N. and Jeon, Oju and Alsberg, Eben and Kelly, Daniel J.
Title 3D Bioprinting of Developmentally Inspired Templates for Whole Bone Organ Engineering [Abstract]
Year 2016
Journal/Proceedings Advanced Healthcare Materials
Reftype
DOI/URL DOI
Abstract
The ability to print defined patterns of cells and extracellular-matrix components in three dimensions has enabled the engineering of simple biological tissues; however, bioprinting functional solid organs is beyond the capabilities of current biofabrication technologies. An alternative approach would be to bioprint the developmental precursor to an adult organ, using this engineered rudiment as a template for subsequent organogenesis in vivo. This study demonstrates that developmentally inspired hypertrophic cartilage templates can be engineered in vitro using stem cells within a supporting gamma-irradiated alginate bioink incorporating Arg-Gly-Asp adhesion peptides. Furthermore, these soft tissue templates can be reinforced with a network of printed polycaprolactone fibers, resulting in a ≈350 fold increase in construct compressive modulus providing the necessary stiffness to implant such immature cartilaginous rudiments into load bearing locations. As a proof-of-principal, multiple-tool biofabrication is used to engineer a mechanically reinforced cartilaginous template mimicking the geometry of a vertebral body, which in vivo supported the development of a vascularized bone organ containing trabecular-like endochondral bone with a supporting marrow structure. Such developmental engineering approaches could be applied to the biofabrication of other solid organs by bioprinting precursors that have the capacity to mature into their adult counterparts over time in vivo.
AUTHOR {{'{A}}}vila, H{'{e}}ctor Mart{'{i}}nez and Schwarz, Silke and Rotter, Nicole and Gatenholm, Paul
Title 3D bioprinting of human chondrocyte-laden nanocellulose hydrogels for patient-specific auricular cartilage regeneration [Abstract]
Year 2016
Journal/Proceedings Bioprinting
Reftype
DOI/URL URL DOI
Abstract
Abstract Auricular cartilage tissue engineering (TE) aims to provide an effective treatment for patients with acquired or congenital auricular defects. Bioprinting has gained attention in several {TE} strategies for its ability to spatially control the placement of cells, biomaterials and biological molecules. Although considerable advances have been made to bioprint complex 3D tissue analogues, the development of hydrogel bioinks with good printability and bioactive properties must improve in order to advance the translation of 3D bioprinting into the clinic. In this study, the biological functionality of a bioink composed of nanofibrillated cellulose and alginate (NFC-A) is extensively evaluated for auricular cartilage TE. 3D bioprinted auricular constructs laden with human nasal chondrocytes (hNC) are cultured for up to 28 days and the redifferentiation capacity of hNCs in NFC-A is studied on gene expression as well as on protein levels. 3D bioprinting with NFC-A bioink facilitates the biofabrication of cell-laden, patient-specific auricular constructs with an open inner structure, high cell density and homogenous cell distribution. The cell-laden NFC-A constructs exhibit an excellent shape and size stability as well as an increase in cell viability and proliferation during in vitro culture. Furthermore, NFC-A bioink supports the redifferentiation of hNCs and neo-synthesis of cartilage-specific extracellular matrix components. This demonstrated that NFC-A bioink supports redifferentiation of hNCs while offering proper printability in a biologically relevant aqueous 3D environment, making it a promising tool for auricular cartilage {TE} and many other biomedical applications.
AUTHOR Raphael, Bella and Khalil, Tony and Workman, Victoria L. and Smith, Andrew and Brown, Cameron P. and Streulli, Charles and Saiani, Alberto and Domingos, Marco
Title 3D cell bioprinting of self-assembling peptide-based hydrogels [Abstract]
Year 2016
Journal/Proceedings Materials Letters
Reftype
DOI/URL URL DOI
Abstract
Abstract Bioprinting of 3D cell-laden constructs with well-defined architectures and controlled spatial distribution of cells is gaining importance in the field of Tissue Engineering. New 3D tissue models are being developed to study the complex cellular interactions that take place during both tissue development and in the regeneration of damaged and/or diseased tissues. Despite advances in 3D printing technologies, suitable hydrogels or 'bioinks' with enhanced printability and cell viability are lacking. Here we report a study on the 3D bioprinting of a novel group of self-assembling peptide-based hydrogels. Our results demonstrate the ability of the system to print well-defined 3D cell laden constructs with variable stiffness and improved structural integrity, whilst providing a cell-friendly extracellular matrix “like” microenvironment. Biological assays reveal that mammary epithelial cells remain viable after 7 days of in vitro culture, independent of the hydrogel stiffness.
AUTHOR Minas, Clara and Carnelli, Davide and Tervoort, Elena and Studart, André R.
Title 3D Printing of Emulsions and Foams into Hierarchical Porous Ceramics [Abstract]
Year 2016
Journal/Proceedings Advanced Materials
Reftype
DOI/URL DOI
Abstract
Bulk hierarchical porous ceramics with unprecedented strength-to-weight ratio and tunable pore sizes across three different length scales are printed by direct ink writing. Such an extrusion-based process relies on the formulation of inks in the form of particle-stabilized emulsions and foams that are sufficiently stable to resist coalescence during printing.
AUTHOR Sommer, Marianne R. and Schaffner, Manuel and Carnelli, Davide and Studart, André R.
Title 3D Printing of Hierarchical Silk Fibroin Structures [Abstract]
Year 2016
Journal/Proceedings ACS Applied Materials and Interfaces
Reftype
DOI/URL DOI
Abstract
Like many other natural materials, silk is hierarchically structured from the amino acid level up to the cocoon or spider web macroscopic structures. Despite being used industrially in a number of applications, hierarchically structured silk fibroin objects with a similar degree of architectural control as in natural structures have not been produced yet due to limitations in fabrication processes. In a combined top-down and bottom-up approach, we exploit the freedom in macroscopic design offered by 3D printing and the template-guided assembly of ink building blocks at the meso- and nanolevel to fabricate hierarchical silk porous materials with unprecedented structural control. Pores with tunable sizes in the range 40–350 μm are generated by adding sacrificial organic microparticles as templates to a silk fibroin-based ink. Commercially available wax particles or monodisperse polycaprolactone made by microfluidics can be used as microparticle templates. Since closed pores are generated after template removal, an ultrasonication treatment can optionally be used to achieve open porosity. Such pore templating particles can be further modified with nanoparticles to create a hierarchical template that results in porous structures with a defined nanotopography on the pore walls. The hierarchically porous silk structures obtained with this processing technique can potentially be utilized in various application fields from structural materials to thermal insulation to tissue engineering scaffolds.
AUTHOR Daly, Andrew C. and Critchley, Susan E. and Rencsok, Emily M. and Kelly, Daniel J.
Title A comparison of different bioinks for 3D bioprinting of fibrocartilage and hyaline cartilage [Abstract]
Year 2016
Journal/Proceedings Biofabrication
Reftype
DOI/URL URL
Abstract
Cartilage is a dense connective tissue with limited self-repair capabilities. Mesenchymal stem cell (MSC) laden hydrogels are commonly used for fibrocartilage and articular cartilage tissue engineering, however they typically lack the mechanical integrity for implantation into high load bearing environments. This has led to increased interested in 3D bioprinting of cell laden hydrogel bioinks reinforced with stiffer polymer fibres. The objective of this study was to compare a range of commonly used hydrogel bioinks (agarose, alginate, GelMA and BioINK™) for their printing properties and capacity to support the development of either hyaline cartilage or fibrocartilage in vitro . Each hydrogel was seeded with MSCs, cultured for 28 days in the presence of TGF- β 3 and then analysed for markers indicative of differentiation towards either a fibrocartilaginous or hyaline cartilage-like phenotype. Alginate and agarose hydrogels best supported the development of hyaline-like cartilage, as evident by the development of a tissue staining predominantly for type II collagen. In contrast, GelMA and BioINK ™ (a PEGMA based hydrogel) supported the development of a more fibrocartilage-like tissue, as evident by the development of a tissue containing both type I and type II collagen. GelMA demonstrated superior printability, generating structures with greater fidelity, followed by the alginate and agarose bioinks. High levels of MSC viability were observed in all bioinks post-printing (∼80%). Finally we demonstrate that it is possible to engineer mechanically reinforced hydrogels with high cell viability by co-depositing a hydrogel bioink with polycaprolactone filaments, generating composites with bulk compressive moduli comparable to articular cartilage. This study demonstrates the importance of the choice of bioink when bioprinting different cartilaginous tissues for musculoskeletal applications.
AUTHOR Gudapati, Hemanth and Dey, Madhuri and Ozbolat, Ibrahim
Title A comprehensive review on droplet-based bioprinting: Past, present and future. [Abstract]
Year 2016
Journal/Proceedings Biomaterials
Reftype
DOI/URL DOI
Abstract
Droplet-based bioprinting (DBB) offers greater advantages due to its simplicity and agility with precise control on deposition of biologics including cells, growth factors, genes, drugs and biomaterials, and has been a prominent technology in the bioprinting community. Due to its immense versatility, DBB technology has been adopted by various application areas, including but not limited to, tissue engineering and regenerative medicine, transplantation and clinics, pharmaceutics and high-throughput screening, and cancer research. Despite the great benefits, the technology currently faces several challenges such as a narrow range of available bioink materials, bioprinting-induced cell damage at substantial levels, limited mechanical and structural integrity of bioprinted constructs, and restrictions on the size of constructs due to lack of vascularization and porosity. This paper presents a first-time review of DBB and comprehensively covers the existing DBB modalities including inkjet, electrohydrodynamic, acoustic, and micro-valve bioprinting. The recent notable studies are highlighted, the relevant bioink biomaterials and bioprinters are expounded, the application areas are presented, and the future prospects are provided to the reader.
AUTHOR Suntornnond, Ratima and Tan, Edgar Yong Sheng and An, Jia and Chua, Chee Kai
Title A Mathematical Model on the Resolution of Extrusion Bioprinting for the Development of New Bioinks [Abstract]
Year 2016
Journal/Proceedings Materials
Reftype
DOI/URL URL DOI
Abstract
Pneumatic extrusion-based bioprinting is a recent and interesting technology that is very useful for biomedical applications. However, many process parameters in the bioprinter need to be fully understood in order to print at an adequate resolution. In this paper, a simple yet accurate mathematical model to predict the printed width of a continuous hydrogel line is proposed, in which the resolution is expressed as a function of nozzle size, pressure, and printing speed. A thermo-responsive hydrogel, pluronic F127, is used to validate the model predictions. This model could provide a platform for future correlation studies on pneumatic extrusion-based bioprinting as well as for developing new bioink formulations.
AUTHOR Sears, Nick A. and Seshadri, Dhruv R. and Dhavalikar, Prachi S. and Cosgriff-Hernandez, Elizabeth
Title A Review of Three-Dimensional Printing in Tissue Engineering [Abstract]
Year 2016
Journal/Proceedings Tissue Engineering Part B: Reviews
Reftype
DOI/URL DOI
Abstract
Recent advances in three-dimensional (3D) printing technologies have led to a rapid expansion of applications from the creation of anatomical training models for complex surgical procedures to the printing of tissue engineering constructs. In addition to achieving the macroscale geometry of organs and tissues, a print layer thickness as small as 20 mm allows for reproduction of the microarchitectures of bone and other tissues. Techniques with even higher precision are currently being investigated to enable reproduction of smaller tissue features such as hepatic lobules. Current research in tissue engineering focuses on the development of compatible methods (printers) and materials (bioinks) that are capable of producing biomimetic scaffolds. In this review, an overview of current 3D printing techniques used in tissue engineering is provided with an emphasis on the printing mechanism and the resultant scaffold characteristics. Current practical challenges and technical limitations are emphasized and future trends of bioprinting are discussed.
AUTHOR Abbadessa, Anna and Mouser, Vivian H. M. and Blokzijl, Maarten M. and Gawlitta, Debby and Dhert, Wouter J. A. and Hennink, Wim E. and Malda, Jos and Vermonden, Tina
Title A Synthetic Thermosensitive Hydrogel for Cartilage Bioprinting and Its Biofunctionalization with Polysaccharides [Abstract]
Year 2016
Journal/Proceedings Biomacromolecules
Reftype
DOI/URL DOI
Abstract
Hydrogels based on triblock copolymers of polyethylene glycol and partially methacrylated poly[N-(2-hydroxypropyl) methacrylamide mono/dilactate] make up an attractive class of biomaterials because of their biodegradability, cytocompatibility, and tunable thermoresponsive and mechanical properties. If these properties are fine-tuned, the hydrogels can be three-dimensionally bioprinted, to generate, for instance, constructs for cartilage repair. This study investigated whether hydrogels based on the polymer mentioned above with a 10% degree of methacrylation (M10P10) support cartilage formation by chondrocytes and whether the incorporation of methacrylated chondroitin sulfate (CSMA) or methacrylated hyaluronic acid (HAMA) can improve the mechanical properties, long-term stability, and printability. Chondrocyte-laden M10P10 hydrogels were cultured for 42 days to evaluate chondrogenesis. M10P10 hydrogels with or without polysaccharides were evaluated for their mechanical properties (before and after UV photo-cross-linking), degradation kinetics, and printability. Extensive cartilage matrix production occurred in M10P10 hydrogels, highlighting their potential for cartilage repair strategies. The incorporation of polysaccharides increased the storage modulus of polymer mixtures and decreased the degradation kinetics in cross-linked hydrogels. Addition of HAMA to M10P10 hydrogels improved printability and resulted in three-dimensional constructs with excellent cell viability. Hence, this novel combination of M10P10 with HAMA forms an interesting class of hydrogels for cartilage bioprinting.
AUTHOR Abbadessa, A. and Blokzijl, M. M. and Mouser, V. H. M. and Marica, P. and Malda, J. and Hennink, W. E. and Vermonden, T.
Title A thermo-responsive and photo-polymerizable chondroitin sulfate-based hydrogel for 3D printing applications [Abstract]
Year 2016
Journal/Proceedings Carbohydrate Polymers
Reftype
DOI/URL URL DOI
Abstract
Abstract The aim of this study was to design a hydrogel system based on methacrylated chondroitin sulfate (CSMA) and a thermo-sensitive poly(N-(2-hydroxypropyl) methacrylamide-mono/dilactate)-polyethylene glycol triblock copolymer (M15P10) as a suitable material for additive manufacturing of scaffolds. {CSMA} was synthesized by reaction of chondroitin sulfate with glycidyl methacrylate (GMA) in dimethylsulfoxide at 50 °C and its degree of methacrylation was tunable up to 48.5%, by changing reaction time and {GMA} feed. Unlike polymer solutions composed of {CSMA} alone (20% w/w), mixtures based on 2% w/w of {CSMA} and 18% of {M15P10} showed strain-softening, thermo-sensitive and shear-thinning properties more pronounced than those found for polymer solutions based on {M15P10} alone. Additionally, they displayed a yield stress of 19.2 ± 7.0 Pa. The 3D printing of this hydrogel resulted in the generation of constructs with tailorable porosity and good handling properties. Finally, embedded chondrogenic cells remained viable and proliferating over a culture period of 6 days. The hydrogel described herein represents a promising biomaterial for cartilage 3D printing applications.
AUTHOR Visscher, Dafydd O. and Farré-Guasch, Elisabet and Helder, Marco N. and Gibbs, Susan and Forouzanfar, Tymour and van Zuijlen, Paul P. and Wolff, Jan
Title Advances in Bioprinting Technologies for Craniofacial Reconstruction [Abstract]
Year 2016
Journal/Proceedings Trends in Biotechnology
Reftype
DOI/URL DOI
Abstract
Recent developments in craniofacial reconstruction have shown important advances in both the materials and methods used. While autogenous tissue is still considered to be the gold standard for these reconstructions, the harvesting procedure remains tedious and in many cases causes significant donor site morbidity. These limitations have subsequently led to the development of less invasive techniques such as 3D bioprinting that could offer possibilities to manufacture patient-tailored bioactive tissue constructs for craniofacial reconstruction. Here, we discuss the current technological and (pre)clinical advances of 3D bioprinting for use in craniofacial reconstruction and highlight the challenges that need to be addressed in the coming years. Recent developments in craniofacial reconstruction have shown important advances in both the materials and methods used. While autogenous tissue is still considered to be the gold standard for these reconstructions, the harvesting procedure remains tedious and in many cases causes significant donor site morbidity. These limitations have subsequently led to the development of less invasive techniques such as 3D bioprinting that could offer possibilities to manufacture patient-tailored bioactive tissue constructs for craniofacial reconstruction. Here, we discuss the current technological and (pre)clinical advances of 3D bioprinting for use in craniofacial reconstruction and highlight the challenges that need to be addressed in the coming years.
AUTHOR M{"u}ller, Michael and {"O}zt{"u}rk, Ece and Arlov, {O}ystein and Gatenholm, Paul and Zenobi-Wong, Marcy
Title Alginate Sulfate--Nanocellulose Bioinks for Cartilage Bioprinting Applications [Abstract]
Year 2016
Journal/Proceedings Annals of Biomedical Engineering
Reftype
DOI/URL DOI
Abstract
One of the challenges of bioprinting is to identify bioinks which support cell growth, tissue maturation, and ultimately the formation of functional grafts for use in regenerative medicine. The influence of this new biofabrication technology on biology of living cells, however, is still being evaluated. Recently we have identified a mitogenic hydrogel system based on alginate sulfate which potently supports chondrocyte phenotype, but is not printable due to its rheological properties (no yield point). To convert alginate sulfate to a printable bioink, it was combined with nanocellulose, which has been shown to possess very good printability. The alginate sulfate/nanocellulose ink showed good printing properties and the non-printed bioink material promoted cell spreading, proliferation, and collagen II synthesis by the encapsulated cells. When the bioink was printed, the biological performance of the cells was highly dependent on the nozzle geometry. Cell spreading properties were maintained with the lowest extrusion pressure and shear stress. However, extruding the alginate sulfate/nanocellulose bioink and chondrocytes significantly compromised cell proliferation, particularly when using small diameter nozzles and valves.
AUTHOR Ozbolat, Ibrahim T. and Peng, Weijie and Ozbolat, Veli
Title Application areas of 3D bioprinting [Abstract]
Year 2016
Journal/Proceedings Drug Discovery Today
Reftype
DOI/URL URL DOI
Abstract
Three dimensional (3D) bioprinting has been a powerful tool in patterning and precisely placing biologics, including living cells, nucleic acids, drug particles, proteins and growth factors, to recapitulate tissue anatomy, biology and physiology. Since the first time of cytoscribing cells demonstrated in 1986, bioprinting has made a substantial leap forward, particularly in the past 10 years, and it has been widely used in fabrication of living tissues for various application areas. The technology has been recently commercialized by several emerging businesses, and bioprinters and bioprinted tissues have gained significant interest in medicine and pharmaceutics. This Keynote review presents the bioprinting technology and covers a first-time comprehensive overview of its application areas from tissue engineering and regenerative medicine to pharmaceutics and cancer research.
AUTHOR H{"{o}}lzl, Katja and Lin, Shengmao and Tytgat, Liesbeth and Vlierberghe, Sandra Van and Gu, Linxia and Ovsianikov, Aleksandr
Title Bioink properties before, during and after 3D bioprinting [Abstract]
Year 2016
Journal/Proceedings Biofabrication
Reftype
DOI/URL URL
Abstract
Bioprinting is a process based on additive manufacturing from materials containing living cells. These materials, often referred to as bioink, are based on cytocompatible hydrogel precursor formulations, which gel in a manner compatible with different bioprinting approaches. The bioink properties before, during and after gelation are essential for its printability, comprising such features as achievable structural resolution, shape fidelity and cell survival. However, it is the final properties of the matured bioprinted tissue construct that are crucial for the end application. During tissue formation these properties are influenced by the amount of cells present in the construct, their proliferation, migration and interaction with the material. A calibrated computational framework is able to predict the tissue development and maturation and to optimize the bioprinting input parameters such as the starting material, the initial cell loading and the construct geometry. In this contribution relevant bioink properties are reviewed and discussed on the example of most popular bioprinting approaches. The effect of cells on hydrogel processing and vice versa is highlighted. Furthermore, numerical approaches were reviewed and implemented for depicting the cellular mechanics within the hydrogel as well as for prediction of mechanical properties to achieve the desired hydrogel construct considering cell density, distribution and material–cell interaction.
AUTHOR Wu, Changsheng and Wang, Ben and Zhang, Chuck and Wysk, Richard A. and Chen, Yi-Wen
Title Bioprinting: an assessment based on manufacturing readiness levels [Abstract]
Year 2016
Journal/Proceedings Critical Reviews in Biotechnology
Reftype
DOI/URL DOI
Abstract
AbstractOver the last decade, bioprinting has emerged as a promising technology in the fields of tissue engineering and regenerative medicine. With recent advances in additive manufacturing, bioprinting is poised to provide patient-specific therapies and new approaches for tissue and organ studies, drug discoveries and even food manufacturing. Manufacturing Readiness Level (MRL) is a method that has been applied to assess manufacturing maturity and to identify risks and gaps in technology-manufacturing transitions. Technology Readiness Level (TRL) is used to evaluate the maturity of a technology. This paper reviews recent advances in bioprinting following the MRL scheme and addresses corresponding MRL levels of engineering challenges and gaps associated with the translation of bioprinting from lab-bench experiments to ultimate full-scale manufacturing of tissues and organs. According to our step-by-step TRL and MRL assessment, after years of rigorous investigation by the biotechnology community, bioprinting is on the cusp of entering the translational phase where laboratory research practices can be scaled up into manufacturing products specifically designed for individual patients.
AUTHOR Visscher, Dafydd O. and Bos, Ernst J. and Peeters, Mirte and Kuzmin, Nikolay V. and Groot, Marie Louise and Helder, Marco N. and van Zuijlen, Paul P. M.
Title Cartilage Tissue Engineering: Preventing Tissue Scaffold Contraction Using a 3D-Printed Polymeric Cage. [Abstract]
Year 2016
Journal/Proceedings Tissue engineering Part C: Methods
Reftype
DOI/URL DOI
Abstract
Scaffold contraction is a common but underestimated problem in the field of tissue engineering. It becomes particularly problematic when creating anatomically complex shapes such as the ear. The aim of this study was to develop a contraction-free biocompatible scaffold construct for ear cartilage tissue engineering. To address this aim, we used three constructs: (i) a fibrin/hyaluronic acid (FB/HA) hydrogel, (ii) a FB/HA hydrogel combined with a collagen I/III scaffold, and (iii) a cage construct containing (ii) surrounded by a 3D-printed poly-varepsilon-caprolactone mold. A wide range of different cell types were tested within these constructs, including chondrocytes, perichondrocytes, adipose-derived mesenchymal stem cells, and their combinations. After in vitro culturing for 1, 14, and 28 days, all constructs were analyzed. Macroscopic observation showed severe contraction of the cell-seeded hydrogel (i). This could be prevented, in part, by combining the hydrogel with the collagen scaffold (ii) and prevented in total using the 3D-printed cage construct (iii). (Immuno)histological analysis, multiphoton laser scanning microscopy, and biomechanical analysis showed extracellular matrix deposition and increased Young's modulus and thereby the feasibility of ear cartilage engineering. These results demonstrated that the 3D-printed cage construct is an adequate model for contraction-free ear cartilage engineering using a range of cell combinations.
AUTHOR Caetano, Guilherme and Violante, Ricardo and Sant{'{}}Ana, Ana Beatriz and Murashima, Adriana Batista and Domingos, Marco and Gibson, Andrew and B{'{a}}rtolo, Paulo and Frade, Marco Andrey
Title Cellularized versus decellularized scaffolds for bone regeneration [Abstract]
Year 2016
Journal/Proceedings Materials Letters
Reftype
DOI/URL URL DOI
Abstract
Abstract An optimal scaffold based strategy for in vivo repair of large bone defects and its associated problems is presented in this work. Three polymeric scaffolds produced by using an extrusion-based additive manufacturing system were examined in a rat critical bone defect model: scaffolds without cells, with undifferentiated Adipose-derived mesenchymal stem cells (ADSCs) and differentiated {ADSCs} (osteoblasts). Scaffolds with undifferentiated cells seem to be the best strategy as they exhibited around 22% more bone formation than natural bone healing, and around 15% more than the two other cases. Authors observed that scaffolds enabled cell migration and tissue formation. Results suggest that undifferentiated {ADSCs} strongly contribute to new bone formation with no rejection if scaffolds are used to support cell migration, proliferation and differentiation. Our long-term goal is to engineer high-quality cell seeded-scaffolds (autograft and allograft) for bone regeneration, mainly in elderly patients.
AUTHOR Ruiz-Cantu, Laura and Gleadall, Andrew and Faris, Callum and Segal, Joel and Shakesheff, Kevin and Yang, Jing
Title Characterisation of the surface structure of 3D printed scaffolds for cell infiltration and surgical suturing [Abstract]
Year 2016
Journal/Proceedings Biofabrication
Reftype
DOI/URL URL
Abstract
3D printing is of great interest for tissue engineering scaffolds due to the ability to form complex geometries and control internal structures, including porosity and pore size. The porous structure of scaffolds plays an important role in cell ingrowth and nutrition infusion. Although the internal porosity and pore size of 3D printed scaffolds have been frequently studied, the surface porosity and pore size, which are critical for cell infiltration and mass transport, have not been investigated. The surface geometry can differ considerably from the internal scaffold structure depending on the 3D printing process. It is vital to be able to control the surface geometry of scaffolds as well as the internal structure to fabricate optimal architectures. This work presents a method to control the surface porosity and pore size of 3D printed scaffolds. Six scaffold designs have been printed with surface porosities ranging from 3% to 21%. We have characterised the overall scaffold porosity and surface porosity using optical microscopy and microCT. It has been found that surface porosity has a significant impact on cell infiltration and proliferation. In addition, the porosity of the surface has been found to have an effect on mechanical properties and on the forces required to penetrate the scaffold with a surgical suturing needle. To the authors’ knowledge, this study is the first to investigate the surface geometry of extrusion-based 3D printed scaffolds and demonstrates the importance of surface geometry in cell infiltration and clinical manipulation.
AUTHOR Ozbolat, Ibrahim T. and Hospodiuk, Monika
Title Current advances and future perspectives in extrusion-based bioprinting [Abstract]
Year 2016
Journal/Proceedings Biomaterials
Reftype
DOI/URL URL DOI
Abstract
Abstract Extrusion-based bioprinting (EBB) is a rapidly growing technology that has made substantial progress during the last decade. It has great versatility in printing various biologics, including cells, tissues, tissue constructs, organ modules and microfluidic devices, in applications from basic research and pharmaceutics to clinics. Despite the great benefits and flexibility in printing a wide range of bioinks, including tissue spheroids, tissue strands, cell pellets, decellularized matrix components, micro-carriers and cell-laden hydrogels, the technology currently faces several limitations and challenges. These include impediments to organ fabrication, the limited resolution of printed features, the need for advanced bioprinting solutions to transition the technology bench to bedside, the necessity of new bioink development for rapid, safe and sustainable delivery of cells in a biomimetically organized microenvironment, and regulatory concerns to transform the technology into a product. This paper, presenting a first-time comprehensive review of EBB, discusses the current advancements in {EBB} technology and highlights future directions to transform the technology to generate viable end products for tissue engineering and regenerative medicine.
AUTHOR Ozbolat, Ibrahim T. and Moncal, Kazim K. and Gudapati, Hemanth
Title Evaluation of bioprinter technologies [Abstract]
Year 2016
Journal/Proceedings Additive Manufacturing
Reftype
DOI/URL URL DOI
Abstract
Abstract Since the first printing of biologics with cytoscribing as demonstrated by Klebe in 1986, three dimensional (3D) bioprinting has made a substantial leap forward, particularly in the last decade. It has been widely used in fabrication of living tissues for various application areas such as tissue engineering and regenerative medicine research, transplantation and clinics, pharmaceutics and high-throughput screening, and cancer research. As bioprinting has gained interest in the medical and pharmaceutical communities, the demand for bioprinters has risen substantially. A myriad of bioprinters have been developed at research institutions worldwide and several companies have emerged to commercialize advanced bioprinter technologies. This paper prefaces the evolution of the field of bioprinting and presents the first comprehensive review of existing bioprinter technologies. Here, a comparative evaluation is performed for bioprinters; limitations with the current bioprinter technologies are discussed thoroughly and future prospects of bioprinters are provided to the reader.
AUTHOR Passamai, V. E. and Dernowsek, J. A. and Nogueira, J. and Lara, V. and Vilalba, F. and Mironov, V. A. and Rezende, R. A. and da Silva, J. V.
Title From 3D Bioprinters to a fully integrated Organ Biofabrication Line [Abstract]
Year 2016
Journal/Proceedings Journal of Physics: Conference Series
Reftype
DOI/URL URL
Abstract
About 30 years ago, the 3D printing technique appeared. From that time on, engineers in medical science field started to look at 3D printing as a partner. Firstly, biocompatible and biodegradable 3D structures for cell seeding called “scaffolds” were fabricated for in vitro and in vivo animal trials. The advances proved to be of great importance, but, the use of scaffolds faces some limitations, such as low homogeneity and low density of cell aggregates. In the last decade, 3D bioprinting technology emerged as a promising approach to overcome these limitations and as one potential solution to the challenge of organ fabrication, to obtain very similar 3D human tissues, not only for transplantation, but also for drug discovery, disease research and to decrease the usage of animals in laboratory experimentation. 3D bioprinting allowed the fabrication of 3D alive structures with higher and controllable cell density and homogeneity. Other advantage of biofabrication is that the tissue constructs are solid scaffold-free. This paper presents the 3D bioprinting technology; equipment development, stages and components of a complex Organ Bioprinting Line (OBL) and the importance of developing a Virtual OBL.
AUTHOR Kesti, Matti and Fisch, Philipp and Pensalfini, Marco and Mazza, Edoardo and Zenobi-Wong, Marcy
Title Guidelines for standardization of bioprinting: a systematic study of process parameters and their effect on bioprinted structures [Abstract]
Year 2016
Journal/Proceedings BioNanoMaterials
Reftype
DOI/URL DOI
Abstract
Biofabrication techniques including three-dimensional bioprinting could be used one day to fabricate living, patient-specific tissues and organs for use in regenerative medicine. Compared to traditional casting and molding methods, bioprinted structures can be much more complex, containing for example multiple materials and cell types in controlled spatial arrangement, engineered porosity, reinforcement structures and gradients in mechanical properties. With this complexity and increased function, however, comes the necessity to develop guidelines to standardize the bioprinting process, so printed grafts can safely enter the clinics. The bioink material must firstly fulfil requirements for biocompatibility and flow. Secondly, it is important to understand how process parameters affect the final mechanical properties of the printed graft. Using a gellan-alginate physically crosslinked bioink as an example, we show shear thinning and shear recovery properties which allow good printing resolution. Printed tensile specimens were used to systematically assess effect of line spacing, printing direction and crosslinking conditions. This standardized testing allowed direct comparison between this bioink and three commercially-available products. Bioprinting is a promising, yet complex fabrication method whose outcome is sensitive to a range of process parameters. This study provides the foundation for highly needed best practice guidelines for reproducible and safe bioprinted grafts.
AUTHOR Melchels, Ferry P. W. and Blokzijl, Maarten M. and Levato, Riccardo and Peiffer, Quentin C. and de Ruijter, Myl{`{e}}ne and Hennink, Wim E. and Vermonden, Tina and Malda, Jos
Title Hydrogel-based reinforcement of 3D bioprinted constructs [Abstract]
Year 2016
Journal/Proceedings Biofabrication
Reftype
DOI/URL URL
Abstract
Progress within the field of biofabrication is hindered by a lack of suitable hydrogel formulations. Here, we present a novel approach based on a hybrid printing technique to create cellularized 3D printed constructs. The hybrid bioprinting strategy combines a reinforcing gel for mechanical support with a bioink to provide a cytocompatible environment. In comparison with thermoplastics such as IMG [http://ej.iop.org/images/1758-5090/8/3/035004/bfaa2f97ieqn1.gif] {$epsilon $} -polycaprolactone, the hydrogel-based reinforcing gel platform enables printing at cell-friendly temperatures, targets the bioprinting of softer tissues and allows for improved control over degradation kinetics. We prepared amphiphilic macromonomers based on poloxamer that form hydrolysable, covalently cross-linked polymer networks. Dissolved at a concentration of 28.6%w/w in water, it functions as reinforcing gel, while a 5%w/w gelatin-methacryloyl based gel is utilized as bioink. This strategy allows for the creation of complex structures, where the bioink provides a cytocompatible environment for encapsulated cells. Cell viability of equine chondrocytes encapsulated within printed constructs remained largely unaffected by the printing process. The versatility of the system is further demonstrated by the ability to tune the stiffness of printed constructs between 138 and 263 kPa, as well as to tailor the degradation kinetics of the reinforcing gel from several weeks up to more than a year.
AUTHOR Carrel, Jean‐Pierre and Wiskott, Anselm and Scherrer, Susanne and Durual, Stéphane
Title Large Bone Vertical Augmentation Using a Three‐Dimensional Printed TCP/HA Bone Graft: A Pilot Study in Dog Mandible [Abstract]
Year 2016
Journal/Proceedings Clinical Implant Dentistry and Related Research
Reftype
DOI/URL DOI
Abstract
Abstract Background Osteoflux is a three‐dimensional printed calcium phosphate porous structure for oral bone augmentation. It is a mechanically stable scaffold with a well‐defined interconnectivity and can be readily shaped to conform to the bone bed's morphology. Purpose An animal experiment is reported whose aim was to assess the performance and safety of the scaffold in promoting vertical growth of cortical bone in the mandible. Materials and methods Four three‐dimensional blocks (10 mm length, 5 mm width, 5 mm height) were affixed to edentulous segments of the dog's mandible and covered by a collagen membrane. During bone bed preparation, particular attention was paid not to create defects 0.5 mm or more so that the real potential of the three‐dimensional block in driving vertical bone growth can be assessed. Histomorphometric analyses were performed after 8 weeks. Results At 8 weeks, the three‐dimensional blocks led to substantial vertical bone growth up to 4.5 mm from the bone bed. Between 0 and 1 mm in height, 44% of the surface was filled with new bone, at 1 to 3 mm it was 20% to 35%, 18% at 3 to 4, and ca. 6% beyond 4 mm. New bone was evenly distributed along in mesio‐distal direction and formed a new crest contour in harmony with the natural mandibular shape. Conclusions After two months of healing, the three‐dimensional printed blocks conducted new bone growth above its natural bed, up to 4.5 mm in a canine mandibular model. Furthermore, the new bone was evenly distributed in height and density along the block. These results are very promising and need to be further evaluated by a complete powerful study using the same model.
AUTHOR Hou, Xiaochun and Liu, Shiying and Wang, Min and Wiraja, Christian and Huang, Wei and Chan, Peggy and Tan, Timothy and Xu, Chenjie
Title Layer-by-Layer 3D Constructs of Fibroblasts in Hydrogel for Examining Transdermal Penetration Capability of Nanoparticles [Abstract]
Year 2016
Journal/Proceedings Journal of Laboratory Automation
Reftype
DOI/URL URL DOI
Abstract
Nanoparticles are emerging transdermal delivery systems. Their size and surface properties determine their efficacy and efficiency to penetrate through the skin layers. This work utilizes three-dimensional (3D) bioprinting technology to generate a simplified artificial skin model to rapidly screen nanoparticles for their transdermal penetration ability. Specifically, this model is built through layer-by-layer alternate printing of blank collagen hydrogel and fibroblasts. Through controlling valve on-time, the spacing between printing lines could be accurately tuned, which could enable modulation of cell infiltration in the future. To confirm the effectiveness of this platform, a 3D construct with one layer of fibroblasts sandwiched between two layers of collagen hydrogel is used to screen silica nanoparticles with different surface charges for their penetration ability, with positively charged nanoparticles demonstrating deeper penetration, consistent with the observation from an existing study involving living skin tissue.
AUTHOR Geven, Mike A. and Sprecher, Christoph and Guillaume, Olivier and Eglin, David and Grijpma, Dirk W.
Title Micro-porous composite scaffolds of photo-crosslinked poly(trimethylene carbonate) and nano-hydroxyapatite prepared by low-temperature extrusion-based additive manufacturing [Abstract]
Year 2016
Journal/Proceedings Polymers for Advanced Technologies
Reftype
DOI/URL DOI
Abstract
Complex bony defects such as those of the orbital floor are challenging to repair. Additive manufacturing techniques open up possibilities for the fabrication of implants with a designed macro-porosity for the reconstruction of such defects. Apart from a designed macro-porosity for tissue ingrowth, a micro-porosity in the implant struts will be beneficial for nutrient diffusion, protein adsorption and drug loading and release. In this work, we report on a low-temperature extrusion-based additive manufacturing method for the preparation of composite photo-crosslinked structures of poly(trimethylene carbonate) with bone-forming nano-hydroxyapatite and noricaritin (derived from bone growth stimulating icariin). In this method, we extrude a dispersion of nano-hydroxyapatite and noricaritin particles in a solution of photo-crosslinkable poly(trimethylene carbonate) in ethylene carbonate into defined three-dimensional structures. The ethylene carbonate is subsequently crystallized and extracted after photo-crosslinking. We show that this results in designed macro-porous structures with micro-pores in the struts. The dispersion used to fabricate these structures shows favorable properties for extrusion-based processing, such as a sharp crystallization response and shear thinning. The formed photo-crosslinked materials have a micro-porosity of up to 48%, and the E modulus, ultimate tensile strength and toughness are in excess of 24 MPa, 2.0 N/mm2 and 113 N/mm2 respectively. A sustained release of noricaritin from these materials was also achieved. The results show that the technique described here is promising for the fabrication of micro-porous photo-crosslinked composite structures of poly(trimethylene carbonate) with nano-hydroxyapatite and that these may be applied in the reconstruction of orbital floor defects. Copyright © 2016 John Wiley & Sons, Ltd.
AUTHOR Wang, Weiguang and Caetano, Guilherme and Chiang, Wei-Hung and Sousa, Ana Leticia and Blaker, Jonny and Frade, M. A. R. C. O. and Frade, Cipriani and Jorge Bártolo, Paulo
Title Morphological, mechanical and biological assessment of PCL/pristine graphene scaffolds for bone regeneration [Abstract]
Year 2016
Journal/Proceedings International Journal of Bioprinting
Reftype
DOI/URL URL
Abstract
Scaffolds are physical substrates for cell attachment, proliferation, and differentiation, ultimately leading to the regeneration of tissues. They must be designed according to specific biomechanical requirements such as mechanical properties, surface characteristics, biodegradability, biocompatibility, and porosity. The optimal design of a scaffold for a specific tissue strongly depends on both materials and manufacturing processes. Polymeric scaffolds reinforced with electro-active particles could play a key role in tissue engineering by modulating cell proliferation and differentiation. This paper investigates the use of an extrusion additive manufacturing system to produce PCL/pristine graphene scaffolds for bone tissue applications. PCL/pristine graphene blends were prepared using a melt blending process. Scaffolds with regular and reproducible architecture were produced with different concentrations of pristine graphene. Scaffolds were evaluated from morphological, mechanical, and biological view. The results suggest that the addition of pristine graphene improves the mechanical performance of the scaffolds, reduces the hydrophobicity, and improves cell viability and proliferation.
AUTHOR Ng, Wei Long and Yeong, Wai Yee and Naing, May Win
Title Polyelectrolyte gelatin-chitosan hydrogel optimized for 3D bioprinting in skin tissue engineering [Abstract]
Year 2016
Journal/Proceedings International Journal of Bioprinting
Reftype
DOI/URL URL DOI
Abstract
Bioprinting is a promising automated platform that enables the simultaneous deposition of multiple types of cells and biomaterials to fabricate complex three-dimensional (3D) tissue constructs. Most of the previous bioprinting works focused on collagen-based biomaterial, which has poor printability and long crosslinking time. This posed a immerse challenge to create a 3D construct with pre-determined shape and configuration. There is a need for a functional material with good printability in order to fabricate a 3D skin construct. Recently, the use of chitosan for wound healing applications has attracted huge attention due to its attractive traits such as its antimicrobial properties and ability to trigger hemostasis. In this paper, we report the modification of chitosan-based biomaterials for functional 3D bioprinting. Modification to the chitosan was carried out via the oppositely charged functional groups from chitosan and gelatin at a specific pH of ~pH 6.5 to form polyelectrolyte complexes. The polyelectrolyte hydrogels were evaluated in terms of chemical interactions within polymer blend, rheological properties (viscosities, storage and loss modulus), printing resolution at varying pressures and feed rates and biocompatibility. The chitosan-based hydrogels formulated in this work exhibited good printability at room temperature, high shape fidelity of the printed 3D constructs and good biocompatibility with fibroblast skin cells.
AUTHOR Gross, Bethany and Lockwood, Sarah Y. and Spence, Dana M.
Title Recent Advances in Analytical Chemistry by 3D Printing
Year 2016
Journal/Proceedings Analytical Chemistry
Reftype
DOI/URL DOI
AUTHOR Håkansson, Karl M. O. and Henriksson, Ida C. and de la Peña Vázquez, Cristina and Kuzmenko, Volodymyr and Markstedt, Kajsa and Enoksson, Peter and Gatenholm, Paul
Title Solidification of 3D Printed Nanofibril Hydrogels into Functional 3D Cellulose Structures [Abstract]
Year 2016
Journal/Proceedings Advanced Materials Technologies
Reftype
DOI/URL DOI
Abstract
Cellulose nanofibrils isolated from trees have the potential to be used as raw material for future sustainable products within the areas of packaging, textiles, biomedical devices, and furniture. However, one unsolved problem has been to convert the nanofibril-hydrogel into a dry 3D structure. In this study, 3D printing is used to convert a cellulose nanofibril hydrogel into 3D structures with controlled architectures. Such structures collapse upon drying, but by using different drying processes the collapse can be controlled and the 3D structure can be preserved upon solidification. In addition, a conductive cellulose nanofibril ink is fabricated by adding carbon nanotubes. These findings enable the use of wood derived materials in 3D printing for fabrication of sustainable commodities such as packaging, textiles, biomedical devices, and furniture with conductive parts. Furthermore, with the introduction of biopolymers into 3D printing, the 3D printing technology itself can finally be regarded as sustainable.
AUTHOR Stichler, Simone and Jungst, Tomasz and Schamel, Martha and Zilkowski, Ilona and Kuhlmann, Matthias and Bock, Thomas and Blunk, Torsten and Tessmar, Jorg and Groll, Jurgen
Title Thiol-ene Clickable Poly(glycidol) Hydrogels for Biofabrication. [Abstract]
Year 2016
Journal/Proceedings Annals of biomedical engineering
Reftype
DOI/URL DOI
Abstract
In this study we introduce linear poly(glycidol) (PG), a structural analog of poly(ethylene glycol) bearing side chains at each repeating unit, as polymer basis for bioink development. We prepare allyl- and thiol-functional linear PG that can rapidly be polymerized to a three-dimensionally cross-linked hydrogel network via UV mediated thiol-ene click reaction. Influence of polymer concentration and UV irradiation on mechanical properties and swelling behavior was examined. Thiol-functional PG was synthesized in two structural variations, one containing ester groups that are susceptible to hydrolytic cleavage, and the other one ester-free and stable against hydrolysis. This allowed the preparation of degradable and non-degradable hydrogels. Cytocompatibility of the hydrogel was demonstrated by encapsulation of human bone marrow-derived mesenchymal stem cells (hBMSCs). Rheological properties of the hydrogels were adjusted for dispense plotting by addition of high molecular weight hyaluronic acid. The optimized formulation enabled highly reproducible plotting of constructs composed of 20 layers with an overall height of 3.90 mm.
AUTHOR Arslan-Yildiz, Ahu and Assal, Rami El and Chen, Pu and Guven, Sinan and Inci, Fatih and Demirci, Utkan
Title Towards artificial tissue models: past, present, and future of 3D bioprinting [Abstract]
Year 2016
Journal/Proceedings Biofabrication
Reftype
DOI/URL URL
Abstract
Regenerative medicine and tissue engineering have seen unprecedented growth in the past decade, driving the field of artificial tissue models towards a revolution in future medicine. Major progress has been achieved through the development of innovative biomanufacturing strategies to pattern and assemble cells and extracellular matrix (ECM) in three-dimensions (3D) to create functional tissue constructs. Bioprinting has emerged as a promising 3D biomanufacturing technology, enabling precise control over spatial and temporal distribution of cells and ECM. Bioprinting technology can be used to engineer artificial tissues and organs by producing scaffolds with controlled spatial heterogeneity of physical properties, cellular composition, and ECM organization. This innovative approach is increasingly utilized in biomedicine, and has potential to create artificial functional constructs for drug screening and toxicology research, as well as tissue and organ transplantation. Herein, we review the recent advances in bioprinting technologies and discuss current markets, approaches, and biomedical applications. We also present current challenges and provide future directions for bioprinting research.
AUTHOR Rimann, Markus and Laternser, Sandra and Keller, Hansj{"{o}}rg and Leupin, Olivier and Graf-Hausner, Ursula
Title 3D Bioprinted Muscle and Tendon Tissues for Drug Development
Year 2015
Journal/Proceedings {CHIMIA} International Journal for Chemistry
Reftype
DOI/URL DOI
AUTHOR Markstedt, Kajsa and Mantas, Athanasios and Tournier, Ivan and Mart{'{i}}nez {{'{A}}}vila, H{'{e}}ctor and H{"{a}}gg, Daniel and Gatenholm, Paul
Title 3D Bioprinting Human Chondrocytes with Nanocellulose-Alginate Bioink for Cartilage Tissue Engineering Applications [Abstract]
Year 2015
Journal/Proceedings Biomacromolecules
Reftype
DOI/URL DOI
Abstract
The introduction of 3D bioprinting is expected to revolutionize the field of tissue engineering and regenerative medicine. The 3D bioprinter is able to dispense materials while moving in X, Y, and Z directions, which enables the engineering of complex structures from the bottom up. In this study, a bioink that combines the outstanding shear thinning properties of nanofibrillated cellulose (NFC) with the fast cross-linking ability of alginate was formulated for the 3D bioprinting of living soft tissue with cells. Printability was evaluated with concern to printer parameters and shape fidelity. The shear thinning behavior of the tested bioinks enabled printing of both 2D gridlike structures as well as 3D constructs. Furthermore, anatomically shaped cartilage structures, such as a human ear and sheep meniscus, were 3D printed using MRI and CT images as blueprints. Human chondrocytes bioprinted in the noncytotoxic, nanocellulose-based bioink exhibited a cell viability of 73% and 86% after 1 and 7 days of 3D culture, respectively. On the basis of these results, we can conclude that the nanocellulose-based bioink is a suitable hydrogel for 3D bioprinting with living cells. This study demonstrates the potential use of nanocellulose for 3D bioprinting of living tissues and organs. The introduction of 3D bioprinting is expected to revolutionize the field of tissue engineering and regenerative medicine. The 3D bioprinter is able to dispense materials while moving in X, Y, and Z directions, which enables the engineering of complex structures from the bottom up. In this study, a bioink that combines the outstanding shear thinning properties of nanofibrillated cellulose (NFC) with the fast cross-linking ability of alginate was formulated for the 3D bioprinting of living soft tissue with cells. Printability was evaluated with concern to printer parameters and shape fidelity. The shear thinning behavior of the tested bioinks enabled printing of both 2D gridlike structures as well as 3D constructs. Furthermore, anatomically shaped cartilage structures, such as a human ear and sheep meniscus, were 3D printed using MRI and CT images as blueprints. Human chondrocytes bioprinted in the noncytotoxic, nanocellulose-based bioink exhibited a cell viability of 73% and 86% after 1 and 7 days of 3D culture, respectively. On the basis of these results, we can conclude that the nanocellulose-based bioink is a suitable hydrogel for 3D bioprinting with living cells. This study demonstrates the potential use of nanocellulose for 3D bioprinting of living tissues and organs.
AUTHOR Hockaday, Laura
Title 3D Bioprinting: A Deliberate Business
Year 2015
Journal/Proceedings Genetic Engineering & Biotechnology News
Reftype
DOI/URL DOI
AUTHOR Ho, Chee Meng Benjamin and Ng, Sum Huan and Yoon, Yong-Jin
Title A review on 3D printed bioimplants [Abstract]
Year 2015
Journal/Proceedings International Journal of Precision Engineering and Manufacturing
Reftype
DOI/URL DOI
Abstract
Additive manufacturing (AM) also known as 3D printing have been making inroads into medical applications such as surgical models and tools, tooling equipment, medical devices. One key area researchers are looking into is bioimplants. With the improvement and development of AM technologies, many different bioimplants can be made using 3D printing. Different biomaterials and various AM technologies can be used to create customized bioimplants to suit the individual needs. With the aid of 3D printing this could lead to new foam and design of bioimplants in the near further. Therefore, the purpose of this review articles is to (1) Describe the various AM technologies and process used to make bioimplants, (2) Different types of bioimplants printed with AM and (3) Discuss some of the challenges and future developments for 3D printed bioimplants.
AUTHOR Schacht, Kristin and J{"{u}}ngst, Tomasz and Schweinlin, Matthias and Ewald, Andrea and Groll, J{"{u}}rgen and Scheibel, Thomas
Title Biofabrication of Cell-Loaded 3D Spider Silk Constructs [Abstract]
Year 2015
Journal/Proceedings Angewandte Chemie International Edition
Reftype
DOI/URL DOI
Abstract
Biofabrication is an emerging and rapidly expanding field of research in which additive manufacturing techniques in combination with cell printing are exploited to generate hierarchical tissue-like structures. Materials that combine printability with cytocompatibility, so called bioinks, are currently the biggest bottleneck. Since recombinant spider silk proteins are non-immunogenic, cytocompatible, and exhibit physical crosslinking, their potential as a new bioink system was evaluated. Cell-loaded spider silk constructs can be printed by robotic dispensing without the need for crosslinking additives or thickeners for mechanical stabilization. Cells are able to adhere and proliferate with good viability over at least one week in such spider silk scaffolds. Introduction of a cell-binding motif to the spider silk protein further enables fine-tuned control over cell–material interactions. Spider silk hydrogels are thus a highly attractive novel bioink for biofabrication.
AUTHOR Kesti, Matti and Eberhardt, Christian and Pagliccia, Guglielmo and Kenkel, David and Grande, Daniel and Boss, Andreas and Zenobi-Wong, Marcy
Title Bioprinting Complex Cartilaginous Structures with Clinically Compliant Biomaterials [Abstract]
Year 2015
Journal/Proceedings Advanced Functional Materials
Reftype
DOI/URL DOI
Abstract
Bioprinting is an emerging technology for the fabrication of patient-specific, anatomically complex tissues and organs. A novel bioink for printing cartilage grafts is developed based on two unmodified FDA-compliant polysaccharides, gellan and alginate, combined with the clinical product BioCartilage (cartilage extracellular matrix particles). Cell-friendly physical gelation of the bioink occurs in the presence of cations, which are delivered by co-extrusion of a cation-loaded transient support polymer to stabilize overhanging structures. Rheological properties of the bioink reveal optimal shear thinning and shear recovery properties for high-fidelity bioprinting. Tensile testing of the bioprinted grafts reveals a strong, ductile material. As proof of concept, 3D auricular, nasal, meniscal, and vertebral disk grafts are printed based on computer tomography data or generic 3D models. Grafts after 8 weeks in vitro are scanned using magnetic resonance imaging and histological evaluation is performed. The bioink containing BioCartilage supports proliferation of chondrocytes and, in the presence of transforming growth factor beta-3, supports strong deposition of cartilage matrix proteins. A clinically compliant bioprinting method is presented which yields patient-specific cartilage grafts with good mechanical and biological properties. The versatile method can be used with any type of tissue particles to create tissue-specific and bioactive scaffolds.
AUTHOR Horvath, Lenke and Umehara, Yuki and Jud, Corinne and Blank, Fabian and Petri-Fink, Alke and Rothen-Rutishauser, Barbara
Title Engineering an in vitro air-blood barrier by 3D bioprinting. [Abstract]
Year 2015
Journal/Proceedings Scientific reports
Reftype
DOI/URL URL
Abstract
Intensive efforts in recent years to develop and commercialize in vitro alternatives in the field of risk assessment have yielded new promising two- and three dimensional (3D) cell culture models. Nevertheless, a realistic 3D in vitro alveolar model is not available yet. Here we report on the biofabrication of the human air-blood tissue barrier analogue composed of an endothelial cell, basement membrane and epithelial cell layer by using a bioprinting technology. In contrary to the manual method, we demonstrate that this technique enables automatized and reproducible creation of thinner and more homogeneous cell layers, which is required for an optimal air-blood tissue barrier. This bioprinting platform will offer an excellent tool to engineer an advanced 3D lung model for high-throughput screening for safety assessment and drug efficacy testing.
AUTHOR Moussa, Mira and Carrel, Jean-Pierre and Scherrer, Susanne and Cattani-Lorente, Maria and Wiskott, Anselm and Durual, Stéphane
Title Medium-Term Function of a 3D Printed TCP/HA Structure as a New Osteoconductive Scaffold for Vertical Bone Augmentation: A Simulation by BMP-2 Activation [Abstract]
Year 2015
Journal/Proceedings Materials
Reftype
DOI/URL URL DOI
Abstract
Introduction: A 3D-printed construct made of orthogonally layered strands of tricalcium phosphate (TCP) and hydroxyapatite has recently become available. The material provides excellent osteoconductivity. We simulated a medium-term experiment in a sheep calvarial model by priming the blocks with BMP-2. Vertical bone growth/maturation and material resorption were evaluated. Materials and methods: Titanium hemispherical caps were filled with either bare- or BMP-2 primed constructs and placed onto the calvaria of adult sheep (n = 8). Histomorphometry was performed after 8 and 16 weeks. Results: After 8 weeks, relative to bare constructs, BMP-2 stimulation led to a two-fold increase in bone volume (Bare: 22% ± 2.1%; BMP-2 primed: 50% ± 3%) and a 3-fold decrease in substitute volume (Bare: 47% ± 5%; BMP-2 primed: 18% ± 2%). These rates were still observed at 16 weeks. The new bone grew and matured to a haversian-like structure while the substitute material resorbed via cell- and chemical-mediation. Conclusion: By priming the 3D construct with BMP-2, bone metabolism was physiologically accelerated, that is, enhancing vertical bone growth and maturation as well as material bioresorption. The scaffolding function of the block was maintained, leaving time for the bone to grow and mature to a haversian-like structure. In parallel, the material resorbed via cell-mediated and chemical processes. These promising results must be confirmed in clinical tests.
AUTHOR Kokkinis, Dimitri and Schaffner, Manuel and Studart, Andr{'{e}} R.
Title Multimaterial magnetically assisted 3D printing of composite materials
Year 2015
Journal/Proceedings Nature Communications
Reftype
DOI/URL DOI
AUTHOR M{"{u}}ller, Michael and Becher, Jana and Schnabelrauch, Matthias and Zenobi-Wong, Marcy
Title Nanostructured Pluronic hydrogels as bioinks for 3D bioprinting [Abstract]
Year 2015
Journal/Proceedings Biofabrication
Reftype
DOI/URL URL
Abstract
Bioprinting is an emerging technology in the field of tissue engineering as it allows the precise positioning of biologically relevant materials in 3D, which more resembles the native tissue in our body than current homogenous, bulk approaches. There is however a lack of materials to be used with this technology and materials such as the block copolymer Pluronic have good printing properties but do not allow long-term cell culture. Here we present an approach called nanostructuring to increase the biocompatibility of Pluronic gels at printable concentrations. By mixing acrylated with unmodified Pluronic F127 it was possible to maintain the excellent printing properties of Pluronic and to create stable gels via UV crosslinking. By subsequent elution of the unmodified Pluronic from the crosslinked network we were able to increase the cell viability of encapsulated chondrocytes at day 14 from 62% for a pure acrylated Pluronic hydrogel to 86% for a nanostructured hydrogel. The mixed Pluronic gels also showed good printability when cells where included in the bioink. The nanostructured gels were, with a compressive modulus of 1.42 kPa, mechanically weak, but we were able to increase the mechanical properties by the addition of methacrylated hyaluronic acid. Our nanostructuring approach enables Pluronic hydrogels to have the desired set of properties in all stages of the bioprinting process.
AUTHOR Rimann, Markus and Bono, Epifania and Annaheim, Helene and Bleisch, Matthias and Graf-Hausner, Ursula
Title Standardized 3D Bioprinting of Soft Tissue Models with Human Primary Cells. [Abstract]
Year 2015
Journal/Proceedings Journal of laboratory automation
Reftype
DOI/URL DOI
Abstract
Cells grown in 3D are more physiologically relevant than cells cultured in 2D. To use 3D models in substance testing and regenerative medicine, reproducibility and standardization are important. Bioprinting offers not only automated standardizable processes but also the production of complex tissue-like structures in an additive manner. We developed an all-in-one bioprinting solution to produce soft tissue models. The holistic approach included (1) a bioprinter in a sterile environment, (2) a light-induced bioink polymerization unit, (3) a user-friendly software, (4) the capability to print in standard labware for high-throughput screening, (5) cell-compatible inkjet-based printheads, (6) a cell-compatible ready-to-use BioInk, and (7) standard operating procedures. In a proof-of-concept study, skin as a reference soft tissue model was printed. To produce dermal equivalents, primary human dermal fibroblasts were printed in alternating layers with BioInk and cultured for up to 7 weeks. During long-term cultures, the models were remodeled and fully populated with viable and spreaded fibroblasts. Primary human dermal keratinocytes were seeded on top of dermal equivalents, and epidermis-like structures were formed as verified with hematoxylin and eosin staining and immunostaining. However, a fully stratified epidermis was not achieved. Nevertheless, this is one of the first reports of an integrative bioprinting strategy for industrial routine application.
AUTHOR Carrel, Jean-Pierre and Wiskott, Anselm and Moussa, Mira and Rieder, Philippe and Scherrer, Susanne and Durual, St{'{e}}phane
Title A 3D printed TCP/HA structure as a new osteoconductive scaffold for vertical bone augmentation [Abstract]
Year 2014
Journal/Proceedings Clinical Oral Implants Research
Reftype
DOI/URL DOI
Abstract
Introduction OsteoFlux® (OF) is a 3D printed porous block of layered strands of tricalcium phosphate (TCP) and hydroxyapatite. Its porosity and interconnectivity are defined, and it can be readily shaped to conform the bone bed's morphology. We investigated the performance of OF as a scaffold to promote the vertical growth of cortical bone in a sheep calvarial model. Materials and methods Six titanium hemispheres were filled with OF, Bio-Oss (particulate bovine bone, BO), or Ceros (particulate TCP, CO) and placed onto the calvaria of 12 adult sheep (6 hemispheres/sheep). Histomorphometric analyses were performed after 8 and 16 weeks. Results OF led to substantial vertical bone growth by 8 weeks and outperformed BO and CO by a factor 2 yielding OF 22% ± 2.1; BO 11.5% ± 1.9; and CO 12.9% ± 2.1 total new bone. 3 mm away from the bony bed, OF led to a fourfold increase in new bone relative to BO and CO (n = 8, P < 0.002). At 16 weeks, OF, BO, and CO behaved similarly and showed marked new bone synthesis. A moderate degradation was observed at 16 weeks for all bone substitutes. Conclusion When compared to existing bone substitutes, OF enhances vertical bone growth during the first 2 months after implantation in a sheep calvarial model. The controlled porous structure translated in a high osteoconductivity and resulted in a bone mass 3 mm above the bony bed that was four times greater than that obtained with standard substitutes. These results are promising but must be confirmed in clinical tests.
AUTHOR Kesti, Matti and M{"{u}}ller, Michael and Becher, Jana and Schnabelrauch, Matthias and D{textquoteright}Este, Matteo and Eglin, David and Zenobi-Wong, Marcy
Title A versatile bioink for three-dimensional printing of cellular scaffolds based on thermally and photo-triggered tandem gelation [Abstract]
Year 2014
Journal/Proceedings Acta Biomaterialia
Reftype
DOI/URL URL DOI
Abstract
Abstract Layer-by-layer bioprinting is a logical choice for the fabrication of stratified tissues like articular cartilage. Printing of viable organ replacements, however, is dependent on bioinks with appropriate rheological and cytocompatible properties. In cartilage engineering, photocrosslinkable glycosaminoglycan-based hydrogels are chondrogenic, but alone have generally poor printing properties. By blending the thermoresponsive polymer poly(N-isopropylacrylamide) grafted hyaluronan (HA-pNIPAAM) with methacrylated hyaluronan (HAMA), high-resolution scaffolds with good viability were printed. HA-pNIPAAM provided fast gelation and immediate post-printing structural fidelity, while {HAMA} ensured long-term mechanical stability upon photocrosslinking. The bioink was evaluated for rheological properties, swelling behavior, printability and biocompatibility of encapsulated bovine chondrocytes. Elution of HA-pNIPAAM from the scaffold was necessary to obtain good viability. HA-pNIPAAM can therefore be used to support extrusion of a range of biopolymers which undergo tandem gelation, thereby facilitating the printing of cell-laden, stratified cartilage constructs with zonally varying composition and stiffness.
AUTHOR Rezende, R. A. and Selishchev, S. V. and Kasyanov, V. A. and da Silva, J. V. L. and Mironov, V. A.
Title An Organ Biofabrication Line: Enabling Technology for Organ Printing. Part II: from Encapsulators to Biofabrication Line [Abstract]
Year 2013
Journal/Proceedings Biomedical Engineering
Reftype
DOI/URL DOI
Abstract
The first part of this review was published in Biomedical Engineering, No. 3, 2013. This second part discusses development and application of tissue spheroid encapsulators, robotics bioprinters, bioreactors, and problems of computer design of biofabrication lines.
AUTHOR M{"{u}}ller, Michael and Becher, Jana and Schnabelrauch, Matthias and Zenobi-Wong, Marcy
Title Printing thermoresponsive reverse molds for the creation of patterned two-component hydrogels for 3D cell culture. [Abstract]
Year 2013
Journal/Proceedings Journal of visualized experiments : JoVE
Reftype
DOI/URL URL
Abstract
Bioprinting is an emerging technology that has its origins in the rapid prototyping industry. The different printing processes can be divided into contact bioprinting(1-4) (extrusion, dip pen and soft lithography), contactless bioprinting(5-7) (laser forward transfer, ink-jet deposition) and laser based techniques such as two photon photopolymerization(8). It can be used for many applications such as tissue engineering(9-13), biosensor microfabrication(14-16) and as a tool to answer basic biological questions such as influences of co-culturing of different cell types(17). Unlike common photolithographic or soft-lithographic methods, extrusion bioprinting has the advantage that it does not require a separate mask or stamp. Using CAD software, the design of the structure can quickly be changed and adjusted according to the requirements of the operator. This makes bioprinting more flexible than lithography-based approaches. Here we demonstrate the printing of a sacrificial mold to create a multi-material 3D structure using an array of pillars within a hydrogel as an example. These pillars could represent hollow structures for a vascular network or the tubes within a nerve guide conduit. The material chosen for the sacrificial mold was poloxamer 407, a thermoresponsive polymer with excellent printing properties which is liquid at 4 degrees C and a solid above its gelation temperature ~20 degrees C for 24.5% w/v solutions(18). This property allows the poloxamer-based sacrificial mold to be eluted on demand and has advantages over the slow dissolution of a solid material especially for narrow geometries. Poloxamer was printed on microscope glass slides to create the sacrificial mold. Agarose was pipetted into the mold and cooled until gelation. After elution of the poloxamer in ice cold water, the voids in the agarose mold were filled with alginate methacrylate spiked with FITC labeled fibrinogen. The filled voids were then cross-linked with UV and the construct was imaged with an epi-fluorescence microscope.
AUTHOR Neubauer, Vanessa J. and Trossmann, Vanessa T. and Jacobi, Sofia and Döbl, Annika and Scheibel, Thomas
Title Aqueous-Organic Solvent Derived Recombinant Spider Silk Gels as Depots for Drugs [Abstract]
Year 2
Journal/Proceedings Angewandte Chemie International Edition
Reftype
DOI/URL DOI
Abstract
Hydrogels are widely used in various biomedical applications, as they cannot only serve as materials for biofabrication but also as depots for the administration of drugs. However, the possibilities of formulation of water-insoluble drugs in hydrogels are rather limited. In this study, we assembled recombinant spider silk gels using a new processing route with aqueous-organic co-solvents, and the properties of these gels could be controlled by the choice of the co-solvent. The presence of the organic co-solvent further enabled the incorporation of hydrophobic drugs as exemplary shown for 6-mercaptopurine. The developed gels showed shear-thinning behaviour and could be easily injected to serve e.g. as drug depots and could even be 3D printed to serve as scaffolds for biofabrication. With this new processing route, the formulation of water-insoluble drugs in spider silk-based depots is possible, circumventing common pharmaceutical solubility issues.
AUTHOR Quadri, Faisal and Soman, Soja Saghar and Vijayavenkataraman, Sanjairaj
Title Progress in cardiovascular bioprinting [Abstract]
Year 2
Journal/Proceedings Artificial Organs
Reftype
DOI/URL DOI
Abstract
Abstract Cardiovascular disease has been the leading cause of death globally for the past 15 years. Following a major cardiac disease episode, the ideal treatment would be the replacement of the damaged tissue, due to the limited regenerative capacity of cardiac tissues. However, we suffer from a chronic organ donor shortage which causes approximately 20 people to die each day waiting to receive an organ. Bioprinting of tissues and organs can potentially alleviate this burden by fabricating low cost tissue and organ replacements for cardiac patients. Clinical adoption of bioprinting in cardiovascular medicine is currently limited by the lack of systematic demonstration of its effectiveness, high costs, and the complexity of the workflow. Here, we give a concise review of progress in cardiovascular bioprinting and its components. We further discuss the challenges and future prospects of cardiovascular bioprinting in clinical applications.